This is a fully-resourced revision lesson that could be used over a series of lessons to help students to revise and assess their knowledge of the content that is found in topics P1 (Energy), P2 (Electricity), P3 (Particle model of matter) and P4 (Atomic structure) of the AQA GCSE Combined Science specification and will be assessed on PAPER 5. This revision lesson uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to cover the following sub-topics and specification points: Energy stores and systems Changes in energy Energy changes in systems Standard circuit diagram symbols Electrical charge and current Current, resistance and potential difference Series and parallel circuits Power Specific heat capacity The structure of an atom Mass number, atomic number and isotopes The development of the model of the atom Radioactive decay and nuclear radiation Nuclear equations Half-lives This lesson contains a big emphasis on the mathematical calculations that will be involved in these exams, and as a result students are challenged to recall the equations and to apply them. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams. A lot of the tasks have been differentiated so that students of all abilities can access the work and be challenged appropriately.

This is an engaging and fully resourced REVISION lesson which uses a range of exam questions, understanding checks, quick differentiated tasks and quiz competitions to enable students to assess their understanding of the content within topic 4 (Atomic structure) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Students should know that atoms are very small, having a radius of about 1 × 10-10 metres. Students should know that the basic structure of an atom is a positively charged nucleus composed of both protons and neutrons surrounded by negatively charged electrons Students should be able to use the atomic number and mass number and understand how these differ in isotopes Students should know the key stages in the development of the model of the atom and the main pieces of evidence that were found Students should know that some atomic nuclei are unstable and that the nucleus gives out radiation as it changes to become more stable. Students should know the penetrating and ionising power and range in air of the alpha particles, beta particles and gamma rays Students should be able to represent decay with equations and be able to describe the effect on the atomic and mass number Students should be able to determine the half-life of a radioactive isotope from given information. Students should be able to describe nuclear fission and fusion The students will thoroughly enjoy the range of activities, which include quiz competitions such as “It’s as easy as ABG” where they have to compete to be the 1st to work out the word formed from the letters of the different types of radiation whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

An engaging lesson which uses a range of tasks to ensure that students understand the meaning of the term, background radiation, and are able to name a number of sources of this type of radiation. The start of the lesson focuses on the definition of background radiation and the idea that is all around us is revisited again a number of times during the lesson. Through a range of activities and discussion points, students will meet the different sources as well as the % that they each contribute. It seemed appropriate to challenge some mathematical and scientific skills at this point so students will represent the data in a pie chart form. Related topics are discussed such as Chernobyl. Progress checks are written into the lesson at regular intervals so the students can constantly assess their understanding. This lesson is designed for GCSE students.

An engaging lesson presentation (78 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within module P4 (Waves and radioactivity) of the OCR Gateway A GCSE Combined Science specification. The topics that are tested within the lesson include: Waves and their properties Wave velocity Electromagnetic waves Atoms and isotopes Alpha, beta, gamma Nuclear equations Half-life Radiation and the human body Students will be engaged through the numerous activities including quiz rounds like “Tell EM the Word” and “Take the HOTSEAT” whilst crucially being able to recognise those areas which need further attention

A resourced lesson which looks at calculating acceleration using the (v-u)/t equation. This lesson includes an engaging lesson presentation (26 slides) and a worksheet of questions that can be used for homework or during the lesson. The lesson begins by looking at the actual meaning of acceleration, ensuring that students understand it is a rate and therefore recognise the units as a result. A number of engaging activities are included in the lesson, such as the ACCELERATION OLYMPICS, to maintain motivation. Students are shown how to rearrange the equation to make velocity or time the subject and then challenged to apply these in a series of questions. Deceleration is briefly mentioned at the end of the lesson. This lesson has been primarily designed for students studying GCSE (14 - 16 year olds in the UK) but it is suitable for students at KS3 too.

A fully-resourced lesson which focuses on using the kinetic energy equation to calculate energy, mass and speed. The lesson includes a lesson presentation (23 slides) which guides students through the range of calculations and accompanying worksheets which are differentiated. The lesson begins with the students being drip fed the equation so they are clear on the different factors involved. They are challenged to predict whether increasing the mass or increasing the speed will have a greater effect on the kinetic energy before testing their mathematical skills to get results to support their prediction. Moving forwards, students are shown how to rearrange the equation to make the mass the subject of the formula so they can use their skills when asked to calculate the speed. The final task of the lesson brings all of the learning together to tackle a set of questions of increasing difficulty. These questions have been differentiated so that students who need extra assistance can still access the learning. This lesson has been written for GCSE students

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Module P1 (Matter) of the OCR Gateway A GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Describe how the atomic model has changed over time Define density Measure length, volume and mass to calculate density Explain the differences in density between the different states of matter in terms of the arrangements of atoms and molecules Describe how physical changes differ from chemical changes Define the term specific heat capacity and distinguis between this term and specific latent heat Carry out calculations to apply the equations involving specific heat capacity and specific latent heat Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

An engaging lesson presentation (30 slides) that looks at electric current and ensures that students know the key details about this factor in preparation for their GCSE studies. The lesson begins by forming a definition for this electrical term and then as the lesson progresses, this definition is broken so that each element is understood. Students will be introduced to the difference between electron flow and conventional current. Time is taken to ensure that students understand that an ammeter must be set up in series. The remainder of the lesson will focus on the mathematical calculations which include current and important skills such as converting between units is covered.] As stated above, this lesson has been designed primarily for those students taking their GCSE exams (14 - 16 year olds in the UK) but is suitable for younger students too.

This is a fully-resourced lesson that is written for GCSE students and focuses on the calculations associated with the numerous equations that electrical power is found in. The lesson includes a fast-paced lesson presentation and a series of questions on a worksheet which has been differentiated two ways. Over the course of the lesson, the students will meet the different equations which include the factor of electrical power. Their whole range of mathematical skills will be tested, including rearranging the formula, conversion between units and simplifying two equations into one. The understanding of each of these skills and equations is checked through a range of tasks, each of which has a displayed mark scheme and explanation at the end so that students can self-assess their understanding. Students are encouraged to discuss and come up with insightful questions and answers.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P3 (Particle model of matter) of the AQA Trilogy GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Density of materials Changes of state Temperature changes in a system and specific heat capacity Changes of heat and specific latent heat Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

A fully-resourced lesson that looks at the 7 electromagnetic waves, their differences, similarities and uses. The lesson includes an engaging presentation (54 slides) and associated worksheets. The lesson begins with a number of engaging activities to get the students to find out the names of the 7 waves in the spectrum. Students will be challenged to use their knowledge of the properties of waves to explain why they have been arranged in this particular order. Moving forwards, some time is taken to ensure that students recognise the similarities of the waves. The rest of the lesson focuses on the uses of the waves and a homework is also set to get students to increase the number of uses that they know for each wave. There are regular progress checks throughout the lesson so that students can assess their understanding at critical points. This lesson has primarily been designed for GCSE students (14 - 16 year olds in the UK) but could be used with students at KS3 who are doing a project

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P3 (Conservation of energy) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Recall and use the equation to calculate the change in gravitational potential energy Recall and use the equation to calculate the change in kinetic energy of a moving object Explain what is meant by the conservation of energy Analyse the way energy is stored when a system changes Explain how mechanical processes become wasteful Explain ways of reducing unwanted energy transfer Recall and use the equation to calculate efficiency Describe the main energy sources available for use on Earth Explain patterns and trends in the use of energy resources Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that could be used over a series of lessons to help students to revise and assess their knowledge of the content that is found in topics P5 (Forces), P6 (Waves) and P7 (Magnetism and electromagnetism) of the AQA GCSE Combined Science specification and will be assessed in Paper 6 This revision lesson uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to cover the following sub-topics and specification points: Scalar and vector quantities Contact and non-contact forces Gravity Work done and energy transfer Forces and elasticity Speed Velocity Acceleration Newton’s laws of motion Momentum Conservation of momentum Transverse and longitudinal waves Properties of waves The EM waves Fleming’s left-hand rule This lesson contains a big emphasis on the mathematical calculations that will be involved in these exams, and as a result students are challenged to recall the equations and to apply them. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams. A lot of the tasks have been differentiated so that students of all abilities can access the work and be challenged appropriately.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P6 (Radioactivity) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Describe the structure of an atom, including the charge and mass of the subatomic particles Describe the structure of nuclei of isotopes Be able to explain why an atom is neutral Recall the radiation that can be emitted from an unstable nucleus Explain what is meant by background radiation and know the origins of this radiation Recall that an alpha particle is equivalent to a helium nucleus Compare alpha, beta and gamma radiations in terms of their abilities to penetrate and ionise Describe the processes of beta plus and beta minus decay Explain the effects on the atomic and mass number of radioactive decays Balance nuclear decay equations Recall that the unit of activity of a radioactive isotope is the Becquerel Use the concept of half life to carry out simple calculations Describe the differences between contamination and irradiation Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 1 (General Physics) of the CIE IGCSE Physics (0625) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE Define speed and calculate average speed from total distance divided by total time Plot and interpret a speed-time graph or a distance-time graph Recognise from the shape of a speed-time graph when a body is at rest, moving at a constant speed or changing speed Calculate the area under a speed-time graph to work out the distance travelled for motion with constant acceleration Show familiarity with the idea of the mass of a body State that weight is a gravitational force Distinguish between mass and weight Recall and use the equation W = mg Recall and use the equation density = mass divided by volume Understand friction as the force between two surfaces which impedes motion and results in heating Calculate moment using the product force × perpendicular distance from the pivot Identify changes in kinetic, gravitational potential, chemical, elastic (strain), nuclear and internal energy that have occurred as a result of an event or process Recognise that energy is transferred during events and processes, including examples of transfer by forces (mechanical working), by electrical currents (electrical working), by heating and by waves Apply the principle of conservation of energy to simple examples Describe how electricity or other useful forms of energy may be obtained from a range of sources Show a qualitative understanding of efficiency Demonstrate understanding that work done = energy transferred Relate (without calculation) power to work done and time taken, using appropriate examples SUPPLEMENT Distinguish between speed and velocity Define and calculate acceleration Understand deceleration as a negative acceleration Describe, and use the concept of, weight as the effect of a gravitational field on a mass State Hooke’s Law and recall and use the expression F = k x, where k is the spring constant Apply the principle of moments to different situations Understand that vectors have a magnitude and direction The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Are you the KING of the KINGDOMS” where they have to name the kingdoms involved based on a feature whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual IGCSE exam

This is a fully-resourced lesson that has been written for GCSE students and focuses on the meaning of the term, potential difference, and guides students through using this factor in calculations. A range of student-led tasks will challenge the students to recognise how a voltmeter needs to be set up to measure the potential difference and then gets them to use the readings to calculate other factors. Their mathematical skills will be tested throughout and students will be asked to analyse their answers and study a series circuit to learn the key rule about potential difference in these types of circuits. Progress checks have been written into the lesson at regular intervals so students are constantly assessing their understanding.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within topic 5 (Waves in matter) of the OCR Gateway A GCSE Physics specification. The sub-topics and specification points that are tested within the lesson include: Recall and apply the equation to calculate wave speed using frequency and wavelength Describe wave motion in terms of amplitude, frequency, wavelength and period Define wavelength and frequency and be able to describe and apply the relationship between these and the wave velocity Describe differences between transverse and longitudinal waves Describe reflection and transmission of waves at material interface Understand how waves are used in ultrasound and SONAR Be able to describe how a ripple tank can be used to measure the speed of a wave The electromagnetic spectrum Use ray diagrams to show refraction This revision lesson has been designed to include the wide variety of mathematical skills that are tested in the Physics exam papers including rearranging formula, converting to S.I. units and calculating using standard form. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

A detailed lesson presentation (37 slides) that looks at the different motions that are represented on a velocity-time graph and guides students through using these graphs to calculate the distance travelled by an object. The lesson begins by challenging the students to construct a velocity-time graph by using a displayed guide and using their knowledge of drawing a distance-time graph. Moving forwards, the students will match terms of motion to the lines on the graph and time is taken to make links to the physics equations that allow acceleration and deceleration to be calculated. Students will also learn that they can use a velocity-time graph to calculate the distance travelled. A worked example is used to show them how to tackle these questions. There are regular progress checks throughout the lesson so that students can assess their understanding of this topic. This lesson has been designed for GCSE students but could be used with higher ability KS3 students

This REVISION lesson contains an engaging powerpoint (45 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topics P12 (Magnetism and the motor effect) and P13 (Electromagnetic induction) of the Edexcel GCSE Combined Science specification. Generally, these topics are poorly understood by students but are regularly assessed through questions in the GCSE exams and so time has been taken to design the lesson so that the key points are covered and common misconceptions addressed. The following specification points are covered in this lesson: Recall that unlike magnetic poles attract and like magnetic poles repel Explain the difference between permanent and induced magnets Describe the use of plotting compasses to show the shape and direction of the field of a magnet and the Earth’s magnetic field Explain how the behaviour of a magnetic compass is related to evidence that the core of the Earth must be magnetic Explain that magnetic forces are due to interactions between magnetic fields Recall and use Fleming’s left-hand rule to represent the relative directions of the force, the current and the magnetic field for cases where they are mutually perpendicular Use the equation which connects force on a conductor, magnetic flux density, current and length Recall that a transformer can change the size of an alternating voltage Explain why, in the national grid, electrical energy is transferred at high voltages from power stations, and then transferred at lower voltages in each locality for domestic uses as it improves the efficiency by reducing heat loss in transmission lines Explain where and why step-up and step-down transformers are used in the transmission of electricity in the national grid Use the power equation (for transformers with 100% efficiency) This lesson is suitable for use throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This is a fully-resourced lesson which uses exam-style questions, engaging quiz competitions, quick tasks and discussion points to challenge students on their understanding of the content of topics P1 - P6, that will assessed on PAPER 5. It has been specifically designed for students on the Edexcel GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to cover as many specification points as possible but the following sub-topics have been given particular attention: Factors affecting thinking and braking distance The 7 recall and apply equations tested in PAPER 5 The units associated with the physical factors challenged in PAPER 5 Recognising the motions represented by different motions on velocity-time graphs Using a velocity-time graph to calculate acceleration Resultant forces Sound waves as longitudinal waves The electromagnetic waves Using significant figures and standard form The relative charges and masses of the particles in an atom Recognising isotopes Using the half-life of radioactive isotopes The development of the atomic model In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been incorporated into the lesson to walk through students through some of the more difficult concepts such as half-life calculations. Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3 teaching hours to complete the tasks and therefore this can be used at different points throughout the course as well as acting as a final revision before the PAPER 5 exam.