This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Atoms, elements and compounds) of the Cambridge IGCSE Chemistry (0620) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE State the relative charges and approximate relative masses of protons, neutrons and electrons Define proton number (atomic number) as the number of protons in the nucleus of an atom Define nucleon number (mass number) as the total number of protons and neutrons in the nucleus of an atom Define isotopes as atoms of the same element which have the same proton number but a different nucleon number Describe the build-up of electrons in ‘shells’ and understand the significance of the noble gas electronic structures and of the outer shell electrons. Describe an alloy, such as brass, as a mixture of a metal with other elements Describe the formation of ions by electron loss or gain Describe the formation of ionic bonds between elements from Groups I and VII Describe the giant covalent structures of graphite and diamond Relate their structures to their uses, e.g. graphite as a lubricant and a conductor, and diamond in cutting tools SUPPLEMENT Describe the formation of ionic bonds between metallic and non-metallic elements Explain the differences in melting point and boiling point of ionic and covalent compounds in terms of attractive forces The students will thoroughly enjoy the range of activities, which include quiz competitions such as “The name’s BOND” where they compete to be the 1st to name the type of bond being described whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 7 (Chemical reactions) of the CIE IGCSE Chemistry (0620) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE Describe and explain the effect of concentration, particle size, catalysts (including enzymes) and temperature on the rate of reactions Interpret data obtained from experiments concerned with rate of reaction Understand that some chemical reactions can be reversed by changing the reaction conditions Define oxidation and reduction in terms of oxygen loss/gain. SUPPLEMENT Devise and evaluate a suitable method for investigating the effect of a given variable on the rate of a reaction Describe and explain the effects of temperature and concentration in terms of collisions between reacting particles. (An increase in temperature causes an increase in collision rate and more of the colliding molecules have sufficient energy (activation energy) to react whereas an increase in concentration only causes an increase in collision rate.) Predict the effect of changing the conditions (concentration, temperature and pressure) on other reversible reactions Demonstrate knowledge and understanding of the concept of equilibrium Define redox in terms of electron transfer Define oxidising agent as a substance which oxidises another substance during a redox reaction. Define reducing agent as a substance which reduces another substance during a redox reaction. Identify oxidising agents and reducing agents from simple equations The students will thoroughly enjoy the range of activities, which include quiz competitions such as “FROM NUMBERS 2 LETTERS” where they have to compete to be the 1st to get an important abbreviation whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quiz tasks and quiz competitions to enable students to assess their understanding of the content within topic 14 (Organic chemistry) of the CIE IGCSE Chemistry (0620) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE Name and draw the structures of methane, ethane, ethene, ethanol, ethanoic acid and the products of their reactions State the type of compound present, given a chemical name ending in -ane, -ene, -ol, or -oic acid or a molecular structure Describe petroleum as a mixture of hydrocarbons and its separation into useful fractions by fractional distillation Describe the properties of molecules within a fraction Describe the concept of homologous series as a ‘family’ of similar compounds with similar chemical properties due to the presence of the same functional group Describe the properties of alkanes Describe the bonding in alkanes Describe the manufacture of alkenes and of hydrogen by cracking Distinguish between saturated and unsaturated hydrocarbons: Define polymers as large molecules built up from small units (monomers) SUPPLEMENT Name and draw the structures of the unbranched alkanes, alkenes (not cis-trans), alcohols and acids containing up to four carbon atoms per molecule Name and draw the structural formulae of the esters which can be made from unbranched alcohols and carboxylic acids, each containing up to four carbon atoms Recall that the compounds in a homologous series have the same general formula Understand that different polymers have different units and/or different linkages Describe the structure of proteins The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Are you on FORM” where they compete to be the 1st to name an organic compound from its formula whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 7 (Rates of reaction and energy changes) of the Edexcel GCSE Chemistry specification. The specification points that are covered in this revision lesson include: Suggest practical methods for determining the rate of a given reaction Explain how reactions occur when particles collide and that rates of reaction are increased when the frequency and/or energy of collisions is increased Explain the effects on rates of reaction of changes in temperature, concentration, surface area to volume ratio of a solid and pressure (on reactions involving gases) in terms of frequency and/or energy of collisions between particles Describe a catalyst as a substance that speeds up the rate of a reaction without altering the products of the reaction, being itself unchanged chemically and in mass at the end of the reaction Explain how the addition of a catalyst increases the rate of a reaction in terms of activation energy Describe an exothermic change or reaction as one in which heat energy is given out Describe an endothermic change or reaction as one in which heat energy is taken in Recall that the breaking of bonds is endothermic and the making of bonds is exothermic Recall that the overall heat energy change for a reaction is: a exothermic if more heat energy is released in forming bonds in the products than is required in breaking bonds in the reactants b endothermic if less heat energy is released in forming bonds in the products than is required in breaking bonds in the reactants Calculate the energy change in a reaction given the energies of bonds (in kJ mol–1) Explain the term activation energy Draw and label reaction profiles for endothermic and exothermic reactions, identifying activation energy The students will thoroughly enjoy the range of activities, which includes a quiz competition called “E NUMBERS” where they have to recognise the differences between endothermic and exothermic reactions whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quiz tasks and quiz competitions to enable students to assess their understanding of the content within topic 6 (Chemical energetics) of the Cambridge IGCSE Chemistry (0620) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE Describe the meaning of exothermic and endothermic reactions Interpret energy level diagrams showing exothermic and endothermic reactions Describe the release of heat energy by burning fuels State the use of hydrogen as a fuel SUPPLEMENT Describe bond breaking as an endothermic process and bond forming as an exothermic process Draw and label energy level diagrams for exothermic and endothermic reactions using data provided Calculate the energy of a reaction using bond energies Describe the use of hydrogen as a fuel reacting with oxygen to generate electricity in a fuel cell. The students will thoroughly enjoy the range of activities, which include quiz competitions such as “E NUMBERS” where they have to recognise the differences between endothermic and exothermic reactions whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This revision lesson contains a motivating and engaging powerpoint (67 slides) and associated worksheets which have been designed to challenge student knowledge of the Periodic Table. The lesson involves a wide range of activities which include exam questions with clear answers to allow students to self-assess, quiz competitions and differentiated tasks. The students will enjoy the transitions between the different activities whilst crucially being able to evaluate their understanding of this key topic in Chemistry. Deliberately, the lesson hasn’t been written for any particular exam board or exclusively for Combined Science or Chemistry, but instead it covers the topics which are shown below and this will allow teachers to pick and choose which parts they want to do in a particular lesson. Properties of the alkali metals (group I) Properties of the halogens (group VII) Properties of the noble gases (group 0) Formation of ionic compounds between group I and VII elements Reactivity of the alkali metals and the halogens Displacement reactions of the halogens The transition elements Organisation of the Periodic Table Predicting properties of the unknown or rare elements As the title suggests, the content of this lesson has been written to be GCSE standard and therefore is most suitable for use with 14 - 16 year olds. However, it could be used with younger students who are doing work on the topic and want to challenge themselves

A fully resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within TOPIC 9 (Chemistry of the atmosphere) of the AQA GCSE Chemistry specification (specification point C4.9). The topics that are tested within the lesson include: The proportion of different gases in the atmosphere The Earth’s early atmosphere Greenhouse gases Atmospheric pollutants Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require further attention

A fully resourced lesson which includes an informative lesson presentation (34 slides) and differentiated worksheets that show students how to convert between units so they are confident to carry out these conversions when required in Science questions. The conversions which are regularly seen at GCSE are covered as well as some more obscure ones which students have to be aware of. A number of quiz competitions are used throughout the lesson to maintain motivation and to allow the students to check their progress in an engaging way This lesson has been designed for GCSE students but is suitable for KS3

A fully-resourced lesson that includes a lesson presentation (20 slides) and a differentiated worksheet. The lesson uses a step-by-step method to guide students through the process of writing net ionic equations. Students will learn the meaning of a spectator ion and be able to identify them within an equation so that they can be removed when writing the final net ionic equation. The lesson focuses on writing these equations for neutralisation and precipitation reactions, with the former being a very common question in assessments. This lesson has been written for GCSE students (14 - 16 year olds)

A fully resourced lesson, which includes differentiated worksheets, and guides the students through the process of extracting aluminium. There are close links throughout the lesson to the reactivity series and electrolysis so that the students are able to understand how the knowledge of all of these is brought together. Students will meet cryolite and recognise why this is used in the process and will finish off by writing half equations to show the products at the electrodes. This lesson has been designed for GCSE students (14 - 16 year olds in the UK)

An engaging lesson which looks at the properties of the Transition metals of the Periodic Table and ultimately compares these properties against other metals, such as the Alkali metals. Through the use of a range of motivating tasks and quiz competitions, students will learn that the transition metals form coloured compounds, have a number of ion charges, act as catalysts and are harder, stronger but less reactive than group 1. This lesson has been written for GCSE students (14 - 16 year olds) but is suitable for younger students who are looking at the patterns and trends in the Periodic Table

This is a detailed and engaging lesson presentation which focuses on the properties of the elements found in group 1 of the Periodic Table, the alkali metals. Students are challenged throughout the lesson to be able to link their observations of the reactions to the properties. Once they have learnt that the reactivity increases as they move down the group, time is taken to go over this in detail so that students can explain why sodium is more reactive than lithium (and so on) in terms of electron configuration. Progress checks are embedded throughout the lesson so that students have the opportunity to assess their understanding. This lesson has been designed for GCSE students (14 - 16 year olds in the UK) but is suitable for younger students who may be carrying out a project on the Periodic Table

This is a fully-resourced lesson which looks at the properties of group 0 of the Periodic Table, the Noble Gases, and includes a lesson presentation (29 slides) and an associated worksheet. The lesson uses a range of engaging quiz competitions to enable the students to understand why these elements do not react. Other properties such as their boiling points are explored and there is continual reference to the other groups of elements so that students can make clear comparisons. This lesson has been designed for GCSE students (14 - 16 year olds in the UK), but it is also suitable for younger students who might be carrying out a project on the Periodic Table

A fully-resourced lesson that teaches students how to calculate the concentration of a solution in the units grams per decimetres cubed and mol per decimetre cubed. The lesson includes a concise but detailed lesson presentation (20 slides) and a set of differentiated questions. The lesson begins by introducing students to volumes in decimetres cubed and time is taken to ensure that students are able to convert to this measurement. Moving forwards, students are guided through how to calculate the concentration in both units through the use of worked examples. Differentiated questions are available so that all abilities can access the work. This lesson has been written for GCSE students (14 - 16 year olds in the UK) but could be used with students who are beginning their A level Chemistry studies

A fully-resourced lesson that looks at a number of the allotropes of carbon which need to be known for GCSE Science. The lesson includes an engaging lesson presentation (40 slides) and associated worksheets. The lesson begins by recalling the definition of an allotrope. Students are then introduced to graphene and will understand how this is related to graphite and know the properties of these two materials that are shared. Time is taken to ensure that students can explain why graphene is able to conduct electricity. Moving forwards, students will meet the family of allotropes known as the fullerenes and will see some important details about a few of these. This lesson has been written for students studying GCSE (14 - 16 year olds in the UK).

An engaging lesson presentation (37 slides) which gets students to test their practical skills by carrying out the four identification tests for oxygen, hydrogen, carbon dioxide and chlorine. The lesson begins by using a competition called “Guess the gas” where students have to used clues to identify the four colourless gases which will be used in the lesson. Moving forwards, students will meet the pieces of equipment that will be used in these tests. Practical instructions for each of the tests are included in the lesson so that students can produce the gas and then carry out the test. There are regular progress checks throughout the lesson so that students can assess their understanding. This lesson is suitable for both KS3 and GCSE students

A fully-resourced lesson which guides students through using moles to calculate the mass of a substance in a reaction. The lesson includes a detailed lesson presentation (22 slides) and associated worksheets which are used to check the skills and understanding of the students. The lesson begins by introducing the students to the three steps involved in a calculating mass question. These skills include calculating the relative formula mass and identifying molar ratios in equations to calculate amounts so time is taken to recap on how this is done before students are given the opportunity to try some progress check questions. A worked example brings these three steps together to guide the students to the final answer. The final task involves 4 questions where students are challenged to apply their new-found knowledge. This lesson has been written for GCSE students (14 - 16 year olds in the UK)

A fully-resourced lesson which looks at the gaseous reversible reaction known as the Haber Process and then explores and explains why the specific conditions are chosen for this reaction. The lesson includes a detailed lesson presentation (29 slides) and associated worksheets which are differentiated. The lesson begins by challenging the students to use a description of the reaction to complete the balanced symbol equation. A quiz competition involving both Chemistry and Maths skills is used to reveal the temperature and pressure which are chosen for this reaction. Students will learn that this only produces a yield of 30% and therefore are encouraged to question why these conditions are chosen. In doing so, they are made to wear two “hats”, so that they consider it from both a Science angle but also a business angle. Their knowledge of reversible reactions and the effect of changing either the temperature or the pressure on the position of the equilibrium are constantly challenged and then checked through a range of progress check questions. As a result of this lesson, students will understand that these conditions are a compromise and be able to explain why. This lesson has been designed for GCSE students (14 - 16 year olds in the UK).

A fully-resourced lesson which guides students through drawing, writing and recognising the electronic configurations of atoms and ions. The lesson includes an engaging lesson presentation (33 slides), an associated worksheet and a competition worksheet. The lesson begins by introducing the students to the number of electrons that can be held on the first three electron shells. They are then shown how to draw an electronic configuration and write this in brackets form. Students are given the opportunity to apply this knowledge by drawing the configuration of first 20 elements of the Periodic Table. Moving forwards, students are guided to enable them to discover how the electron configuration is linked to the position of an atom in the Periodic Table. The remainder of the lesson focuses on ions and how the configuration of these substances can be recognised. Some time is taken to explain how ions are formed from atoms and the lesson finishes with a competition which challenges students to identify atoms or ions from their configurations to form a word. There are regular progress checks throughout the lesson to allow the students to check on their understanding and a range of quiz competitions to maintain engagement. This lesson has been written for GCSE students but could be used with younger students, especially the initial part of the lesson on atoms and the link to the Periodic Table

A concise lesson presentation (21 slides) which uses a range of methods to allow students to discover how to draw dot and cross diagrams for covalent structures. The lesson begins by challenging the students to recall their knowledge of electronic structure to show the outer shell of two specified atoms. They will then see how it is possible for both of these atoms to get full outer shells by sharing as happens in this type of bonding. A few more examples are used to consolidate this understanding before quick competition is used to check the understanding so far. Moving forwards, a step by step guide shows students how to draw dot and cross diagrams using the same techniques as was utilised with the hulas. This lesson has been written for GCSE students but could be used with higher ability KS3 students.