KS3 Scheme of work and lessons for Unit 7J Physics - Forces (year 7) Aimed for High ability Year 7 but can be adapted for low/middle ability if required 7Ka: Forces Lesson 1- Forces introduction (Types and non/contact) Lesson 2 - Forces Part 2 (Force meter, arrow size/length and mass vs weight) 7Kb Spring (Hooke's Law) Lesson 3 - Hooke's Law Theory and practical (stretching a spring and plotting a graph) Lesson 4 - Hooke's Law Evaulation and Calculations (concluding/evaluating the practical and calculations) 7Kc Friction and Draw Lesson 5 -Friction lesson Lesson 6 - Friction BONUS LESSON practical (with practical mats diferentiated) - what material is best worn down a slide 7Kd Pressure Lesson 7 - Pressure (What is pressure and calculations) 7Ke Balanced and Unbalanced forces Lesson 8 - Balanced and unbalanced forces (including resultant force) 8 lessons including practicals Targeted towards specification All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

Edexcel CC5 Ionic bonding for the new 9-1 GCSE Edexcel CC6 Covalent bonding for the new 9-1 GCSE Edexcel CC7 Types of substance for the new 9-1 GCSE TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 Covering on the Mat: CC5a Ionic bonds CC5b Ionic lattices CC5c Properties of ionic compounds CC6a Covalent bonding CC7a Molecular compounds CC7b Allotropes of Carbon CC7c Properties of metals CC7d Bonding models For more detail for each lesson - see individual lesson upload All extension questions available on each slide Answers all underneath each slide Support also available where necessary All powerpoints have: - Summary questions - Independent learning Some powerpoints have: - Practical's - Group activities - AfL -Activate learning -Demonstrate learning All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!!

KS3 Scheme of work and lessons for Unit 7J Physics - Electricity (year 7) UPDATED 30th MAY 2017 Aimed for High ability Year 7 but can be adapted for low/middle ability if required 7Ja: Current Lesson 1- Current and electric circuit introduction to symbols Lesson 2 - Insulators and conductors 7Jb Models for circuits included in 7Jc and 7Jd 7Jc Series and Parallel Lesson 3 -Series circuits (bulbs, cells, current in series) Lesson 4 - Parallel circuits (bulbs, cells, current in parallel) 7Jd Voltage and resistance Lesson 5 - Voltage (in series and parallel) Lesson 6 - Resistance (including variable resistors and Ohms Law) 7Je Using Electricity Lesson 7 - Using electricity (including wiring a plug, explaining fuses and domestic main circuits) 7 lessons including practicals Targeted towards specification All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

KS3 Unit 7G Chemistry - Particle Theory Aimed for Higher/middle/lower abilty - all slides are labelled and no work is required for differentiation 7Gb: Particle Theory Lesson 1- Particles To recall the term particle To describe the properties of solids, liquids and gases To use the particle model to explain other observations about matter Lesson 2 - Particles EXTRA LESSON To explain what happens to particles as a substance changes state. To be able to understand what happens when ice melts To be able to complete an APP independently 7Gc Brownian Motion Lesson 3 - Brownian Motion To describe the Brownian motion To be able to state where Brownian motion can be observed and explain how it occurs using particle theory To explain why different units are needed for measuring very small or very large objects 7Gd Diffusion Lesson 4 - Diffusion To describe the term diffusion To be able to explain the speed of diffusion To be able to carry out calculations to work out the speed of diffusion 7Ge Air Pressure Lesson 5 - Air pressure To describe how moving gas particles cause pressure To explain the ways gas pressure can be increased To be able to explain some effects of air pressure 5 lessons including practicals Targeted towards specification All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

CAN BE USED FOR ABOUT 8 LESSONS OVER 187 SLIDES ACTIVATE - SHOWING THE FORMULA AND HOW IT WORKS DEMONSTRATE - ALLOWING STUDENTS TO COMPLETE THE QUESTIONS AFL - CHECKING ANSWERS (ALL ANSWERS PRESENT) Edexcel CC9 PART 1-3 Calculations involving masses for the new 9-1 GCSE 6-8 lessons depending on how good student are at the calculations Mainly covering TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 TOPIC 5 SEPARATE SCIENCE PAPER 1: QUANTITATIVE ANALYSIS Touching on TOPIC 7 Bond energy calculations for the higher tier students Powerpoint with over 187 slides including worked examples, questions for the students to complete and then the answers of the questions. Some calculations include more than one method, to help stretch the brightest and support the lowest ability students. There is a summary slide for each paper (Paper 1 and Paper 2- separate science/ triple science) and a calculations summary slide to show all the equations that students will need to know over the 2 separate science papers. QUESTIONS ATTACHED TO ALLOW STUDENTS TO WORK INDEPENDENTLY OR AT THEIR OWN PACE (THEY ARE THE SAME QUESTIONS AS IN THE POWERPOINT - SO ALL ANSWERS ARE IN THE POWERPOINT) Can set as homework or use in a revision lesson. Calculations include: COMBINED SCIENCE… Rf Value Isotope Calculation (H) Relative Formula Mass Empirical from molecular Molecular Formula from Empirical Formula and Mr Empirical Formula from Reacting masses and % composition Conservation of Mass Reacting masses (without moles) Concentration (g/dm3) Moles (H) Using Avogadro’s constant to calculate the number of atoms or molecules (H) Reacting masses (with moles) (H) Finding the Limiting Reagent (H) Using the limiting reagent to calculate the mass (H) Balancing equations (with moles) (H) Bond Enthalpy (H) SEPARATE SCIENCE … Percentage yield Reacting Masses and percentage yield Atom Economy Concentration (moldm-3) Concentration – converting between moldm-3 and gdm-3 Titration equations Molar volume of gases – with volume and masses Please leave feedback

KS3 Scheme of work and lessons for Unit 7E Chemistry Aimed for BOTH HIGH AND LOW ABILITY (SLIDES TELL WHICH IS WHICH) 7Ea Mixtures: Lesson 1- Solid, liquid and gases To recall the three states of matter To be able to explain the properties of the three states of matter To consolidate learning Lesson 2 - Separating mixtures To understand the difference between elements, compounds and mixtures To understand the term colloid To be able to explain how different separating methods work 7Eb Solution: Lesson 3 - Solutions To understand the terms solute, solvent and solution To be able to explain what happens to the mass in a physical change To understand the term “saturated solution” Lesson 4 - Dissolving To understand the term solubility To be able to plan and complete an experiment To consolidate and explain how factors affect how much of a substance dissolves 7Ec Evaporation: Lesson 5 - Evaporation To know what happens during evaporating To be able state what happens at a material’s boiling point To be able to identify how different mixtures should be separated 7Ed Chromatography: Lesson 6 - Chromatography To know the term ‘chromatography’ and give examples of where it is used To be able to explain how chromatography works To understand how to evaluate the information provided by chromatograms 7Ee Distillation: Lesson 7 - Distillation To know what distillation is To be able to explain how distillation works and carry out a simple experiment To give examples of where distillation is used 7 lessons including practicals and homework All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Homework attached SEE THE INDIVIDUAL LESSONS FOR MAIN TOPICS Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

KS3 Scheme of work and lessons for Unit 7I Physics - Energy UPDATED 30th MAY 2017 Aimed for High ability but can be adapted for low/middle ability if required 7Ia Energy from food: Lesson 1-2- Energy from food 7Ib Energy transfers and stored: Lesson 3 - 4 - Energy transfers and stores 7Ic Fuels: Lesson 5-6 - Fuels, types and power station 7Id Other Energy resources: Lesson 7-8- Renewable, fuel cells and advantages and disadvantages 4 lessons including practicals and homework (could be split into 8 lessons) All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Homework attached SEE THE INDIVIDUAL LESSONS FOR MAIN TOPICS Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

KS3 Unit 7L Physics - Sounds and Waves Aimed for High-Middle ability Year 7 but can be adapted for low/middle ability if required (Higher and lower slides) Further to this the lessons can also be split into two for each section - but due to time constraints and a very high ability class I was able to get through it all in 6 lessons rather than 8 lessons Lesson 7Lb: Moving sounds and Lesson 7Le: Comparing waves (it was better suited this taught together) Lesson 1-Particles, Medium and Sounds Lesson 2 - Waves Lesson 3 - Types of Waves Lesson 7Lc: Detecting sounds Lesson 4 - Hearing (the ear) Lesson 5 - Sound and protecting hearing Lesson 7Ld: Using sounds Lesson 6 - Using sounds (echo, sonar, echolocations) 6 lessons including practicals (can be split to 8 if required) Targeted towards specification Videos can be found on you tube but I have attached them just in case they are required All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Uses Plus, minus and Interesting, SOLO learning, Collective memory, AfL techniques, Mini quizzes, homework slides, practice 6 mark questions, videos Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

KS3 Unit 8K Physics - Energy and Paying for energy Aimed for High-Middle ability Year 8 but can be adapted for low/middle ability if required (Higher and lower slides) Further to this the lessons can also be split into two for each section - but due to time constraints and a very high ability class I was able to get through it all in 6 lessons rather than 8 lessons Lesson 8Kb: Transferring energy Lesson 1-Conduction Lesson 2 - Convection and radiation Lesson 8Kc: Controlling transfers Lesson 3 - Controlling transfer (in the home, insulation) Lesson 8Kd: Power and efficiency Lesson 4 - Power and work in J Lesson 5 - Sankey diagrams Lesson 8Ke: Paying for energy Lesson 6 - Paying for electricity (cost of electricity and energy in kWh) 6 lessons including practicals (can be split to 8 if required) Targeted towards specification Videos can be found on you tube but I have attached them just in case they are required All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Uses Plus, minus and Interesting, SOLO learning, Collective memory, AfL techniques, Mini quizzes, homework slides, practice 6 mark questions, videos TECH SHEETS ALSO INCLUDED Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

Edexcel CC9 PART 1-3 Calculations involving masses for the new 9-1 GCSE 8 lessons NO moles TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 Learning objectives: For all learning objectives see individual lesson uploads (they would not fit on her) All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Main topics include: Please see individual uploads for each lesson All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS

AQA AS Level Unit 1 Section 4 Energetics -Hess’s Law, Bond enthalpy, Enthalpy Change, Endothermic, Exothermic Using the specification and books No exam questions are included due to copy right Including: Homework booklets Assessment sheets Interactive powerpoints (rarely seen in A-level) RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE Unit 1 Section 4: 3.1.4 Energetics# 3.1.4.1 Enthalpy change Endothermic and Exothermic Reaction Basics LESSON 1: Objectives: To know the reactions can be exothermic or endothermic To know what an enthalpy change is To define standard enthalpies or formation and combustion Unit 1 Section 4: 3.1.4 Energetics 3.1.4.2 Calorimetry Measuring Enthalpy Change LESSON 2: Objectives: To define specific heat capacity To describe how you measure enthalpy changes more accurately To calculate the enthalpy of a reaction LESSON 3: Objectives: PRACTICAL CHOICES To investigate the enthalpies change of a neutralisation reaction and allow for heat loss. To investigate the enthalpies change of a displacement reaction and allow for heat loss. To investigate the enthalpies change of a combustion reaction and allow for heat loss. Unit 1 Section 4: 3.1.4 Energetics 3.1.4.3 Applications of Hess’s law LESSON 4: Enthalpy of Formation Objectives: To understand the term Hess’s Law To construct simple energy cycles To carry out calculations using the enthalpy of formation LESSON 5: Enthalpy of Combustion To recall all definitions To carry out calculation using enthalpy of combustion To consolidate learning with exam style questions Unit 1 Section 4: 3.1.4 Energetics 3.1.4.3 Applications of Hess’s law – REQUIRED PRACTICAL 2 LESSON 6: Required Practical To understand what method to research To determine an enthalpy change which cannot be measured directly. To calculate the enthalpy change of the reaction Unit 1 Section 4: 3.1.4 Energetics 3.1.4.4 Bond enthalpies LESSON 7: Bond Enthalpy To understand the term mean bond enthalpy To use the mean bond enthalpies to calculate approximate values for ∆H for reactions To consolidate with exam questions Homework booklet with answers Leave feedback and enjoy !!

AQA A2 Level Unit 4 Section 21 Acids, Bases and Buffers Using the specification and books No exam questions are included due to copy right TOTAL OF 13 lessons - including required practical 9 Including: Homework booklets Assessment sheets Interactive powerpoints (rarely seen in A-level) RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE REQUIRE CHEMSHEET access for most TASK questions Unit 4 Section 21: 3.1.12 Acid, bases and buffers Prior knowledge: AS Chemistry 3.1.6 – Chemical equilibria, Le Châtelier’s principle and Kc https://www.tes.com/teaching-resource/aqa-as-level-unit-1-section-6-7-equilibria-redox-chemical-equilibria-le-chatelier-s-principle-oxidation-states-oxidation-reduction-ionic-and-kc-12099917 and Kp https://www.tes.com/teaching-resource/aqa-a2-level-unit-4-physical-chemistry-complete-lessons-kp-and-le-chateliers-12357544 LESSON 1: Bronsted Lowry Acids and Bases LESSON 2: pH of strong acids LESSON 3: pH of strong bases LESSON 4 + 5: Weak acids and bases LESSON 6: pH curves LESSON 7: Indicators LESSON 8: SKetching pH curves LESSON 9 + 10: Titration calculations LESSON 11 + 12: Buffers and calculations LESSON 13: Required practical 9 Homework booklet with answers Leave feedback and enjoy !!

4.4.1 Reactivity of metals 4.4.1.1 Metal oxides 4.4.1.2 The reactivity series 4.4.1.3 Extraction of metals and reduction 4.4.1.4 Oxidation and reduction in terms of electrons (HT only) Content split over 11 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1-3 Reactivity series PLUS PRACTICALS L1: To recall the properties of metals To explain the reactivity series of metals and deduce the relative reactivity of some metals by their reactions with water To consolidate learning L2: To carry out a practical to investigate the reaction of metals with dilute acids To create a summary table To consolidate learning L3: To write word equations for the reactions with acid, water and steam To write symbol equations for the reactions with acid, water and steam To consolidate learning with questions Lesson 4+5 Displacement L4:To understand what a displacement reaction is To be able to predict whether a displacement reaction will take place To be able to write the word and symbol equations for displacement reactions L5: To complete a practical to observe some common displacement reactions To write equations for the successful reactions To consolidate learning with questions Lesson 6+7 RedOx PLUS PRACTICALS To understand the terms oxidation and reduction in terms of oxygen To be able to recall the extraction of metals and what this means in terms of oxidation and reduction To explain the position of a metal in the reactivity series relative to its resistance to corrosion Lesson 8 Ores To recall where metals are extracted from To be able to explain the method of extraction relating to its position in the reactivity series To consolidate learning with questions Lesson 9 Ores 2 To discuss the impacts of extracting metals To identify if there is a link between date of discovery and reactivity To consolidate learning with questions Lesson 10 Ores practicals and questions To reduce metals by carbon To consolidate the practical To consolidate learning with questions Lesson 11: Ionic and 1/2 equations (REDOX identified) To recall the key terms required to understand redox reactions To be able to separate aqueous compounds into ions in order to write ionic equations To be able to write balanced ionic equations To identify the species that has been reduced /oxidised

4.4.3 Electrolysis 4.4.3.1 The process of electrolysis 4.4.3.2 Electrolysis of molten ionic compounds 4.4.3.3 Using electrolysis to extract metals 4.4.3.4 Electrolysis of aqueous solutions Required practical 3: investigate what happens when aqueous solutions are electrolysed using inert electrodes. This should be an investigation involving developing a hypothesis. 4.4.3.5 Representation of reactions at electrodes as half equations (HT only) Content split over 12 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Electrolysis the basics To recall the properties of ionic compounds from year 9 To understand the terms electrolysis, electrolytes, anode, cathode and electrodes To explain the movement of ions during electrolysis Lesson 2 + 3 Molten PLUS DEMONSTRATION AND HT 1/2 equations To explain OILRIG in terms of electrodes To watch the demonstration of the electrolysis of lead bromide To explain how to predict the products of electrolysis of molten ionic solids with half equations (HT) Lesson 4: Extracting metals (Aluminium) To recall how metals are extracted from ores To explain how aluminium is manufactured To write half equations Lesson 5 + 6: Aqueous PLUS HT 1/2 equations To recall the preferential discharge of ions To explain how to predict the products of electrolysis of aqueous solutions To consolidate learning Lesson 7, 8 and 9: PRACTICALS and HT 1/2 equations To devise a hypothesis about the products that will be formed at the electrodes To complete a practical To consolidate learning Lesson 10: Electrolysis of Water To observe the electrolysis of water To explain the electrolysis of water To consolidate learning by reviewing the practical completed on aqueous solutions Lesson 11: Copper To investigate the change in mass of the anode and of the cathode, when copper sulfate solution is electrolysed between copper electrodes To explain how this process can be used to purify copper To explain the reactions taking place at the copper electrodes (H) Lesson 12: RUSTING To explain how experimental results can be used to show the conditions necessary for rusting To explain in detail how to prevent iron from rusting To consolidate using questions

4.9 Chemistry of the atmosphere 4.9.1 The composition and evolution of the Earth’s atmosphere 4.9.1.1 The proportions of different gases in the atmosphere 4.9.1.2 The Earth’s early atmosphere 4.9.1.3 How oxygen increased 4.9.1.4 How carbon dioxide decreased 4.9.2 Carbon dioxide and methane as greenhouse gases 4.9.2.1 Greenhouse gases 4.9.2.2 Human activities which contribute to an increase in greenhouse gases in the atmosphere 4.9.2.3 Global climate change 4.9.2.4 The carbon footprint and its reduction 4.9.3 Common atmospheric pollutants and their sources 4.9.3.1 Atmospheric pollutants from fuels 4.9.3.2 Properties and effects of atmospheric pollutants Lesson 1: Early atmosphere Objectives: To interpret the evidence available for the composition of the Earth’s early atmosphere To be able to describe the Earths’ early atmosphere To explain how oceans formed Lesson 2: Changing atmosphere Objectives: To explain how the amount of carbon dioxide in the atmosphere was decreased To be able to how life evolved To consolidate with questions Lesson 3: Today’s atmosphere Objectives: To know the compositions of the gases in the atmosphere To complete practical’s to investigate this To consolidate with questions Lesson 4: Greenhouse gases Objectives: To know the names of the greenhouse gases To be able to describe how the greenhouse effect is caused To consolidate with questions Lesson 5: Enhanced greenhouse effect Objectives: To understand the enhanced greenhouse effect To be able to interpret graphs that show climate change To consolidate learning with questions Lesson 6: CLimate change Objectives: To understand what human activities may influence the climate To be able to explain the problems that climate change may cause To consolidate learning with questions Lesson 7: Carbon footprint Objectives: To understand the term carbon footprint To explain how to reduce the personal carbon footprint To explain how the government intend to reduce the carbon footprint Lesson 8: Combustion Objectives: To explain what happens during complete combustion of a hydrocarbon To explain what happens during incomplete combustion of a hydrocarbon To consolidate learning with questions Lesson 9 + 10: Combustion practicals Objectives: To watch a series of demonstrations To answer questions based on the practicals To consolidate learning with questions Lesson 11: Pollutants Objectives: To explain why hydrocarbon fuels release sulfur dioxide when they are used To describe the problems caused by acid rain To be able to explain why oxides of nitrogen are produced by engines

NEW for SEPTEMBER 2017 Year 10 Mock 2017 or just revision for the following: Edexcel CC1 States of matter Edexcel CC2 Separating techniques Edexcel CC3 Atomic structure Edexcel CC4 The periodic table Edexcel CC5 Ionic bonding Edexcel CC6 Covalent bonding Edexcel CC7 Types of bonding Edexcel CC9 Masses .....for the new 9-1 GCSE A series of revision session using: - A series of powerpoints (Lesson 1-4 and 6-8) - Revision mats (bonding, masses and atoms) - Whiteboard lessons What is included: - Powerpoints (Lesson 1-4 and 6-8) - Past paper - NOT WITH BUNDLE (Can be found on edexcel website for free - due to copy right I am not allowed to upload it) (Lesson 5) - PLEASE NOTE: no powerpoints for masses only revision mats (there is too much content for condensed lesson and I have found it works best with revision mats - students can work at their own pace) (Lesson 9) - Powerpoint for MOLES (Lesson 10) The information IS condensed and NOT all spec has been added in due to time constraints in our mid-term plan; however the main topics are covered. All directed at the revision for the Year 10 mock (2016) As follows: Lesson 1: State of matter and melting points CC1/Method of separation/CC2- Rock salt/ Method of separation/CC2- Drinking water (L7)- powerpoint Lesson 2: Method of separation/CC2- Chromatography - CORE P (L4) - powerpoint Lesson 3: Method of separation/CC2 - Distillation - CORE P (L5/6)- powerpoint Lesson 4: Atomic structure CC3 - Atomic structure/mass/PEN (L7/8) Atomic structure CC3 - Isotopes (L9/10)- powerpoint Lesson 5: Past paper - NOT WITH BUNDLE (Can be found on edexcel website for free) Lesson 6: Types of bonding CC5 - Ionic/properties (L15-17)- powerpoint Lesson 7: Types of bonding CC6 - Covalent/properties (L18-19)- powerpoint Lesson 8: Types of substance CC7 - Allotropes/metals/polymers (L20-22) - powerpoint Lesson 9: Masses CC9 - revision mats without moles Lesson 10: Moles CC9 - powerpoint Revision mats: Masses, atoms and bonding All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!! Please leave a comment and rate

CRACKING NOW ADDED - SORRY! ALL PREVIOUS BUYERS SHOULD NOW BE ABLE TO DOWNLOAD IT! Edexcel 9-1 TOPIC 8 CC16a Hydrocarbons in crude oil and natural gas PAPER 2 Edexcel 9-1 TOPIC 8 CC16b Fractional distillation of crude oil PAPER 2 Edexcel 9-1 TOPIC 8 CC16c The alkane homologous series PAPER 2 Edexcel 9-1 TOPIC 8 CC16d Complete and incomplete combustion PAPER 2 Edexcel 9-1 TOPIC 8 CC16e Breaking down hydrocarbons CRACKING PAPER 2 Edexcel 9-1 TOPIC 8 CC16e Alternative fuels - using hydrogen as a fuel PAPER 2 TOPIC 8 Fuels and Earth science PAPER 2- NEW for SEPTEMBER 2017 CC16a Hydrocarbons in crude oil and natural gas L1 Crude oil To understand the term ‘hydrocarbon’ To explain why crude oil is useful To explain why crude oil is a finite resource and non-renewable L2 Fractional distillation or lower ability L2 and L3 Fractional distillation To understand how crude oil is separated into useful fractions To be able to explain the differences between each fraction To explain a use for each fraction INFO See separate upload for what you will need L3 Alkane + EXTRA Alkane plenary quiz To know the term alkane To understand how the formula differs in the alkane series To describe the trends found in an homologous series of compounds L4 Complete and incomplete combustion To explain what happens during complete combustion of a hydrocarbon To explain what happens during incomplete combustion of a hydrocarbon To describe the problems associated with incomplete combustion L5 Pollution To explain why hydrocarbon fuels release sulfur dioxide when they are used To describe the problems caused by acid rain To be able to explain why oxides of nitrogen are produced by engines L6 Cracking To know the term alkene To explain why cracking is needed To explain what is happening during the cracking of oil fractions L7 Alternative fuels To recall facts about petrol, kerosene and diesel oil To evaluate the advantages and disadvantages of using hydrogen as a fuel in cars To consolidate the topic with questions All extension questions available on each slide Answers all underneath each slide Support also available where necessary All powerpoints have: - Summary questions - Independent learning Some powerpoints have: - Practical's - Group activities - AfL -Activate learning -Demonstrate learning All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!!

TOPIC 7 Rates of reaction PAPER 2- NEW for SEPTEMBER 2017 CC14a Rates of reaction CC14b Factors affecting reaction rates CC14b CORE PRACTICAL - investigating reacting rates (rates changing surface area and temperature) CC14c Catalysts and activation energy CC15a Exothermic and endothermic reactions CC15b Energy changes in reactions L1 Rates of reaction L2 Collision Theory L3 Concentration L4 Surface area CORE PRACTICAL L5 Graph skills CORE PRACTICAL L6 Temperature CORE PRACTICAL L7 Catalysts L8 Energy changes L9 MEXican BEN L10 Bond Energy calculations (H) L11 Revision rates of reaction more detail for each lesson - see individual lesson upload All extension questions available on each slide Answers all underneath each slide Support also available where necessary Some powerpoints have: - Practical's - Group activities - AfL -Activate learning -Demonstrate learning All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!!

This is a revision powerpoint with OVER 1100 slides in - intended for students to use as electronic flashcards. It covers: TOPIC 1 KEY CONCEPTS - ATOMS, IONIC BONDING, COVALENT BONDING AND CALCULATIONS TOPIC 2 STATES OF MATTER STATES SEPARATING MIXTURES TOPIC 3 CHEMICAL CHANGES - ACIDS + ELECTROLYSIS TOPIC 4 EXTRACTING METALS + DYNAMIC EQUILIBRIUM TOPIC 6 GROUPS OF THE PERIODIC TABLE TOPIC 7 ENERGY ENERGY + CHANGES RATES TOPIC 8 FUELS/EARTH FUELS EARTH SCIENCE CORE PRACTICALS DEFINITIONS- throughout the course FORMULAS - throughout the course It consists of powerpoint with menu options / click through buttons that covers all of the basics for the CHEMISTRY part of the GCSE Combined Science course PLEASE FEEDBACK Thanks