We understand the importance of education. We offer tailored private tuition designed to maximise success at GCSE, A Level and beyond. Our tutors are experienced professionals, teachers and top-tier graduates with extensive knowledge in their subjects.
On Tes we offer high quality board-specific resources. Please check back regularly as we are continually updating our stock.
We understand the importance of education. We offer tailored private tuition designed to maximise success at GCSE, A Level and beyond. Our tutors are experienced professionals, teachers and top-tier graduates with extensive knowledge in their subjects.
On Tes we offer high quality board-specific resources. Please check back regularly as we are continually updating our stock.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.48C - Know that condensation polymerisation, in which a dicarboxylic acid reacts with a diol, produces a polyester and water.
Specification Point 4.49C - Understand how to write the structural and displayed formula of a polyester, showing the repeat unit, given the formulae of the monomers from which it is formed including the reaction of ethanedioic acid and ethanediol.
Specification Point 4.50C - Know that some polyesters, known as biopolyesters, are biodegradable.
Complete set of Chapter 7 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.44 - Know that an addition polymer is formed by joining up many small molecules called monomers.
Specification Point 4.45 - Understand how to draw the repeat unit of an addition polymer, including polyethene, polypropene, polychloroethene and polytetrafluoroethene.
Specification Point 4.46 - Understand how to deduce the structure of a monomer from the repeat unit of an addition polymer and vice versa.
Specification Point 4.47 - Explain problems in the disposal of addition polymers.
Complete set of Chapter 7 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.38C - Know that esters contain the functional group -COO-.
Specification Point 4.39C - Know that ethyl ethanoate is the ester produced when ethanol and ethanoic acid react in the presence of an acid catalyst.
Specification Point 4.40C - Understand how to write the structural and displayed formulae of ethyl ethanoate.
Specification Point 4.41C - Understand how to write the structural and displayed formulae of an ester, given the name or formula of the alcohol and carboxylic acid from which it is formed and vice versa.
Specification Point 4.42C - Know that esters are volatile compounds with distinctive smells and are used as food flavourings and in perfumes.
Specification Point 4.43C - Practical: prepare a sample of an ester such as ethyl ethanoate.
Complete set of Chapter 7 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.29C - Know that alcohols contain the functional group −OH.
Specification Point 4.30C - Understand how to draw structural and displayed formulae for methanol, ethanol, propanol and butanol and name each compound.
Specification Point 4.31C - Know that how ethanol can be oxidised.
Specification Point 4.32C - Know how ethanol can be manufactured.
Specification Point 4.33C - Understand the reasons for fermentation, in the absence of air, and at an optimum temperature.
Specification Point 4.34C - Know that carboxylic acids contain the functional group -COOH.
Specification Point 4.35C - Understand how to draw structural and displayed formulae for unbranched-chain carboxylic acids with up to four carbon atoms in the molecule, and name each compound.
Specification Point 4.36C - Describe the reactions of aqueous solutions of carboxylic acids with metals and metal carbonates.
Specification Point 4.37C - Know that vinegar is an aqueous solution containing ethanoic acid.
Complete set of Chapter 7 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 2.9 - Know the approximate percentages by volume of the four most abundant gases in dry air.
Specification Point 2.10 - Understand how to determine the percentage by volume of oxygen in air using experiments involving the reactions of metals and non-metals with air.
Specification Point 2.11 - Describe the combustion of elements in oxygen, including magnesium, hydrogen and sulphur.
Specification Point 2.12 - Describe the formation of carbon dioxide from the thermal decomposition of metal carbonates, including copper (II) carbonate.
Specification Point 2.13 - Know that carbon dioxide is a greenhouse gas and that increasing amounts in the atmosphere may contribute to climate change.
Specification Point 2.14 - Practical: determine the approximate percentage by volume of oxygen in air using a metal or a non-metal.
Complete set of Chapter 4 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.19 - Know the general formula for alkanes.
Specification Point 4.20 - Explain why alkanes are classified as saturated hydrocarbons.
Specification Point 4.21 - Understand how to draw the structural and displayed formulae for alkanes with up to five carbon atoms in the molecule, and to name the unbranched-chain isomers.
Specification Point 4.22 - Describe the reactions of alkanes with halogens in the presence of ultraviolet radiation, limited to mono-substitution.
Specification Point 4.23 - Know that alkenes contain a particular functional group (C=C).
Specification Point 4.24 - Know the general formula for alkenes.
Specification Point 4.25 - Explain why alkenes are classified as unsaturated hydrocarbons.
Specification Point 4.26 - Understand how to draw the structural and displayed formulae for alkenes with up to four carbon atoms in the molecule, and name the unbranched-chain isomers.
Specification Point 4.27 -Describe the reactions of alkenes with bromine to produce dibromoalkanes.
Specification Point 4.28 - Describe how bromine water can be used to distinguish between an alkane and an alkene.
Complete set of Chapter 7 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.7 - Know that crude oil is a mixture of hydrocarbons.
Specification Point 4.8 - Describe how the industrial process of fractional distillation separates crude oil into fractions.
Specification Point 4.9 - Know the names and uses of the main fractions obtained from crude oil.
Specification Point 4.10 - Know the trend in colour, boiling point and viscosity of the main fractions.
Complete set of Chapter 7 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.1 - Know that a hydrocarbon is a compound of hydrogen and carbon only.
Specification Point 4.2 - Understand how to represent organic molecules using empirical formulae, molecular formulae, general formulae, structural formulae and displayed formulae.
Specification Point 4.3 - Know what is meant by the terms homologous series, functional group and isomerism.
Specification Point 4.4 - Understand how to name compounds relevant to this specification using the rules of IUPAC nomenclature.
Specification Point 4.5 - Understand how to write the possible structural and displayed formulae of an organic molecule given its molecular formula.
Specification Point 4.6 - Understand how to classify reactions of organic compounds as substitution, addition and combustion.
Complete set of Chapter 7 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 3.19C - Know that a reversible reaction can reach dynamic equilibrium in a sealed container.
Specification Point 3.20C - Know that at dynamic equilibrium the forward and reverse reactions occur at the same rate and the concentrations of reactants and products remain constant.
Specification Point 3.21C - Understand why a catalyst does not affect the position of equilibrium in a reversible reaction.
Specification Point 3.22C - Know the effect of changing either temperature or pressure on the position of equilibrium in a reversible reaction.
Complete set of Chapter 6 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 3.17 - Know that some reactions are reversible and this is indicated by the symbol ⇌ in equations.
Specification Point 3.18 - Describe reversible reactions such as the dehydration of hydrated copper (II) sulphate and the effect of heat on ammonium chloride.
Complete set of Chapter 6 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 3.5C - Draw and explain energy level diagrams to represent exothermic and endothermic reactions.
Specification Point 3.6C - Know that bond-breaking is an endothermic process and that bond-making is an exothermic process.
Specification Point 3.7C - Use bond energies to calculate the enthalpy change during a chemical reaction.
Complete set of Chapter 6 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 3.9 - Describe experiments to investigate the effects of changes in surface area of a solid, concentration of a solution, temperature and the use of a catalyst on the rate of a reaction.
Specification Point 3.10 - Describe the effects of changes in surface area of a solid, concentration of a solution, pressure of a gas, temperature and the use of a catalyst on the rate of a reaction.
Specification Point 3.11 - Explain the effects of changes in surface area of a solid, concentration of a solution, pressure of a gas and temperature on the rate of a reaction in terms of particle collision theory.
Specification Point 3.12 - Know that a catalyst is a substance that increases the rate of a reaction, but is chemically unchanged at the end of the reaction.
Specification Point 3.13 - Know that a catalyst works by providing an alternative pathway with lower activation energy.
Specification Point 3.15 - Practical: investigate the effect of changing the surface area of marble chips and of changing the concentration of hydrochloric acid on the rate of reaction between marble chips and dilute hydrochloric acid.
Specification Point 3.16 - Practical: investigate the effect of different solids on the catalytic decomposition of hydrogen peroxide solution.
Complete set of Chapter 6 Lectures are available.
Complete set of concise, modern presentations for Edexcel IGCSE Chemistry (4CH1) Chapter 5 - Acids, Bases and Salts. Contains colour coded specification points. Five presentations included:
21 - Acids and Alkalis
22 - Titrations
23 - Acids, Bases and Salts
24 - Making Salts
25 - Chemical Tests
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 2.44 - Describe tests for these gases: hydrogen, oxygen, carbon dioxide, ammonia and chlorine.
Specification Point 2.45 - Describe how to carry out a flame test.
Specification Point 2.46 - Know the colours formed in flame tests for the following cations: lithium, sodium, potassium, calcium and copper.
Specification Point 2.47 - Describe tests for these cations: ammonium using sodium hydroxide solution and identifying the gas evolved. Copper, iron (II) and iron (III) using sodium hydroxide solution.
Specification Point 2.48 - Describe tests for these anions: chloride, bromide and iodide using acidified silver nitrate solution. Sulphates using acidified barium chloride solution and carbonates using hydrochloric acid and identifying the gas evolved.
Specification Point 2.49 - Describe a test for the presence of water using anhydrous copper (II) sulphate.
Specification Point 2.50 - Describe a physical test to show whether a sample of water is pure.
Complete set of Chapter 5 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 2.40C - Describe an experiment to prepare a pure, dry sample of a soluble salt, starting from an acid and alkali.
Specification Point 2.41C - Describe an experiment to prepare a pure, dry sample of an insoluble salt, starting from 2 soluble reactants.
Specification Point 2.43C - Practical: prepare a sample of pure, dry lead (II) sulphate.
Complete set of Chapter 5 Lectures are available.
Huge bundle of resources. First half of the Edexcel IGCSE Chemistry course covered in full.
Complete set of concise, modern presentations for Edexcel IGCSE Chemistry (4CH1) Chapter 1 - Particles and Mixtures, Chapter 2 - Atoms and Molecules, Chapter 3 - Bonding and Chapter 4 - Metals, Halogens and Atmospheric Gases. Contains colour coded specification points with handmade vector graphics. 20 presentations included:
1 - States of Matter
2 - Solutions and Solubility
3 - Calculating Solubility
4 - Elements, Compounds and Mixtures
5 - Methods of Separation
6 - Paper Chromatography
7 - Atoms and Molecules
8 - The Periodic Table
9 - Formulae and Calculations
10 - Formulae and Calculations Part 2
11 - Concentrations and Volumes
12 - Ionic Bonding
13 - Covalent Bonding
14 - Metallic Bonding
15 - Electrolysis
16 - Group 1 Elements
17 - Group 7 Elements
18 - Atmospheric Gases
19 - Metals and the Reactivity Series
20 - The Uses of Metals