This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. The lesson begins with a question for pupils to ‘Think > Pair > Share’ their ideas about what they already know about magnets. This can be discussed in a group, before feeding back to the classroom. Students will now complete a practical investigation: testing magnetic materials, in groups they will be given a selection of materials and a bar magnet, they will need to determine which materials are magnetic. Once complete, students can check their work against the answers provided. Next, students will investigate what happens when the poles of two bar magnets are brought together. Students will be given a set of combinations to try: N + N, S + N, S + S - attract or repel? Their results can be recorded in a table in their books and then be assessed using the mark scheme once complete. The next part of the lesson focuses on magnetic fields; firstly, students are shown the magnetic field of a bar magnet. They will have a go at drawing their own - they will have a worksheet, on it is lots of of circles surrounding a bar magnet, on each of the circles they will place a compass and then draw the direction the arrow is facing. Once complete, students should link up the arrows to show the direction of the magnetic field, they can stick this worksheet into their books. The last part of the lesson focuses on the magnetic field surrounding Earth, students are shown diagrams to demonstrate this idea and then will assess their knowledge of the subject by getting students to complete a fill-in-the-blanks task. This task can be self-assessed using the mark scheme provided in the PowerPoint presentation. The plenary task requires students to summarise what they have learned this lesson in three sentences. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. The lesson begins with an introduction to resistance, students are provided with a definition which they can write down in their books, as well as a diagram to depict what happens to electrons as they flow around the metal wires within a circuit. Students will then complete a ‘copy-and-complete’ task, this can be marked using the mark scheme provided. Students are now asked to ‘Think > Pair > Share’ their ideas about whether the thickness of the wire would affect the resistance of the wire. Students will discuss their ideas with their peers, share their ideas with the class and then watch a video to find out the answer. Students can then summarise their findings in their books by completing a fill-in-the-blank task, this can then be self-assessed once complete. Students will now be introduced to Ohm’s law, which links the resistance of a component to the current running through it and potential difference across it. Students will be given an equation triangle, they can copy this down into their books and use this to complete the set of problems on the next slide. This work can be marked and corrected once complete. Lastly, students are asked to ‘Think > Pair > Share’ their ideas about which materials are good conductors and insulators. Students can discuss their ideas and write them down into their books, answers are then revealed for students to check their work against. The last assessment task is a ‘Copy and correct’ task, students are given a paragraph of information which they will need to copy and correct the mistakes as they go. Once complete, this can be marked using the mark scheme provided. The plenary task is a choice of two tasks - to summarise what students have learned in three sentences or to write a definition for a set of key words. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. This lesson begins with an introduction to both series and parallel circuits, students can make a note of the definition for each and also draw the example circuit diagram into their books. Next, students will be shown four circuit diagrams and will need to determine whether the circuit is a parallel or a series circuit. The answers to this task can then be revealed using the PowerPoint, so students can assess their work. Students will now watch a video on series and parallel circuits, they will need to answer a set of questions whilst watching this video. The mark scheme for this task is included in the PowerPoint presentation, so students can self-assess their work using the mark scheme provided. The latter part of the lesson focuses on current and potential different in series and parallel circuits. Firstly, students will be shown a diagram which shows that current anywhere in a series circuit will be the same and shows current in the main part of the parallel circuit will get divided up between each branch. Students will then use this information to complete a worksheet, this work can then be self-assessed using the mark scheme provided. Next, students will look at how potential difference across components in a series circuit is different to that of a parallel circuit. Students will then work out the potential difference of voltmeters found in four different circuit diagrams, this task can then be marked and corrected using the answers provided. The plenary is a ‘pick a plenary’ task, students need to choose to either summarise what they have learned in three sentences or write a definition for a set of key words related to the topic of electricity. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. This lesson begins with an introduction to potential difference, students will watch a couple of minutes of a video and whilst watching will need to answer a set of questions. This task can then be self-assessed using the mark scheme provided on the PowerPoint presentation. Next, students will be shown a circuit diagram, with two voltmeters connected - one parallel to a cell and one parallel to a light bulb. Students are asked to ‘Think > Pair > Share’ their ideas about whether the potential difference is higher across the battery or across the cell. Students will then carry out an investigation to find the answer the this question. After this, students will complete a fill-in-the-blank task to summarise what they have learned so far this lesson. Once complete student can self-assess or peer-assess their work using the mark scheme provided. Lastly, students will be given a set of questions relating to potential difference and also resistance, students will need to use what they have learned this lesson as well last lesson on resistance to complete these questions. This task can then be marked and assessed using the mark scheme provided. This is followed by a very quick anagram challenge, students will need to unscramble the anagrams to spell 6 key words related to the topic of electricity, students can write a definition for each key word if they have finished. The plenary requires students to write a twitter message, summarising what they have learned this lesson, including #keywords. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. This lesson begins with an introduction to current & charge, students are provided with the definition for current and told that an ammeter is the component used to measure current, in amps. Students will then watch a short video on current, during which they will need to answer a couple of questions. Students can mark their work once this is complete. Students are then told the role of the battery in the circuit, as the store of energy which provides the push which gets the current flowing, pushing the charge around the circuit. Next, students are introduced to electrical circuit diagrams, they are firstly shown a simple circuit diagram and are asked to label the components indicated from a list of key words: switch, battery and bulb. After students have drawn the circuit and had a go at labelling it, the answers can be revealed so they can mark and assess their work. Students are now given a set of instructions to draw 4 different circuit diagrams, the answers to this task are included in the PowerPoint so students can self-assess their work using the mark scheme provided. Lastly, students will complete a task which requires them to match sentences starters to the correct sentence enders, to assess their knowledge of what they have learned this lessons. This task can then be either self-assessed or peer-assessed using the mark scheme provided. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with students being asked to ‘Think > Pair > Share’ their ideas about whether like and unlike charges attract or repel each other. After a short class discussion, students will feed their ideas back to the class and the answers can be revealed - like charges repel each other and unlike charges repel each other. Students are now introduced to the sub-atomic particles which make up an atom - protons, neutrons and electrons. From the description provided students will need to have a go at filling in the blanks on the diagram of the atom, once completed students can self-assess their work using the mark scheme provided. Next, students will complete a ‘Memory Test’ activity whereby a table of information is provided to students on the relative mass and charges of a proton, neutron and an electron. Students will be given a few minutes to observe and remember the information, then the table is taken away and students will need to recreate the table. The complete table is then shown to students so they can show mark and correct their work. Students will now complete a mid-lesson progress check to assess their knowledge of what they have learned so far this lesson, the mark scheme for this progress check is included in the PowerPoint so students can self-assess the work once complete. The next part of the lesson will focus on static charge, students will watch a video about this phenomenon and will need to answer a set of questions whilst watching. Once complete students can either self-assess or peer-assess their work using the answers provided. The last task students will need to complete is a fill-in-the-blank task, students can mark this task using the mark scheme provided. The plenary requires students to write a WhatsApp message to a friend, summarising what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a mind map task, students are given a definition for recycling and are asked to come up with a mind map of different materials which are able to be recycled. Students can discuss this in pairs and complete the mind map in their books, this work can then be self-assessed using the mark scheme provided. The next part of the lesson focuses on how aluminum is recycled, students will watch a video on the steps involved in the recycling of aluminum. They will then be given a set of jumbled statements, students will need to place the statements in the correct order to describe the method of aluminum recycling. This task can then be marked and corrected using the mark scheme provided. The next learning objective students will achieve is the ability to discuss the advantages and disadvantages of recycling. Students will need be given a card sort of statements, students will be requires to sort these statements into the correct columns - advantages/disadvantages. This task can the be self or peer assessed. Lastly, students will consider the limits to recycling, they will be shown a short video and will be required to answer a set of questions whilst watching. The mark scheme for this task is included in the PowerPoint so students can self-assess their work using the mark scheme provided. The plenary task requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap on what students should have learned in the last three lessons, students will watch a video and will need to answer a set of questions whilst watching. This task can then be self-assessed using the mark scheme provided once it is complete. Students will then be provided with a poster depicting the rock cycle and a set of statements, they will need to match the numbered stages on the poster to the correct statements. The mark scheme for this task is included in the PowerPoint so students can self-assess or peer-assess their work once it is complete. The next activity requires students to copy and complete a paragraph of information, using the key words which are provided. Once students have finished this task they can mark and correct it, using the mark scheme provided. Lastly, a true or false activity - students will stand up if they believe the statement is true and stay sat down if they believe it to be false. The answers to this task are revealed as you work your way through the activity. The plenary activity requires students to write a tweet demonstrating what they have learned today. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

his lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to igneous rocks, firstly looking at the way in which these types of rocks form and then looking at some of the physical properties. Students will now complete an each one teach one task, students will need be given some information about how rocks cool to form different types of rocks. Students will need to learn the information, teach each other and then complete the summary table. This task can then be self-assessed using the mark scheme provided. Students will now watch a video on metamorphic rocks, students will need to answer the questions and when complete can self-assess the work using the mark scheme provided. Lastly, students will complete a ‘copy and correct’ task, students will need to copy out the paragraph on the formation of igneous and metamorphic rocks and will need to correct any incorrect information. This work can also be self or peer assessed using the mark scheme provided. The plenary task requires students to write a list of key words that they have learned from the lesson today. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the three categories of rocks - sedimentary, igneous and metamorphic rock. This then follows into an introduction into weathering, students will learn about the the three types of weathering - physical, chemical and biological, students need to be able to name examples for each type of weathering. This can then be assessed in the next task, students are given a group of key words and will need to use these words to write their own description of physical, chemical and biological weathering. This work can then be self-assessed using the mark scheme provided in the PowePoint. The next part of the lesson now focuses on sedimentary rocks, students are firstly introduced to some of the common properties of sedimentary rocks. Students will then watch a video on the formation of sedimentary rocks, whilst watching this video students will answer a set of questions. This work can then be self-assessed using the mark scheme once complete. Lastly, students are provided with a set of statements, on the board or printed out as a card sort, they will need to arrange these cards in order so that they correctly describe the stages involved in the formation of sedimentary rocks. This work can be self-assessed or peer-assessed using the mark scheme provided. The plenary task requires students to write a set of quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with students being asked to ‘Think > Pair > Share’ their ideas about the factors which may be contributing to an increase of carbon dioxide in our atmosphere. Once students have had a chance to discuss their ideas about this, they can feed their ideas back to the class, their answers can then be self-assessed using the answers provided. Students will now watch a video about the greenhouse effect, whilst watching this video they will answer a set of questions. Once this task has been completed, they can self-assess their work using the mark scheme provided. Students will now copy and complete the diagram depicting the greenhouse effect by choosing the correct statements to fill in the boxes. Students are then able to peer-assess their work once complete, using the mark scheme provided. Students will now each be given a card of information which describes one of the effects of global warming on the environment, they will need to walk around the room to share information with each other in order to complete the summary table. Lastly, students will be given a set of key word groups and will need to link all three words to form a summary sentence about what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the structure of the Earth and a description of each of the layers found within the centre of the Earth. Students will now complete a ‘Memory Test’, students will need to memorise the information shown about the structure of the Earth. They will then be given a blank worksheet to copy down as much information as they can remember, this will the be self-assessed using the mark scheme provided. The next part of the lesson focuses on the composition of elements found in the Earth’s crust, students will firstly be shown a table which shows % composition of different elements found in the Earth’s crust. Students will then watch a video demonstrating the steps involved with drawing a pie chart. Students will then need to use the skills acquired to carry out the necessary calculations and draw a pie chart, using the data provided. Once complete, students can then self-assess their work using the mark scheme provided. Lastly, students will learn about the gases which are found within the Earth’s atmosphere and how these have changed over time. Students will compare the composition of the Earth’s atmosphere today to the Earth’s atmosphere 3 billion years ago. Firstly, they are asked to describe the changes which have occurred over the 3 billion years and secondly they will need to draw a pie chart to represent the composition of the Earth’s atmosphere today. The plenary task is an anagram challenge, students are given five anagrams of key words learned this lesson. They will need to unscramble them to figure them out, the answers to this task is included in the PowerPoint. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be introduced to carbon as being one of the main constituents of life, as it is present within many molecules inside the human body - DNA, carbohydrates, fats & proteins. Students will also be introduced to the idea of ‘carbon sinks’. Students will now watch a video on the carbon cycle, students will need to answer a set of questions whilst watching this video. This task can then be self-assessed using the mark scheme provided. Next, students will be given a ‘fill-in-the-blank’ task to complete using the key words provided on the PowerPoint presenation. Students can self-assess their work using the mark scheme provided once this task is complete. Next, students will watch another video on the processes involved in the Carbon Cycle. Whilst watching this video they will be given a number of captions, which they will need to use in oder to fill in blanks on a worksheet. This task can be self-assessed using the mark scheme provided, once it is complete. Lastly, students will be given a series of pictures and words/descriptions which they need to use in order to construct their own poster of the carbon cycle, they will need to add arrows to demonstrate where the carbon is moving from and to. This task can be self-assessed using the mark scheme provided on the PowerPoint presentation. The final task requires students to read of piece of information, using this they should discuss and write down some changes that we could implement at home, and on a national scale, to help reduce our carbon emissions. The plenary is a ‘pick a plenary’ task, students will either choose to write down a summary of what they have learned this lesson in three sentences, or they may choose to write definitions for a set of key words that are provided. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to composite materials, students will be told the definition of a composite material and will be given two examples - MDF & reinforced concrete - including details on the physical properties of these materials. Students will now carry out an investigation into the properties of reinforced concrete vs. concrete. Students should follow the instructions on the sheet to complete the investigation, once complete students can test the concrete by performing some tests on the blocks. Students will now be introduced to other composite materials, firstly carbon-fibre, students will listen to an audio piece of a cyclist explaining the usefulness of carbon-fibre for bikes and bike accessories. This task can be self-assessed using the mark scheme provided, once complete. Next, students will complete an ‘Each one, teach one’ task. For this, students will be in pairs and will need to learn a piece of information about a composite materials - either nylon or glass-fibre-reinforced aluminium. Once learned, students will then teach their partners about the substances used to make the material, the properties of the materials and some examples of uses. Students will use the information to complete a summary table, this work can then be marked and corrected using the mark scheme provided. The plenary task requires students to come up with a question for five answers which are provided, this will assess students knowledge of what they have learned through this module. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a task whereby students will walk around the room looking at different objects, as a circus activity. Students need to use the key words included on the board to describe these objects, there work can be marked and assessed once it is complete. Now, students are introduced to ‘ceramics’ as a material, they are given examples of objects which are made out of ceramic material and are asked to ‘Think > Pair > Share’ their ideas over what physical properties they may have. Once this task is complete, the physical properties and chemical properties of ceramics will be given to students to make a note of. Students now each be given a piece of information on a ceramic material and its uses, they will need to walk around the room and share information with each other to complete a summary table of information. This can then be marked and assessed using the mark scheme provided. Students will now be shown a diagram which demonstrates the structural qualities of ceramic materials, this explains why they have such high melting points. Students can sketch the diagram into their books and make a note of the details provided. Lastly, students will be need to complete a ‘copy and correct’ task. This requires students to copy out a piece of text, making any amendments they deem necessary so that the paragraph makes sense. This work can the be self-assessed using the mark scheme provided. The plenary task is for students to spend a minute talking to each other about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The first task is for pupils to research, either using their phones or using laptops, the dates at which different metals were discovered. Once they have found the dates and filled in their table, they should consider the link between the reactivity of the metal and when it was discovered. After a class discussion of their ideas, students are introduced the idea of a metal ore. The next task is for pupils to watch a video and answer questions on metal extraction, the answers to which are included in the PowerPoint presentation so students are able to self-assess their work. The next part of the lesson focuses on how metals can be extracted from their ores, firstly students will be shown the position of carbon within the reactivity series. They will then be told that any metal below carbon in the reactivity series is able to be extracted from its oxide by a reaction with carbon. The general word equation for this reaction is shown to students, they can make a note of this in their books. They will then be asked to write down the complete word equations for the reactions of copper, iron and zinc with carbon. The mark scheme for this is provided on the PowerPoint presentation for students to mark and correct their work once complete. Lastly, students need to be able to work out the amount of metal present in an ore. A worked example of this calculation is shown to students, they can make a note of the steps when approaching a question of this sort in their books. They will be then given a worksheet of questions to answer which requires students to calculate the masses of useful metal found in metal ores, as well as the waste. The mark scheme for this task is included in the PowerPoint so students can self or peer assess their work once it is complete. The plenary requires students to write a Whatsapp message to friends, explaining what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap on the reactivity series, students will be asked a seris a questions about certain metals found within the series. Students should be able to identify the metals based upon knowledge learned in previous lessons, once complete this task can be self-assessed using the mark scheme provided. Students will now be introduced to the idea of a ‘displacement reaction’ as a reaction where a more reactive metal found in the reactivity series will displace a less reactive metal. An example is shown - aluminium oxide + iron -> aluminium oxide + iron. Students will then be give a set of reactions, without the products written in, they will need to decide whether a displacement reaction will take place or not. This work can then be marked and corrected using the mark scheme provided. Students will now complete an investigation ‘Competition in Metals’. Students will follow the steps provided on the investigation worksheet to identify whether a displacement reaction has occurred between a number of metals + metal solutions. Students will fill in a results table as they go, noting down any observations as well as identifying if a reaction took place or not. Students can check their answers against the example results table found in the PowerPoint presentation. Lastly, students will complete a ‘True or False’ task, they will be given a set of statements and will need to identify whether they are true or false. This work can be peer or self assessed using the mark scheme provided. The plenary task requires students to complete a sentence starter, from the choice provided, in order to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a demonstration, students will be shown a demo whereby alkali metals are dropped in water one at a time, students need to note down their observations in a table. Once this is complete, students will be asked to predict what happens when francium and caesium are dropped in water, students will then watch a video to check whether their answer is correct. Students will now be shown the general word equation for a metal + water, students will now be asked to copy and complete a set of further metal + water word equations. This task can then be assessed using the mark scheme provided. Next, students will be given a set of statements and a number of grouped metals, knowing what they do about the reactivity of these metals with oxygen and with acid (from previous lessons) students will be asked to match the groups of metals to the correct statements - describing their relative reactivity. Once this task has been completed, students can self-assess their work using the mark scheme provided. Following this, students will need to use the statements provided to describe the way in which these metals react with dilute acid, once this task is complete students can self-assess their work. Students will now be shown the word equation for the reaction of metal with steam, including the balanced symbol equation, with state symbols. Students will be asked to then write out the balanced symbol equation for zinc + steam, the answer to this will be provided so students can mark their work. Lastly, students are given a set of sentence starters (metals) and they will need to match these to the correct sentence enders (description of the metal). This work can be marked and corrected using the mark scheme provided. The plenary task requires students to write down three facts, three key words and one question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)