This is an engaging and fully resourced REVISION lesson which uses a range of exam questions, understanding checks, quick differentiated tasks and quiz competitions to enable students to assess their understanding of the content within topic 4 (Atomic structure) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Students should know that atoms are very small, having a radius of about 1 × 10-10 metres. Students should know that the basic structure of an atom is a positively charged nucleus composed of both protons and neutrons surrounded by negatively charged electrons Students should be able to use the atomic number and mass number and understand how these differ in isotopes Students should know the key stages in the development of the model of the atom and the main pieces of evidence that were found Students should know that some atomic nuclei are unstable and that the nucleus gives out radiation as it changes to become more stable. Students should know the penetrating and ionising power and range in air of the alpha particles, beta particles and gamma rays Students should be able to represent decay with equations and be able to describe the effect on the atomic and mass number Students should be able to determine the half-life of a radioactive isotope from given information. Students should be able to describe nuclear fission and fusion The students will thoroughly enjoy the range of activities, which include quiz competitions such as “It’s as easy as ABG” where they have to compete to be the 1st to work out the word formed from the letters of the different types of radiation whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is a fully-resourced REVISION lesson which challenges the students on their knowledge of the content in TOPIC B5 (Genetics) of the Edexcel GCSE Combined Science specification. The lesson uses an engaging PowerPoint (63 slides) and accompanying worksheets to motivate students whilst they assess their understanding of this topic. A range of exam questions, quick tasks and quiz competitions are used to test the following sub-topics: Recognising and using genetic terminology in context Constructing genetic diagrams to calculate offspring percentages for diseases caused by dominant and recessive alleles The sex chromosomes and sex determination Meiosis and the formation of haploid daughter cells The structure of DNA Extracting DNA from a fruit Genetic and environmental variation Mutations and their effect on the phenotype The mathematical element of the course is also tested throughout the lesson and students are given helpful hints on exam techniques and how to structure answers. This resource is suitable for use at the end of topic B3 or in the lead up to mocks or the actual GCSE exams.

This is a fully-resourced REVISION lesson which challenges the students on their knowledge of the content in TOPIC B2 (Cells and control) of the Edexcel GCSE Combined Science specification. The lesson uses an engaging PowerPoint (70 slides) and accompanying worksheets to motivate students whilst they assess their understanding of this topic. A range of exam questions, quick tasks and quiz competitions are used to test the following sub-topics: The structure of the CNS Reflex reactions and the neurones involved Synapses Mitosis and the cell cycle The use of percentile charts to monitor growth Cell differentiation and specialisation Stem cells and their potential for use in medicine There is a big emphasis on the mathematical elements of the course such as percentage change and standard form and students are given helpful hints on exam techniques and how to structure answers. This resource is suitable for use at the end of topic B2 or in the lead up to mocks or the actual GCSE exams.

This fully-resourced lesson describes the mechanism of action of enzymes and explains how their specificity is related to their 3D structure. The engaging PowerPoint and accompanying resources have been designed to cover points 2.7 (i), (ii) and (iii) in unit 1 of the Edexcel International A-level Biology specification and introduces intracellular and extracellular enzymes where these proteins act to reduce the activation energy. The lesson has been specifically planned to tie in with related topics that were previously covered such as protein structure, globular proteins and intracellular enzymes. This prior knowledge is tested through a series of exam-style questions along with current understanding and mark schemes are included in the PowerPoint so that students can assess their answers. Students will learn that enzymes are large globular proteins which contain an active site that consists of a small number of amino acids. Emil Fischer’s lock and key hypothesis is introduced to enable students to recognise that their specificity is the result of an active site that is complementary in shape to a single type of substrate. Time is taken to discuss key details such as the control of the shape of the active site by the tertiary structure of the protein. The induced-fit model is described so students can understand how the enzyme-susbtrate complex is stabilised and then students are challenged to order the sequence of events in an enzyme-controlled reaction. The lesson finishes with a focus on ATP synthase and DNA polymerase so that students are aware of these important intracellular enzymes when learning about the details of respiration and DNA replication

This lesson describes how Fick’s law of diffusion is governed by the three main properties of gas exchange surfaces in living organisms. The PowerPoint and accompanying worksheets have been designed to cover points 2.1 (i & ii) of the Edexcel International A-level Biology specification and there is a particular focus on the relationship between the size of an organism or structure and its surface to volume ratio. Adolf Fick is briefly introduced at the start of the lesson and the students will learn that his law of diffusion governs the diffusion of a gas across a membrane and is dependent on three properties. The students are likely to know that surface area is one of these properties but although they may have been introduced to the surface area to volume ratio at iGCSE, their understanding of its relevance tends to be mixed. Therefore, real life examples are included throughout the lesson that emphasise the importance of this ratio in order to increase the relevance. A lot of students worry about the maths calculations that are associated with this topic so a step by step guide is included at the start of the lesson to walk them through the calculation of the surface area, the volume and then the ratio. Through worked examples and understanding checks, SA/V ratios are calculated for cubes of increasing side length and living organisms of different size. These comparative values will enable the students to conclude that the larger the organism or structure, the lower the surface area to volume ratio. A differentiated task is then used to challenge the students to explain the relationship between the ratio and the metabolic demands of an organism and this leads into the next part of the lesson, where the adaptations of a human to increase the ratio at the gas exchange surface is covered. The students will calculate the SA/V ratio of a human alveolus (using the surface area and volume formulae for a sphere) and will see the significant increase that results from the folding of the membranes. The remainder of the lesson introduces concentration difference and thickness of membrane as the other two properties in Fick’s law of diffusion and students are reminded that the maintenance of a steep concentration gradient and a reduction in the diffusion distance are critical for this transport mechanism. This lesson has been specifically planned to prepare students for the next lesson which describes how the structure of the mammalian lung is adapted for rapid gas exchange (specification point 2.1 [iii])

This lesson describes the international and local conservation agreements that are made to protect species and habitats. The detailed PowerPoint and accompanying worksheets have been designed to cover point 4.2.1 (i) of the OCR A-level Biology A specification and includes details of CITES, CBD and CSS. Many hours of research have gone into the planning of this lesson to ensure that a range of interesting biological examples are included, with the aim of fully engaging the students in the material to increase its relevance. Beginning with the Convention on International Trade in Endangered Species of Wild Fauna and Flora, the students will learn that this was first agreed in 1973 and that 35000 species are currently found in appendix I, II or III. Time is taken to go through the meaning of each appendix and then the following animal and plant species are used to explain the finer details of the agreement: Tree pangolin, eastern black rhino for CITES appendix I Darwin’s orchid for CITES appendix II Four-horned antelope for CITES appendix III Exam-style questions are used to check on their understanding of the current topic as well as to challenge their knowledge of previously-covered topics such as the functions of keratin, when considering the structure of the rhino horn. Each of these questions has its own markscheme which is embedded in the PowerPoint and this allows the students to constantly assess their progress. Moving forwards, the Rio Convention on Biological Diversity is introduced and students will understand that this is a key document regarding sustainable development. The final part of the lesson considers local conservation agreements, focusing on the Countryside Stewardship Scheme and its replacement, the Environmental Stewardship Scheme. Students are told that farmers, woodland owners, foresters and land managers can apply for funding for a range of options including hedgerow management, low input grassland, buffer strips, management plans and soil protection options. The importance of the hedgerows for multiple species is discussed, and again a real-life example is used with bats to increase the likelihood of retention. The last task challenges them to use their overall knowledge of module 4.2.1 (biodiversity) to explain why buffer strips consisting of multiple types of vegetation are used and to explain why these could help when a farmer is using continuous monoculture.

This lesson discusses how biodiversity may be considered at different levels and describes how to calculate Simpson’s Index of diversity. The PowerPoint and accompanying worksheets have primarily been designed to cover points 4.2.1 (a, c and d) of the OCR A-level Biology A specification but also make links to the upcoming topics of classification, natural selection and adaptations A quiz competition called BIOLOGICAL TERMINOLOGY SNAP runs over the course of the lesson and this will engage the students whilst challenging them to recognise species, population, biodiversity, community and natural selection from their respective definitions. Once biodiversity as the variety of living organisms in a habitat is revealed, the students will learn that this can relate to a range of habitats, from those in the local area to the Earth. Moving forwards, the students will begin to understand that biodiversity can be considered at a range of levels which include within a habitat, within a species and within different habitats so that they can be compared. Species richness as a measure of the number of different species in a community is met and a biological example in the rainforests of Madagascar is used to increase its relevance. However, students will also be introduced to species evenness and will learn that in order for a habitat to be deemed to be biodiverse, it must be both species rich and even. The students are introduced to an unfamiliar formula that calculates the heterozygosity index and are challenged to apply their knowledge to this situation, as well as linking a low H value to natural selection. The rest of the lesson focuses on the calculation of Simpson’s Index of diversity and a 4-step guide is used to walk students through each part of the calculation. This is done in combination with a worked example to allow students to visualise how the formula should be applied to actual figures. Using the method, they will then calculate a value of D for a comparable habitat to allow the two values to be considered and the significance of a higher value is explained. All of the exam-style questions have mark schemes embedded in the PowerPoint to allow students to continuously assess their progress and understanding.

This fully-resourced lesson explains how gel electrophoresis is used to separate DNA fragments or proteins and explores its applications in genetic fingerprinting. The engaging and detailed PowerPoint and accompanying resources have been written to cover point 6.1.3 (e) of the OCR A-level Biology A specification The steps of the genetic fingerprinting process is covered the whole lesson but the main focus is the use of gel electrophoresis within this process. Students will be introduced to STRs and will come to recognise their usefulness in human identification as a result of the variability between individuals. Moving forwards, the involvement of the PCR is discussed and students are challenged on their knowledge of this process as it was encountered in a previous lesson. A brief outline of the role of restriction enzymes is provided to support students when these key gene technology enzymes are met in more detail later in the module. The main section of the lesson focuses on the use of gel electrophoresis to separate DNA fragments (as well as proteins) and the key ideas of separation due to differences in base pair length or molecular mass are discussed and explained. As well as current understanding checks, an application question involving Huntington’s disease is used to challenge their ability to apply their knowledge of the process to an unfamiliar situation. The remainder of the lesson describes how the DNA is transferred to a membrane and hybridisation probes are used to create a pattern on the X-ray film. Time has been taken to make continuous links to the previous lessons in module 6.1.3 as well as those from module 2.1.3 where DNA, RNA and protein synthesis were introduced.

An engaging lesson presentation (30 slides) that looks at electric current and ensures that students know the key details about this factor in preparation for their GCSE studies. The lesson begins by forming a definition for this electrical term and then as the lesson progresses, this definition is broken so that each element is understood. Students will be introduced to the difference between electron flow and conventional current. Time is taken to ensure that students understand that an ammeter must be set up in series. The remainder of the lesson will focus on the mathematical calculations which include current and important skills such as converting between units is covered.] As stated above, this lesson has been designed primarily for those students taking their GCSE exams (14 - 16 year olds in the UK) but is suitable for younger students too.

A fully-resourced lesson which looks at the structures of arteries, veins and capillaries and ensures that students can relate these features to their respective functions. The lesson includes an engaging lesson presentation (41 slides) and a differentiated worksheet The lesson begins by getting the students to come up with a really simple rule to remind themselves that arteries carry blood away from the heart. They are then challenged to extend this definition by considering the pressure of the blood found in arteries. Students will learn that most arteries carry oxygenated blood but will consider and recall the artery which is the exception to the rule. Students are shown a diagram of the basic structure of the artery and the reasons for the narrow lumen and thick muscular wall are explained. Moving forwards, students are challenged to use the work on arteries to sketch a diagram of a vein and to explain why they have given this vessel certain features. A quick competition is then used to check their understand of the work so far whilst introducing valves and again they are given a chance to work out which blood vessel would need these structures in their lumen. The remainder of the lesson focuses on the capillary and time is taken to relate the features to an actual example involving the alveoli of the lungs. There are regular progress checks throughout the lesson to allow the students to check on their understanding. As always, the lesson finishes with a slide containing advanced terminology so that students who have aspirations to take A-level Biology can extend and deepen their knowledge

A fully-resourced lesson which guides students through using genetic trees to work out the genotypes of unknown individuals and also how to work out whether a condition is caused by a dominant or a recessive allele. This lesson includes a detailed lesson presentation (24 slides) and a series of differentiated questions to allow the students to try to apply their new-found knowledge. The lesson begins by challenging students to recall the meaning of the key terms, genotype and phenotype. Time is taken initially to explain how genetic trees can be used in questions. Lots of useful hints are given throughout the lesson, such as filling in the genotypes for those that you already know like the affected in a recessive condition. Moving forwards, a worked example is used to talk the students through a question. Students are then given the opportunity to try a question and this has been differentiated so those who need extra assistance can still access the work. The remainder of the lesson shows the students how they can use the tree to work out whether the condition is caused by a dominant or recessive allele and again a progress check is used so students can assess their understanding. This lesson has been designed for both GCSE and A-level students.

A fully-resourced lesson which includes a concise lesson presentation (16 slides) and accompanying worksheet that guides students through the use of the gravitational potential energy equation to calculate energy, mass and height. The lesson begins by challenging students to work out the factors involved in calculating gravitational potential energy having been given a scenario with some balls on shelves. The students will discover that mass and height affect the energy size and that a third factor, gravity constant, is involved. The rest of the lesson focuses on using the equation to calculate energy, mass and height. In terms of the latter, students have to carry out an engaging task to work out the height that three flags have to be hoisted to during a medal ceremony. This lesson has been written for GCSE students.

An engaging lesson which uses a range of tasks to ensure that students understand the meaning of the term, background radiation, and are able to name a number of sources of this type of radiation. The start of the lesson focuses on the definition of background radiation and the idea that is all around us is revisited again a number of times during the lesson. Through a range of activities and discussion points, students will meet the different sources as well as the % that they each contribute. It seemed appropriate to challenge some mathematical and scientific skills at this point so students will represent the data in a pie chart form. Related topics are discussed such as Chernobyl. Progress checks are written into the lesson at regular intervals so the students can constantly assess their understanding. This lesson is designed for GCSE students.

This fully-resourced REVISION lesson has been designed to enable the students to challenge their knowledge of the content of topic 16 (Inherited change) of the CIE A-level Biology specification. The engaging PowerPoint and accompanying differentiated worksheets will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Homologous pairs of chromosomes The meanings of haploid and diploid The behaviour of chromosomes in meiosis Crossing over and random assortment as causes of genetic variation The use of key genetic terminology The use of genetic diagrams to solve problems including autosomal and sex-linkage, dihybrid inheritance and gene interactions The use of the chi-squared test Gene mutations Genetic control of protein production in prokaryotes Gibberellins and how they cause the breakdown of DELLA proteins Due to the extensiveness of this resource, it is likely that it will take a number of lessons to go through all of the activities

This fully-resourced lesson looks at the external and internal structure of the mammalian heart and explains how the differences in the thickness of the chamber walls is related to function. The engaging and detailed PowerPoint and accompanying resources have been designed to cover points 8.2 (a) and (b) of the CIE International A-level Biology specification As this topic was covered at GCSE, the lesson has been planned to build on this prior knowledge whilst adding the key details which will enable students to provide A-level standard answers. The primary focus is the identification of the different structures of the heart but it also challenges their ability to recognise the important relationship to function. As detailed in specification point (b), time is taken to ensure that students can explain why the atrial walls are thinner than the ventricle walls and why the right ventricle has a thinner wall than the left ventricle. Opportunities are taken throughout the lesson to link this topic to the others found in topics 8.1 and 8.2 including those which have already been covered like circulatory systems as well as those which are upcoming such as the cardiac cycle. There is also an application question where students have to explain why a hole in the ventricular septum would need to be repaired if it doesn’t naturally close over time.

This detailed lesson explains how observable features at a microscopic level can be used to classify living organisms into one of the five kingdoms. The engaging PowerPoint and accompanying resources have been designed to cover point 4.2.2 © (i) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply an understanding of the features of the animalia, plantae, fungi, protoctista and prokaryotae kingdoms. This lesson begins with a knowledge recall as students have to recognise that prior to 1990, kingdom was the highest taxa in the classification hierarchy. Moving forwards, they will recall the names of the five kingdoms and immediately be challenged to split them so that the prokaryotae kingdom is left on its own. An opportunity is taken at this point to check on their prior knowledge of the structure of a bacterial cell from module 2.1.1. These prior knowledge checks are found throughout the lesson (along with current understanding checks) as students are also tested on their knowledge of the structure and function of cellulose. This is found in the section of the lesson where the main constituent of the wall can be used to distinguish between plantae, fungi and prokaryotae. Quick quiz competitions, such as YOU DO THE MATH and SAY WHAT YOU SEE are used to introduce key values and words in a fun and memorable way. The final part of the lesson looks at the protoctista kingdom and students will come to understand how these organisms tend to share a lot of animal or plant-like features. Both of the accompanying resources have been differentiated to allow students of differing abilities to access the work and this lesson has been written to tie in with the previously uploaded lesson on taxonomic hierarchy and the binomial naming system (4.2.2 a & b).

This fully-resourced lesson distinguishes between active and passive, natural and artificial immunity and explains how vaccinations can be used to control disease. The engaging and detailed PowerPoint and accompanying resources have been designed to cover point 11.2 (d) of the CIE A-level Biology specification and there is also a description and discussion on the concept of herd immunity. In topic 11.1, students were introduced to the primary and secondary immune responses so the start of this lesson uses an imaginary game of TOP TRUMPS to challenge them on the depth of their understanding. This will act to remind them that a larger concentration of antibodies is produced in a quicker time in the secondary response. The importance of antibodies and the production of memory cells for the development of immunity is emphasised and this will be continually referenced as the lesson progresses. The students will learn that this response of the body to a pathogen that has entered the body through natural processes is natural active immunity. Moving forwards, time is taken to look at vaccinations as an example of artificial active immunity. Another series of questions focusing on the MMR vaccine will challenge the students to explain how the deliberate exposure to antigenic material activates the immune response and leads to the retention of memory cells. A quick quiz competition is used to introduce the variety of forms that the antigenic material can take along with examples of diseases that are vaccinated against using these methods. The eradication of smallpox is used to describe the concept of herd immunity and the students are given time to consider the scientific questions and concerns that arise when the use of this pathway is a possible option for a government. The remainder of the lesson looks at the different forms of passive immunity and describes the drawbacks in terms of the need for a full response if a pathogen is re-encountered

This fully-resourced lesson describes how it’s possible for 1 gene to give rise to multiple products as a result of post-transcriptional modification of mRNA. The detailed PowerPoint and accompanying resources have been designed to cover point 7.2 (iii) of the Edexcel A-level Biology B specification. The lesson begins with a knowledge recall as the students have to recognise the definition of a gene as a sequence of bases on a DNA molecule that codes for a sequence of amino acids in a polypeptide chain. This description was introduced in topic 1 and the aim of the start of the lesson is to introduce the fact that despite this definition, most of the nuclear DNA in eukaryotes doesn’t actually code for proteins. A quick quiz competition is then used to introduce exons as the coding regions within a gene before students are challenged to predict the name of the non-coding regions and then to suggest a function for these introns. At this point, the students will complete a task that acts as a prior knowledge check where they have to identify the 6 errors in the descriptive passage about the lac operon and its role in the regulation of gene expression in prokaryotes. Moving forwards, pre-mRNA as a primary transcript is introduced and students will learn that this isn’t the mature strand that moves off to the ribosome for translation. Instead, a process called splicing takes place where the introns are removed and the remaining exons are joined together. Another quick quiz round leads to an answer of 20000 and students will learn that this is the number of protein-coding genes in the human genome. Importantly, the students are then told that the number of proteins that are synthesised is much higher than this value and a class discussion period encourages them to come up with biological suggestions for this discrepancy between the two numbers. The lesson concludes with a series of understanding and application questions where students will learn that alternative splicing enables a gene to produce more than a single protein and that this natural phenomenon greatly increases biodiversity.

This detailed lesson describes the fluid mosaic model of membrane structure and also describes the roles of its components. The detailed and engaging PowerPoint and accompanying worksheets have been designed to cover specification point 2.1.5 (b) of the OCR A-level Biology A specification and clear links are made to related topics such as the binding of peptide hormones The fluid mosaic model is introduced at the start of the lesson so that it can be referenced at appropriate points throughout the lesson. Students were introduced to phospholipids in module 2.1.2 and an initial task challenges them to spot the errors in a passage describing the structure and properties of this molecule. This reminds them of the bilayer arrangement, with the hydrophilic phosphate heads protruding outwards into the aqueous solutions on the inside and the outside of the cell. In a link to some upcoming lessons on the transport mechanisms, the students will learn that only small, non-polar molecules can move by simple diffusion and that this is through the tails of the bilayer. This introduces the need for transmembrane proteins to allow large or polar molecules to move into the cell by facilitated diffusion and active transport. Proteins that act as receptors as also introduced and an opportunity is taken to make a link to an upcoming topic so that students can understand how hormones or drugs will bind to target cells in this way. Moving forwards, the structure of cholesterol is covered and students will learn that this hydrophobic molecule sits in the middle of the tails and therefore acts to regulate membrane fluidity. The final part of the lesson challenges the students to apply their newly-acquired knowledge to a series of questions where they have to explain why proteins may have moved when two cells are used and to suggest why there is a larger proportion of these proteins in the inner mitochondrial membrane than the outer membrane.

This detailed lesson describes the sequence of events that occur during the first stage of protein synthesis, which is known as transcription. The detailed lesson PowerPoint and accompanying worksheet are the first in a series of two lesson resources that have been designed to cover the details of point 2.13 of the Edexcel International A-level Biology specification and include details of the DNA template strand, RNA polymerase and messenger RNA. The lesson begins by challenging the students to work out that most of the nuclear DNA in eukaryotes does not code for polypeptides. This allows the promoter region and terminator region to be introduced, along with the structural gene. Through the use of an engaging quiz competition, students will learn that the strand of DNA involved in transcription is known as the DNA template (or antisense) strand and the other strand is the coding strand. Links to previous lessons on DNA and RNA structure are made throughout and students are continuously challenged on their prior knowledge as well as they current understanding of the lesson topic. Moving forwards, the actual process of transcription is covered in a 7 step bullet point description where the students are asked to complete each passage using the information previously provided. An exam-style question is used to check on their understanding before the final task of the lesson looks at the journey of mRNA to the ribosome for the next stage of translation. This lesson has been written to directly lead into the following lesson on translation