This lesson has been written to act as a revision tool for students at the completion of topic P1 of the CIE IGCSE Combined Science specification or in the lead up to mock or terminal exams. This motion topic is extensive and the engaging PowerPoint and accompanying resources have been designed to include a wide range of activities that will allow the students to assess their understanding of the core and supplement sections and to recognise any areas which need further attention. This specification is fairly heavy in mathematical content and so a lot of opportunities are presented for a range of skills to be tested and the PowerPoint guides students through the application of these requirements such as rearranging the formula and converting between units. The following specification points have received a particular focus in this lesson: Calculate average speed using total distance and total time Plot and interpret a speed-time graph Recognise different motions on a speed time graph and relate this to the resultant force Calculate acceleration and distance travelled from a speed-time graph Distinguish between mass and weight Recall and use the equation W = mg to calculate the weight Recall and use the equation to calculate density Interpret extension-load graphs and calculate the spring constant Recognise the significance of the term, “limit of proportionality” Recall and use the equation to calculate pressure A number of quick quiz rounds, such as FILL THE VOID and THE BIG REVEAL, are used to maintain engagement and motivation and to challenge the students on their recall of important points. It is estimated that it will take in excess of 2 hours of IGCSE teaching time to cover the detail included in this lesson

This is a fully-resourced lesson which uses exam-style questions, engaging quiz competitions, quick tasks and discussion points to challenge students on their understanding of the content of topics P1 & P8 - P15, that will assessed on PAPER 6. It has been specifically designed for students on the Edexcel GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to cover as many specification points as possible but the following sub-topics have been given particular attention: The 13 recall and apply equations tested in PAPER 6 Electrical components and symbols Setting up an ammeter and voltmeter in a circuit Current and potential difference in a series circuit The change in resistance in a LDR, diode, thermistor and filament bulb Mains domestic supply in the UK Plugs and fuses as safety devices Contact and non-contact forces Attraction and repulsion in magnets Magnetic fields Changes of state as physical changes The extension of a spring In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. A revision quiz, consisting of 10 rounds, runs over the course of the lesson and a score sheet is included with the resources to maintain motivation and engagement. Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3 teaching hours to complete the tasks and therefore this can be used at different points throughout the course as well as acting as a final revision before the PAPER 6 exam.

This is a fully-resourced lesson which uses exam-style questions, quiz competitions, quick tasks and discussion points to challenge students on their understanding of topics P1 - P4, that will assessed on PAPER 5. It has been specifically designed for students on the AQA GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to cover as many specification points as possible but the following sub-topics have received particular attention: The size of an atom The differences between isotopes Using the half-life in calculations The 13 recall and apply equations in topics P1 - P4 Electrical circuit symbols Measuring current using an ammeter Current and potential difference in series and parallel circuits Changes in resistance in resistors Mains domestic supply Kinetic, internal and potential energy in a system Calculating specific heat capacity and latent heat Physical and chemical changes Conservation of energy Calculating gravitational potential and kinetic energy Penetrating abilities of the different types of radiation In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been written into the lesson to walk students through some of the more difficult concepts such as circuit calculations and rearranging formulae and converting between units. Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3 or 4 teaching hours to complete the tasks and therefore this can be used at different points throughout the course as well as acting as a final revision before the PAPER 5 exam.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic 5 (Atomic Physics) of the CIE IGCSE Physics specification The sub-topics and specification points (from both the core and supplement sections), that are tested within this revision lesson include: Atomic model Nucleus Detection of radioactivity Characteristics of the three kinds of emission Radioactive decay Half-life Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual exams

A concise lesson presentation that focuses on the key details that students need to know about diodes for the GCSE examinations. The lesson begins by introducing the idea that diodes only allow current to flow in one direction. Moving forwards, time is taken to go through the potential difference vs current graph in 3 parts so that students can explain how the diode functions. Moving forwards, students will meet a LED and then in the style commonly associated with the 6 mark exam question, they are challenged to use data in a table to compare the effectiveness of a LED against other light bulbs.

This engaging revision lesson uses a range of tasks to allow students to check their understanding of radioactive decay and nuclear radiation. The PowerPoint and accompanying resources have been designed to challenge the detail of point 4.2 of the AQA GCSE physics and combined science specifications and the following sub-topics are covered: Properties of alpha, beta and gamma Bq as the unit of radioactivity Detecting sources of radiation based on their penetrating power Half-life Decay equations Changes to the mass and charge of the nucleus after decay

This detailed and engaging lesson has been written to challenge the students on their recall and application of the 30 equations which they have to know for the CIE IGCSE Physics exams. The lesson is designed to not only check that they know these equations but also on their ability to rearrange formulae when required and to convert between units. The main task of the lesson consists of 15 exam-style questions which challenge 17 of these recall equations and then an engaging quiz competition and class discussions are used to identify the other 13. Students are guided throughout the lesson in the use of the mathematical skills and are shown examples to aid their progress. The detail of this lesson means that it can be used at numerous times throughout the duration of the IGCSE course to check on their progress with the equations. This lesson has been designed to tie in with the other 5 uploaded revision lessons which cover the content of the 5 topics on the specification

This lesson covers a large number of the key topics from the AQA GCSE Combined Physics course in the final weeks before the GCSE examinations. The extensive PowerPoint and accompanying resources use a range of activities and tasks including exam questions and quizzes to challenge the students on their knowledge of the following topics and skills: Units and converting between units Answering calculation questions (with 1 or 2 equations) Newton’s 2nd and 3rd laws of motion Resultant forces Conservation of energy Efficiency and reducing wasted energy Conservation of momentum Scalar and vector quantities Motions on a velocity-time graph The relationship between force and the extension of a spring Setting up electrical circuits Current, potential difference and resistance in series and parallel circuits The properties of ionising radiation Calculating half-lives Constructing decay equations The properties of waves Refraction This resource is likely to take 4 or more lessons to cover all of the content.

An engaging lesson presentation that runs the lesson in a quiz format, with numerous rounds, in order to introduce the students to the different stages of the life cycle of a star. The lesson begins by introducing students to the first three stages (nebula, protostar, main sequence) which all stars go through regardless of their mass. Key details about each stage are discussed and considered. Moving forwards, this lesson ensures that students understand that the stages after the main sequence are dependent upon the mass of the star. Key links are made to associated topics such as nuclear fusion. This lesson has been designed for GCSE students but could be used with KS3 students if they are doing a project on space and stars

This detailed and engaging lesson has been written to challenge the students on their recall and application of the 21 equations which they have to know for the Pearson Edexcel IGCSE Physics exams. The lesson is designed to not only check that they know these equations but also on their ability to rearrange formulae when required and to convert between units. The main task of the lesson consists of 12 exam-style questions which challenge 14 of these recall equations and then an engaging quiz competition and class discussions are used to identify the other 7. Students are guided throughout the lesson in the use of the mathematical skills and are shown examples to aid their progress. This lesson has been designed to tie in with the other 8 uploaded revision lessons which cover the content of the 8 topics on the specification.

This is a detailed REVISION lesson that contains an engaging powerpoint (99 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic 8 (Global challenges) of the OCR GCSE Physics A specification. The following specification points are covered in this lesson: Explain the factors which affect the distance required for road transport vehicles to come to rest in emergencies and the implications for safety Estimate how the distances required for road vehicles to stop in an emergency, varies over a range of typical speeds Estimate the forces involved in typical situations on a public road Describe the main energy sources available for use on Earth, compare the ways in which they are used and distinguish between renewable and non-renewable sources Explain patterns and trends in the use of energy resources Recall that step-up and step-down transformers are used to change the potential difference as power is transferred from power stations Link the potential differences and numbers of turns of a transformer to the power transfer involved; relate this to the advantages of power transmission at high voltages Recall that the domestic supply in the UK is a.c. at 50Hz and about 230 volts Recall the differences in function between the live, neutral and earth mains wires, and the potential differences between these wires Explain the red-shift of light as seen from galaxies which are receding (qualitative only). The change with distance of each galaxy’s speed is evidence of an expanding universe Explain how red shift and other evidence can be linked to the Big-Bang model Recall that our Sun was formed from dust and gas drawn together by gravity and explain how this caused fusion reactions, leading to equilibrium between gravitational collapse and expansion due to the energy released during fusion Recall the main features of our solar system, including the similarities and distinctions between the planets and their moons Due to the size of this revision lesson, it is likely to be used over the course of a number of lessons and can also be used throughout the duration of the GCSE course, as an end of topic revision lesson or as lessons in the lead up to mocks or the actual GCSE exams

This is a fully-resourced revision lesson which contains a wide range of activities to allow students to assess their understanding of the content in topic 2.3 (Work and energy) of the WJEC GCSE Physics specification. The engaging and detailed PowerPoint and accompanying differentiated resources use exam-style questions, tasks, discussion points and quick quiz competitions to check on the following specification points: The equation W= Fd The understanding that work is a measure of energy transfer The fact that an object can possess energy due to its motion, position and deformation Application of the equations for kinetic energy and changes in gravitational potential energy Application of the conservation of energy Understand the relationship between force and extension for a spring Application of the equation to calculate spring constant Using the force-extension graph to calculate the work done in stretching Improving the energy efficiency of vehicles

This revision lesson challenges students to explain the results of an osmosis investigation and to calculate accelerations using 2 equations. The PowerPoint and accompanying resources have been designed to check on the understanding of these two topics as detailed in the AQA GCSE biology, physics and combined specifications. The lesson contains a range of tasks including worked examples, exam questions and quizzes which will remind students that water molecules move across partially permeable membranes by osmosis and how changes in the mass of a potato can be used to compare water concentrations in the potato and solution. Students will also recall that acceleration can be calculated from velocity-time graphs using change in velocity/time as well as through the use of F=ma.

This revision lesson focuses on the properties of waves and the process of refraction as detailed in topic 6 of the AQA physics and combined specifications. Each task in the PowerPoint and accompanying resources challenges the students on their understanding of the key terms frequency, period, wavelength, amplitude, transverse and longitudinal, and reminds them how to answer refraction questions by using explanations that involve density, speed and the change in direction of the light wave.

An engaging lesson presentation (41 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P1 (Energy) of the AQA GCSE Combined Science specification (specification unit P6.1). The topics that are tested within the lesson include: Energy stores and systems Changes in energy Efficiency Students will be engaged through the numerous activities including quiz rounds like “ERRORS with the equation calculations” whilst crucially being able to recognise those areas which need further attention

An engaging lesson presentation (55 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within module P3 (Electricity and Magnetism) of the OCR Gateway A GCSE Combined Science specification. The topics that are tested within the lesson include: Static electricity Current and potential difference Series and parallel circuits Magnets and magnetic fields Motors Students will be engaged through the numerous activities including quiz rounds like “Take the HOTSEAT” whilst crucially being able to recognise those areas which need further attention

This fully-resourced revision lesson consists of an engaging PowerPoint and differentiated resources which together challenge the students on their knowledge of the Key concepts in Physics, which are detailed in topic 1 of the Pearson Edexcel GCSE Physics specification . The content in this topic is particularly important because it will be assessed in both paper 1 and paper 2 of the terminal exams. The lesson has been filled with a wide range of activities which test the following specification points: Recall and use the SI units for physical quantities Recall and use multiples and sub-multiples of units Be able to convert between different units Use significant figures and standard form# To fall in line with the heavy mathematical content of this specification, the main task of the lesson challenges the students to carry out a range of calculations where they have to convert between units and leave their answers in a specific form.

This is a fully-resourced REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 7 (Magnetism and electromagnetism) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Poles of a magnet Electromagnetism Fleming’s left hand rule Electric motors Loudspeakers Transformers Of all of the Physics topics, this one tends to be one of the least well understood. Therefore, time has been taken to not only make this an engaging revision lesson but to go into detail on some of the topics which are commonly assessed in the exams. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This revision lesson contains a wide range of activities that will challenge the students on their knowledge and understanding of the content detailed in topic 3 (Conservation of energy) of the Pearson Edexcel GCSE Physics specification. These activities include exam style questions which will allow the students to assess their progress against the clearly explained answer. There is also a quiz that runs throughout the course of the lesson and this has been designed to maintain engagement and motivation. The following specification points have been covered in this lesson: Recall and use the equation to calculate the gravitational potential energy Recall and use the equation to calculate the kinetic energy Explain what is meant by the conservation of energy Explain that mechanical transfers become wasteful when energy is dissipated to the surroundings Explain ways of reducing unwanted energy transfers Recall and use the equation to calculate efficiency Describe the main energy sources available for use on Earth and explain their patterns and trends in the use of energy resources

This fully-resourced REVISION lesson has been written to challenge the students on their knowledge of the content of topic 6 (Magnetism and electromagnetism) of the Pearson Edexcel IGCSE Physics specification. The engaging PowerPoint and accompanying resources will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Magnets attract and repel other magnets and attract magnetic materials Magnetism is induced in some materials when they are placed in a magnetic field The construction of an electromagnet Use of the left-hand rule to predict the direction of the resulting force in a motor How the motor effect is applied in a loudspeaker The structure and function of a transformer Know and use the relationship between input and output voltages and the turns ratio Know and use the relationship between input and output power for 100% efficient transformer Explain the use of a step-up transformer in the transmission of electrical energy Quiz rounds such as “THE BIG REVEAL” and “WHAT EXACTLY AM I” are used to test the students on their knowledge of key terms and structures and all of the tasks are differentiated to allow students of differing abilities to access the work