This task is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Chemical Changes’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Using Our Resources’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a recap of the three main types of radiation: alpha, beta and gamma radiation. Students will firstly be asked to draw and label a diagram to show how each of these types of radiation can be stopped. Students will then be given some information about the penetrating power of these three types of radiation, using the information and their own knowledge students will need to complete a summary worksheet. Once this has been completed students can self-assess their work using the mark scheme provided. The next part of the lesson will focus on the dangers of radiation, firstly students will be shown a teacher/technician demonstration of the different types of radiation, outlining some of the dangers and precautions taken when handling radioactive sources. Students can complete a table of information on the relative dangers of these radioactive sources whilst watching the demo. This work can self-assessed against the mark scheme provided once it is complete. Next, pupils are asked to ‘Think > Pair > Share’ ideas about how scientists/workers can protect themselves against the hazards of ionising radiation. After a short class discussion the answers can be revealed for students to check their work and take extra notes if necessary. Lastly, students are asked to think about the uses of radiation, they will be given a list and they will need to determine which are real uses of radiation. The real uses of alpha, beta and gamma radiation can then be revealed on the PowerPoint presentation - students can check their answers and take notes on extra uses. The plenary task is for students to talk to the person next to them for one minute about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 8 B2.1 Module on ‘Separation Techniques’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 P1.1 Module on ‘Forces’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 P1.2 Module on ‘Sound’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 C1.1 Module on ‘Particles & Their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This resource contains 11 homework activities, and detailed mark schemes, which meet all learning outcomes within the Year 7 Biology, Chemistry and Physics Units: Biology: B1.1 Cells B1.2 Structure & Function of Body Systems B1.3 Reproduction Chemistry C1.1 Particles & Their Behaviour C1.2 Elements, Atoms & Compounds C1.3 Chemical Reactions C1.4 Acids & Alkalis Physics P1.1 Forces P1.2 Sound P1.3 Light P1.4 Space The resources were designed with the Year 7 Activate course in mind, it contains up to 24 weeks worth of homework content!! You can find more lesson bundles aimed for the KS3 and KS4 science curriculum at: https://www.tes.com/teaching-resources/shop/SWiftScience

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Electricity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a defintion of resistance, using diagrams to demonstrate the effect of a high resistance on the current flowing around an electrical circuit. Students will then need to summarise this information by completing a ‘fill-in-blank’ task, which can then be marked using the mark scheme provided. The next part of the lesson asks students to consider the effect of the thickness of the wire on resistance in a circuit. Students can ‘Think > Pair > Share’ their ideas before watching a video which reveal the answer, after students have watched the video they can summarise the main points by completing a ‘Fill-in-the-blank’ task. This task can then be self-assessed using the mark scheme provided. Next, students are introduced to the calculation for resistance (R = V/I), pupils can copy the formula triangle down into their books before being given set of problems to work through. Students should make sure to show all their working in their books and include the correct units, pupils can then self or peer assess their work using the mark scheme provided. The next part of the lesson focuses on potential difference and resistance, students will be given a set of information about potential difference and resistance, using which they will need to answer a set of questions. The mark scheme for this work is provided in the PowerPoint presentation so students can self-assess their work once complete. The last part of the lesson focuses on ‘Ohm’s Law’, students are firstly shown a circuit by which you can determine how the current across a wire is dependent upon the potential difference across that wire and also a graph to prove that current is directly proportional to the potential difference. Students will be given a set of data to plot, using the graph they have plotted they will then answer a set of questions. The plenary task is an anagram challenge of key words from the ‘Electricity’ unit so far! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Electricity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap on the calculations that students have learned so far in this topic, students are asked to ‘Think > Pair > Share’ their ideas about the calculation needed to work out the energy transferred to an appliance and the power supplied to an appliance. The answers can then be revealed and students will need to complete a set of questions on a worksheet, this task can be self-assessed using the mark scheme provided. Next, students will watch a video on ‘efficiency’ and whilst watching they will need to answer a set of questions, this work can then be self-assessed using the answers provided. Next, pupils will need to rearrange the equation for efficiency in order to work out the output power of an appliance and using this they will answer a set of questions. The mark scheme for the first part of the questions are included in the PowerPoint so students can assess their own work. Pupils will now be given a set of problems to work through, using the efficiency calculations they have just learned, if they finish the questions on the PowerPoint slide there is a separate worksheet of problems that pupils can work their way through. The mark scheme for the first set of questions is included in the PowerPoint for pupils to self-assess their work. Next, students will be shown how electrical appliances lose waste energy, from this information students will need to summarise using a fill-in-the-blank task. Again, the answers for this task is included in the PowerPoint for students to either peer or self-asses their work. The plenary task is an anagram challenge, pupils will have to unscramble a 6 words which all relate to the ‘Electricity’ topic. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Inheritance, variation & evolution’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Organisation’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Organisation’ SoW, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Infection & Response’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Infection & Response’ SoW, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Infection & Response’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Infection & Response’ SoW, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW and specifically designed for the higher tier GCSE chemistry students. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with students learning how to calculate the number of moles of a gas when you know the molar gas volume. Students will then work their way through a set of questions using this calculation, for latter questions students will need to rearrange the equation. This work can then be assessed using the answers provided in the PowerPoint presentation. The next part of the lesson focuses on calculating the masses of gaseous reactants and products, firstly students are shown a worked example. The next task is for pupils to watch a video, using which they should answer a set of questions. Once this task has been completed students shoudl mark their work using the answers provided. Using the formula they have learnt whilst watching the video, they should now complete a set of questions on a specific chemical reaction - this required students to calculate the volume of gases produced or the mass of a reactant needed to produce a certain amount of a gas product. This work can be self-assessed using the answers provided in the PowerPoint presentation. The next task is a further set of problems requiring students to calculate the volume of gaseous reactants or products given a balanced symbol equation for a chemical reaction. The last task requires pupils to come up with 4 exam questions on the topic of gas volumes, they should also include a mark scheme for each of the questions. Once they have competed their questions they should swap with the person next to them and complete their partners questions, these can be self or peer-assessed using the mark schemes they have written. The plenary task is for pupils to write a WhatsApp message to their friends to tell them what they have learnt about this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction into how sound can be ‘seen’ by using an oscilloscope. The PowerPoint then moves on to look at the differences between the ‘intensity’ of a sound and the ‘pitch’ of the sound. Students can copy and complete a set of sentences to summarise what they have learned so far as part of a ‘progress check’ - this work can then be marked using the mark scheme included. Students will then be given two different sound waves, they will need to use what they have learned so far to write a description/comparison of each of the waves, a list of key words will be provided to hep students. A model answer to this question is included in the PowerPoint so students can self-assess their work once it is complete. Students will now be given a worksheet of sound waves, along with a worksheet describing the sounds collected by the ‘Most Haunted’ team of a range of ghost sounds. Students will need to compare the description of the ghosts to the sound waves collected and match them correctly. This work can then be marked and corrected using the answers provided on the PowerPoint. Students will now think about the frequencies that humans can hear compared to other animals. The first activity requires students to watch a video which plays a set of sounds starting with a frequency of 500 Hz to 20,000 Hz. Students can put their hands up in the air until they can no longer hear the sound, you will need to turn the volume right up! Students are then told the audible range of humans compared to other animals like dolphins, hedgehogs and bats. The plenary activity requires students to complete a set of sentences, including outlining what they have learned today, what they already knew and what they would like to know more about. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Using Our Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with a Think > Pair > Share task for pupils to consider the properties of gold, pupils can list them down and then share their ideas with the class. The property of gold being very soft is not always useful, especially when it is being used to make jewelery and so it is often mixed with another metal (e.g. platinum) to make it stronger. The concept of an ‘alloy’ is then introduced, as well as a definition and an explanation as to why alloys are useful. Some useful properties of alloys are listed - malleable, durable, strong, flexible - pupils need to come up with a a definition for each of these properties. Once this task is complete students can self-assess their work using the mark scheme provided. The next task for pupils to complete is ‘Who’s right for the job?’ - students will be given information on the properties of different metals, as well as a list of alloys needed for different jobs - used in jewelery/used to make airplane bodies. Students need to select the correct metals to make the alloys required, their work can be self-assessed using the mark scheme provided. The next part of the lesson focuses on iron alloys specifically, firstly students will watch a video on iron alloys and will need to answer a set of questions - this work can then be self-assessed using the answers provided. The last task for pupils to complete is a table whereby students need summarise how carbon content affects steel and it’s properties, this work can also be self-assessed using the mark scheme provided. The plenary task requires pupils to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson which meets specification points for the new AQA 'Energy' module (2016). The lesson begins by considering whether a pendulum placed in a vacuum will carry on swinging, pupils can discuss their thoughts and there is a video which shows an experiment taking place with a pendulum placed in different mediums. Pupils can then draw a diagram to show the energy transfers taking place as a pendulum swings. Pupils are the introduced to the principal of the conservation of energy, they can write this definition down in their books. Pupils are then given a blank cartoon strip, pupils will need to complete the captions to describe the energy transfers taking place during a bungee jump and they can draw a diagram to represent what is happening for each caption. **This task could be difficult for lower ability students, you can provide the words that go in the blanks on the board for pupils who may struggle with his task.** The next slide has progress check questions for pupils to complete in their books, pupils can then peer-assess their work. **Slides 6-7, which contain additional tasks on the conservation of energy - a fill-in-the blank task & a word search - could be used as an alternative to the more difficult progress check questions for classes of lower ability, or could be used as an extra activity for higher ability classes** The plenary is a 3-2-1 task, pupils state 3 facts, 2 key words and create 1 question to test peers on the topic of the lesson. All resources for this lesson are found at the end of the PowerPoint.

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a PowerPoint slide which demonstrates how sunlight falling on plants is the initial source of energy for all living organisms. This moves on to a video which outlines the key terms related to food chains, pupils will be provided with a set of questions which they will need to answer using the video. Once pupils has completed this task pupils they can self-assess their work using the mark scheme provided. Pupils will then be shown an example of a food chain and the PowerPoint slide will reiterate what the video outlined, about what a food chain and the arrow in the food chains demonstrates. Pupils will then need to complete a task where they match key terms to their definitions and examples. This work can assessed once the task is complete. The next part of the lesson will focus on animal populations and dynamics. The first task pupils will be given a set of questions about the impact of various changes on animal populations (i.e. predator numbers, disease). In groups/pairs they will be given a piece of A3 paper and they will need to answer the questions as best they can. Pupils can then check their answers against the answers provided in the PowerPoint presentation. Pupils will then be given a food web and asked a set of questions about how various changes in the numbers of organisms within the food web would impact others, again this work can be self-assessed. The final activity is for pupils to draw a graph to represent data on the numbers of coyote and jack rabbits over the course of twenty years, pupils will then need to answer questions about this data. The plenary task is for pupils to complete a food chain choosing from a set of organisms provided on the PowerPoint slide, as an extra challenge pupils could try and complete their own food webs. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be shown a demonstration of magnesium being burnt in air, students are asked to predict whether they think the mass of the product will increase, decrease or stay the same. Students are asked to explain their prediction. The demonstration is then carried out, students should record in their books the mass of the magnesium before burning and then the mass of the magnesium oxide after burning, from this they can deduce the mass of the oxygen needed to burn the magnesium. Students can then check their predictions to see if they were correct or not. Now, students can summarise what they have learned by completing a ‘fill-in-the-blank’ task which is a definition for the ‘conservation of mass’ in chemical reactions. This task can be self-assessed against the mark scheme provided. Students will now also complete a ‘Quick Check’ task where they are asked come questions to test their knowledge of what they have learned so far, this work can also be marked against the mark scheme provided. Students will not complete a match-up task, students are asked to complete the sentences by matching the correct phrases together. This helps students to explore the idea of the law of the conservation of mass, considering how this applies to reactions involving solids, liquids and gases. Again, the mark scheme for this task is included for students to check and correct their work. The latter part of the lesson is on balancing equations, students are firstly introduced to the process by which students should balance an equation, demonstrated by the example of magnesium + oxygen -> magnesium oxide. A few more examples are used to talk students through the process, then students will complete a step-by-step worksheet which introduces them to balancing equations at a basic level. The mark scheme for this task is included in the PowerPoint for students to self-assess their work. The plenary task requires students to complete a 3-2-1 reduction of the lesson, to include 3 facts 2 key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)