A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
This lesson has been written to act as a revision tool for students at the completion of topic P1 of the CIE IGCSE Combined Science specification or in the lead up to mock or terminal exams. This motion topic is extensive and the engaging PowerPoint and accompanying resources have been designed to include a wide range of activities that will allow the students to assess their understanding of the core and supplement sections and to recognise any areas which need further attention. This specification is fairly heavy in mathematical content and so a lot of opportunities are presented for a range of skills to be tested and the PowerPoint guides students through the application of these requirements such as rearranging the formula and converting between units.
The following specification points have received a particular focus in this lesson:
Calculate average speed using total distance and total time
Plot and interpret a speed-time graph
Recognise different motions on a speed time graph and relate this to the resultant force
Calculate acceleration and distance travelled from a speed-time graph
Distinguish between mass and weight
Recall and use the equation W = mg to calculate the weight
Recall and use the equation to calculate density
Interpret extension-load graphs and calculate the spring constant
Recognise the significance of the term, “limit of proportionality”
Recall and use the equation to calculate pressure
A number of quick quiz rounds, such as FILL THE VOID and THE BIG REVEAL, are used to maintain engagement and motivation and to challenge the students on their recall of important points.
It is estimated that it will take in excess of 2 hours of IGCSE teaching time to cover the detail included in this lesson
This lesson has been written to act as a revision tool for students at the completion of topic 2.1 of the WJEC GCSE Physics specification or in the lead up to mock or terminal exams. The engaging PowerPoint and accompanying resources have been designed to include a wide range of activities to allow the students to assess their understanding and to recognise any areas which need extra attention. This specification is heavy in mathematical content and so a lot of opportunities are presented for a range of skills to be tested and the PowerPoint guides students through the application of these requirements such as rearranging the formula and converting between units.
The following specification points have received a particular focus in this lesson:
Motion using speed, velocity and acceleration
Speed-time graphs
Application of the equations to calculate speed and acceleration
Using velocity-time graphs to calculate uniform acceleration and distance travelled
Knowledge of the terms reaction time, thinking distance, braking distance and stopping distance
The factors which affect these distances
A number of quick quiz rounds, such as THE WHOLE DISTANCE, are used to maintain engagement and motivation and to challenge the students on their recall of important points.
This lesson has been written to act as a revision tool for students at the completion of topic 2 of the Pearson Edexcel GCSE Physics specification or in the lead up to mock or terminal exams. This motion and forces topic is extensive and the engaging PowerPoint and accompanying resources have been designed to include a wide range of activities to allow the students to assess their understanding and to recognise any areas which need extra attention. This specification is heavy in mathematical content and so a lot of opportunities are presented for a range of skills to be tested and the PowerPoint guides students through the application of these requirements such as rearranging the formula and converting between units.
The following specification points have received a particular focus in this lesson:
Factors affecting thinking and braking distance
Calculating the distance travelled from the area under the velocity-time graph
Recalling and using the equations to calculate acceleration, force, speed, weight and momentum
Calculating uniform acceleration from a velocity-time graph
Resultant force and constant velocity
Forces and velocity as vector quantities
Circular motion
The difference between mass and weight
The law of the conservation of momentum
A number of quick quiz rounds, such as FILL THE VOID and WEIGHT A MINUTE, are used to maintain engagement and motivation and to challenge the students on their recall of important points.
It is estimated that it will take in excess of 2 hours of GCSE teaching time to cover the detail included in this lesson
This fully-resourced revision lesson has been written to cover the major details of the radioactivity topic that can be assessed in the GCSE Physics and Combined Science (HT) exams. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and to ultimately recognise those areas which need further consideration.
The following points are covered in this revision lesson:
Describe the structure of atom and recall the typical size
Recall the relative masses and charges of the subatomic particles and use the number of protons and electrons to explain why atoms are neutral
Describe the structure of the nuclei of an isotope
Explain what is meant by background radiation and recall sources
Describe methods for measuring and detecting radioactivity
Describe the process of beta minus and beta plus decay
Write and balance nuclear decay equations
Explain the effects on the proton and nucleon number as a result of decay
Recall that the unit of radioactivity is Bq
Use the concept of half-life to carry out calculations
Describe the use of isotopes in PET scanners
Describe the differences between nuclear fission and fusion
Explain how the fission of U-235 produces two daughter nuclei, two or three neutrons and releases energy
Write equations to represent nuclear fission
Describe the advantages and disadvantages of nuclear energy
Explain why nuclear fusion cannot happen at low temperatures and pressures
All of the lessons in this bundle are fully-resourced and have been designed to challenge the students on their knowledge of the topics which can be assessed in PAPER 1 of the Pearson Edexcel GCSE Physics specification.
All 7 topics that can be assessed in paper 1 are covered by these lessons:
Topic 1: Key concepts in Physics
Topic 2: Motion and forces
Topic 3: Conservation of energy
Topic 4: Waves
Topic 5: Light and the EM spectrum
Topic 6: Radioactivity
Topic 7: Astronomy
The PowerPoints and accompanying resources contain a wide range of activities which include exam-style questions with clear explanations of the answer, differentiated tasks and quiz competitions. There is also a big emphasis on the mathematical element of the specification and students are guided through the use of a range of skills which include the conversion of units and the rearrange of formulae to change the subject.
If you would like to see the quality of the lessons, download the topics 4 & 5 and 7 lessons which have been shared for free
This fully-resourced revision lesson has been written to cover the major details of the electricity and circuits topic that can be assessed in the GCSE Physics and Combined Science (HT) exams. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and to ultimately recognise those areas which need further consideration.
The following points are covered in this revision lesson:
The electrical symbols that represent the electrical components
Describe the differences between series and parallel circuits
Recall that a voltmeter is connected in parallel
One volt is equal to one joule per coulomb
Recall and use the equations that calculate energy transferred, charge, potential difference, power and electrical power
Recall that an ammeter is connected in series
Calculate the currents, potential differences and resistances in series and parallel circuits
Explain how current varies with potential difference in resistors
Know the functions of the wires in a plug and the safety features
The main task of the lesson, which challenges the students to calculate the currents, potential differences and resistances in series and parallel circuits, is differentiated to allow students of differing abilities to access the work
This revision lesson contains a wide range of activities that will challenge the students on their knowledge and understanding of the content detailed in topic 3 (Conservation of energy) of the Pearson Edexcel GCSE Physics specification. These activities include exam style questions which will allow the students to assess their progress against the clearly explained answer. There is also a quiz that runs throughout the course of the lesson and this has been designed to maintain engagement and motivation.
The following specification points have been covered in this lesson:
Recall and use the equation to calculate the gravitational potential energy
Recall and use the equation to calculate the kinetic energy
Explain what is meant by the conservation of energy
Explain that mechanical transfers become wasteful when energy is dissipated to the surroundings
Explain ways of reducing unwanted energy transfers
Recall and use the equation to calculate efficiency
Describe the main energy sources available for use on Earth and explain their patterns and trends in the use of energy resources
This bundle of revision lessons have been designed to enable students to assess their knowledge and understanding of the content detailed in the Pearson Edexcel GCSE Physics specification and ultimately to recognise those areas which need extra attention before an end of topic test or mock or terminal exam.
Each lesson is fully-resourced and the engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with clearly explained answers and quick quiz competitions.
The following topics are covered by this bundle:
Topic 1: Key concepts in Physics
Topic 2: Motion and forces
Topic 3: Conservation of energy
Topic 4: Waves
Topic 5: Light and the EM spectrum
Topic 6: Radioactivity
Topic 7: Astronomy
Topic 8: Energy - forces doing work
Topic 9: Forces and their effects
Topic 10: Electricity and circuits
Topic 12: Magnetism and the motor effect
Topic 13: Electromagnetic induction
Topic 14: Particle model
Topic 15: Forces and matter
If you want to see the quality of these lessons, download the topics 4 & 5, 7, 10 and 12 & 13 lessons as these have been shared for free.
This is a highly engaging, detailed and fully-resourced revision lesson which has been designed to test the students on their knowledge and understanding of topic 6 (Radioactivity) of the Pearson Edexcel GCSE Physics specification. The PowerPoint and accompanying resources contain a wide range of resources which include exam-style questions with fully-explained answers, differentiated tasks and quick quiz competitions. The students will be motivated by the range of tasks whilst crucially recognising those areas of the specification which require some extra time before the exams
The following specification points are covered in this lesson:
Describe the structure of atom and recall the typical size
Recall the relative masses and charges of the subatomic particles and use the number of protons and electrons to explain why atoms are neutral
Describe the structure of the nuclei of an isotope
Explain what is meant by background radiation and recall sources
Describe methods for measuring and detecting radioactivity
Describe the process of beta minus and beta plus decay
Write and balance nuclear decay equations
Explain the effects on the proton and nucleon number as a result of decay
Recall that the unit of radioactivity is Bq
Use the concept of half-life to carry out calculations
Describe the use of isotopes in PET scanners
Describe the differences between nuclear fission and fusion
Explain how the fission of U-235 produces two daughter nuclei, two or three neutrons and releases energy
Describe the advantages and disadvantages of nuclear energy
Explain why nuclear fusion cannot happen at low temperatures and pressures
It is estimated that it will take in excess of 2 hours of GCSE teaching to cover the detail of this lesson and it can be used for effective revision at the end of the topic or in the lead up to mock or terminal exams.
This is a highly engaging, detailed and fully-resourced revision lesson which covers topics 4 & 5 of the Pearson Edexcel GCSE Physics specification. Due to the close links between the topics of waves and light and the electromagnetic spectrum, it was decided to design a single resource that challenged the students on their knowledge and understanding of the Physics detailed in these two topics.
The PowerPoint and acccompanying resource have been written to include a wide range of activities which include exam-style questions (with clearly explained answers), differentiated tasks and quick quiz competitions. These activities challenge the following specification points:
Define and use the terms frequency, wavelength, amplitude and period
Recall and use both of the equations to calculate wave speed
Describe how to measure the velocity of sound in air and ripples on water surfaces
Describe the effects of reflection and refraction
Explain how waves will be refracted at a boundary in terms of a change in direction and speed
Recall that sound waves can be ultrasound and infrasound
Explain uses of ultrasound
Explain, with the aid of diagrams, refraction, the critical angle and total internal reflection
Explain the difference between specular and diffuse reflection
Recall that the EM waves are transverse and travel at the speed of light in a vacuum
Describe the EM spectrum as continuous from radio waves to gamma rays
Describe the uses and harmful effects of the EM waves
To fall in line with the heavy mathematical content of the specification, there is a large emphasis on a range of mathematical skills in this lesson which includes rearranging formula, converting between units and using standard form.
Due to the detail of this lesson, it is estimated that it will take in excess of 2 hours of GCSE-allocated teaching time to cover the content and this allows this to be used at the end of the topic or in the lead up to mock or terminal examinations.
This is a fully-resourced revision lesson which covers the content detailed in topic 10 (electricity and circuits) of the Pearson Edexcel GCSE Physics specification. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and ultimately recognise those areas which need further consideration.
The following specification points have been given particular attention in this lesson:
The electrical symbols that represent the electrical components
Describe the differences between series and parallel circuits
Recall that a voltmeter is connected in parallel
One volt is equal to one joule per coulomb
Recall and use the equations that calculate energy transferred, charge, potential difference, power and electrical power
Recall that an ammeter is connected in series
Calculate the currents, potential differences and resistances in series and parallel circuits
Explain how current varies with potential difference in resistors
Know the functions of the wires in a plug and the safety features
This lesson has been designed to fall in line with the heavy mathematical content of the Physics specification with a number of calculation tasks and students are guided through the range of skills that they will have to employ
This revision lesson is fully-resourced and the engaging PowerPoint and accompanying resources have been designed to challenge students on their understanding of the content detailed in topics 2.7, 2.8 and 2.9 of the WJEC GCSE Physics specification. It was decided that the close links between the types of radiation, half-life and nuclear energy lent themselves to a combined revision resource.
The lesson was written to cover as much of the topics as possible but the following points have been given particular attention:
The nucleon and proton number and the numbers of neutrons and protons in an atomic nucleus
Recognising and representing isotopes
Calculating the half-life when given information about the radioactive count
The differing penetrating powers of the three types of radiation
Background radiation
Sources of background radiation and possible reasons for varying levels of radon gas
Nuclear decay equations for alpha and beta decay
Nuclear fission and nuclear fusion
Representing a nuclear fission reaction in an equation
The wide range of activities which include exam-style questions with fully-explained answers, differentiated tasks and quick quiz competitions will engage and motivate the students whilst they recognise the areas of these topics which will require their further attention
It is estimated that it will take in excess of 2 hours of GCSE teaching time to complete this lesson
All of the lessons in this bundle are fully-resourced and have been designed to challenge the students on their knowledge of the topics which can be assessed in PAPER 2 of the Pearson Edexcel GCSE Physics specification.
The content in the following topics is covered by these lessons:
Topic 1: Key concepts in Physics
Topic 8: Energy - forces doing work
Topic 9: Forces and their effects
Topic 10: Electricity and circuits
Topic 12: Magnetism and the motor effect
Topic 13: Electromagnetic induction
Topic 14: Particle model
Topic 15: Forces and matter
The PowerPoints and accompanying resources contain a wide range of activities which include exam-style questions with clear explanations of the answer, differentiated tasks and quiz competitions. There is also a big emphasis on the mathematical element of the specification and students are guided through the use of a range of skills which include the conversion of units and the rearrange of formulae to change the subject.
This fully-resourced revision lesson consists of an engaging PowerPoint and differentiated resources which together challenge the students on their knowledge of the Key concepts in Physics, which are detailed in topic 1 of the Pearson Edexcel GCSE Physics specification . The content in this topic is particularly important because it will be assessed in both paper 1 and paper 2 of the terminal exams.
The lesson has been filled with a wide range of activities which test the following specification points:
Recall and use the SI units for physical quantities
Recall and use multiples and sub-multiples of units
Be able to convert between different units
Use significant figures and standard form#
To fall in line with the heavy mathematical content of this specification, the main task of the lesson challenges the students to carry out a range of calculations where they have to convert between units and leave their answers in a specific form.
This revision lesson has been filled with activities that will challenge the students on their knowledge and understanding of the content detailed in topic 8 (Energy - forces doing work) of the Pearson Edexcel GCSE Physics specification. The wide range of activities in the engaging PowerPoint and accompanying resources will check on the knowledge of this topic and allow the students to recognise those areas which need further attention before the mock or terminal GCSE exams.
This resource has been designed to cover as much of topic 8 as possible but the following points have received particular attention:
Describe how to measure the work done by a force
Understand that work done is equal to energy transferred
Recall and use the equation to calculate work done
Calculate the changes in energy involved when a system is changed by work done by forces
Recall and use the equation to calculate gravitational potential energy
Recall and use the equation to calculate kinetic energy
Explain how energy is dissipated so that it is stored in less useful ways
Define power as the rate at which energy is transferred and that 1 watt is equal to one joule per second
Recall and use the equation to calculate power
Recall and use the equation to calculate efficiency
The mathematical content of this specification and this topic is heavy and in line with this lots of calculated-based tasks are included and all of the answers are explained in steps so students can assess their progress
The main task of the lesson which challenges students to use the principle of moments has been differentiated so that differing abilities can access the work
This revision lesson has been filled with activities that will challenge the students on their knowledge and understanding of the content detailed in topic 9 of the Pearson Edexcel GCSE Physics specification. The wide range of activities in the engaging PowerPoint and accompanying resources will check on the knowledge of the forces and their effects topic and allow the students to recognise those areas which need further attention before the mock or terminal GCSE exams.
This resource has been designed to cover as much of topic 9 as possible but the following points have received particular attention:
What happens when objects can interact at a distance without contact
What happens when objects can interact by contact
Explain the difference between vector and scalar quantities using examples
Draw free body diagrams
Recall and use the equation to calculate the moment of a force
Recall and use the principle of moments in situations where rotational forces are in equilibrium
Explain ways of reducing unwanted energy transfer through lubrication
The main task of the lesson which challenges students to use the principle of moments has been differentiated so that differing abilities can access the work
This revision lesson is fully-resourced and has been written to allow students to assess their understanding of the content detailed in topic 15 (Forces and matter) of the Pearson Edexcel GCSE Physics specification. The engaging and detailed PowerPoint uses a wide range of activities, which includes exam-style questions with clear explanations of the answers, to enable the students to identify those areas which require further attention before the mock or terminal examinations.
The lesson was designed to cover as much of the topic as possible but the following points have received particular attention:
The difference between elastic and inelastic distortion
Recall and use the equation for linear elastic distortion
Use the equation to calculate the work done in stretching
Describe the relationship between force and extension
Recall and use the equation for pressure
Describe how pressure in fluids increases with depth and density
Use the equation to calculate the magnitude of pressure in liquids
Explain that an object in a fluid is subjected to upthrust
Calculate the depth at which an object floats
Due to the heavy mathematical content of this specification and particularly this topic, a lot of the activities challenge the students on their ability to recall and apply the equations. Step-by-step guides and differentiated resources are used to allow students of differing abilities to access the work.
This fully-resourced revision lesson has been designed to motivate and engage the students whilst they assess their understanding of the content detailed in topics 12 & 13 (Magnetism and the motor effect and electromagnetic induction) of the Pearson Edexcel GCSE Physics specification. These two topics tend to be poorly understood so time has been taken to plan activities that challenge the key details of the specification and provide clear explanations so students can progress.
The PowerPoint and accompanying resources were written to cover as much of the content in both topics as possible, but the following points have received particular attention:
Attraction and repulsion between unlike and like poles respectively
Electromagnetic induction
The application of Fleming’s left-hand rule
Application of the equation involving magnetic flux density
Microphones and loudspeakers and the opposite conversions of a changing current to sound waves
The ability of transformers to change the size of alternating voltage
The advantage of power transmission in high voltage cables
The application of the transformer equations involving potential difference and turns and for transformers with 100% efficiency
Due to the heavy mathematical element of the specification, the required skills are tested throughout the lesson and guidance is given to allow differing abilities to access the work
This fully-resourced revision lesson challenges the students on their knowledge of the content which is detailed in topic 14 (Particle model) of the Pearson Edexcel GCSE Physics specification. The wide range of activities, which include exam-style questions with clear explanations, will allow them to assess their understanding of the content and to recognise those areas which require further attention.
The lesson has been designed to cover as much of the module as possible but the following specification points have been given particular attention:
Recall and use the equation to calculate density
Explain the differences in density between the different states of matter
Describe that mass is conserved during physical changes
Explain how heating a system will change the temperature or change a state
Define the terms specific heat capacity and specific latent heat and describe the differences between them
Use the equations involving specific heat capacity and specific latent heat
Explain the qualitative relationship between Kelvin temperature and pressure of a gas
Convert between the Kelvin and degrees Celsius scales
Explain the effect of changing the volume on the pressure of a fixed mass of gas at a constant temperature
Explain why doing work on a gas can increase the temperature
Most of the resources are differentiated to allow students of differing abilities to access the work and be challenged and the PowerPoint guides the students through the range of mathematical skills which are tested in this topic
This fully-resourced revision lesson has been designed to engage and motivate the students whilst they assess their understanding of the content in topic 7 (Astronomy) of the Pearson Edexcel GCSE Physics specification.
The lesson has been written to include as many of the specification points as possible but the following have been given particular attention:
Explain how the value of g differs between the Earth’s surface and the surface of other bodies in space
Recall the bodies that are found in our Solar system
Recall the names and order of the eight planets
Describe evidence supporting the Big Bang theory
Describe that there will be a change in the frequency and wavelength of a wave if the source of the wave is moving in relation to the observer
Describe why the red-shift of galaxies provides evidence for the expansion of the Universe
Describe the evolution of stars of similar mass to our Sun
Describe the evolution of stars with a larger mass than our Sun
This topic contains a number of principles or theories which can be poorly understood by students so extra time has been taken to guide them in the formation of descriptions and explanations.