![Hero image](https://www.tes.com/cdn/app-resource-store/5d51d34/img/hero.jpg)
520Uploads
200k+Views
107k+Downloads
Mathematics
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Is it worth converting to LPG? Fuel efficiency
Use mathematical calculations to decide whether it is worth switching to an alternative fuel
Can data be used to determine whether it is worth converting to LPG?
This activity will encourage students to use their problem-solving skills. Understanding what information is needed and how to use the information is a key part of problem solving.
Download our free fuel consumption worksheet below to take part in this engaging activity. This is a great way for GCSE students to learn about fuel efficiency and develop their problem-solving skills.
Students should to read the problem on the first slide of the presentation. Let them think about what criteria they can use to decide whether it’s worth converting to LPG. They should take into account the annual mileage, price of petrol or LPG at the local station and size of the car in question.
They should consider the amount of money saved by converting vs the cost of the conversion. Some students may want to examine the time it would take to recover the cost of converting the car. They also need to be aware that “a car uses 10% more LPG than petrol when driving the same distance.”
Discussion points
Encourage discussion about which type of car saves most and get them to think about why this is. Remember they all do the same annual mileage! If students don’t consider recovering the cost of conversion, then prompt them at some point.
Extending the problem
It is possible to use the spreadsheet to produce a graph showing how the savings vary with annual mileage. Students could investigate the fluctuations in LPG and petrol prices over time to see if this would influence their decision.
Potential GCSE content covered
In this activity learners will use and apply calculations, use compound measures, calculate the percentage of an amount and consider the application of algebra to spreadsheets.
What is LPG?
LPG is a by-product of crude oil extraction and the refining process. Many people who consider LPG as an alternative to petrol do so because they believe that the combustion of propane results in lower carbon dioxide emissions. In terms of fuel costs, LPG costs a little more than half the price of petrol or diesel, but fuel economy is about 20-25% lower. Therefore, the overall running costs of an LPG car is approximately a third less than a petrol only car – but only once you’ve recovered the cost of the conversion.
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Coding a geometric construction
Following coded instructions for bisecting an angle
In this activity students will learn how to code a geometric construction. They’ll do this by matching a set of instructions to the correct geometric construction.
Learners will be introduced to the concept of Computer Numeric Controlled (CNC) machines. They’ll also be taught about the role of coding in executing precise tasks, such as bisecting an angle.
This is one of a set of resources developed to aid the teaching of the secondary national curriculum, particularly KS3, supporting the teaching in maths or design & technology (D&T).
Activity: Following coded instructions for bisecting an angle
Students will use Robocompass, a web tool that lets leaners simulate geometric constructions on a computer screen. They will match each diagram with the correct instruction and arrange them so that they can create a storyboard of how to draw and bisect an angle.
Download our activity overview for a detailed lesson plan for teaching students about coding a geometric construction.
The engineering context
Computer Numeric Controlled (CNC) machines follow pre-programmed instructions to execute tasks with precision, much like the coded geometric constructions students will work on in this activity. For example, CNC machines are used by engineers in manufacturing industries for common tasks such as cutting, drilling, and shaping materials.
Suggested learning outcomes
Students will learn how to bisect an angle while also learning how coded instructions can be used to execute geometric constructions.
Download our activity sheet and related teaching resources for free!
The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales.
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
Download our classroom lesson plan and presentation below.
Please do share your highlights with us @IETeducation.
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Motorsport data analysis
Get ready to apply mathematical skills to interpret data, analyse graphs, and uncover the secrets behind the success of motor racing teams.
By the end of this activity, learners will gain a deeper appreciation for mathematics and its real-world applications while also developing your data analysis and graph interpretation abilities.
The printable worksheet contains a GCSE maths lesson plan for secondary school teachers or parents. The presentation includes the relevant graph for this activity and corresponding questions designed for students’ engagement. Allow the students some time to read the task and consider the questions. You can give the students a paper copy of the graph.
Students will need to interpret and read the graph to answer the questions. They must consider what the information displayed in the graph can tell them about the motor race.
For the final task, students must find 107% of 1hr 20min. One approach would be to convert the time to minutes before finding 107%.
Once students have worked out how long the car has left, they will need to use this information to calculate the distance remaining.
Discussion points
Encourage discussion about the answers to the bullet points. Compare the different assumptions they have made and their approaches, particularly with the final task.
Extending the problem
You could ask the students to make a commentary to accompany the graph or examine relevant GCSE questions. Consider using graphs that show more than one vehicle and introduce overtaking and other features.
Potential GCSE content
This activity will cover interpreting graphs and data, speed/distance/time and estimating.
Download the free activity sheet !
All activity sheets and supporting resources are free to download, and all the documents are fully editable so that you can tailor them to your students and your schools’ needs.
The activity sheet includes teacher notes, guidance, helpful web links, and links (where appropriate) to the national curriculum in the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Flood Defence Challenge
A set of printable resources and guidance notes giving teachers and technicians the basic ingredients to run their very own IET Faraday® Challenge Day.
The challenge
Students work in teams to design and make a prototype of a simple device, that will allow homeowners to remove water from their homes, during periods of flooding.
About IET Faraday® Challenge Days
IET Faraday® Challenge Days are designed for six teams of six students (36 students in total) aged 12-13 years (year 8, and equivalent) and is carried out over one school day.
A cross-curricular Science, Design and Technology, Engineering and Mathematics (STEM) activity day that encourages the development of students’ problem solving, team working and communication skills.
Students achieve a better understanding of what engineering is and the science, maths and technology elements within engineering, leading to increased engagement in science or technology lessons afterwards.
The challenge has been specifically designed to give students the opportunity to be creative in their solutions and to succeed, independent of their level of ability. This activity is therefore suitable for a range of different ability levels.
All online resources are free to download, and the student booklet and PowerPoint presentation are fully editable, so you can tailor them to your students’ and your schools’ needs.
You can stream and download the related films for free by clicking on the link in the related resources section.
Please share your classroom learning highlights with us @IETeducation
To view the additional supporting videos, please visit the IET Education website.
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Table Tennis Server Challenge
IET Faraday® DIY Challenge Day
This engineering challenge for kids aims to create a device that consistently serves table tennis balls to a player so that they can practice their skills at the table tennis table. By creating this brilliant machine, a player can practice table tennis on their own while the machine serves back to them.
Activity introduction
The Faraday Challenge ‘Table Tennis Server’ has been designed for six teams of six students (36 students in total) aged 12 – 13 years (year 8, and equivalent).
Each team will be asked to assign: a team leader; an accountant; an assessment coordinator; two scientists; two mathematicians; two design and technologists; manufacturers and designers. Each team member will need to be assigned more than one role and feed into different aspects of the day.
You can adapt this set of resources for larger numbers of students if, for example, you wish to run the event for the whole year group. If this is the case, you will need to increase the number of team booklets and practical resources appropriately.
We have provided a set of printable resources and guidelines notes giving teachers and technicians the basic ingredients to run their very own Faraday Challenge Day. This cross-curricular activity day brings science, design and technology, engineering and maths (STEM) together in an engaging way.
The set of downloadable materials includes:
Teachers pack
A list of the practical materials needed, presenters’ notes highlighting key areas and reinforcing key themes throughout the day, some handy hints on how to deliver the day . . . plus printable Faradays currency and student certificates.
Student booklet
Available as an editable MSWord document to allow the booklet to be adapted to meets the needs of your students and your school.
Introductory PowerPoint presentation
A step-by-step guide for your students throughout the day, with supporting notes for the delivery of the presentation, including links to the related film clips.
The engineering context
Table tennis is a growing sport in the UK. Practice, as with most things, is the key to improving at the sport. The only problem is that it is hard to practice on your own. Being able to return service is often what provides the edge in terms of winning and losing.
Within this challenge, students will work in teams to design and make a prototype device that will serve tennis balls consistently across a table tennis table. The server must fit securely on the edge of the table and serve at least four balls accurately and precisely in the same position, and allow the ball to be returned.
Download the activity sheets for free!
All online resources (including film clips!) are free to download, and the student booklet and PowerPoint presentation are fully editable, so you can tailor them to your students’ and your schools’ needs.
For additional related videos, please visit the IET Education website.
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Emergency Communications Challenge
IET Faraday® DIY Challenge Day
A set of printable resources and guidance notes giving teachers and technicians the basic ingredients to run their very own IET Faraday® DIY Challenge Day. This cross-curricular activity day brings science, design and technology, engineering and maths (STEM) together in an engaging way.
The context of the challenge
Ease of communication is part of our life, we pick up the phone, turn on the radio, TV or internet to get news and information. Wifi networks work by radio signals. Your phone, TV and radio signals are transmitted by masts we hardly notice. But when all of these are knocked out by natural events how do we communicate?
Students are the engineer rescue team based in the town of Alpha which has been relatively unaffected by the extreme weather. As the engineer rescue team in town Alpha, students will design and build a prototype device that will need to send coded messages to town Beta, and create a code to send a message from Alpha across the mountains for decoding in Beta. There is little time to lose, with a (simulated) helicopter arriving in a matter of hours to transport half of the rescue team to town Beta to set up the system for testing.
Designed for six teams of six students (36 students in total) aged 12 – 13 years (year 8, and equivalent), the challenge encourages the development of students’ problem solving, team working and communication skills. This activity day can be tailored to the needs of your school and your students by adapting the PowerPoint presentation and the editable student booklet.
What’s included?
The complete set of downloadable materials includes:
Teachers pack
A list of the practical materials needed, presenters’ notes highlighting key areas and reinforcing key themes throughout the day, some handy hints on how to deliver the day… plus printable Faradays currency and student certificates.
Student booklet
Available as an editable MSWord document to allow the booklet to be adapted to meets the needs of your students and your school.
Introductory PowerPoint presentation
A step-by-step guide for your students throughout the day, with supporting notes for the delivery of the presentation, including links to the related film clips.
**Remember, it’s all free! **
All online resources (including film clips!) are free to download, and the student booklet and PowerPoint presentation are fully editable, so you can tailor them to your students’ and your schools’ needs.
If you are running one of our IET Faraday® DIY Challenge Day please do share your experience with us via our feedback form and case study template here. If you are unfamiliar with how to run a IET Faraday® DIY Challenge Day have a look at our 6 start-up videos here where we take you through the days, how they should run and what they entail.
And please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Remote Operations Challenge
A set of printable resources and guidance notes giving teachers and technicians the basic ingredients to run their very own IET Faraday® DIY Challenge Day. This cross-curricular activity day brings science, design and technology, engineering and maths (STEM) together in an engaging way.
The context of the challenge
Engineering has always been of great importance to the health industry. Machines, equipment, techniques and procedures are developing at a great pace and rely on engineering research and development.
The field of bioengineering – the application of engineering principles to address challenges in the fields of biology and medicine, is advancing rapidly. As medical knowledge, techniques and expertise get more sophisticated, the needs to perform remote operations, to levels of minute accuracy, are becoming more and more necessary and common.
The Remote Operations challenge is based on the IET Faraday® Challenge Day of the same name from our 2010/11 IET Faraday® Challenge Day season.
Students work in teams to design and make a prototype device that can simulate a heart and kidney transplant, but must be operated remotely. Objects representing the human heart (tennis ball) and a kidney (ping-pong ball) must be picked up and accurately placed in their appropriate holes in an MDF/cardboard cutout of a human torso.
Designed for six teams of six students (36 students in total) aged 12 – 13 years (year 8, and equivalent), the challenge encourages the development of students’ problem solving, team working and communication skills. This activity day can be tailored to the needs of your school and your students by adapting the PowerPoint presentation and the editable student booklet.
**What’s included? **
The complete set of downloadable materials includes:
Teachers pack
A list of the practical materials needed, presenters’ notes highlighting key areas and reinforcing key themes throughout the day, some handy hints on how to deliver the day … plus printable Faradays currency and student certificates.
Student booklet
Available as an editable MSWord document to allow the booklet to be adapted to meets the needs of your students and your school.
Introductory PowerPoint presentation
A step-by-step guide for your students throughout the day, with supporting notes for the delivery of the presentation, including links to the related film clips. Film clips
Informative clips about remote medicine and robotic surgery, plus examples of possible solutions to the challenge.
To view the additional related videos, please visit the IET Education website.
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Mission to Mars - DIY challenge day
A set of printable resources and guidance notes giving teachers and technicians the basic ingredients to run their very own IET Faraday® DIY Challenge Day. This cross-curricular activity day brings science, design and technology, engineering and maths (STEM) together in an engaging way.
The context of the challenge
Humans have been exploring the Earth for many years, travelling abroad for holidays, organising explorations to the top of mountains, to the poles of the Earth and to the bottom of oceans.
What happens when this spirit of expedition is turned to the skies?
Activity info and teachers’ notes
The Mission to Mars challenge is based on the IET Faraday® Challenge Day of the same name from our 2013/14 IET Faraday® Challenge Day season.
Students are the engineer specialists recruited by ‘Make it 2 Mars’ to establish a human settlement on the planet Mars by 2023. Students will design and construct a rocket which will transport supplies via Earth orbit to the astronauts on Mars, as well as building a system to transport their rocket to the launch site for testing.
Designed for six teams of six students (36 students in total) aged 12 – 13 years (year 8, and equivalent), the challenge encourages the development of students’ problem solving, team working and communication skills. This activity day can be tailored to the needs of your school and your students by adapting the PowerPoint presentation and the editable student booklet.
What’s included?
The complete set of downloadable materials includes:
Teachers pack
A list of the practical materials needed, presenters’ notes highlighting key areas and reinforcing key themes throughout the day, some handy hints on how to deliver the day . . . plus printable Faradays currency and student certificates.
Student booklet
Available as an editable MSWord document to allow the booklet to be adapted to meets the needs of your students and your school.
Introductory PowerPoint presentation
A step-by-step guide for your students throughout the day, with supporting notes for the delivery of the presentation, including links to the related film clips.
Download the free activity sheet below!
All online resources are free to download, and the student booklet and PowerPoint presentation are fully editable, so you can tailor them to your students’ and your schools’ needs.
If you are running one of our IET Faraday® DIY Challenge Day please do share your experience with us via our feedback form and case study template here. If you are unfamiliar with how to run a IET Faraday® DIY Challenge Day have a look at our 6 start-up videos here where we take you through the days, how they should run and what they entail.
And please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Reading maps and scale drawings
Work out how to reach destinations using a scale map
In our daily life we take 21st-century technology for granted. Some could argue that we aren’t developing basic skills, as technology often does the work for us. When the technology fails, however, the absence of some necessary skills could create difficult situations.
Can your students use our worksheet and presentation to work out how to reach a destination from a scale map?
This activity is an engaging investigation into the uses of communications technology in the modern world.
There is an opportunity to audit the students’ skills such as visualisation or map-reading to form a scale drawing. These are skills that may not have been developed due to the use of various electronic devices.
As a visualisation activity, distribute the Lost Now presentation as a handout or display it using a data projector. This is an activity where the process of thinking about what the map might show is more important than the actual outcome of the sketch they would produce. The handout has text handouts that can be printed and given to the students. There is also a map using Ordnance Survey symbols that might be better displayed on a screen using a data projector.
Students should complete the three activities outlined in the presentation either in groups or as individuals.
Tools/resources required
Ruler (a transparent ruler showing millimetres is best)
Calculators
Students will need Ordnance Survey symbols from the website below (either print sheets of the symbols or display them on a screen to save on copying).
The engineering context
Living in a highly technological world, where access to information and entertainment is at our fingertips, the Inform and Entertain Me topic is a gateway to engage and introduce students to the principles and technology that form the basis for communication devices that are used in our everyday lives.
Suggested learning outcomes
By the end of this activity students will be able to make informed decisions about technology for social, economic and environmental reasons, they will be able to use scale drawing and they will have an understanding of how waves are used to carry a communications signal.
Download the free Reading maps and scale drawings activity sheet!
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
How does a Sat Nav system work?
Learn about the technology behind satellite navigation systems and discuss the pros and cons of using them
Can your students consider how a GPS system functions and discuss the advantages and disadvantages of using them?
This activity is suitable for KS3 and KS4 and encourages students to undertake research and produce a visual display.
This activity is an engaging investigation into the uses of communication technology in the modern world.
This activity is an individual activity and could be run in an ICT suite to allow students to use the internet for research.
Distribute the Sat Nav handout to students. This handout gives some outline information about satellites and an un-annotated diagram. Students can cut out or copy the un-annotated diagram and add information to this to produce a visual display of how a Sat Nav system works.
There are a series of questions on the Sat Nav handout. Questions 1-4 are designed to get students to undertake research on the topic of satellites and their functionalities and capabilities.
This is a simple activity that will take approximately 30 minutes to complete.
How does a Sat Nav system work?
What we often refer to as ‘Sat Nav’ is properly called the Global Positioning System (GPS). This uses satellites that continually transmit a signal. They are like an accurate orbiting clock. The signal from at least three and up to seven satellites is received and compared by the Sat Nav device. Using some complicated maths, the Sat Nav device can work out not only where it is on the Earth’s surface, but at what altitude it is as well. The position information is compared with a map downloaded and stored by the Sat Nav device. The satellites tell you where you are, and the mapping hardware fills in the pictures of the road around you.
The satellites need to have a clear path through the air to the Sat Nav device – this is normally called a clear line of ‘sight’.
The engineering context
Living in a highly technological world, where access to information and entertainment is at our fingertips, the Inform and Entertain Me topic is a gateway to engage and introduce students to the principles and technology that form the basis for communication devices that are used in our everyday lives.
Download the free How does a Sat Nav system work? activity sheet!
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Balancing forces to design a boat
Balancing forces to design a boat
Using knowledge of forces in an engineering design context
The balancing forces to build a boat activity tasks participants to apply scientific and mathematical understanding of forces (resistance, buoyancy and thrust) and Newton’s 3 laws of motion, in an engineering and design context.
Relate speed to the streamlining in boat design and the shape of a boat’s hull. Consider the balanced and unbalanced forces the boat needs to withstand for maximum efficiency. This activity will demonstrate the principles of hydrodynamics, a similar set of principles to aerodynamics but involving water.
This activity is designed to be taught through science and design and technology simultaneously, as a cross-curricular project. However, it can also be tackled independently from each subject.
All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs.
Tools/resources required
Projector/whiteboard
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.
Please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
How do animals use sound
How sounds travel as waves of different frequencies and wavelengths
From founding communications, such as the fire beacon, to being able to communicate with space, there is no denying that developments in communication have advanced at a rapid speed. This topic presents students with communications of the past, present and future, helping them to understand the principles that form the basis for these developments.
This engaging STEM activity is aimed at KS3 students and deals with how animals use sounds and how sounds change in natural phenomena. This is so a student can understand how sound waves travel.
The teacher will first distribute a copy of the ‘Animal Sounds’ handout, which can be downloaded below, to each student.
Make sure students understand sound is a longitudinal wave of compressions and rarefactions of the material. Soundwaves follow the laws of wave behaviour, so they are a useful introduction to wave properties.
This activity can be simplified (particularly for less able students) by creating a discussion on why different animals have different hearing ranges and their experience of phenomena such as the Doppler effect.
Use the handout to discuss different sounds and what they might have learned in other lessons (e.g. music) about pitch, frequency, amplitude etc.
As an extension students could produce a display from low to high frequency, showing where the sound ranges used by different animals lie. Students could consider how sounds outside the normal spectrum could be used to develop new products. For example, to make ‘silent’ devices to broadcast sound or data between two points.
This is a quick and simple activity that will take approximately 15 minutes.
The engineering context
Sounds are vibrations travelling through materials. Many animals make sounds, either for communication or for location. Sound travels at different speeds in different materials. Generally, the denser the material, the faster the sound will travel.
Sound is a longitudinal wave of compressions and rarefactions of the material (a rarefaction involves particles in the material being more spread out than usual). Sound waves follow the laws of wave behaviour, so they are a useful introduction to wave properties.
Suggested learning outcomes
By the end of this free resource students will know that sound is produced by objects vibrating and they will understand that sound is a longitudinal wave. They will also know about the range of frequencies that can be heard by humans and other animals and they will understand that sound travels at different speeds in different mediums.
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Water treatment systems
Investigate the salinity of different water samples
Water is crucial to human life, but it can also be a killer.
Drinking or cooking water contaminated with micro-organisms or chemicals is a leading cause of disease and death across the world. Poor facilities for the disposal of sewage and other waste water can quickly lead to the spread of dangerous diseases.
Activity info, teachers’ notes and curriculum links
In this practical activity students investigate the salinity of three different water samples using a multimeter. Students first calibrate their salination probe and test the salinity of their solutions. Students can be asked to suggest how errors might have appeared in their results and what could be done to minimise or eliminate them.
This activity can be used as an extension to the ‘Filtering water’ activity.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Download the activity sheets for free!
All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
And please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Maths behind a heating system
This is a practical exercise in which students will utilise their mathematical knowledge to solve problems and apply formulas. Specifically, they will compute the length of pipes necessary for an underfloor heating system. They will also write a brief explanation of how a sustainable underfloor heating system operates.
This can be effectively taught within mathematics or within design and technology, as part of resistant materials or product design.
How long will this activity take?
This activity will take approximately 60-90 minutes to complete
Tools/resources required
Green School film
Projector/Whiteboard
Measuring equipment e.g. tape measures or trundle wheels
Squared paper
The engineering context
Sustainability is a key consideration in modern engineering practices. As the world faces pressing environmental challenges such as climate change and resource depletion, engineers must design solutions that not only meet the needs of society, but also minimise their impact on the planet.
Sustainable engineering involves developing systems, products and processes that are socially, economically, and environmentally responsible. This can include reducing carbon emissions, optimising energy use, minimising waste, conserving natural resources, and designing products that can be recycled or repurposed at the end of their lifecycle.
Suggested learning outcomes
By the end of this activity students will be able to describe the operation of a sustainable underfloor heating system and they will be able to create and apply mathematical formulae in a practical context.
Download the free Maths Behind a Heating System activity sheet!
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Tool holder testing
Students compete to make the strongest electromagnetic tool holder for a surgeons robotic arm.
A practical activity where students work in teams to build their own electromagnet and use this to make an ‘arm’ with an electromagnetic gripper at one end.
They are given some basic parts to start and a budget - a sum of ‘money’ or tokens with which to buy the other parts. Once their arm and gripper are complete they have 30 seconds to move as many paper clips from one pile to another as possible. The team moving the most paper clips in the allotted time is the winner.
This activity makes students consider the factors involved in electromagnet strength and design.
Download the activity sheets for free!
And please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Design a magnetic tool holder
**This activity gets students to use their knowledge of electromagnetism in order to design and build a magnetic tool holder for a surgical robot. **
Students learn how simple scientific principles can be used in sophisticated applications, how electric circuits can be switched on and off, and the factors that can affect the strength of an electromagnet.
Activity introduction
Each group is a dedicated design team with a compelling mission – to craft a comprehensive outline design for a tool holder tailored to seamlessly integrate with a surgical robot’s arm.
The task at hand:
• Each surgical tool boasts a magnetic fitting, necessitating the utilisation of an electromagnet within the tool holder to ensure a secure grip.
• A dynamic approach is required considering the diverse range of sizes and weights among these tools; This entails varying the electromagnet’s strength to account for this.
Guided by these challenges, teams will brainstorm, innovate, and collaborate to present their inventive solutions in a concise one-minute presentation to the rest of the class and assessed according to the success criteria on the design brief.
The engineering context
Telemedicine employs contemporary communication technology to provide medical diagnoses and patient care, even when the physician and patient are geographically separate.
Remote surgery entails utilising robotic systems within the operating room to aid surgeons during procedures. The surgeon observes the patient through a terminal and controls robotic surgical instruments using a specialised console.
Suggested learning outcomes
Upon completion of this activity, students will gain an understanding of the capabilities of surgical robots. They will grasp the transformation of basic scientific principles into intricate applications, comprehend the functioning of electric circuits’ activation and deactivation, and discern the variables impacting the strength of an electromagnet.
Download the free activity sheet!
All activity sheets and supporting resources are free to download, and all the documents are fully editable so that you can tailor them to your students and your schools’ needs.
The activity sheet includes teacher notes, guidance, helpful web links, and links (where appropriate) to the national curriculum in the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Market research on colour and mood
Designing a questionnaire that informs product design
Engineers play a key role in our everyday lives, often in ways we may not realise. Take the Watt Nightclub in Rotterdam as an example - engineers have designed a system that turns the energy created by dancing into power for the lighting. Even the colour of the lights was a consideration.
In this activity, students will explore the relationship between colour and mood, and how it might impact the amount of electricity generated on a dance floor.
This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within maths, science and design and technology (DT).
Activity:
The activity begins with a class discussion on whether colour can scientifically affect mood.
Students will then learn about the role of questionnaires in research, including what makes a good questionnaire and what factors need to be considered when designing one. The class will watch the Dance Power film, which directly relates to this technology, and then split into groups to create their own questionnaires. These will be tested, evaluated, and refined before being conducted as homework.
Students will process and present their findings, considering the reliability and accuracy of their evidence. They’ll discuss their results and the effectiveness of questionnaires as a research tool.
The engineering context
Market research is essential for engineers working in product design, providing valuable insights into consumer needs and preferences, enabling them to create innovative products that meet market demand and improve user satisfaction.
Furthermore, by exploring how engineers can use colour to influence mood and hence energy production, students will gain an insight into the creativity and problem-solving involved in engineering.
Suggested learning outcomes
Through this activity, students will gain an understanding of the scientific method, specifically the design and implementation of a market research questionnaire. The class will develop the ability to generate scientific evidence to prove a hypothesis, in this case, the relationship between colour and mood. They will also consider what constitutes sufficient evidence for scientists to confirm a hypothesis.
Download our activity sheets for free!
The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales.
All activity sheets and supporting resources are free to download (including the video), and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs.
Please do share your highlights with us @IETeducation.
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Create a tessellation pattern
In this engaging maths activity, students will embark on a journey of discovery and creativity as they explore the mesmerising art of tessellation.
This activity is designed for KS3 students and involves formulating a rule that can be used to create tessellation patterns. It will help students develop an understanding of the tessellation that will be required to design interlocking units.
This lesson plan could be taught in maths or as part of graphics within design and technology.
This activity promises an exciting blend of hands-on exploration, critical thinking, and geometry, fostering a deeper appreciation for the captivating world of tessellations.
What is tessellation?
Tessellation is a geometric concept in mathematics and art that involves covering a surface with repeated, non-overlapping shapes. These shapes, called tiles or polygons, fit together seamlessly, creating a pattern extending infinitely across a surface. Tessellations can be found in various forms in nature, art, and architecture.
The most famous example of a tessellating shape is the regular hexagon, which can fit together perfectly to cover a plane without leaving any gaps or overlaps. Other common tessellating shapes include squares, triangles, and other regular polygons.
The engineering context
The ‘Engineering Process’ scheme of work gives students an in-depth understanding of some engineering materials and how they are being developed in industry. This scheme was inspired by the casting process used to make the D3O smart material into a ‘usable’ form; this links to industrial practices such as quality control, standardisation, and casting manufacture. It is designed to challenge the students by requiring them to apply their knowledge and understanding of engineering materials through a ‘batch’ production experience.
Download the free activity sheet!
All activity sheets and supporting resources are free to download, and all the documents are fully editable so that you can tailor them to your students and your schools’ needs.
The activity sheet includes teacher notes, guidance, helpful web links, and links (where appropriate) to the national curriculum in the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Water supply
Organise water filtration components to create a safe water supply system
Activity info, teachers’ notes and curriculum links
This activity challenges students to work in small teams to design a water supply system for a small town of 5,000 inhabitants. They have to work within a budget, including giving themselves a profit margin. The activity offers strong opportunities for cross-curricular work with Enterprise.
The ‘Catalogue of Components’ handout includes a list of possible parts from which students can include in their design of their filtration system.
Water is crucial to human life, but it can also be a killer.
Drinking or cooking water contaminated with micro-organisms or chemicals is a leading cause of disease and death across the world. Poor facilities for the disposal of sewage and other waste water can quickly lead to the spread of dangerous diseases.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Download the activity sheets for free!
All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
And please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Measuring boat speed - KS3 engineering
Time the journeys of different shaped boats and present the results
This engaging engineering activity for KS3 considers displaying data from a practical investigation looking at the effect of streamlining a boats hull.
Students will be asked to consider how this information can be represented effectively and use this to form conclusions. The reliability of their results will then be discussed.
Activity Measuring boat speed
Students will use the test rig, which can be found in the resources below, to test several different shaped boats. Students should measure the time taken for each boat to travel a set distance and record the results.
Ask the students to discuss the fact that there is no measurable independent variable as it is very difficult to quantify the hull shape in terms of numbers.
The students should ponder how they are going to represent these results graphically.
If time is available, complete the investigation by repeating the tests. Discuss the sorts of errors that might occur in the collection of results.
Learners will then plot their results into a bar graph. This could be used as part of an advertising campaign to sell the boat which could include design, bar chart, a brief conclusion and an explanation as to why the results are reliable.
There is also an opportunity to use data logging equipment as well as light gates to further reduce errors in this engineering activity.
As an extension, students could calculate speed (s=d/t), and the mean speed for each boat, taking into account the anomalous results.
Students could consider what they could measure to draw a line graph and find the optimal hull design. If time is available, students could manufacture and test their own designs and include them within the analysis.
This activity will take approximately 45 minutes.
Tools/resources required
The construction is a fairly simple activity and can be undertaken by your KS3 students (as an after school activity or by a technician)
Boat objects
Stop Watch
Graph Paper
Suggested learning outcomes
By the end of this activity students will be able to explain when to use a bar chart and when they should be used to display categoric variables, they will be able to evaluate an experiment in terms of its reliability and precision and they will be able to apply scientific and mathematical understanding to an engineering context.
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation