Powerpoint lecture covering the following in a modern, concise format: Specification Point 3.3.1 - Introduction to organic chemistry. Specification Point 3.3.1.1 - Nomenclature. Complete set of Chapter 5 Lectures are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 4.48C - Know that condensation polymerisation, in which a dicarboxylic acid reacts with a diol, produces a polyester and water. Specification Point 4.49C - Understand how to write the structural and displayed formula of a polyester, showing the repeat unit, given the formulae of the monomers from which it is formed including the reaction of ethanedioic acid and ethanediol. Specification Point 4.50C - Know that some polyesters, known as biopolyesters, are biodegradable. Complete set of Chapter 7 Lessons are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 4.44 - Know that an addition polymer is formed by joining up many small molecules called monomers. Specification Point 4.45 - Understand how to draw the repeat unit of an addition polymer, including polyethene, polypropene, polychloroethene and polytetrafluoroethene. Specification Point 4.46 - Understand how to deduce the structure of a monomer from the repeat unit of an addition polymer and vice versa. Specification Point 4.47 - Explain problems in the disposal of addition polymers. Complete set of Chapter 7 Lessons are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 3.17 - Know that some reactions are reversible and this is indicated by the symbol ⇌ in equations. Specification Point 3.18 - Describe reversible reactions such as the dehydration of hydrated copper (II) sulphate and the effect of heat on ammonium chloride. Complete set of Chapter 6 Lectures are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 4.48C - Know that condensation polymerisation, in which a dicarboxylic acid reacts with a diol, produces a polyester and water. Specification Point 4.49C - Understand how to write the structural and displayed formula of a polyester, showing the repeat unit, given the formulae of the monomers from which it is formed including the reaction of ethanedioic acid and ethanediol. Specification Point 4.50C - Know that some polyesters, known as biopolyesters, are biodegradable. Complete set of Chapter 7 Lectures are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 3 - Calculating Solubility. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 1.5C - Know what is meant by the term solubility in the units grams per 100 grams of solvent. Specification Point 1.6C - Understand how to plot and interpret solubility curves. Specification Point 1.7C - Practical: investigate the solubility of a solid in water at a specific temperature. Complete set of Chapter 1 Worksheets are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 4.11 - Know that a fuel is a substance that, when burned, releases heat energy. Specification Point 4.12 - Know the possible products of complete and incomplete combustion of hydrocarbons with oxygen in the air. Specification Point 4.13 - Understand why carbon monoxide is poisonous, in terms of its effect on the capacity of blood to transport oxygen. Specification Point 4.14 - Know that, in car engines, the temperature reached is high enough to allow nitrogen and oxygen from air to react, forming oxides of nitrogen. Specification Point 4.14 - Know that, in car engines, the temperature reached is high enough to allow nitrogen and oxygen from air to react, forming oxides of nitrogen. Specification Point 4.15 - Explain how the combustion of some impurities in hydrocarbon fuels results in the formation of sulphur dioxide. Specification Point 4.16 - Understand how sulphur dioxide and oxides of nitrogen contribute to acid rain. Specification Point 4.17 - Describe how long-chain alkanes are converted to alkenes and shorter-chain alkanes by catalytic cracking. Specification Point 4.18 - Explain why cracking is necessary, in terms of the balance between supply and demand for different fractions. Complete set of Chapter 7 Lectures are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 3.1.1.3 - Electron configuration. Complete set of Chapter 1 Lectures are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 1 - States of Matter. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 1.1 - Understand the three states of matter in terms of the arrangement, movement & energy of the particles. Specification Point 1.2 - Understand the interconversions between the three states of matter in terms of: The names of the interconversions. How they are achieved. The changes in arrangement, movement & energy of the particles. Complete set of Chapter 1 Worksheets are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 8 - The Periodic Table. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 1.18 - Understand how elements are arranged in the periodic table. Specification Point 1.19 - Understand how to deduce the electronic configurations of the first 20 elements from their positions in the periodic table. Specification Point 1.20 - Understand how to use electrical conductivity and the acid-base character of oxides to classify elements as metals or non-metals. Specification Point 1.21 - Identify an element as a metal or a non-metal according to its position in the periodic table. Specification Point 1.22 - Understand how the electronic configuration of a main group element is related to its position in the periodic table. Specification Point 1.23 - Understand why elements in the same group of the periodic table have similar chemical properties. Specification Point 1.24 - Understand why the noble gases (Group 0) do not readily react. Complete set of Chapter 2 Worksheets are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 3.1 - Know that chemical reactions in which heat energy is given out are described as exothermic, and those in which heat energy is taken in are described as endothermic. Specification Point 3.2 - Describe simple calorimetry experiments for reactions such as combustion, displacement, dissolving and neutralisation. Specification Point 3.3 - Calculate the heat energy change from a measured temperature change using the expression Q = mcΔT. Specification Point 3.4 - Calculate the molar enthalpy change (ΔH) from the heat energy change, Q. Specification Point 3.8 - Practical: investigate temperature changes accompanying some of the following types of change: salts dissolving in water, neutralisation reactions, displacement reactions and combustion reactions. Complete set of Chapter 6 Lectures are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 13 - Covalent Bonding. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 1.44 - Know that a covalent bond is formed between atoms by the sharing of a pair of electrons. Specification Point 1.45 - Understand covalent bonds in terms of electrostatic attractions. Specification Point 1.46 - Understand how to use dot-and-cross diagrams to represent covalent bonds in a variety of molecules. Specification Point 1.47 - Explain why substances with a simple molecular structures are gases or liquids, or solids with low melting and boiling points. Specification Point 1.48 - Explain why the melting and boiling points of substances with simple molecular structures increase, in general, with increasing relative molecular mass. Specification Point 1.49 - Explain why substances with giant covalent structures are solids with high melting and boiling points. Specification Point 1.50 - Explain how the structures of diamond, graphite and fullerene influence their physical properties, including electrical conductivity and hardness. Specification Point 1.51 - Know that covalent compounds do not usually conduct electricity. Complete set of Chapter 3 Worksheets are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 38 - Condensation Polymers. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 4.48C - Know that condensation polymerisation, in which a dicarboxylic acid reacts with a diol, produces a polyester and water. Specification Point 4.49C - Understand how to write the structural and displayed formula of a polyester, showing the repeat unit, given the formulae of the monomers from which it is formed including the reaction of ethanedioic acid and ethanediol. Specification Point 4.50C - Know that some polyesters, known as biopolyesters, are biodegradable. Complete set of Chapter 7 Worksheets are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 6 - Paper Chromatography. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 1.11 - Understand how a chromatogram provides information about the composition of a mixture. Specification Point 1.12 - Understand how to use the calculation of Rf values to identify the components of a mixture. Specification Point 1.13 - Practical: understand how a chromatogram provides information about the composition of a mixture. Complete set of Chapter 1 Worksheets are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 3.1 - Know that chemical reactions in which heat energy is given out are described as exothermic, and those in which heat energy is taken in are described as endothermic. Specification Point 3.2 - Describe simple calorimetry experiments for reactions such as combustion, displacement, dissolving and neutralisation. Specification Point 3.3 - Calculate the heat energy change from a measured temperature change using the expression Q = mcΔT. Specification Point 3.4 - Calculate the molar enthalpy change (ΔH) from the heat energy change, Q. Specification Point 3.8 - Practical: investigate temperature changes accompanying some of the following types of change: salts dissolving in water, neutralisation reactions, displacement reactions and combustion reactions. Complete set of Chapter 6 Lessons are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 22 - Titrations. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 2.33C - Describe how to carry out an acid-alkali titration. Complete set of Chapter 5 Worksheets are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 31 - Organic Compounds. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 4.1 - Know that a hydrocarbon is a compound of hydrogen and carbon only. Specification Point 4.2 - Understand how to represent organic molecules using empirical formulae, molecular formulae, general formulae, structural formulae and displayed formulae. Specification Point 4.3 - Know what is meant by the terms homologous series, functional group and isomerism. Specification Point 4.4 - Understand how to name compounds relevant to this specification using the rules of IUPAC nomenclature. Specification Point 4.5 - Understand how to write the possible structural and displayed formulae of an organic molecule given its molecular formula. Specification Point 4.6 - Understand how to classify reactions of organic compounds as substitution, addition and combustion. Complete set of Chapter 7 Worksheets are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 29 - Reversible Reactions. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 3.17 - Know that some reactions are reversible and this is indicated by the symbol ⇌ in equations. Specification Point 3.18 - Describe reversible reactions such as the dehydration of hydrated copper (II) sulphate and the effect of heat on ammonium chloride. Complete set of Chapter 6 Worksheets are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 33 - Burning Hydrocarbons. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 4.11 - Know that a fuel is a substance that, when burned, releases heat energy. Specification Point 4.12 - Know the possible products of complete and incomplete combustion of hydrocarbons with oxygen in the air. Specification Point 4.13 - Understand why carbon monoxide is poisonous, in terms of its effect on the capacity of blood to transport oxygen. Specification Point 4.14 - Know that, in car engines, the temperature reached is high enough to allow nitrogen and oxygen from air to react, forming oxides of nitrogen. Specification Point 4.14 - Know that, in car engines, the temperature reached is high enough to allow nitrogen and oxygen from air to react, forming oxides of nitrogen. Specification Point 4.15 - Explain how the combustion of some impurities in hydrocarbon fuels results in the formation of sulphur dioxide. Specification Point 4.16 - Understand how sulphur dioxide and oxides of nitrogen contribute to acid rain. Specification Point 4.17 - Describe how long-chain alkanes are converted to alkenes and shorter-chain alkanes by catalytic cracking. Specification Point 4.18 - Explain why cracking is necessary, in terms of the balance between supply and demand for different fractions. Complete set of Chapter 7 Worksheets are available.

Companion PDF worksheet for Edexcel IGCSE Chemistry Lecture 37 - Addition Polymers. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 4.44 - Know that an addition polymer is formed by joining up many small molecules called monomers. Specification Point 4.45 - Understand how to draw the repeat unit of an addition polymer, including polyethene, polypropene, polychloroethene and polytetrafluoroethene. Specification Point 4.46 - Understand how to deduce the structure of a monomer from the repeat unit of an addition polymer and vice versa. Specification Point 4.47 - Explain problems in the disposal of addition polymers. Complete set of Chapter 7 Worksheets are available.