This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a video on inheritance, students should watch the video and whilst watching this they will answer a set of questions about chromosomes and where these structures are found within a cell. Once this task is complete, students can self-assess their work using the mark scheme provided. Next, students are introduced to the idea of a gene. Students will be given the definition of a gene and will then need to complete a ‘Memory Test’ task which helps students to identify the locations of genes, chromosomes, the nucleus and cell membrane. Students will get a few minutes to study this image, they will then need to recreate it in their books. This task can then be self-assessed using the mark scheme provided. Next, students are shown another image, they will need to use what they have learned so far this lesson to identify the different structures. They can discuss their ideas in pairs before the answers are revealed using the PowerPoint. Students will then need to complete a ‘Who Am I?’ task, - matching the names of structures to the correct description. The mark scheme for this task is included in the PowerPoint so students can self-assess their work once it is complete. Students will now be shown a diagram to depict how fertilisation takes place, a sperm and egg cell meeting, nuclei fuse and genetic material joins together to form an embryo where each body cell (except sex cells) contains 46 chromosomes. Students could sketch a diagram of this in their books. Lastly, students will watch a video on the discovery of DNA by Watson & Crick. Whilst watching the video they will need to answer a set of questions, once this task has been completed students should self-assess their answers using the mark scheme provided. The plenary task is an ‘Anagram Challenge’ - students would need to unscramble a set of words to reveal 6 key words from this lesson. There is an ‘Extra Challenge’ task for students to come up with a definition for each of these key words, the answers to the anagrams are included. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to food chains, students will need to know the definition of the a producer and consumer. They are firstly asked to ‘Think > Pair > Share’ their ideas of a definition, before the answers are revealed. Next, students are introduced to the process of photosynthesis, a description of the process is included, as well as a list of the raw materials needed for photosynthesis to occur. Students will now watch a video on photosynthesis, during which students will need to answer a set of questions. This task can be self-assessed using the mark scheme provided. Next, pupils will complete a progress check on what they have learned so far this lesson. Students will need to complete a set of questions in their books, these are exam-style questions which can be marked and corrected using the mark scheme provided. Lastly, students will now watch another video on photosynthesis, with a set of questions that pupils need to answer about the theories surrounding photosynthesis over time. The very last activity require students to complete a sentences link-up task, to summarise what students have learned this lesson. This work can be self-assessed using the mark scheme provided. The plenary requires students requires students to either write a twitter message to summarise what they have learned or complete a set of five quiz questions. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to variation and what it means to belong to a species. Students will then be shown images of four different people and will be asked to note down the ways in which the people are different from one another and why. This will lead into the next PowerPoint slide which shows images of characteristics which are inherited - lobed/lobeless ears, eye colour, natural hair colour. Students can make a note of these in their books as examples. Next, students will be shown images of characteristics which could be due to the environment - weight, tattoos/scars, piercings, strength. Students will now focus on inherited variation, they will be asked to think about their own characteristics and then compare this to a family member - parents/grandparent. Students should then complete a mind map of the characteristics they have inherited from different people, e.g. I have inherited my eye colour from my Dad. If complete, there is an ‘extra challenge’ question for students to consider why they are not identical to either one of their parents. Next, students will be shown examples of environmental factors which lead to certain types of environmental variation. For example, where you grow up and the football team you support. Students will then need to complete a task which requires students to match the correct environmental factor with the correct type of environmental variation. This task can then be marked and assessed using the mark scheme provided once complete. The last task requires students to consider a world in which there is no variation, where everyone looked the same as one another. Students will then need to describe the advantages and disadvantages of this world and explain whether it would be a world they would like to live in. The plenary task requires students to spend a minute talking the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.1 Health & Lifestyle. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with some facts and figures about the rates of smoking around the world, how many cigarettes are smoked daily and the different chemicals found in cigarette smoke and which of these are linked with disease. Students will now watch a video on the chemicals found in cigarette smoke and the damage these chemicals can do to the body, whilst watching the video students will need to answer a couple of questions. The answers to these questions are then revealed using the PowerPoint, students can self-assess their work. Students will now watch another video on smoking and the effect on your health, students will be given a set of questions that they will need to answer using the video. Once this task is complete, students will self-assess their work using the mark scheme provided. The latter part of the lesson involves an activity whereby students will be given a worksheet of questions, there will be information posters placed around the room which students will need to use to answer questions on their worksheet. The mark scheme for this task is included in the PowerPoint presentation for students to peer-assess their work with their partners. Students will then need to complete a ‘feedback quadrant’ of their partners work, this includes a positive comment, something they missed out which should have included and a question to test their understanding of the lesson content. The very last task requires students to read a graph of information on the death rates due to different smoking-related illnesses. Students should answer the set of questions using the data, this task can then be self-assessed using the mark scheme provided. The plenary requires students to write three sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students are firstly given the definition of a joint and are then asked to move around a bit, either in their seats or around the room, and whilst moving they should think about their joints - whether they are all the same, if they move in the same way or not. This leads into an introduction to three types of joint that they need to learn about - ball-and-socket joint, hinge joint and fixed joint. The next part of the lesson will focus on the tissues which comprise a joint - namely tendons, ligaments and cartilage. Students will be given information sheets, either on their table or placed around the room. Using this information they will need to complete a summary table of the three tissues - the location of the tissue (what it is connected to), a description of the tissue and it’s role in the joint. Once students have completed this task they can self-assess their work using the mark scheme provided. Next, students will conduct an investigation into muscle strength. Students will work in pairs, following the method provided on the PowerPoint to measure the strength of their triceps, biceps and forearm using a Newton Scale. Their results should be recorded in a suitable table. Lastly, students are given a worksheet to summarise what they have learned on this topic so far. They will need to complete the sentences with the correct key word, this word can then be found within the word search. The mark scheme for this task is also included so students can mark and correct their work. The plenary provides two choices for students, either unscramble the anagrams of key words from the lesson or using the key word selection provided, write a summary of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.1 Health & Lifestyle. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction into the role of bacteria in digestion. This then follows into a video on digestion, students should watch the video and whilst watching they will answer a set of questions. Once this task has been completed students can self-assess their work using the mark scheme provided. Students will now be introduced to the idea of ‘enzymes’ - molecular scissors which break down larger molecules into smaller, soluble molecules which can then be absorbed by the small intestine. This idea is demonstrated with a diagram, students can take notes on this in their books - including a sketch of the enzymes at work. For the next activity, students will each be given a different bit of information on a specific type of enzyme - lipase, carbohydrase and protease. Students will then need to share information, as they walk around the classroom, in order to complete questions and a summary table on their own worksheet. Once this task has been completed, students will then use the mark scheme provided on the PowerPoint to peer-assess their work. The final activity is an exam-style question, to assess students knowledge of what they have learned so far this lesson. Students can mark their work using the mark scheme provided. The plenary task requires students to write a twitter message about what they have learned this lesson, including #keywords. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.1 Health & Lifestyle. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a question for students to ‘Think, Pair & Share’ with the class - ‘What do you think the most used drug in the world it?’ After a short class discussion, the answer will then be revealed as coffee! Students are now introduced to definition for drug, as well as explaining the difference between medicinal and recreational drugs. This then follows into a task whereby students should complete a mind map of reasons why people might want to take drugs. Their answers can be checked against the mark scheme which is provided on the PowerPoint. On the next slide students are provided with a more comprehensive explanation of the differences between medicinal and recreational drugs. The next task will then require students to sort a list of drugs into two columns - medicinal vs. recreational. This task can then be self-assessed using the mark scheme provided on the PowerPoint. Next, students are provided with some information about the differences between addiction and dependency. Students should answer a set of questions using this information, once complete this task can then be self-assessed using the mark scheme provided. Lastly, students will look into the use of performance-enhancing drugs in sport. Students will each be given a statement which is a viewpoint on the use of such drugs in sporting events. A class debate could the be organised for people to relay their viewpoints, whilst this is occurring students can write down arguments for and against drugs in sport within a summary table. The plenary task requires students to complete an exit card which included three things learned this lesson, five key words and one question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an activity whereby students are asked to sit quietly for a few minutes and think about what is happening to their bodies when they breathe in and out. Hopefully students recognise that their chest rises up as muscles contract and relax. This then leads to a video, students should watch the video and whilst watching they will need to complete a fill-in-the-blank task which summarises what is happening inside the lungs during inhalation and exahalation. The answers to this task are included in the PowerPoint so students can self-assess their work once it is complete. Next, students will be given a cartoon strip demonstrating the stages of both inhalation and exhalation, with some information missing. Higher ability students will be given a cartoon strip where they need to create captions for each diagram, lower/middle ability students will be required to fill in the blanks for each caption. The mark scheme for this task is included in the PowerPoint so students can self-assess their work once it is complete. Next, the bell jar model is introduced which demonstrates what happens to the lungs during inhalation and exhalation. The teacher can conduct a demonstration using the bell jar model, students will need to come up with an explanation for what is happening when the teacher either pulls down on the rubber sheet or pushed upwards on the rubber sheet. Students can check their responses to this task using the answers included in the PowerPoint presentation. The last slide shows students the practical apparatus that can be used to measure total lung volume in the lab, students can have a go at using this apparatus if there is time at the end of the lesson. The plenary is a word search activity, students will need to find a list of words which are related to the breathing and gas exchange lessons. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap of the key terms learned over the last few lessons on the topics of the skeleton and joints, students need to match the structure to the correct function. This work can then be self-assessed using the answers provided. Next, students will need to discuss the body muscle groups they already know of with their partner and then create a mind map of their ideas in their books. Students can then check their work against the answers revealed on the PowerPoint. The next activity requires students to correctly label the diagram of the human body with the muscle groups and then identify the function of each muscle group from a list provided. The mark scheme for this task is included for students to mark and correct their work. The next part of the lesson focuses on the antagonistic pairs of muscle. Students are shown a diagram of how biceps and triceps work together to either move the forearm upwards to downwards. After viewing the diagram and the explanation, students are asked to complete a fill-in-the-blank task to summarise this process. Their answers can be self-assessed using the PowerPoint presentation. Lastly, students will complete a progress check in their books - this is a set of questions based upon what they have learned this lesson. This task can be self or peer assessed using the mark scheme provided. The plenary task requires students to write three quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the definition for ‘gametes’, students will learn the role of the gametes in fertilisation and the specific structural features that sperm and egg cells possess which help them to carry out their function. Once students have learned about this, they will then complete on gametes structure to function. Once this task has been completed, students can self-assess their work using the mark scheme provided. Students are now introduced to the idea of fertilisation, a description of the process is provided, which students could take notes on in their book. This is followed by a task whereby students are given three terms - fertilisation, sperm cell and egg cell - using a bank of key words they will be required to write a definition for each. Next, students are shown a labelled diagram depicting sexual intercourse as well as an explanation of the process. The explanation should be read through as a class, answering any questions where necessary, before students are asked to complete a ‘progress check’ of questions on sexual intercourse. This work can then be self-assessed using the mark scheme provided. Lastly, students are shown a video of the journey a sperm cell has to make to reach an egg cell. Whilst watching the video, students will need to fill in the blanks on a cartoon strip depicting these events. Again, the mark scheme for this task is included in the PowerPoint for students to either self-assess or peer-assess their work. The plenary task is a 3-3-1 reduction, students need to write down 3 facts and 3 key words from the lesson today, as well as 1 question to test their peers knowledge of what was learned. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a ‘Think > Pair > Share’ task, students are asked to consider how to define ‘competition’. After a short discussion, the correct definition will then be revealed so students can take notes of this in their books. Next, students will be given a set of resources which animals/plants compete for, students will be asked to sort these resources into columns, either those that animals compete for, those that plants compete for or those that both animals and plants compete for. Once this task has been compelted, students can self-assess their work using the mark scheme provided. Next, students will watch a set of videos on competition between animals and plants, whilst watching the video they will need to complete a table for information to include - a resource - how organisms are competing for this resource - an explanation of how it is competing for the resource successfully. The work students have completed at the beginning of the lesson can then be summarised by a fill-in-the-blank activity, students should complete this in their books and it can then be marked and assessed using the answers provided. The second part of the lesson will focus on adaptations, students will firstly watch a video on adaptations, whilst watching the video they can answer a set of questions. The answers to these questions are included so students can assess their work once it is complete. Lastly, students will read through information stations around the room, which list adaptations of organisms which live in colder climates, warmer climates and dry climates. Students will need to complete a worksheet using these information sheets. The plenary activity requires students to come up with a set of three quiz questions to assess students knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a whole-class task for students to carry out, firstly they are asked to organise themselves according eye colour, then gender and then lastly height. After they have completed this task, students will be asked to ‘Think > Pair > Share’ their ideas about the way in which they organised themselves for these different categories. How did they differ from on another? This leads into an introduction to continuous and discontinuous variation. Firstly, students are introduced to the idea of discontinuous variation as being a type of variation which can be categorised into distinct groups - e.g. eye colour/gender. Secondly, students are introduced to the idea of continuous variation as being a characteristic which can take any value within a range, e.g. height. Students will now be organised into groups and each group will be assigned a characteristic - e.g. handedness, arm length etc. In their groups students will need to complete a survey of the class to collect data from at least 20 people. Once this is complete, students are asked to consider which of the characteristics they have surveyed are examples of continuous variation and which are discontinuous variation. The answers to this task will then be revealed using the answers provided on the PowerPoint presentation. The next part of the lesson focuses on how students should plot graph displaying either continuous or discontinuous variation - histogram and bar chart, respectively. Now students will need to go back to their groups, using the data collected on their characteristic they surveyed they will now need to produce their own graph. Lastly, students will need to complete a worksheet which will assess their knowledge of what they have learned this lesson. This work can the be self-assessed using the mark scheme provided once the task is complete. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction of the process of aerobic respiration including the word equations that pupils will need to learn. Next is a video, pupils will need to answer questions whilst watching the video, once it is finished they can self-assess their work using the mark scheme provided. Pupils will now have a recap of the different structures of an animal and plant cells, they will be required to label a diagram of an animal and plant cells. Once this task is complete, students can self-assess their work using the mark scheme provided. Students will look specifically at the ultra-structure of the cell and which parts are important for respiration, this activity is a match up activity that pupils can complete and then mark. Students will then be given a piece of information on how oxygen and glucose gets into cells, using this information students will need to answer a set of questions. This work can then be self-assessed using the mark scheme provided in the PowerPoint presentation. The plenary task requires students to spend a few minutes talking to each other about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with two images, both of ecosystems, students are then asked to discuss their ideas of what the definition of an ecosystem could be. The answer is then revealed so students can check their answers and correct if necessary. Students are now given a list of key words, whilst watching a video on ecology students should try to write a definition for each of these key words. This task can be self-assessed using the mark scheme provided once complete. Next, students are shown images of three different species of woodpecker - Green Woodpecker, Greater Spotted Woodpecker and the Lesser Spotted Woodpecker. Students can each be given a woodpecker name, they then need to come up with a survival strategy - how will they survive in the same habitat as each other? The ideas from the classroom can be noted down on the board for everyone to see. The PowerPoint can then reveal that each of the woodpeckers feeds in a different part of the woodland ecosystem. This leads into the definition of an ecological niche - as a particular place or role that an organism has within the ecosystem. The next activity requires students to watch a video on ecological niches of organisms living in a watering hole ecosystem, students will need to note down the niches they observe whilst watching the video. This task can then be marked and corrected using the answers provided on the PowerPoint once it is complete. The final activity requires students to complete a paragraph by filling in the blanks, in order to summarise what was learned this lesson. The mark scheme for this task is included so students can self-assess their work. The plenary activity requires students to complete one of the sentence starters included to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the menstrual cycle and the definition of a period. This leads into a video on the menstrual cycle, students will be given a worksheet of questions which they will need to answer whilst watching the video. This work can be self-assessed using the answers provided on the PowerPoint. Next, students need to understand what is happening on different days of the menstrual cycle. They will watch another video, using this they need to outline the events which occur on Day 1, Day 14, Days 7-28 of the menstrual cycle. Once complete, students can mark and correct their work using the mark scheme provided. The next part of the lesson focuses on contraception, firstly students will be given a card of information about contraception - condoms and the contraceptive pill. Students will need to read the information and answer a set of questions, this work can be assessed using the mark scheme provided once complete. The last task is an assessment task, to check students understanding of key terms learned over the last few lessons on reproduction. Students will need to match the correct term to the correct definition, this work can assessed using the answers provided. The plenary task requires students to write a Whatsapp message to their friend, explaining what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.1 Health & Lifestyle. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with images of people who are obese, underweight or have a vitamin deficiency (e.g. rickets). Students are asked to ‘Think > Pair > Share’ their ideas about whether these people are malnourished or not? Students should have a few minutes to discuss their ideas, before sharing the class. The PowerPoint then moves on to identify that each of the individuals are malnourished, as they are either taking on too much/too little nutrients. Students are now asked to consider how people might lose weight, students can create a mind map in their books. Once students have had a chance to discuss their ideas with the class, some ideas can be revealed so students can mark and correct their own work. This then follows into a ‘copy and complete’ task, where students should complete a set of sentences to summarise what they learned so far this lesson. This work can also be self-assessed using the mark scheme available. Students should now complete the mid-lesson progress check, which is a ‘true or false’ activity. Students are given a set of statements, they should indicate using mini whiteboards/write down their answers in their books, the answers can then be revealed for students to check their answers. Next, students are given a task which allows them to work out how much fat they are eating each week. Students can consider a list of statements, identify how many apply to them and add them up to give a rating out of 5, the higher the rating the more unhealthy their diet is. Lastly, students are asked to write a letter to a person who is overweight/obese to give them some information about the health problems which are associated with being overweight and explain some methods which they could employ to help them to lose weight. The plenary task is an anagram challenge, students are given a set of anagrams which are words associated with what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.1 Health & Lifestyle. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a question for students to consider - ‘How does alcohol affect your body?’ Students will watch a video which runs through some of the affects of alcohol on the body, whilst watching students should complete a mind map of their ideas. This task can then be self-assessed using the mark scheme provided. Students will now be provided with some information on alcohol and how this affects your body, particularly focusing on the brain and liver. Students will then complete a fill-in-the-blank task to summarise what they have learned so far, this task can then be self-assessed using the mark scheme provided. Next, the lesson will focus on the affect of pregnant women drinking whilst they are pregnant. Students will watch a video on this topic, whilst watching the video they should answer a set of questions. The answers to this task are provided on the PowerPoint, students can use this to self-assess their work once it is complete. Laslty, students are provided with some data on death rates due to alcohol-related diseases. Using this data students will be required to answer a set of questions, this work can then be marked and corrected using the mark scheme provided. The plenary task requires students to write a list of key words that students have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the gases that we breathe in and out of our bodies, via the respiratory system. Students will then be shown a diagram of the main components of the respiratory system, they will have 3 minutes to try to remember the locations of as many structures as possible. The image will then be taken away and they will be give a blank worksheet, without the labels, now they will need to correctly identify as many structures as they can remember. This work is then self-assessed using the mark scheme provided. The next activity requires students to watch a video, whilst watching they will need to answer a set of questions about the structure and function of the respiratory system. Once complete students can self-assess their work using the mark scheme provided. The next part of the lesson focuses on composition of gases in inhaled air vs. exhaled air. Students will be given a worksheet which provides some data on the percentage composition of gases in inhaled vs. exhaled air, students will need to answer questions using this information. The mark scheme for this task is included in the PowerPoint for students to assess their work once it is complete. The plenary task requires students to complete an exit card which will include 3 things learned this lesson, 5 key words and 1 question to test your peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the term ‘interdependence’ - students are given the defintion for this term. They are also asked to think of ways in which animals and plants depend on each other within an ecosystem, students can brain storm their ideas in their books. The answers will then be revealed using the PowerPoint presentation, students should check and correct their work. The next part of the lesson focuses on how changes in an ecosystem can affect animal populations, students will be asked four questions which they should discuss with their partner before writing their ideas down on a piece of A3 paper. The answers to these questions will then be revealed using the PowerPoint, so students can self-assess their work. Next, students will be shown a food web from a marine ecosystem and students will need to answer a set of questions using this food web. The questions focus on what will happen to certain animal populations if others increase/decrease/are wiped out. Students can answer these questions in their books, they can then self-assess their work using the answers provided. Students will now be given a set of information on stable communities. Students should read the piece of information and using this will need to answer a set of questions. The answers can be self-assessed using the mark scheme provided in the PowerPoint. Lastly, students will read an article (link included) on bioaccumulation in killer whales. Students should read the article and try to come up with a definition for the term ‘bioaccumulation’, once students have had a go at this task, the correct definition for this term will be revealed so students can self-assess their work. The plenary activity requires students to write three quiz questions based upon what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a diagram of a food chain, showing how energy is transferred from organism to organism and a definition for the term ‘food-chain’. This is then followed by a question, asking students to identify which of the organisms is a producer, a consumer, a herbivore and a carnivore. Students can discuss with their partner before feeding back to the class, the answers are then revealed and students can self-assess their work. Next, students are given a match-up activity whereby they need to correctly match the type of organism (producer, primary/secondary/tertiary consumer) with the correct description and example. This task can be self-assessed using the mark scheme included once it is complete. Students will now be given a selection of organisms - plant, aphid, hawk, vole, ferret, moth larva - using these organisms they will need to construct their own food chain, including labels and arrows. An example answer is provided for pupils to check their work, other examples could be made using the animal selection provided. Next, students will focus on energy losses through a food chain. Firstly, students will be told that energy can be lost from animal to animal along a food chain, students should then ‘Think > Pair > Share’ their ideas about why this happens. The answers can then be revealed using the PowerPoint presentation, students can check their answers and correct their work if necessary. Lastly, students are introduced to the idea of a food web - giving an example of a marine food web. Students are then asked a set of questions about this food web, students can answer these questions in their books before self-assessing them using the mark scheme available. The plenary task will then require students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)