This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Infection & Response’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Infection & Response’ SoW, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed to meet specification points for the NEW AQA Trilogy Specification, particularly for the 'Cells' SoW. For more lessons designed for the new AQA Trilogy GCSE Biology, Chemistry and Physics specifications please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a definition for osmosis and defining the difference between solvent and solutes. Pupils are then asked to think > pair > share about what they think a partially permeable membrane might be. In the next activity, pupils are given a definition for concentrated and dilute solutions and are shown three different diagrams, they need to decide whether they are showing pure water, a concentrated or a dilute solution. Now pupils are introduced to isotonic, hypertonic and hypotonic solutions. They are firstly shown what happens to animals cells in each of these solutions using an animation. Pupils will then need to match the type of solution to it's description and also complete a cartoon strip to explain what happens to animal cells in each of these solutions, a list of key words is provided. Students will then think about the importance of osmosis to plants and will need to match diagrams of plant cells in isotonic/hypertonic/hypotonic solutions to the correct description. The last activity is an exam-style question on osmosis, pupils can self-assess their work using the mark scheme provided. The plenary task is for pupils to write 5 summary sentences about what they have learnt so far using the list of key words provided. Thanks for looking :) please leave any feedback if you purchase!

This is a lesson aimed at the new GCSE Physics specification, it meets specification points for the 'Energy' module. For more lessons within this series please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students considering how energy is transferred to useful or wasted energy stores and the concept of energy dissipation is introduced. The first activity involves students filling in a worksheet to identify the useful and wasted energy transfers in different systems, this is then self-assessed using the answers on the PowerPoint. Pupils are then given the opportunity to describe the energy transfers of a pendulum, particularly thinking about why a pendulum eventually comes to a stop. Pupils can self-assess their work using the mark scheme on the PowerPoint. Pupils are then introduced to energy 'efficiency' and how they can use the wasted and useful energy values of a system to calculate the efficiency of this device. Pupils are firstly given some easier calculations to try which can be modelled on the board, answers are provided. Pupils can then complete the worksheet of calculations, which they can self-assess using the answers on the Power Point slide. For the last activity pupils are required to copy and complete a table, filling in missing values of either the efficiency, the wasted energy or useful energy values of different devices. Pupils can again self-assess using the answers provided. The plenary activity is a past-paper exit card, I get pupils to hand the completed worksheet to me as they leave and I will mark it and hand it back to them for the next lesson with a grade and improvements. Thanks for purchasing, please let me know if you have any feedback :). Worksheets are found at the end of the PowerPoint slide and all answers are provided so pupils can peer or self-assess their work throughout the lesson.

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Ecology’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Bioenergetics’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a think > pair > share task for pupils to discuss some questions about muscle, after a short class discussion you can the answers to these questions and talk them through with the students (all on the PowerPoint). Next pupils can sum up what they have learnt so far by completing a fill in the blank task, which then can be self-assessed. Now pupils will be given cards of information about how heart rate, breathing rate and concentrations of glycogen change during exercise and most importantly, why these response occur. Pupils can read their information card in pairs and using this they can fill in the table in their books. This activity is likely to take 15-20 minutes, once finished they can self-assess their work using the answers provided. A mid-plenary task will quickly assess students knowledge of what they have learnt so far, then the final activity is a 10 mark exam-style question. You could allow pupils more time to answer these questions or for higher ability set a 10 minute timer and request that they complete in silent, exam conditions. The mark scheme is provided for pupils to mark their own work. The plenary task is a 4-mark exam question with mark scheme provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a resource which contains all of the learning outcomes for the new AQA GCSE Biology 'Organisation' SoW. Pupils should mark whether they feel they very confident (green), a little confident (amber) or not confident at all (red) for their ability to achieve each learning outcome. This can be used before an end-of-topic test on 'organisation' for pupils to reflect on areas of revision which are most important. It can also be used again after to see whether students have progressed in their understanding of the topic.

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Cells’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Infection & Response’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes and electrolysis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students are firstly introduced to the idea of a displacement reaction using an example of aluminium and iron oxide, pupils will then be given a list of chemical reactions and for each one students will need to decide whether a displacement reaction will occur. Students will now conduct an investigation whereby they will place a metal - copper, magnesium, iron and zinc - into copper sulphate solution and observe what happens. Using the results from this investigation, students should decide on the order of reactivity of these metals. Students are now given another list of reactions, for each one students need to now decide if a displacement reaction will take place and if so write out the word equation for each. Students can mark their work using the answers provided. The next part of the lesson focuses on oxidation and reduction, firstly students are provided with a definition of these two processes. They are then shown how to write an ionic half equation to demonstrate what is happening what is happening during a displacement reaction, which metal has been oxidised and which has been reduced. Pupils need to complete the ionic half equations for a list of reactions, pupils can assess their work against the answers provided on the PowerPoint presentation. The last task is a progress check, students need to work their way through a set of questions to assess what they have learnt this lesson. The answers to which are included on the PowerPoint slides forstudents to self-assess or peer-assess their work. The plenary task is for pupils to write a twitter message about what they learnt this lesson, no more than 140 characters and #keywords!! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Combined Science:Trilogy Biology GCSE, particularly the 'Bioenergetics' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by students thinking about the raw materials needed for plants to photosynthesise and which factors might limit the rate. The three factors which students will need to learn about are then revealed - carbon dioxide, light intensity and temperature. Three limiting factor graphs are then shown for each of these factors and students need to have a go at explaining what the graphs are showing, as a class discussion. Pupils will then need to complete a fill-in-the-blank task and self- their assess their work using the answers provided. Next pupils are shown a green leaf and a variegated leaf and are asked to think>pair>share which leaf they believe will have a higher rate of photosynthesis, and why. This then leads to pupils learning that less chlorophyll means less photosynthesis will take place, which could lead to stunted growth. The next part of the lesson focuses on pupils being able to use practical equipment to set up an investigation which measure the effect of light intensity on rate of photosynthesis. Pupils will firstly be given some images of equipment they could use and are asked to come up with a potential method for this investigation. After this pupils are then shown a video where they have to answers questions about the variables in this investigation and finally they are given a set of results to plot data and analyse it. The plenary is a silent 5 task where pupils need to answer questions about what they learnt this lesson on their own in their books. All resources are included either at the end of the presentation or as a separate file. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a resource which meets specification points within the NEW AQA GCSE Trilogy 'Cells' Sow. Other lessons designed for the new 'Cells' SoW and other new Trilogy Biology and Physics SoW can be found in my TES shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by identifying the purpose of mitosis - growth and repair. Pupils will then be given a double-sided worksheet, the first side corresponds to the first 5 mins 51 seconds of the video included in the PowerPoint slide. Pupils will need to watch the video and answer the questions on the sheet, they are in order but for lower ability classes you may want to stop the video and guide pupils through the work. Self-assess this work using the answers provided in the PowerPoint before moving on with the video. The next part of the video guides pupils through what happens during Mitosis - Prophase, Metaphase, Anaphase, Telophase. Pupils have diagrams of the the processes on the back of their worksheet, they will need to use the video to name the stages and describe what is happening. Self-assess work using the answers that are provided in the PowerPoint. The next activity, pupils are given real images of a cell going through mitosis and descriptions of the stages, they need to cut and stick the stages and the pictures in the correct order to complete a flow diagram. Pupils peer or self-assess their work using red/green pens. **Past-paper question provided as an extra activity for higher-ability pupils - pupils answer the question in their books and peer-assess using the mark scheme** Plenary - pupils write a text message or a tweet to their friend to tell them what they have learnt about this lesson. All resources are included, as well as mark schemes for when pupils self/peer-assess their work. Please leave a review with feedback :) thanks!

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Molecules & Matter’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Firstly, students are asked to ‘Think > Pair > Share’ their ideas about how a gas exerts pressure upon a surface. Students will need to discuss their ideas within groups before feeding back the class, the explanation can then be revealed using the PowerPoint presentation - including a diagram. Students will then watch a video on gas pressure and temperature, students will need to answer a set of questions whilst watching the video. Once this has been completed students can self-assess their working using the mark scheme provided. Students are now shown some information on an investigation into the effect of temperature on gas pressure, using the PowerPoint presentation. Students will need to read the information and and answer questions on a worksheet, this work can then be self or peer assessed using the mark scheme provided. Lastly, students are now given an information sheet about observing random motion of gas particles using a smoke within a smoke cell. Students will be given a set of questions that they will need to answer after reading the information sheet, they can work together in pairs. The mark scheme for this task is included in the PowerPoint so students can assess and correct their work once this is complete. The plenary task requires pupils to complete a set of sentence starters to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 P1.4 Module on ‘Space’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with a video on ionic bonding, students need to watch the video and answer a set of questions, once complete pupils can self-assess their work. Pupils are then asked to think > pair > share how the group number relates to the charge on the ions formed from that group. Using the PowerPoint presentation you can then demonstrate the link between group number and number of electrons lost/gained by a specific atom, students can use these rules to help work out the charges on ions formed. To assess their knowledge of this, pupils will be asked to copy and complete a table to identify the number of protons, electron, the electronic configuration of an atom and of the ion of that atom, as well as the ion’s charge. Pupils can self or peer assess their work using the answers provided in the PowerPoint presentation. The next part of the lesson is for pupils to consider the ionic bond formed in calcium chloride, students will first need to draw the electronic configuration of a calcium and chlorine atom and then looking at the structure try and work out how an ionic bond might form between them. Once pupils have had a go you can reveal the answers using the diagrams and descriptions provided in the PowerPoint presentation, for those pupils who were unable to work it out it may be best for them to copy down the diagram in their books. Pupils will now be asked to draw diagrams to demonstrate the ionic bonds formed between a set of elements - calcium and oxygen, potassium and chlorine, sodium and oxygen, magnesium and chlorine. Once complete they can assess and correct their work using the answers provided in the PowerPoint presentation. The last activity is an exam-style question which pupils can complete in silence, and at the back of their books if it is a higher ability class. When complete the work can be red-pen assessed using the mark scheme provided. The plenary activity is for pupils to summarise what they have learnt in the lesson in three sentences, using as many of the key words provided as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap on the differences between elements, compound and mixture, pupils complete a task and self-assess their work. Pupils are then introduced to the idea of covalent bonding and ionic bonding as two forms of bonding and are reminded how to draw the electronic configuration of an atom, including a reminder of the rules around filling energy shells. Pupils will now watch a video on the formation of ions, whilst watching the video pupils will answer a set of questions and when finished pupils can assess their work using the answers provided in the PowerPoint. Next, pupils will be shown how to draw diagrams to demonstrate the formation of positive and negative ions, they can draw examples in their books for future reference. To assess their knowledge of this topic pupils will complete a set of questions including drawing a diagram to demonstrate the formation of an ionic bond between lithium and fluorine, this can then be self or peer assessed using the answers provided. The last task is for pupils to use their periodic table to draw the electronic structure of the ions formed from a potassium, oxygen, magnesium and calcium atom. This work will then be assessed using the answers provided. The plenary involves pupils picking a task, wither write a twitter message about what they have learnt or write a set of quiz questions to test peers on what they have learnt in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a resource which meets specification points for the NEW AQA GCSE Physics 'Energy' module. The lesson begins by introducing the concept of gravitational potential energy stores, pupils will have learnt about this in the first lessons from this module on 'Energy stores' (found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience). Pupils are then given the first calculation needed to calculate the change in gravitational potential energy of an object (weight x height). Pupils can then practise using this calculation by copying and completing the task on the next slide. Pupils will self-assess their work, answers provided on a PowerPoint slide. Pupils are then introduced to the second calculation they can use to calculate the change in gravitational potential energy of an object (mass x gravitational field strength x height). Pupils can then complete questions 1-5 on the worksheet provided and once finished they can self-assess their work. The final activity is for pupils to look at a past-paper question, with their partners they can discuss how to go about answering the question. Following a class discussion pupils can attempt to answer the question and then self-assess their work. **For higher ability pupils they can complete the question without the class discussion**. The plenary is a '30 second conversation', pupils turn to their partners and talk about what they have learnt this lesson for 30 seconds. All resources are included at the end of the PowerPoint.

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils are firstly asked to come up with a food chain for humans eating rice, then humans eating chickens and to consider the differences in energy efficiency between the two. This then leads onto the second slide which explains how shorter food chains mean more efficient food production. The second task is for pupils to think > pair > share ideas about methods farmers could employ to ensure animals gain new biomass at an efficient rate. Once pupils have written their ideas down in their books the answers can be revealed on the PowerPoint, students can check their work against the answers and correct anything they need to. The methods listed on the PowerPoint have disadvantages, pupils should then have a short discussion in pairs of what these negatives are before they are revealed. The next part of the lesson focuses on fish stocks, students are given some information and are asked to consider how we might sustainably manage fish stocks. Once students have some to discuss as groups and then as a class, pupils are given a set of questions they will need to answer whilst watching a video. Once this is complete students can self-assess their work. The last part of the lesson focuses on biotechnology in food production. Students will be given some information sheet in their groups and should use this information to answer a set of questions, once pupils have completed these questions they can self or peer-assess their work using the mark scheme provided. The very last task may be more suited to higher-ability classes. Pupils will be given a set of jumbled up sentences, students need to place the sentences in the correct order to describe the process of making mycoprotein, students can assess their work once complete. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students considering in pairs/groups the names of different methods of contraception they have already heard of, they can create a mind map in their book which can then be checked against the list provided. Pupils will then watch a video which runs through some of the types of contraception out there and their pro’s and con’s, pupils will need to watch the video and note down as many advantages and disadvantages of these methods of contraception as they can. This task can be self-assessed using the answers provided. In the next activity pupils will be given a card sort in pairs or in groups, they will need to read through the information on methods of contraception and complete a table to summarise how these methods work or prevent pregnancy as well as their advantages and disadvantages. The next part of the lesson looks at the history of contraception, pupils will watch a video about Margaret Sanger - a progressive nurse in New York during the early 20th century. They will need to answer questions whilst watching the video, once finished their answers can be checked against the mark scheme provided. The final task is a ‘quick check -silent 5’ task, pupils will need to answer the summary questions about what they have learnt this lesson into their books. The plenary activity is for pupils to summarise what they have learnt this lesson in three sentences, using the list of key words that have been provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by introducing pupils to the definition of a clone and outlining the different cloning techniques they will learn about in this lesson. Pupils will firstly learn about two techniques used to clone plants - cuttings and tissue culture. Pupils will learn about these two techniques and will need to complete the correct descriptions on a diagram demonstrating the steps involved with taking plant cuttings. Once this is complete the work can be self-assessed. The second part of the lesson focuses on adult cloning. Firstly pupils are talked through the process of embryo transplants using a diagram. Pupils will be provided with a worksheet with a flow diagram of the embryo transplant process but missing statements to describe the process. Pupils will need to choose the correct statements to go in these boxes, this work can be assessed using the answers provided once complete. Adult cell cloning is the other example of an animal cloning technique pupils will need to describe. Firstly, pupils will watch a video about Dolly the sheep and the adult cell cloning process, using this video they will need to answer some questions. This can be checked against the answers which will be provided. For the next activity pupils will be provided with the diagram of the sequence of events involved in the adult cell cloning process, pupils will be required to fill in the blanks to complete the descriptions of the steps involved. Once completed pupils can use the mark scheme to assess their work. The final activity focuses on the risks and benefits of adult cell cloning, pupils will be given a list of opinions about this cloning technique and they will need sort them into advantages/disadvantages in their books. The plenary activity is for pupils to pick a task: either write a twitter message about what they have learnt this lesson or unscramble anagrams to spell out 5 key words from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)