This fully-resourced lesson has been designed to cover the higher tier content of specification points 7.13 & 7.14 (Control of blood glucose concentration) as found in topic 7 of the Edexcel GCSE Biology & Combined Science specifications. This resource contains an engaging PowerPoint and accompanying worksheets, some of which have been differentiated so that students of different abilities can access the work. The resource is filled with a wide range of activities, each of which has been designed to engage and motivate the students whilst ensuring that the key Biological content is covered in detail. The students will learn how blood glucose concentration is controlled by insulin and glucagon secretion and some time is taken to look at diabetes type I and II to make the link. Understanding checks are included throughout so that the students can assess their grasp of the content. In addition, previous knowledge checks make links to content from earlier topics such as the endocrine system and literacy checks ensure that the students can spell and recognise the key words, which is extremely important considering how many terms begin with the letter g in this homeostatic control system. As stated at the top, this lesson has been designed for GCSE-aged students who are studying the Edexcel GCSE Biology or Combined Science courses, but it can be used with A-level students who need to go back over the key points before looking at the homeostatic control in more detail

This concise lesson has been written to cover specification point 5.1.1 (d) of the OCR A-level Biology A specification which states that students should be able to apply an understanding of the behavioural responses in temperature control in ectotherms. The main aim when designing the lesson was to support students in making sensible and accurate decisions when challenged to explain why these types of organisms have chosen to carry out a particular response. A wide range of animals are used so students are engaged in the content matter and are prepared for the unfamiliar situations that they will encounter in the final exam. Time is also taken to compare ectotherms against endotherms so that students can recognise the advantages and disadvantages of ectothermy. This lesson has been written for A-level students studying on the OCR A-level Biology A course. Lessons on temperature control in endotherms and the principles of homeostasis and cell signalling, which are also in module 5.1.1, are also available so please download those too as they will allow students to make connections between one lesson, the previous and the next.

This fully-resourced lesson looks at the series of small steps that form the Krebs cycle and focuses on the reactions which involve decarboxylation and dehydrogenation and the reduction of NAD and FAD. The engaging PowerPoint and accompanying resource have both been designed to cover points 12.2 (d) and (e) of the CIE International A-level Biology specification. The lesson begins with a version of the Impossible game where students have to spot the connection between 8 of the 9 terms and will ultimately learn that this next stage is called the Krebs cycle. The main part of the lesson challenges the students to use descriptions of the main steps of the cycle to continue their diagram of the reactions. Students are continually exposed to key terminology such as decarboxylation and dehydrogenation and they will learn where carbon dioxide is lost and reduced NAD and FAD are generated. They will also recognise that ATP is synthesised by substrate level phosphorylation. The final task challenges them to apply their knowledge of the cycle to work out the numbers of the different products and to calculate the number of ATP that must be produced in the next stage This lesson has been designed to tie in with the other uploaded lessons on glycolysis, the Link reaction and oxidative phosphorylation.

This lesson describes the mechanisms of ventilation and gas exchange in insects. The PowerPoint and accompanying worksheets are the part of the second lesson in a series of 2 lessons which have been designed to cover the details that are set out in point 3.1.1 (f) of the OCR A-level Biology A specification. The first lesson in this series describes ventilation and gas exchange in bony fish In the previous lesson, the students were introduced to the different circulatory systems of mammals and bony fish and this knowledge is checked upon at the start of this lesson. This is relevant because the open circulatory system of an insect explains how oxygen is not transported in the blood but instead is absorbed from the body fluid that bathes the tissues. The next part of the lesson describes the structure of the spiracles, tracheae and tracheoles in the tracheal system and explains how this system is responsible for the delivery of oxygen to the open end of the tracheole for gas exchange with this fluid. As the tracheae are supported by chitin, which is similar in structure and function to cellulose and keratin respectively, a series of exam-style questions are used to challenge the students on their knowledge of those polymers from module 2.1.2 (biological molecules). As always, the mark scheme is embedded in the powerpoint so students can assess their understanding and progress. The final part of the lesson describes how squeezing of the tracheoles by the flight muscles and the changes in the volume of the thorax as a result of the movement of the wings are similar to mechanisms observed in mammals.

This is a fully-resourced revision lesson which covers the content detailed in topic 10 (electricity and circuits) of the Pearson Edexcel GCSE Physics specification. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and ultimately recognise those areas which need further consideration. The following specification points have been given particular attention in this lesson: The electrical symbols that represent the electrical components Describe the differences between series and parallel circuits Recall that a voltmeter is connected in parallel One volt is equal to one joule per coulomb Recall and use the equations that calculate energy transferred, charge, potential difference, power and electrical power Recall that an ammeter is connected in series Calculate the currents, potential differences and resistances in series and parallel circuits Explain how current varies with potential difference in resistors Know the functions of the wires in a plug and the safety features This lesson has been designed to fall in line with the heavy mathematical content of the Physics specification with a number of calculation tasks and students are guided through the range of skills that they will have to employ

This revision lesson has been designed to challenge the students on their use of a range of mathematical skills that could be assessed on the Edexcel GCSE Combined Science papers. The mathematical element of the Edexcel GCSE Combined Science course has increased significantly since the specification change and therefore success in those questions which involve the use of maths can prove to be the difference between one grade and another or possibly even more. The engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with displayed mark schemes and explanations so that students can assess their progress. Other activities include differentiated tasks, class discussion points and quick quiz competitions such as “It doesn’t HURT to CONVERT”, “YOU DO THE MATH” and “FILL THE VOID”. The following mathematical skills (in a scientific context) are covered in this lesson: The use of Avogadro’s constant Rearranging the formula of an equation Calculating the amount in moles using mass and relative formula mass Calculating the relative formula mass for formulae with brackets Calculating the relative atomic mass using the mass and abundance of isotopes Using the Periodic Table to calculate the number of sub-atomic particles in atoms Changes to electrons in ions Balancing chemical symbol equations Empirical formula Converting between units Calculating concentration in grams per dm cubed and volumes of solutions Calculating size using the magnification equation Using the mean to estimate the population of a sessile species Calculating percentages to prove the importance of biodiversity Calculating percentage change The BMI equation Calculating the acceleration from a velocity-time graph Recalling and applying the Physics equations Understanding prefixes that determine size Leaving answers to significant figures and using standard form Helpful hints and step-by-step guides are used throughout the lesson to support the students and some of the worksheets are differentiated two ways to provide extra assistance. Due to the detail of this lesson, it is estimated that it will take in excess of 3 hours of GCSE teaching time to cover the tasks and for this reason it can be used over a number of lessons as well as during different times of the year for revision.

This detailed lesson describes how gene expression can be changed by epigenetic modification, which is important in ensuring cell differentiation. The PowerPoint and accompanying resources describe DNA methylation, histone modification, and non-coding RNA as methods of modification and are part of the final lesson in a series of 3 lessons that cover the content in point 7.2 of the Edexcel A-level biology B specification (Factors affecting gene expression). HIV, atherosclerosis and cystic fibrosis are included in the lesson to demonstrate the application of this control of gene expression in real biological examples. Students are challenged throughout the lesson on their current understanding as well as their knowledge of previously covered topics which have links and the answers are embedded into the PowerPoint to allow them to assess their progress. The other lessons in this series are uploaded and are titled “transcription factors” and “RNA splicing”.

This revision resource contains an engaging PowerPoint (44 slides) and associated worksheets, all of which have been differentiated two ways to allow students of differing abilities to access the work. The range of activities cover the content of Topic C11 (Air and water) of the CIE IGCSE Combined Science specification, for examination in June and November 2020 and 2021. The aim was to cover as much of the content as possible but the following topics have received particular attention: The composition of clean air Changes in atmospheric carbon dioxide levels The formation of carbon dioxide Common air pollutants and their effects on health and structures The treatment of water to make it safe The chemical tests for water A number of quiz competitions are included in the lesson such as “POLLUTE the air…with the answer” where students compete to be the first to identify a common pollutant from the clues. These competitions act to engage them whilst the exam questions and quick tasks will enable them to assess their understanding of the content.

This lesson describes the nature of the genetic code as near universal, non-overlapping and degenerate and relates this to the triplet code. The engaging lesson PowerPoint has been designed to cover point 2.11 of the Edexcel International A-level Biology specification and clear links are made to protein synthesis and gene mutations which students will meet in the next lot of lessons. At the start of the lesson, the students are challenged to use their knowledge of the bases in DNA and RNA to complete a definition which describes the genetic code as being near universal, non-overlapping and degenerate. Time is taken to explain how three bases on DNA (a triplet) and three bases on mRNA (a codon) encode for a single amino acid or a stop codon and this is the triplet code. A quick quiz competition is used to generate the number 20 so that the students can learn that there are 20 proteinogenic amino acids in the genetic code. This leads into a challenge, where they have to use their prior knowledge of DNA to calculate the number of different DNA triplets (64) and the mismatch in number is then discussed and related back to the lesson topic. Moving forwards, base substitutions and base deletions are briefly introduced so that they can see how although one substitution can change the primary structure, another will change the codon but not the encoded amino acid. The lesson concludes with a brief look at the non-overlapping nature of the code so that the impact of a base deletion (or insertion) can be understood when covered in greater detail in the lesson covering point 2.14

This detailed and clear lesson describes and explains how the electron transport chain and the chemiosmotic theory are involved in the synthesis of ATP by oxidative phosphorylation. The PowerPoint has been designed to cover the sixth part of point 5.2 of the AQA A-level Biology A specification and also looks at the role of the enzyme, ATP synthase. The lesson begins with a discussion about the starting point of the reaction. In the previous stages, the starting molecule was the final product of the last stage but in this stage, it is the reduced coenzymes which release their hydrogen atoms. Moving forwards, the process of oxidative phosphorylation is covered in 7 steps and at each point, key facts are discussed and explored in detail to enable a deep understanding to be developed. Students will see how the proton gradient is created and that the flow of protons down the channel associated with ATP synthase results in a conformational change and the addition of phosphate groups to ADP. Understanding checks are included throughout the lesson to enable the students to assess their progress. This lesson has been written to tie in with the other uploaded lessons on glycolysis, the Link reaction and Krebs cycle and anaerobic respiration.

This engaging and fully-resourced lesson looks at the myogenic nature of cardiac muscle and explores the roles of the SAN, AVN and Purkyne tissue (bundle of His) in the initiation and control of heart action. The PowerPoint and accompanying resources have been designed to cover point 3.1.2 (g) of the OCR A-level Biology A specification. The lesson begins with the introduction of the SAN as the natural pacemaker and then time is given to study each step of the conduction of the impulse as it spreads away from the myogenic tissue in a wave of excitation. The lesson has been written to make clear links to the cardiac cycle and the structure of the heart and students are challenged on their knowledge of this system from topic 3.1.2. Moving forwards, students are encouraged to consider why a delay would occur at the AVN and then they will learn that the impulse is conducted along the Bundle of His to the apex so that the contraction of the ventricles can happen from the bottom upwards. The structure of the cardiac muscle cells is discussed and the final task of the lesson challenges the students to describe the conducting tissue, with an emphasis on the use of key terminology Due to the detailed nature of this lesson, it is estimated that it will take about 2 hours of A-level teaching time to cover the detail

This detailed lesson looks at the structural organisation of the mammalian nervous system into the CNS and the PNS as detailed in point 5.1.5 (g) of the OCR A-level Biology A specification. Students will see how the PNS is divided into the sensory and motor systems and then further divided into the somatic and autonomic nervous systems. Prior knowledge checks are included throughout the lesson to make links to earlier topics such as the structure of neurones and the function of the hypothalamus in thermoregulation and osmoregulation. This lesson has been designed to tie in with the uploaded lesson on the autonomic nervous system which is also covered in specification point 5.1.5 (g)

This detailed lesson has been written to cover the part of specification point 6.4.3 of the AQA A-level Biology specification which states that students should be able to describe how the structure of the nephron allows for the formation of glomerular filtrate. The aim of the design was to give the students the opportunity to discover the function of ultrafiltration and to be able to explain how the mechanisms found in the glomerulus and the Bowman’s capsule control the movement of small molecules out of the blood plasma. Key terminology is used throughout and students will learn how the combination of the capillary endothelium and the podocytes creates filtration slits that allow glucose, water, urea and ions through into the Bowman’s capsule but ensure that blood cells and plasma proteins remain in the bloodstream. A number of quiz competitions are used to introduce key terms and values in a fun and memorable way whilst understanding and prior knowledge checks allow the students to assess their understanding of the current topic and to challenge themselves to make links to earlier topics. The final task of the lesson challenges the students to apply their knowledge by recognising substances found in a urine sample that shouldn’t be present and to explain why this would cause a problem This lesson has been written for students studying on the AQA A-level course and ties in nicely with the other kidney lessons on the structure of the nephron, selective reabsorption and osmoregulation

This fully-resourced REVISION LESSON is detailed and engaging and covers the content of topic 18 (Biodiversity, classification and conservation) of the CIE International A-level Biology specification. This topic is often viewed as less interesting than other topics by the students but is well represented in the exams in terms of questions and so a lot of time has gone into the design to include a wide range of activities which will allow them to assess their knowledge whilst remaining motivated. All of the exam questions have full answers so students can identify any missed marks and most of the tasks are differentiated to allow students of differing abilities to access the work and remain challenged. The lesson was planned to cover as much of the specification as possible but the following sub-topics have received particular attention: The biological classification of a species Using Simpsons Index of diversity to calculate the biodiversity of the habitat The reasons to maintain biodiversity Methods of protecting endangered species The use of assisted reproduction in conservation Different methods of sampling The taxonomic hierarchy The characteristic features of the domains and kingdoms Links to the other topics of the specification are made throughout the lesson and there is also a mathematical focus to ensure that the students are comfortable when presented with the numerical challenges Due to the extensiveness of this resource, it is likely to take at least 2 lessons to cover all of the activities

This fully-resourced revision lesson has been designed to motivate and engage the students whilst they assess their understanding of the content detailed in topics 12 & 13 (Magnetism and the motor effect and electromagnetic induction) of the Pearson Edexcel GCSE Physics specification. These two topics tend to be poorly understood so time has been taken to plan activities that challenge the key details of the specification and provide clear explanations so students can progress. The PowerPoint and accompanying resources were written to cover as much of the content in both topics as possible, but the following points have received particular attention: Attraction and repulsion between unlike and like poles respectively Electromagnetic induction The application of Fleming’s left-hand rule Application of the equation involving magnetic flux density Microphones and loudspeakers and the opposite conversions of a changing current to sound waves The ability of transformers to change the size of alternating voltage The advantage of power transmission in high voltage cables The application of the transformer equations involving potential difference and turns and for transformers with 100% efficiency Due to the heavy mathematical element of the specification, the required skills are tested throughout the lesson and guidance is given to allow differing abilities to access the work

This detailed and fully-resourced lesson describes the relationship between the structure and function of the polysaccharides: glycogen, starch and cellulose. The engaging PowerPoint and accompanying resources have been designed to cover the third part of point 1.2 of the AQA A-level Biology specification and clear links are also made to the previous lessons in this topic where the monosaccharides and disaccharides were introduced. By the end of this lesson, students should understand how key structural features like the 1 - 4 and 1 - 6 glycosidic bonds and the hydrogen bonds dictate whether the polysaccharide chain is branched or unbranched and also whether it spirals or not. Following the description of the structure of glycogen, students are challenged to design an exam question in the form of a comparison table so that it can be completed as the lesson progresses once they learn more about starch and cellulose. This includes a split in the starch section of the table so that the differing structures and properties of amylose and amylopectin can be considered. In the final part of the lesson, time is taken to focus on the formation of cellulose microfibrils and macrofibrils to explain how plant cells have the additional strength needed to support the whole plant. Due to the detail included in this lesson, it is estimated that it will take in excess of 2 hours of allocated teaching time to complete

This fully-resourced lesson describes the roles of enzymes in catalysing both intracellular and extracellular reactions and the mechanism of enzyme action. The engaging PowerPoint and accompanying resources have been designed to cover points 2.1.4 (a, b & c) of the OCR A-level Biology A specification and includes descriptions of Fischer’s lock and key hypothesis and Koshland’s induced-fit model as well as a focus on catalase and the digestive enzymes as intracellular and extracellular enzymes respectively. The lesson has been specifically planned to tie in with module 2.1.2 where protein structure and globular proteins were covered. This prior knowledge is tested through a series of exam-style questions along with current understanding and mark schemes are included in the PowerPoint so that students can assess their answers. Students will learn that enzymes are large globular proteins which contain an active site that consists of a small number of amino acids. Emil Fischer’s lock and key hypothesis is introduced to enable students to recognise that their specificity is the result of an active site that is complementary in shape to a single type of substrate. Time is taken to discuss key details such as the control of the shape of the active site by the tertiary structure of the protein. The induced-fit model is described so students can understand how the enzyme-susbtrate complex is stabilised and then students are challenged to order the sequence of events in an enzyme-controlled reaction. The final part of the lesson focuses on intracellular and extracellular enzymes. The students are challenged on their recall of the roles of DNA helicase and polymerase in DNA replication before they are challenged on their ability to apply their knowledge and understanding to an unfamiliar situation with questions about catalase and its role in the decomposition of hydrogen peroxide. The lesson concludes with one further set of exam-style questions that challenge their knowledge of carbohydrates, lipids and proteins from module 2.1.3 as they have to recognise some extracellular digestive enzymes from descriptions of their substrates.

This lesson explains the law of conservation of mass and applies this law to a closed system and a non-enclosed system. The PowerPoint and accompanying resources have been designed to cover point 1.48 of the Edexcel GCSE Chemistry specification and also covers that point in the Chemistry section of the Combined Science course. The lesson begins by introducing the law of the conservation of mass. Students will learn that they can expect questions which challenge them to prove that mass is conserved through the use of the relative formula mass. Therefore, the next section of the lesson focuses on the skills associated with this calculation and looks at more different formulae such as those with brackets. Students are given an opportunity to check their skills before trying to prove mass is conserved in three chemical reactions. All questions have displayed mark schemes so that students can assess their understanding. The rest of the lesson looks at instances of when the mass of the reactants does not equal the mass of the products. A practical method for the decomposition of copper carbonate is provided if the teacher wants to use it, so that students can collect results which show this difference in mass. Discussions are encouraged in order to get students to offer explanations as to why the mass of the products is lower. Once the gas has been identified, students are further challenged to consider apparatus that could be used to collect and record the results to again prove conservation

This lesson covers the biological classification of a species, taxonomic hierarchy and the binomial system of naming species. The engaging PowerPoint and accompanying resources have been designed to cover points 4.2.2 (a) & (b) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply an understanding of these three topics. The lesson begins by looking at the meaning of the term population in Biology so that the term species can be introduced. A hinny, which is the hybrid offspring of a horse and a donkey, is used to explain how these two organisms must be members of different species because they are unable to produce fertile offspring. Moving forwards, students will learn that species is the lowest taxon in the modern-day classification hierarchy. The first of a number of rounds of a competition is used to engage the students whilst they learn the names of the 7 other taxa and the horse and the donkey from the earlier example are used to complete the hierarchy. Students will understand that the binomial naming system was introduced by Carl Linnaeus to provide a universal name for each species and they will be challenged to apply their knowledge by completing a hierarchy for a modern-day human, by spotting the correct name for an unfamiliar organism and finally by suggesting advantages of this system.

This fully-resourced lesson describes the differences between resolution and magnification, with reference to light and electron microscopy and the engaging PowerPoint and accompanying resources have been designed to cover the content of point 1.1 (d) of the CIE A-level Biology specification. To promote engagement and focus throughout these 3 lessons in topic 1.1 (The microscope in cell studies), the PowerPoint includes an ongoing quiz competition and a score sheet is found within the resources to keep track of the cumulative scores. The quiz rounds found in this lesson will introduce the objective lens powers, the names of the parts of a light microscope and emphasise some of the other key terms such as resolution. The final round checks on their understanding of the different numbers that were mentioned in the lesson, namely the differing maximum magnifications and resolutions. Time is taken to explain the meaning of both of these microscopic terms so that students will understand their importance when looking at the cell structures in topic 1.2. By the end of the lesson, the students will be able to explain how a light microscope uses light to form an image and will understand how electrons transmitted through a specimen or across the surface will form an image with a TEM or a SEM respectively. As detailed above, this lesson has been written to tie in with the previous lesson on measuring cells and units as well as the next lesson on calculating actual size.