This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within topic 5 (Waves in matter) of the OCR Gateway A GCSE Physics specification. The sub-topics and specification points that are tested within the lesson include: Recall and apply the equation to calculate wave speed using frequency and wavelength Describe wave motion in terms of amplitude, frequency, wavelength and period Define wavelength and frequency and be able to describe and apply the relationship between these and the wave velocity Describe differences between transverse and longitudinal waves Describe reflection and transmission of waves at material interface Understand how waves are used in ultrasound and SONAR Be able to describe how a ripple tank can be used to measure the speed of a wave The electromagnetic spectrum Use ray diagrams to show refraction This revision lesson has been designed to include the wide variety of mathematical skills that are tested in the Physics exam papers including rearranging formula, converting to S.I. units and calculating using standard form. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson, that is likely to be most effective when used over the course of a series of lessons, and has been designed to help students to revise and assess their knowledge of the content that is found in topics P4 (Waves and radioactivity), P5(Energy) and P6 (Global challenges) of the OCR Gateway A GCSE Combined Science specification. This is the content that will be assessed in paper 6 in the terminal exams. This revision lesson uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to cover the following sub-topics and specification points: Wave behaviour The electromagnetic spectrum Radioactivity Work done Power and efficiency Physics on the move Powering Earth This lesson contains a big emphasis on the mathematical calculations that will be involved in these exams, and as a result students are challenged to recall the equations and to apply them. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams. A lot of the tasks have been differentiated so that students of all abilities can access the work and be challenged appropriately.

This is a fully-resourced REVISION lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic 5 (Energy transfers in and between organisms) of the AQA A-level Biology specification. The sub-topics and specification points that are tested within the lesson include: The light dependent reaction including the production of ATP and reduced NADP and the photolysis of water The light-independent reaction to form triose phosphate and regenerate RuBP Identify environmental factors that limit the rate of photosynthesis Glycolysis as the first stage of both aerobic and anaerobic respiration The conversion of pyruvate to lactate The stages of aerobic respiration that occur in the mitochondria Losses of energy through food chains The roles of microorganisms in the nitrogen cycle The environmental issues of the use of fertilisers as seen with eutrophication Students will be engaged through the numerous quiz rounds such as “Can you DEPEND on your knowledge” and “Are you on the right PATH” whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual A-level terminal exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 8 (Fuels and Earth Science) of the Edexcel GCSE Chemistry specification. The specification points that are covered in this revision lesson include: Recall that hydrocarbons are compounds that contain carbon and hydrogen only Describe and explain the separation of crude oil into simpler, more useful mixtures by the process of fractional distillation Recall the names and uses of the fractions Explain how hydrocarbons in different fractions differ from each other Describe the complete combustion of hydrocarbon fuels as a reaction Explain why the incomplete combustion of hydrocarbons can produce carbon and carbon monoxide Explain how carbon monoxide behaves as a toxic gas Explain how impurities in some hydrocarbon fuels result in the production of sulfur dioxide Explain some problems associated with acid rain caused when sulfur dioxide dissolves in rain water Explain why, when fuels are burned in engines, oxygen and nitrogen can react together at high temperatures to produce oxides of nitrogen, which are pollutants Evaluate the advantages and disadvantages of using hydrogen, rather than petrol, as a fuel in cars Explain how cracking involves the breaking down of larger, saturated hydrocarbon molecules (alkanes) into smaller, more useful ones, some of which are unsaturated (alkenes) The students will thoroughly enjoy the range of activities, which includes a quiz competition called “POLLUTE THE AIR…WITH THE ANSWER” where they have to compete to be the 1st to recognise a pollutant gas from a series of clues whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging and fully-resourced revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 8 (Exchange and transport in animals) of the Edexcel GCSE Biology 9-1 specification. The specification points that are covered in this revision lesson include: Explain the need for exchange surfaces and a transport system in multicellular organisms including the calculation of surface area : volume ratio Explain how alveoli are adapted for gas exchange by diffusion between air in the lungs and blood in capillaries Describe the factors affecting the rate of diffusion, including surface area, concentration gradient and diffusion distance Explain how the structure of the blood is related to its function Explain how the structure of the blood vessels is related to their function Explain how the structure of the heart and circulatory system is related to its function, including the role of the major blood vessels, the valves Describe cellular respiration as an exothermic reaction which occurs continuously in living cells to release energy for metabolic processes, including aerobic and anaerobic respiration Compare the process of aerobic respiration with the process of anaerobic respiration Calculate heart rate, stroke volume and cardiac output, using the equation cardiac output = stroke volume × heart rate The students will thoroughly enjoy the range of activities, which include quiz competitions such as Where’s LENNY?” where they compete to recognise the blood vessel being described from the clues whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams.

This is an engaging revision lesson which uses a range of exam questions, understanding checks, differentiated tasks and quiz competitions to enable students to assess their understanding of the content within topic 1 (Key concepts in Chemistry) of the Edexcel GCSE Chemistry specification. Topic 1 is assessed in both papers 1 and 2, and therefore this lesson has been written in the detail that means it is likely to be used over the course of a number of lessons. The specification points that are covered in this revision lesson include: ATOMIC STRUCTURE Explain why atoms contain equal numbers of protons and electrons Recall the meaning of the term mass number of an atom Describe atoms of a given element as having the same number of protons in the nucleus and that this number is unique to that element Describe isotopes as different atoms of the same element containing the same number of protons but different numbers of neutrons in their nuclei Calculate the numbers of protons, neutrons and electrons in atoms given the atomic number and mass number Calculate the relative atomic mass of an element from the relative masses and abundances of its isotopes IONIC BONDING Explain how ionic bonds are formed by the transfer of electrons between atoms Recall that an ion is an atom or group of atoms with a positive or negative charge Calculate the numbers of protons, neutrons and electrons in simple ions given the atomic number and mass number Explain the formation of ions in ionic compounds from their atoms, limited to compounds of elements in groups 1, 2, 6 and 7 Deduce the formulae of ionic compounds (including oxides, hydroxides, halides, nitrates, carbonates and sulfates) given the formulae of the constituent ions COVALENT BONDING Explain how a covalent bond is formed when a pair of electrons is shared between two atoms Explain the formation of simple molecular, covalent substances, using dot and cross diagrams TYPES OF SUBSTANCE Explain the properties of typical covalent, simple molecular compounds Recall that graphite and diamond are different forms of carbon and that they are examples of giant covalent substances Describe the structures of graphite and diamond Explain the properties of metals, including malleability and the ability to conduct electricity CALCULATIONS INVOLVING MASSES Calculate relative formula mass given relative atomic masses Calculate masses of reactants and products from balanced equations, given the mass of one substance The students will thoroughly enjoy the range of activities, which includes a quiz competition called “POLLUTE THE AIR…WITH THE ANSWER” where they have to compete to be the 1st to recognise a pollutant gas from a series of clues whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging and fully resourced REVISION lesson which uses a range of exam questions, understanding checks, quick differentiated tasks and quiz competitions to enable students to assess their understanding of the content within topic 4 (Atomic structure) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Students should know that atoms are very small, having a radius of about 1 × 10-10 metres. Students should know that the basic structure of an atom is a positively charged nucleus composed of both protons and neutrons surrounded by negatively charged electrons Students should be able to use the atomic number and mass number and understand how these differ in isotopes Students should know the key stages in the development of the model of the atom and the main pieces of evidence that were found Students should know that some atomic nuclei are unstable and that the nucleus gives out radiation as it changes to become more stable. Students should know the penetrating and ionising power and range in air of the alpha particles, beta particles and gamma rays Students should be able to represent decay with equations and be able to describe the effect on the atomic and mass number Students should be able to determine the half-life of a radioactive isotope from given information. Students should be able to describe nuclear fission and fusion The students will thoroughly enjoy the range of activities, which include quiz competitions such as “It’s as easy as ABG” where they have to compete to be the 1st to work out the word formed from the letters of the different types of radiation whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 6 (Waves) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Transverse and longitudinal waves Properties of waves Reflection of waves Sound waves Waves for detection and exploration Types of electromagnetic waves Properties of electromagnetic waves Visible light The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to determine whether a passage about waves is 100% correct or not whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 1 (General Physics) of the CIE IGCSE Physics (0625) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE Define speed and calculate average speed from total distance divided by total time Plot and interpret a speed-time graph or a distance-time graph Recognise from the shape of a speed-time graph when a body is at rest, moving at a constant speed or changing speed Calculate the area under a speed-time graph to work out the distance travelled for motion with constant acceleration Show familiarity with the idea of the mass of a body State that weight is a gravitational force Distinguish between mass and weight Recall and use the equation W = mg Recall and use the equation density = mass divided by volume Understand friction as the force between two surfaces which impedes motion and results in heating Calculate moment using the product force × perpendicular distance from the pivot Identify changes in kinetic, gravitational potential, chemical, elastic (strain), nuclear and internal energy that have occurred as a result of an event or process Recognise that energy is transferred during events and processes, including examples of transfer by forces (mechanical working), by electrical currents (electrical working), by heating and by waves Apply the principle of conservation of energy to simple examples Describe how electricity or other useful forms of energy may be obtained from a range of sources Show a qualitative understanding of efficiency Demonstrate understanding that work done = energy transferred Relate (without calculation) power to work done and time taken, using appropriate examples SUPPLEMENT Distinguish between speed and velocity Define and calculate acceleration Understand deceleration as a negative acceleration Describe, and use the concept of, weight as the effect of a gravitational field on a mass State Hooke’s Law and recall and use the expression F = k x, where k is the spring constant Apply the principle of moments to different situations Understand that vectors have a magnitude and direction The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Are you the KING of the KINGDOMS” where they have to name the kingdoms involved based on a feature whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual IGCSE exam

This is an engaging lesson that looks at a range of condensation polymers that are formed by condensation reactions. The lesson includes a detailed lesson presentation (51 slides) and accompanying worksheets which contain a differentiated task. The lesson begins by providing the students with a definition of a condensation reaction and challenging them to predict the identity of the smaller molecule. Moving forwards, students will learn that as well as water being a product, the larger molecule is known as a condensation polymer. Time is taken to look at a range of condensation polymers throughout the course of the lesson, and this includes both natural and artificial examples. Students are shown how to draw block diagrams to visualise how the functional groups react and then once water is removed, they are able to see the group that remains and joins the parts together. Students are shown how to name the ester formed according to the carboxylic acid and alcohol involved. The final part of the lesson involves a summary quiz called “It’s time to take the POLYGRAPH” where they have to read a number of passages about condensation polymers and decide which ones are telling lies and which are the truth. This lesson has been written for GCSE students

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Chemical changes) of the Edexcel GCSE Chemistry specification. The specification points that are covered in this revision lesson include: Recall that acids in solution are sources of hydrogen ions and alkalis in solution are sources of hydroxide ions Recall that the higher the concentration of hydrogen ions in an acidic solution, the lower the pH; and the higher the concentration of hydroxide ions in an alkaline solution, the higher the pH Recall that as hydrogen ion concentration in a solution increases by a factor of 10, the pH of the solution decreases by 1 Recall that a base is any substance that reacts with an acid to form a salt and water only Recall that alkalis are soluble bases Explain the general reactions of aqueous solutions of acids with metals, metal oxides, metal hydroxides and metal carbonates to produce salts Describe the chemical test for hydrogen and carbon dioxide Describe a neutralisation reaction as a reaction between an acid and a base Explain an acid-alkali neutralisation as a reaction in which hydrogen ions (H+) from the acid react with hydroxide ions (OH–) from the alkali to form water Explain how a soluble salts is prepared from an acid and an insoluble reactant Explain how soluble salts are prepared from an acid and a soluble reactant Recall that electrolytes are ionic compounds in the molten state or dissolved in water Explain the movement of ions during electrolysis Explain the formation of the products in electrolysis Write half equations for reactions occurring at the anode and cathode in electrolysis Explain oxidation and reduction in terms of loss or gain of electrons The students will thoroughly enjoy the range of activities, which includes quiz competitions like “From NUMBERS 2 LETTERS” where they compete to be the 1st to get the abbreviation Oil Rig whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 2 (Electricity) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Standard circuit diagram symbols Current, resistance and potential difference Resistors Series and parallel circuits Direct and alternating potential difference Mains electricity Power Static charge The students will thoroughly enjoy the range of activities, which include quiz competitions such as “GRAFT over these GRAPHS” where they have to compete to be the 1st to recognise one of the graphs associated with the resistors whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams