This fully-resourced revision lesson consists of an engaging PowerPoint and differentiated resources which together challenge the students on their knowledge of the Key concepts in Physics, which are detailed in topic 1 of the Pearson Edexcel GCSE Physics specification . The content in this topic is particularly important because it will be assessed in both paper 1 and paper 2 of the terminal exams. The lesson has been filled with a wide range of activities which test the following specification points: Recall and use the SI units for physical quantities Recall and use multiples and sub-multiples of units Be able to convert between different units Use significant figures and standard form# To fall in line with the heavy mathematical content of this specification, the main task of the lesson challenges the students to carry out a range of calculations where they have to convert between units and leave their answers in a specific form.

This is a fully-resourced revision lesson which covers the content detailed in the CORE & SUPPLEMENT sections of topics P5 & P6 (Electrical quantities and electric circuits) of the CIE IGCSE Combined Science specification. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and to ultimately recognise those areas which need further consideration. The following specification points have been given particular attention in this lesson: The electrical symbols that represent the electrical components Describe the differences between series and parallel circuits Recall that a voltmeter is connected in parallel One volt is equal to one joule per coulomb Recall and use the equations that calculate charge, potential difference and power Recall that an ammeter is connected in series Calculate the currents, potential differences and resistances in series and parallel circuits Know the safety function of the fuse Understand that like charges repel and unlike charges attract This lesson has been designed to fall in line with the heavy mathematical content of the Physics specification with a number of calculation tasks and students are guided through the range of skills that they will have to employ

This detailed lesson explains how observable features at a microscopic level can be used to classify living organisms into one of the five kingdoms. The engaging PowerPoint and accompanying resources have been designed to cover point 4.2.2 © (i) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply an understanding of the features of the animalia, plantae, fungi, protoctista and prokaryotae kingdoms. This lesson begins with a knowledge recall as students have to recognise that prior to 1990, kingdom was the highest taxa in the classification hierarchy. Moving forwards, they will recall the names of the five kingdoms and immediately be challenged to split them so that the prokaryotae kingdom is left on its own. An opportunity is taken at this point to check on their prior knowledge of the structure of a bacterial cell from module 2.1.1. These prior knowledge checks are found throughout the lesson (along with current understanding checks) as students are also tested on their knowledge of the structure and function of cellulose. This is found in the section of the lesson where the main constituent of the wall can be used to distinguish between plantae, fungi and prokaryotae. Quick quiz competitions, such as YOU DO THE MATH and SAY WHAT YOU SEE are used to introduce key values and words in a fun and memorable way. The final part of the lesson looks at the protoctista kingdom and students will come to understand how these organisms tend to share a lot of animal or plant-like features. Both of the accompanying resources have been differentiated to allow students of differing abilities to access the work and this lesson has been written to tie in with the previously uploaded lesson on taxonomic hierarchy and the binomial naming system (4.2.2 a & b).

This revision lesson is fully-resourced and differentiated to allow students of differing abilities to assess their understanding of topic 2.4 (Further motion concepts) of the WJEC GCSE Physics specification. The engaging and detailed PowerPoint and accompanying resources contain exam-style questions, quick tasks, discussion points and a quiz competition which check on the following specification points: The qualitative relationship between mass and velocity in the calculation of momentum Application of the law of the conservation of momentum to perform calculations involving collisions Applying the kinetic energy equation to compare the size of this energy store before and after an interaction Newton’s second law in the form force = change in momentum over time Using equations to model the motion of an object The principle of moments To fall in line with the specification, there is a big emphasis on mathematical skills in this lesson and students are given guidance and assistance to ensure that they can access the work

This lesson describes the classification of species into the taxonomic hierarchy and cover point 18.2 (a) of the CIE A-level Biology specification. The engaging PowerPoint and accompanying resources have been designed to show students how the domain, kingdom, phylum, class, order, family, genus and species are used in modern-day classification. The lesson begins by with a knowledge recall as students have to use the provided information about a mule to explain why a horse and donkey are considered to be members of different species. Moving forwards, students will learn that species is the lowest taxon in the modern-day classification hierarchy. The first of a number of rounds of a competition is used to engage the students whilst they learn the names of the 7 other taxa and the horse and the donkey from the earlier example are used to complete the hierarchy. Students are told that a binomial naming system is used in Biology to provide a universal name for each species and the final task of the lesson challenges them to apply their knowledge by completing a hierarchy for a modern-day human, by spotting the correct name for an unfamiliar organism

This fully-resourced REVISION lesson has been written to challenge the students on their knowledge of the content of topic 5 Solids, liquids and gases) of the Pearson Edexcel International GCSE Physics specification. The engaging PowerPoint and accompanying resources will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Using the correct units Converting between the Kelvin and degrees Celsius scales Explain the qualitative relationship between pressure and Kelvin temperature Use the relationship between pressure and Kelvin temperature Know and use the equations for density and pressure Design an experiment to investigate density Know the meaning of the specific heat capacity Use the equation for change in thermal energy Quiz rounds such as “SAY WHAT YOU SEE” and “YOU DO THE MATH” are used to test the students on their knowledge of key terms as well as numerical facts

This fully-resourced revision lesson contains a wide range of activities that will challenge the students on their knowledge and understanding of the content detailed in the CORE and SUPPLEMENT sections of topic P2 (Work, energy and power) of the CIE IGCSE Combined Science specification. These activities include exam style questions which will allow the students to assess their progress against the clearly explained answers. There is also a quiz that runs throughout the course of the lesson and this has been designed to maintain engagement and motivation. The following specification points have been covered in this lesson: Recall and use the equation to calculate work done Demonstrate an understanding that work done = energy transferred Understand that an object may have energy due to its motion or position Recall and use the equations to calculate kinetic and gravitational potential energy Recognise the ways that energy is transferred during events and processes Apply the conservation of energy Recall and use the equation to calculate power Distinguish between renewable and non-renewable sources of energy Describe how electricity is obtained from the tides, hydroelectric power and nuclear fission One of the main tasks of the lesson, which challenges the students to apply the law of the conservation of energy, has been differentiated so that differing abilities can access the work

This lesson has been written to act as a revision tool for students at the completion of topic 2.1 of the WJEC GCSE Physics specification or in the lead up to mock or terminal exams. The engaging PowerPoint and accompanying resources have been designed to include a wide range of activities to allow the students to assess their understanding and to recognise any areas which need extra attention. This specification is heavy in mathematical content and so a lot of opportunities are presented for a range of skills to be tested and the PowerPoint guides students through the application of these requirements such as rearranging the formula and converting between units. The following specification points have received a particular focus in this lesson: Motion using speed, velocity and acceleration Speed-time graphs Application of the equations to calculate speed and acceleration Using velocity-time graphs to calculate uniform acceleration and distance travelled Knowledge of the terms reaction time, thinking distance, braking distance and stopping distance The factors which affect these distances A number of quick quiz rounds, such as THE WHOLE DISTANCE, are used to maintain engagement and motivation and to challenge the students on their recall of important points.

This lesson has been written to act as a revision tool for students at the completion of topic 2 of the Pearson Edexcel GCSE Physics specification or in the lead up to mock or terminal exams. This motion and forces topic is extensive and the engaging PowerPoint and accompanying resources have been designed to include a wide range of activities to allow the students to assess their understanding and to recognise any areas which need extra attention. This specification is heavy in mathematical content and so a lot of opportunities are presented for a range of skills to be tested and the PowerPoint guides students through the application of these requirements such as rearranging the formula and converting between units. The following specification points have received a particular focus in this lesson: Factors affecting thinking and braking distance Calculating the distance travelled from the area under the velocity-time graph Recalling and using the equations to calculate acceleration, force, speed, weight and momentum Calculating uniform acceleration from a velocity-time graph Resultant force and constant velocity Forces and velocity as vector quantities Circular motion The difference between mass and weight The law of the conservation of momentum A number of quick quiz rounds, such as FILL THE VOID and WEIGHT A MINUTE, are used to maintain engagement and motivation and to challenge the students on their recall of important points. It is estimated that it will take in excess of 2 hours of GCSE teaching time to cover the detail included in this lesson

This revision lesson has been designed to challenge the students on their use of a range of mathematical skills that could be assessed on the AQA GCSE Combined Science papers. The mathematical element of the AQA GCSE Combined Science course has increased significantly since the specification change and therefore success in those questions which involve the use of maths can prove to be the difference between one grade and another or possibly even more. The engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with displayed mark schemes and explanations so that students can assess their progress. Other activities include differentiated tasks, class discussion points and quick quiz competitions such as “YOU DO THE MATH” and “FILL THE VOID”. The following mathematical skills (in a scientific context) are covered in this lesson: The use of Avogadro’s constant Rearranging the formula of an equation Calculating the amount in moles using mass and relative formula mass Calculating the relative formula mass for formulae with brackets Using the Periodic Table to calculate the number of sub-atomic particles in atoms Changes to electrons in ions Balancing chemical symbol equations Converting between units Calculating concentration in grams per dm cubed and volumes of solutions Calculating size using the magnification equation Using the mean to estimate the population of a sessile species Calculating percentages to prove the importance of biodiversity Calculating percentage change Calculating the acceleration from a velocity-time graph Recalling and applying the Physics equations Understanding prefixes that determine size Leaving answers to significant figures and using standard form Helpful hints and step-by-step guides are used throughout the lesson to support the students and some of the worksheets are differentiated two ways to provide extra assistance. Due to the detail of this lesson, it is estimated that it will take in excess of 3 hours of GCSE teaching time to cover the tasks and for this reason it can be used over a number of lessons as well as during different times of the year for revision.

This revision lesson has been designed to challenge the students on their use of a range of mathematical skills that could be assessed on the six OCR Gateway A GCSE Combined Science papers. The mathematical element of the GCSE Combined Science course has increased significantly since the specification change and therefore success in those questions which involve the use of maths can prove to be the difference between one grade and another or possibly even more. The engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with displayed mark schemes and explanations so that students can assess their progress. Other activities include differentiated tasks, class discussion points and quick quiz competitions such as “It doesn’t HURT to CONVERT”, “YOU DO THE MATH” and “FILL THE VOID”. The following mathematical skills (in a scientific context) are covered in this lesson: The use of Avogadro’s constant Rearranging the formula of an equation Calculating the amount in moles using mass and relative formula mass Calculating the relative formula mass for formulae with brackets Using the Periodic Table to calculate the number of sub-atomic particles in atoms Changes to electrons in ions Balancing chemical symbol equations Empirical formula Converting between units Calculating concentration in grams per dm cubed and volumes of solutions Calculating size using the magnification equation Using the mean to estimate the population of a sessile species Calculating percentages to prove the importance of biodiversity Calculating percentage change The BMI equation Calculating the acceleration from a velocity-time graph Recalling and applying the Physics equations Understanding prefixes that determine size Leaving answers to significant figures and using standard form Helpful hints and step-by-step guides are used throughout the lesson to support the students and some of the worksheets are differentiated two ways to provide extra assistance. Due to the detail of this lesson, it is estimated that it will take in excess of 3 hours of GCSE teaching time to cover the tasks and for this reason it can be used over a number of lessons as well as during different times of the year for revision

The AQA specification states that a minimum of 10% of the marks across the 3 assessment papers will require the use of mathematical skills. This revision lesson has been designed to include a wide range of activities that challenge the students on these exact skills because success in the maths in biology questions can prove the difference between one grade and the next! Step-by-step guides are used to walk students through the application of a number of the formulae and then exam-style questions with clear mark schemes (which are included in the PowerPoint) will allow them to assess their progress. Other activities include differentiated tasks, group discussions and quick quiz competitions such as “FROM NUMBERS 2 LETTERS” and “YOU DO THE MATH”. The lesson has been written to cover as much of the mathematical requirements section of the specification as possible but the following have been given particular attention: Hardy-Weinberg equation Chi-squared test Calculating size Converting between quantitative units Standard deviation Estimating populations of sessile and motile species Percentages and percentage change Cardiac output Geometry Due to the detail and extensiveness of this lesson, it is estimated that it will take in excess of 2/3 hours of A-level teaching time to work through the activities and it can be used throughout the duration of the course

This fully-resourced lesson looks at the structure of genes and explores their role as a base sequence on DNA that codes for the amino acid sequence of a polypeptide. Both the PowerPoint and accompanying resource have been designed to cover point 6.2 (a) of the CIE International A-level Biology specification which states that students should understand how a gene codes for a polypeptide. The lesson begins with a prior knowledge check as the students have to recognise the key term chromosome from a description involving DNA and histones. This allows genes, as sections of a chromosome, to be introduced and the first of a number of quiz rounds is then used to get the students to meet the term locus so that they can understand how each gene has a specific location on a chromosome. Whenever possible, opportunities are taken to make links to the other parts of the CIE specification and this is utilised here as students are reminded that alternative versions of a gene (alleles) can be found at the locus. Moving forwards, students will learn that 3 DNA bases is a triplet and that each triplet codes for a specific amino acid. At this point, the genetic code is introduced and students are challenged to explain how the code contains 64 different triplets. By comparing this number against the number of different amino acids in proteins, students will see how each amino acid is encoded for by more than one triplet and how this explains the degenerate nature of the genetic code which forms a link to an upcoming lesson on gene mutations.

This detailed lesson explains how the process of transcription results in the production of mRNA, either directly from DNA in prokaryotes or following splicing in eukaryotes. Both the detailed PowerPoint and accompanying resource have been designed to specifically cover the second part of point 4.2 of the AQA A-level Biology specification but also provides important information that students can use when being introduced to gene expression in topic 8. The lesson begins by challenging the students to recall that most of the nuclear DNA in eukaryotes does not code for polypeptides. This allows the promoter region and terminator region to be introduced, along with the structural gene. Through the use of an engaging quiz competition, students will learn that the strand of DNA involved in transcription is known as the template strand and the other strand is the coding strand. Links to previous lessons on DNA and RNA structure are made throughout and students are continuously challenged on their prior knowledge as well as they current understanding of the lesson topic. Moving forwards, the actual process of transcription is covered in a 7 step bullet point description where the students are asked to complete each passage using the information previously provided. They will learn that the RNA strand formed at the end of transcription in eukaryotes is a primary transcript called pre-mRNA and then the details of splicing are explained. An exam-style question is used to check on their understanding before the final task of the lesson looks at the journey of mRNA to the ribosome for the next stage of translation. This lesson has been written to challenge all abilities whilst ensuring that the most important details are fully explained.

This fully-resourced lesson explains how gel electrophoresis is used to analyse nucleic acids and proteins and explores its applications in forensic science and medical diagnosis. The engaging and detailed PowerPoint and accompanying resource have been written to cover point 19.1 (d) of the CIE International A-level Biology specification As a whole lesson, each step of the genetic fingerprinting process is covered but with the main focus on gel electrophoresis within this process. Students will be introduced to STRs and will come to recognise their usefulness in human identification as a result of the variability between individuals. Moving forwards, the involvement of the PCR and restriction enzymes are discussed and students are challenged on their knowledge of this process and these substances as they were encountered in a previous lesson. The main section of the lesson focuses on the use of gel electrophoresis to separate DNA fragments (as well as proteins) and the key ideas of separation due to differences in base pair length or molecular mass are discussed and explained. As well as current understanding checks, an application question involving Huntington’s disease is used to challenge their ability to apply their knowledge of the process to an unfamiliar situation. The remainder of the lesson describes how the DNA is transferred to a membrane and hybridisation probes are used to create a pattern on the X-ray film. Time has been taken to make continuous links to the previous lessons in topic 19.1 as well as those from topic 6 where DNA, RNA and protein synthesis were introduced.

This fully-resourced lesson explains how genetic fingerprinting can be used to analyse DNA fragments and explores its applications in forensic science and medical diagnosis. The engaging and detailed PowerPoint and accompanying resource have been written to cover all of point 8.4.3 of the AQA A-level Biology specification Each step of the genetic fingerprinting process is covered and time is taken to ensure that key details are understood. Students will be introduced to VNTRs and will come to recognise their usefulness in human identification as a result of the variability between individuals. Moving forwards, the involvement of the PCR and restriction enzymes are discussed and students are challenged on their knowledge of this process and these substances as they were encountered in a previous sub-topic. The main section of the lesson focuses on the use of gel electrophoresis to separate DNA fragments (as well as proteins) and the key ideas of separation due to differences in base pair length or molecular mass are discussed and explained. As well as current understanding checks, an application question involving Huntington’s disease is used to challenge their ability to apply their knowledge of the process to an unfamiliar situation. The remainder of the lesson describes how the DNA is transferred to a membrane and hybridisation probes are used to create a pattern on the X-ray film. Time has been taken to make continuous links to the previous lessons in topic 8 as well as those from topic 4 where DNA, RNA and protein synthesis were introduced.

This lesson explains how the polymerase chain reaction (PCR) is used to clone and amplify DNA fragments as part of the recombinant DNA technology process. The PowerPoint has been designed to cover point 19.1 © of the CIE International A-level Biology specification and there is a particular emphasis on the use of Taq polymerase as opposed to human DNA polymerase A quick quiz competition is used to introduce the PCR abbreviation before students are encouraged to discuss the possible identity of the enzyme involved and to recall the action of this enzyme. Students will learn that this reaction involves cyclical heating and cooling to a range of temperatures so the next part of this lesson focuses on each temperature and specifically the reasons behind the choice. Time is taken to examine the key points in detail, such as why Taq polymerase has to be used as it is not denatured at the high temperature as well as the involvement of the primers. This process is closely linked to other techniques like electrophoresis which is covered in a later lesson and ties are continuously made throughout the lesson