A fully resourced lesson which guides students through writing decay equations to represent alpha and beta decay. This lesson includes a lesson presentation (41 slides) and differentiated worksheets. Time is taken at the beginning of the lesson to ensure that students know the sub-atomic particles that are found in an alpha particle and a beta particle so that they can understand why the atomic and mass numbers are affected during the decay. Moving forwards, a step-by-step guide is used to show students how to write both types of equations. There are regular progress checks throughout the lesson so that students can check their understanding. This lesson has been written for GCSE students (14 - 16 year olds in the UK)

A resourced lesson which looks at gas exchange at the alveoli and focuses on how these structures are adapted to carry out efficient gas exchange. The lesson includes an engaging lesson presentation (21 slides) and an associated worksheet. The lesson begins by revisiting the idea of the surface area to volume ratio of small organisms against larger organisms. This will remind students that due to the low surface area to volume ratio of a human, they need to have adaptations at the exchange surfaces to increase the surface area. Moving forwards, a range of competitions are used to introduce students to the numbers and key terms associated with the alveoli. Students will learn how the large number (700 million) of alveoli leads to a large surface area and how a permeable membrane is also essential. Time is written into the lesson to allow students to think about key features, such as the one cell thick lining, and relate this to the rate of diffusion. The lesson concludes with students completing a passage about how the respiratory and circulatory systems work together to maintain a steep concentration gradient between the alveoli and the capillaries. There are regular progress checks throughout the lesson to allow the students to check on their understanding. As always, the lesson finishes with a slide containing advanced terminology so that students who have aspirations to take A-level Biology can extend and deepen their knowledge

A concise, engaging lesson presentation (22 slides) which looks at the different responses of the body as a result of adrenaline release. In line with the actions of adrenaline, the lesson begins with a range of quiz competitions to introduce key terms and responses to the students. Once the students know that it causes both the breathing and heart rate to increase, they are challenged to complete a passage which brings this information together to explain how the increased respiration rate is related to the fight or flight tag line. Moving forwards, students will be introduced to the meaning of the term vasodilation and then asked to consider which organs will need extra blood flow during times of stress and conversely, which tissues can have blood directed away from them. The lesson finishes by looking at how a negative feedback loop is used as the final control to ensure that energy resources are not wasted during times when there is no stress.

A resourced lesson which looks at a range of methods that are used to increase biodiversity. The lesson includes an engaging lesson presentation (31 slides) and an associated worksheet The lesson begins by getting students to recall the term biodiversity and time is taken to ensure that the meaning of this word is fully understood. The lesson takes the form of a bus ride around London, looking at some of the attractions which act to increase or maintain biodiversity. Students will “virtually” visit both London Zoo and Kew Gardens and will learn how methods such as the captive breeding programme and the Millenium Seed Bank are used to influence biodiversity. Along with the bus ride, students will compete in a number of quiz competitions which act to maintain engagement whilst introducing key terms or facts. There are regular progress checks throughout the lesson to allow the students to check their understanding. This lesson has been designed for GCSE students.

A fully-resourced lesson which looks at the saturated hydrocarbons known as the alkanes and focuses on their structure and reactions. The lesson includes an engaging lesson presentation (38 slides) and an associated worksheet which is differentiated. The lesson begins with the introduction of the name of this group and then a step-by-step guide is used to show students how to draw the displayed formula. Once the first four have been drawn, students are shown how to calculate the general formula for the alkenes and then challenged to do the same for the alkanes. Moving forwards, students will meet the key term, saturated, and time is taken to ensure that the meaning of this word is understood in the context of this lesson. Once they have been introduced to bromine water, students are challenged to work out what will happen when this substance is added to an alkane and they have to explain their answer. The remainder of the lesson looks at the complete and incomplete combustion of the alkanes, focusing on the different products of these reactions and specifically the problems associated with carbon monoxide. There are regular progress checks throughout the lesson to allow the students to check on their understanding.

A resourced lesson which looks at three of the main components of blood and ensures that students can relate their features to their function. The lesson includes an engaging lesson presentation (31 slides) and an associated worksheet The lesson begins by challenging the students to recognise blood from a description of some of its contents. This will enable students to identify some of the substances like hormones and urea that are carried in the plasma. Moving forwards, the rest of the lesson takes a format where the students have to act as recruitment consultants. They have been given 3 job roles to fill and once they have decided on the right candidates for the job, they need to be able to explain why these have been chosen. Students will go study the red and white blood cells and platelets, focusing on how their different specialised features enable them to effectively carry out their respective functions. Students will be able to compare the cells in terms of size, number of nuclei and ultimately explain why they have their features. There are regular progress checks throughout the lesson to allow the students to check on their understanding. This lesson has been designed for GCSE students but is perfectly suitable to be used with KS3 students who are studying the circulatory system

A fully-resourced lesson which looks at the structure of the human heart and its associated vessels and ensures that students know the journey which blood takes through this organ. The lesson includes an engaging lesson presentation (25 slides), a diagram to label and a worksheet to summarise the journey. The lesson begins with a bit of fun as students see the script to part of an episode from Friends. Students will recognise the alternative definition of the heart and ultimately recall that the function of this organ is to pump blood around the body. Moving forwards, the main task of the lesson involves labelling the four chambers and the blood vessels which bring blood towards and away from the heart. Students are given useful hints along the way to enable them to discover the answers rather than simply being given a finished diagram. Time is taken to look at the valves and discuss their function so that students can understand this role when they encounter them in veins. The lesson concludes with one final task that challenges the students to detail the journey of blood through the heart. There are regular progress checks throughout the lesson to allow the students to check on their understanding. As always, the lesson finishes with a slide containing advanced terminology so that students who have aspirations to take A-level Biology can extend and deepen their knowledge

A resourced lesson which guides students through the method of writing word equations for a range of different chemical reactions. The lesson includes an engaging and informative lesson presentation (33 slides) and an associated worksheet containing questions. The lesson begins by reminding students of the form which word equations take, with the reactants chemically changing into the products. Moving forwards, time is taken to show students how to work out the name of a compound that contains either 2 or 3 elements. This moves nicely into the reaction of acids and how to name the salt that is produced. Students are shown the general formula for the reactions of acids with a metal, a metal carbonate and a metal oxide or hydroxide so that they can form word equations for each of these reactions in the progress check task. The final section of the lesson introduces reversible reactions to the students and shows them the symbol that is used in these word equations to replace the arrow. There are regular progress checks throughout the lesson to allow the students to check on their understanding and thorough explanations of the required answers. This lesson has been written for GCSE students but is perfectly suitable for KS3 students too.

A fully-resourced lesson which looks at how decomposers are involved with the process of decay. The lesson includes an engaging and detailed lesson presentation (31 slides) and an associated differentiated worksheets. The lesson begins by displaying the definitions for decomposers and detritivores and challenging students to use their bingo cards to see if they can work out the words which are being described. Students will learn how these two types of organisms work together to break down matter. Moving forwards, a worked example is used to guide students through how to calculate the rate of decay from a range of different data types. Students will be challenged to act like a travel agent for decomposers to come up with the different conditions that they require. Finally, they have to bring all of the new-found knowledge together to answer a range of summary questions. These questions are differentiated two ways so that differing abilities can access the work. There are regular progress checks throughout the lesson to allow the students to check on their understanding. This lesson has been written for GCSE students (14 - 16 year olds in the UK)

A fully-resourced lesson which uses a step-by-step guide to show students how to write fully balanced symbol equations. The lesson includes an engaging lesson presentation (38 slides) and associated worksheets containing questions which iaredifferentiated. The lesson begins by talking the students through the three steps involved in writing a chemical symbol equation. The first step involves writing in the formula for the elements. Students are introduced to the term, diatomic, and shown the 8 molecules that have to be written as a pair of atoms. Moving forwards, students are shown how to write chemical formulae for ionic compounds. They are reminded of how to use the group of the Periodic Table to work out the ion charge and how this is crucial when writing the formula. They are also shown how to write formulae which include brackets which is necessary when the charged molecules are involved. Finally, students are reminded of the rules of balancing symbol equations. There are progress checks at each stage so that students can assess their understanding and any misconceptions can be be addressed immediately. Time is taken to talk about state symbols, in case the exam question requires these to be included in the equation. The final section of the lesson involves students bringing their new-found skills together to write symbol equations for a range of reactions, including a neutralisation and reversible reaction. This task is differentiated so that students who need a little bit of assistance can still access the work. This lesson has been written for GCSE students (14-16 year olds in the UK)

A resourced lesson which looks at the key details of a titration to enable students to generate results which could be used in a titration calculation. The lesson includes an engaging lesson presentation (29 slides) and an associated worksheet. The lesson begins with a spot of fun as students are challenged to read the script of a scene from Friends to identify a neutralisation reaction. Students will learn that a method called a titration can use the results of an acid-base neutralisation to work out the concentration of an unknown. Students will learn the names of the equipment involved through a quiz competition and will then be shown how to set up a table to collect the results. Key terms such as titre, rough and end-point are explained. The lesson finishes with one further round of the competition called “Take the HOTSEAT” so that the knowledge of the key terminology from today’s lesson can be checked. The lesson has been designed with regular progress checks throughout so that students can check their understanding. This lesson has been designed for GCSE students.

An informative lesson presentation (24 slides) that looks at the relative size of the nanoparticles and explains why they are so effective for a range of purposes. The lesson begins by looking at exactly how small nanoparticles are and ensures that students can recognise this size in a range of ways, including standard form. Moving forwards, in order to help students to understand why these nanoparticles are being used in a lot of different ways, students are introduced to bulk materials. Included in the remainder of the lesson is calculating the surface area to volume ratio so this can be used as a comparison point. There are regular progress checks throughout the lesson so that students can assess their understanding. This lesson has been written for GCSE students.

An engaging lesson presentation (46 slides) which looks at the fractional distillation of crude oil and focuses on the properties of the different fractions. The aim at the start of the lesson is to ensure that students understand that this process can be broken down into evaporation followed by condensation. Moving forwards, a fun competition is used to introduce the students to the names of some of the important fractions that are produced by this process. At the same time, they will learn the relative position that each fraction condenses on the fractionating column and will be taught that they need to know this position with relation to the other fractions. Students will learn that the fractions have differing properties depending on where they condense and they are challenged to compare fractions by viscosity, length of hydrocarbon and boiling point. There are regular progress checks throughout the lesson to allow the students to check on their understanding. This lesson has been written for GCSE students.

An engaging and informative lesson presentation (43 slides) that shows students how to write accurate chemical formulae for ionic compounds. In order to write accurate chemical formulae, students need to know the charges of the ions involved. For this reason, the lesson begins by reminding students how they can use the Periodic Table to work out the charge of the charged atoms. Students are shown how they can use these ion charges to write the formula and then are given the opportunity to apply this to a number of examples. Moving forwards, students are shown how some formulae need to contain brackets. The lesson finishes with a competition called “Ye Olde Chemical Formula Shop” where students get points if they are the first to work out the formula of a given substance. This lesson has been written for GCSE students.

A resourced lesson which looks at a number of examples of biological polymers. The lesson includes an engaging lesson presentation (40 slides) and a couple of worksheets to be used in the understanding check task. The starter activity challenges the students to use their Chemistry knowledge to come up with the abbreviation DNA. They will learn the key details of this polynucleotide and then time and focus is given to the nitrogenous bases and how they bond between the two strands. Moving forwards, students will be shown the next biological polymer that is a polypeptide. They are briefly shown how to draw a block diagram to represent the chain of amino acids. The final polymer are carbohydrates and students will learn how glycogen, starch and cellulose are formed from glucose monomers. Regular progress checks are written into the lesson at regular intervals to allow the students to check their understanding and ask questions. This lesson has been written for GCSE students

An engaging lesson presentation (33 slides) which walks students through the main steps in the extraction of iron from its ore. The lesson begins by challenging the students to recall the reactivity series of metals and specifically the position of iron in relation to carbon so they recognise that it can be extracted by reduction with carbon. Key skills from other Chemistry topics are tested during the lesson such as writing chemical formulae and redox reactions. The rest of the lesson involves a step-by-step guide where students are given a passage and a symbol equation with something missing which they have to complete. This task ensures that students recognise the products, formulae and state symbols at each stage. A number of quiz competitions are used during the lesson to maintain engagement and progress checks have been written into the lesson at regular intervals so that students can assess their understanding. This lesson has been written for GCSE students and fits in nicely with other resources that are uploaded (extracting metals and extracting aluminium).

An engaging and practical based lesson presentation (24 slides) which challenges the students to carry out a range of practical tasks to learn the identification tests and positive results for the anions. The lesson begins by challenging the students to use their prior knowledge of chemical formulae to name two sets of ions. Students will be reminded of the definition of a cation so they can use this to write an accurate one for the anions. The rest of the lesson looks at the different tests and time is taken to explain the details behind each of them. Progress checks have been written into the lesson at regular intervals to allow the students to check their understanding. A set homework has also been included. This lesson has been written for GCSE students.

An engaging lesson presentation (70 slides) which covers a range of communicable diseases which are caused by each of the four pathogens and discusses how the spread of these diseases can be prevented. The lesson begins by challenging the students to make the link between communicable diseases and pathogens and ensures that they are comfortable with protoctists as this is a pathogen that a lot of them will not have met or at least known the name for. Moving forwards, a focus is given to each pathogen, looking at why they are so effective at causing disease and also looks at examples of diseases that they cause. A range of quiz competitions are used to introduce key terms and maintain engagement. The remainder of the lesson focuses on how the spread of these communicable diseases can be prevented and attempts are made to link to other topics such as contraception. Progress checks have been written into the lesson at regular intervals so that students can constantly assess their understanding and any misconceptions can be immediately addressed. This lesson has been written for GCSE students (14 - 16 year olds in the UK) but can be used with both younger and older students.

A fully-resourced lesson which looks at the chemical reaction that is aerobic respiration and ensures that students can apply their knowledge to application questions which challenge them to make links to related topics. The lesson includes a practical-based lesson presentation (19 slides) and associated worksheets containing differentiated questions. The aim of the beginning of the lesson involves getting students to understand the term, concentration, so that they are able to use it accurately in their descriptions. This is a term which is commonly wrongly used by students. Moving forwards, students will carry out a practical to collect valid results so that they can apply their knowledge of concentration to explain a trend. Certain practical skills are challenged during the lesson such as the drawing of a results table to display the results. A worksheet containing questions on the practical is differentiated so that students who need assistance are still able to access the learning. This lesson has been designed for GCSE students but can be used with KS3 students who are learning about chemical reactions.

An engaging, practical-based lesson presentation (22 slides), accompanied by a practical worksheet and application questions which together explore how the extension of a spring is related to force according to Hooke’s Law. The lesson begins by introducing the name of the law and looking at the equation which connects the force, extension and spring constant. As spring constant is likely to be a new term to students, time is taken to look at the definition of this key term. Students are given hints throughout the lesson about potential issues to look out for, including the unit of spring constant being N/m when the majority of springs are small enough that their extension will be measured in cm or mm. Moving forwards, students will follow the provided experimental method to carry out the investigation and produce a set of results which can be used to plot the line. The two distinct sections of the line are discussed and the actual words of Hooke’s Law are given and again discussed and considered. The final part of the lesson involves the students being challenged to apply their knowledge of the law to a range of application questions and assessing against the displayed mark scheme. This lesson has been written for GCSE students but can be used with KS3 students who are studying the extension of a spring