A concise lesson presentation (26 slides) that looks at how sexual reproduction leads to variation and considers the advantages and disadvantages of this form of reproduction. The lesson begins by getting the students to recognise that sexual reproduction needs two parents and therefore two gametes. Time is taken to ensure that students understand that these gametes are produced by meiosis and therefore contain the haploid number of chromosomes. Key terminology like haploid and zygote are used throughout the lesson. This lesson is suitable for both KS3 and GCSE students

This lesson has been designed to act as an introduction to the anatomy of the kidney before students move on to study each structure of the nephron in more detail. The lesson considers both the gross anatomy, in terms of the renal cortex and medulla and then looks at the functional unit of the nephron. The function of the different parts of the nephron are briefly discussed and the features that relate to function are considered. This lesson has been designed for A-level students but could be used with higher ability GCSE students.

This revision resource has been designed to include a range of activities that will engage the students whilst they assess their understanding of the content of topic B8 (Gas exchange and respiration) of the CIE IGCSE Combined Science specification for examination in June and November 2020 and 2021. Exam questions, quick tasks and quiz competitions such as “The BIG REVEAL” will challenge the students on their recall of the content as well as their ability to apply this knowledge. The lesson was written to cover as much of the content as possible, but the following topics have received particular attention: The role of cilia, goblet cells and mucus in the trachea and bronchi The effects of the chemicals in tobacco smoke on gas exchange Efficient gas exchange at the alveoli The composition of inhaled and exhaled air Aerobic respiration as the chemical reaction that releases energy The uses of energy in the human body This resource contains an engaging PowerPoint (54 slides) and associated worksheets and is ideal for use at the end of this topic or in the lead up to mocks or the actual terminal exams

Water is very important for living organisms because of its numerous properties and this lesson focuses on its role as a solvent in transport. The engaging and detailed PowerPoint and accompanying worksheet have been designed to cover point 1.2 of the Pearson Edexcel A-level Biology A specification and also explains the importance of the dipole nature for this role in transport. A mathematical theme runs throughout the lesson as students have to match the numbers calculated in the starter task to water statistics, such as the percentage of the volume of blood plasma that is water. This has been included to try to increase the relevance of each property so that it can be described in a biological context. Time is taken at the beginning of the lesson to describe the structure of water in terms of the covalent bonds between the oxygen and hydrogen atoms as well as the hydrogen bonds which form between molecules because of its polarity. Students will understand how water is a solvent which means that it is critical for transport in animals, a topic covered in the next few lessons but also for transport in plants as discussed in topic 4. The high heat capacity and latent heat of vaporisation of water is also discussed and explained through the examples of thermoregulation and the maintenance of a stable environment for aquatic animals. The final part of the lesson focuses on the involvement of water in condensation and hydrolysis reactions, two reactions which must be well understood for topic 1 and 2 and the formation and breakage of polysaccharides, lipids, polypeptides and polynucleotides.

This fully-resourced lesson uses the lac operon as an example to describe how gene expression is regulated and controls cell processes and structures. The detailed PowerPoint and accompanying resources have been designed to cover the details of specification point 3.12 of the Pearson Edexcel A-level Biology A course. This is one of the more difficult concepts in this A-level course and therefore key points are reiterated throughout this lesson to increase the likelihood of student understanding and to support them when trying to make links to actual biological examples in living organisms. There is a clear connection to transcription and translation as covered in topic 2, so the lesson begins by reminding students that in addition to the structural gene in a transcription unit, there is the promotor region where RNA polymerase binds. Students are introduced to the idea of transcription factors and will understand how these molecules can activate or repress transcription by enabling or preventing the binding of the enzyme. At this point, students are challenged on their current understanding with a series of questions about DELLA proteins so they can see how these molecules prevent the binding of RNA polymerase. The main section of the lesson focuses on the lac operon. Students will be able to visualise the different structures that are found in this unit of DNA and time is taken to go through the individual functions. A step by step guide is used to walk students through the sequence of events that occur when lactose is absent and when it is present before they are challenged to apply their understanding to an exam question. The final section of the lesson looks at one further example with oestrogen and the ER receptor.

This lesson describes how molecular evidence can be used to reveal similarities between closely-related organisms. The PowerPoint and accompanying resources have been primarily designed to cover point 17.3 (b) of the CIE A-level Biology specification and focus on the comparison of protein structure and mitochondrial DNA but can also be used as a revision of related topics that include protein synthesis and gene mutations. The lesson begins with the introduction of convergent evolution, a process where organisms independently evolve to have similar features due to theeir habitation of similar environments. This allows the importance of molecular evidence to be considered to ensure that organisms which are closely related (in terms of evolution) are recognised. The comparison of the primary structure of a protein involved in respiration (cytochrome c) is used to demonstrate how protein sequence data can be useful. At this point, a series of exam-style questions are used to challenge the students on their knowledge of protein synthesis and gene mutations from topics 6 and 16. The remainder of the lesson considers the use of mitochondrial DNA and a study of the mtDNA genomes of 51 gibbons demonstrates how this can provide evidence of relationships, even in organisms that show high taxonomic diversity like these lesser apes.

This detailed lesson outlines the characteristics features of the kingdoms Protoctista, Fungi, Plantae and Animalia. The engaging PowerPoint and accompanying resources have been designed to cover point 18.2 [c] of the CIE International A-level Biology specification which states that students should be able to describe the features of these four eukaryotic kingdoms. This lesson begins with a knowledge recall as students have to recognise that prior to 1990, kingdom was the highest taxa in the classification hierarchy. Moving forwards, they will recall the names of the five kingdoms and immediately be challenged to split them so that the prokaryotae kingdom is left on its own. The features of this kingdom are given so that the lesson can focus on the four eukaryotic kingdoms. Students are constantly challenged on their understanding of the current topic as well as that of earlier topics, as demonstrated by a differentiated task about the structure and function of cellulose which was covered in topic 2. This task is found in the section of the lesson where the main constituent of the wall can be used to distinguish between plantae, fungi and prokaryotae. Quick quiz competitions, such as SAY WHAT YOU SEE are used to introduce key terms in a fun and memorable way. The final part of the lesson looks at the protoctista kingdom and students will come to understand how these organisms tend to share a lot of animal or plant-like features.

This lesson describes the key events that occur during interphase, mitosis and cytokinesis in the eukaryotic cell cycle. The PowerPoint and accompanying resources have been designed to cover point 5.1 [c] of the CIE A-level Biology specification and challenges the students on their knowledge of chromosomes from an earlier lesson as well as preparing them for upcoming lessons on the main stages of mitosis and its significance in life cycles The students were introduced to the cell cycle at GCSE so this lesson has been planned to build on that knowledge and to emphasise that the M phase which includes mitosis (nuclear division) only occupies a small part of the cycle. The students will learn that interphase is the main stage and that this is split into three phases, G1, S and G2. A range of tasks which include exam-style questions, guided discussion points and quick quiz competitions are used to introduce key terms and values and to describe the main processes that occur in a very specific order. There is also a focus on the checkpoints, such as the restriction point that occurs before the S phase to ensure that the cell is ready for DNA replication. Extra time is taken to ensure that key terminology is included and understood, such as sister chromatid and centromere, and this focus helps to show how it is possible for genetically identical daughter cells to be formed at the end of the cycle. Important details of mitosis are introduced so students are ready for the next lesson, before the differences in cytokinesis in animal and plant cells are described.

This fully-resourced lesson describes the inheritance of genes that are carried on the X chromosome and includes a particular focus on haemophilia in humans. The detailed PowerPoint and associated differentiated resources have been designed to cover specification point 8.2 (v) as detailed in the Edexcel A-level Biology B specification. Key genetic terminology is used throughout and the lesson begins with a check on their ability to identify the definition of homologous chromosomes. Students will recall that the sex chromosomes are not fully homologous and that the smaller Y chromosome lacks some of the genes that are found on the X. This leads into one of the numerous discussion points, where students are encouraged to consider whether females or males are more likely to suffer from sex-linked diseases and they will be challenged to find evidence to support this decision later in the lesson. In terms of humans, the lesson focuses on haemophilia and red-green colour blindness and a step-by-step guide is used to demonstrate how these specific genetic diagrams should be constructed and how the phenotypes should then be interpreted. The final tasks of the lesson challenge the students to carry out a dihybrid cross that involves a sex-linked disease and an autosomal disease before applying their knowledge to a question about chickens and how the rate of feather production in chicks can be used to determine gender. All of the tasks are differentiated so that students of differing abilities can access the work and all exam questions have fully-explained, visual markschemes to allow them to assess their progress and address any misconceptions

This lesson covers the biological classification of a species, taxonomic hierarchy and the binomial system of naming species. The engaging PowerPoint and accompanying resources have been designed to cover points 4.2.2 (a) & (b) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply an understanding of these three topics. The lesson begins by looking at the meaning of the term population in Biology so that the term species can be introduced. A hinny, which is the hybrid offspring of a horse and a donkey, is used to explain how these two organisms must be members of different species because they are unable to produce fertile offspring. Moving forwards, students will learn that species is the lowest taxon in the modern-day classification hierarchy. The first of a number of rounds of a competition is used to engage the students whilst they learn the names of the 7 other taxa and the horse and the donkey from the earlier example are used to complete the hierarchy. Students will understand that the binomial naming system was introduced by Carl Linnaeus to provide a universal name for each species and they will be challenged to apply their knowledge by completing a hierarchy for a modern-day human, by spotting the correct name for an unfamiliar organism and finally by suggesting advantages of this system.

This fully-resourced lesson describes how the mechanism of natural selection results in changes in a population that are known as adaptations. The PowerPoint and accompanying resources have been designed to cover specification points 4.2.2 (g), (h) and (i) as detailed in the OCR A-level Biology A specification and also considers how antibiotic resistance has implications for human populations. President Trump’s error ridden speech about antibiotics is used at the beginning of the lesson to remind students that this is a treatment for bacterial infections and not viruses as he stated. Moving forwards, 2 quick quiz competitions are used to introduce MRSA and then to get the students to recognise that they can use this abbreviation as a reminder to use mutation, reproduce, selection (and survive) and allele in their descriptions of evolution through natural selection. The main task of the lesson challenges the students to form a description that explains how this strain of bacteria developed resistance to methicillin to enable them to see the principles of natural selection. This can then be used when describing how the anatomy of the modern-day giraffe has evolved over time. The concept of convergent evolution is introduced and links are made to the need for modern classification techniques which was considered in the previous sub-module. Moving forwards, students will understand how natural selection leads to adaptations and a quick quiz competition introduces the different types of adaptation and a series of tasks are used to ensure that the students can distinguish between anatomical, behavioural and physiological adaptations. The Marram grass is used to test their understanding further, before a step by step guide describes how the lignified cells prevent a loss of turgidity. Moving forwards, the students are challenged to explain how the other adaptations of this grass help it to survive in its environment. A series of exam-style questions on the Mangrove family will challenge them to make links to other topics such as osmosis and the mark schemes are displayed to allow them to assess their understanding. The final part of the lesson focuses on the adaptations of the anteater and again current understanding of this topic is tested alongside prior knowledge of classification hierarchy. Due to the extensiveness of this lesson and the detail contained within the resources, it is estimated that it will take in excess of 2/3 hours of allocated A-level teaching time to deliver this lesson.

This fully-resourced lesson will prepare students for the range of mathematical-based questions that they may face on Paper 2 & 4. It is specificallly designed for students who have studied the Extended subject content (Core & Supplement) as detailed on the CIE IGCSE Chemistry specification. The lesson contains a wide range of activities which includes 8 quiz competition rounds spread across the duration of the lesson to maintain engagement whilst the students assess their understanding. The mathematical skills covered in this lesson include: Calculating the number of sub-atomic particles in atoms and ions Writing chemical formulae for ionic compounds Identifying isotopes Using Avogadro’s constant to calculate the number of particles Calculating the relative formula mass Calculating amount in moles using the mass and the relative formula mass Balancing chemical symbol equations Calculating reacting masses Gas calculations using molar volume Calculating concentration of solutions Titration calculations Deducing the empirical formula Calculating energy changes in reactions Most of the resources have been differentiated two ways to allow students of differing abilities to access the work whilst still being challenged. In addition, step by step guides are used to demonstrate how to carry out some of the more difficult calculations such as the harder mole calculations and calculating masses in reactions. Due to the extensiveness of this lesson, it is estimated that it will take in excess of 3 teaching hours to complete all of the tasks and questions

This lesson has been written to act as a revision tool for students at the completion of topic P1 of the CIE IGCSE Combined Science specification or in the lead up to mock or terminal exams. This motion topic is extensive and the engaging PowerPoint and accompanying resources have been designed to include a wide range of activities that will allow the students to assess their understanding of the core and supplement sections and to recognise any areas which need further attention. This specification is fairly heavy in mathematical content and so a lot of opportunities are presented for a range of skills to be tested and the PowerPoint guides students through the application of these requirements such as rearranging the formula and converting between units. The following specification points have received a particular focus in this lesson: Calculate average speed using total distance and total time Plot and interpret a speed-time graph Recognise different motions on a speed time graph and relate this to the resultant force Calculate acceleration and distance travelled from a speed-time graph Distinguish between mass and weight Recall and use the equation W = mg to calculate the weight Recall and use the equation to calculate density Interpret extension-load graphs and calculate the spring constant Recognise the significance of the term, “limit of proportionality” Recall and use the equation to calculate pressure A number of quick quiz rounds, such as FILL THE VOID and THE BIG REVEAL, are used to maintain engagement and motivation and to challenge the students on their recall of important points. It is estimated that it will take in excess of 2 hours of IGCSE teaching time to cover the detail included in this lesson

This detailed lesson explores how a range of methods are used to produce fragments of DNA as part of the recombinant DNA technology process. Both the engaging PowerPoint and accompanying resources have been written to cover the first part of point 8.4.1 of the AQA A-level Biology specification and also provides information that will prove useful for the other lessons in this sub-topic on the polymerase chain reaction and using transformed host cells. The lesson begins with a definition of recombinant DNA technology so that students can begin to understand how this process involves the transfer of DNA fragments from one species to another. Links are made to the genetic code and transcription and translation mechanisms, which were met in topic 4, in order to explain how the transferred gene can be translated in the transgenic organism. Moving forwards, the method involving reverse transcriptase and DNA polymerase is introduced and their knowledge of the structure of the polynucleotides and the roles of enzymes is challenged through questions and discussion points. Restriction enzymes are then introduced and time is taken to look at the structure of a restriction site as well as the production of sticky ends due to the staggered cut on the DNA. A series of exam-style questions with displayed mark schemes are used to allow the students to assess their current understanding. The final part of the lesson looks at the production of synthetic genes of any sequence using gene machines and a series of application questions are used to push the students to consider how this advance in technology could be utilised. As well as understanding and prior knowledge checks, quick quiz competitions are used throughout the lesson to introduce key terms such as cDNA and EcoR1 in a memorable way.

This lesson describes how energy is transferred between trophic levels using the terms net and gross primary productivity and calculates the efficiency of this transfer. The PowerPoint and accompanying resources have been designed to cover points 10.2 (i) and (ii) of the Edexcel A-level Biology B specification and the content of the lesson also accounts for the loss of energy between different levels and describes the farming practices that act to reduce these losses. Due to the fact that the productivity of plants is dependent on photosynthesis, a series of exam-style questions have been written into the lesson which challenge the students to explain how the structure of the leaf as well as the light-dependent and light-independent reactions are linked to GPP. All of the exam questions have mark schemes that are included in the PowerPoint to allow students to immediately assess their understanding. A number of quick quiz competitions as well as guided discussion points are used to introduce the formulae that calculate NPP and N and to recognise the meaning of the components. Once again, this is immediately followed with an opportunity to apply their understanding to selected questions and the students will have to calculate the efficiency of energy transfer. The remainder of the lesson focuses on the ways that energy is lost at each trophic level and the biology behind the following farming practices are discussed: raising herbivores to reduce the number of trophic levels in a food chain intensely rearing animals to reduce respiratory losses in human food chains the use of fungicides, insecticides and herbicides the addition of artificial fertilisers The ethical issues raised by these practices are also considered and alternative methods discussed such as the addition of natural predators and the use of organic fertilisers like manure

This lesson describes the relationship between the structure and function of the giant covalent substances, graphite and diamond. The PowerPoint and accompanying resource have been designed to cover points 1.35, 1.36 and 1.37 of the Edexcel GCSE Chemistry specification also covers those same points in the Chemistry section of the Combined Science course As shown in the picture, the lesson begins with a newspaper story about two prisoners who escaped from Pentonville prison by using a diamond-tipped drill and this immediately introduces the use of this allotrope of carbon in cutting tools. There is a clear focus on the link between the structure, bonding and respective uses. Time is taken to focus on the comparison between graphite and diamond in terms of their ability to conduct electricity. A step by step answer is used to explain why diamond cannot conduct electricity so that students can use this when forming their answer for graphite.

This is a fully-resourced REVISION lesson which challenges the students on their knowledge of the content in TOPIC B4 (Natural selection and genetic modification) of the Edexcel GCSE Combined Science specification. The lesson uses an engaging PowerPoint (65 slides) and accompanying worksheets to motivate students whilst they assess their understanding of this topic. A range of exam questions, differentiated tasks and quiz competitions are used to test the following sub-topics: The discovery of key fossils and their implications for human evolution The dating of stone tools Evolution by natural selection Antibiotic resistance in bacteria as evidence for natural selection The domain and kingdom classification methods Genetic engineering of bacteria to produce human insulin The benefits and risks of genetic engineering and selective breeding The mathematical element of the course is also tested throughout the lesson and students are given helpful hints on exam techniques and how to structure answers. This resource is suitable for use at the end of topic B4 or in the lead up to mocks or the actual GCSE exams.

This detailed and engaging lesson has been written to challenge the students on their recall and application of the 22 equations which they have to know for the AQA GCSE Physics exams. The lesson is designed to not only check that they know these equations but also on their ability to rearrange formulae when required and to convert between units. The main task of the lesson consists of 13 exam-style questions which challenge 12 of these recall equations and then an engaging quiz competition and class discussions are used to identify the other 10. Students are guided throughout the lesson in the use of the mathematical skills and are shown examples to aid their progress. This lesson has been designed to tie in with the other 12 uploaded revision lessons which cover the content of the topics on the Edexcel GCSE Physics specification

This fully-resourced revision lesson has been designed to motivate and engage the students whilst they assess their understanding of the content detailed in topics 12 & 13 (Magnetism and the motor effect and electromagnetic induction) of the Pearson Edexcel GCSE Physics specification. These two topics tend to be poorly understood so time has been taken to plan activities that challenge the key details of the specification and provide clear explanations so students can progress. The PowerPoint and accompanying resources were written to cover as much of the content in both topics as possible, but the following points have received particular attention: Attraction and repulsion between unlike and like poles respectively Electromagnetic induction The application of Fleming’s left-hand rule Application of the equation involving magnetic flux density Microphones and loudspeakers and the opposite conversions of a changing current to sound waves The ability of transformers to change the size of alternating voltage The advantage of power transmission in high voltage cables The application of the transformer equations involving potential difference and turns and for transformers with 100% efficiency Due to the heavy mathematical element of the specification, the required skills are tested throughout the lesson and guidance is given to allow differing abilities to access the work

This lesson describes the effects of gene mutations can have on amino acid sequences, as illustrated by sickle cell anaemia. The engaging and detailed PowerPoint and accompanying resources are part of the first lesson in a series of 2 lessons which have been designed to cover point (f) in topic 3 of A2 unit 4 of the WJEC A-level Biology specification and includes substitutions, deletions and insertions In order to understand how a change in the base sequence can affect the order of the amino acids, students must be confident in their understanding and application of protein synthesis which was covered earlier in this topic. Therefore, the start of the lesson focuses on transcription and translation and students are guided through the use of the codon table to identify amino acids. Moving forwards, a task called known as THE WALL is used to introduce to the names of three types of gene mutation whilst challenging the students to recognise three terms which are associated with the genetic code. The main focus of the lesson is substitutions and how these mutations may or may not cause a change to the amino acid sequence. The students are challenged to use their knowledge of the degenerate nature of the genetic code to explain how a silent mutation can result. Students will learn that a substitution is responsible for the new allele that causes sickle cell anaemia and they are tested on their understanding through an exam-style question. As with all of the questions, a mark scheme is included in the PowerPoint which can be displayed to allow the students to assess their understanding. The rest of the lesson looks at base deletions and base insertions and students are introduced to the idea of a frameshift mutation. One particular task challenges the students to evaluate the statement that base deletions have a bigger impact on primary structure than base substitutions. This is a differentiated task and they have to compare the fact that the reading frame is shifted by a deletion against the change in a single base by a substitution