This detailed and engaging lesson describes the basic structure of a mononucleotide and the similarities and differences between DNA and RNA. The PowerPoint and accompanying worksheet containing exam-style questions have been designed to cover points 2.5 (i) & (ii) of the Pearson Edexcel A-level Biology A specification. In topic 1, the students were introduced to a number of monomers and the start of the lesson challenges them to recognise the key term nucleotide when only the letters U, C and T are shown. The next part of the lesson describes the structure of a DNA nucleotide and an RNA nucleotide so that the pentose sugar and the bases adenine, cytosine and guanine can be recognised as similarities whilst deoxyribose and ribose and thymine and uracil are seen as the differences. Time is taken to discuss how a phosphodiester bond is formed between adjacent nucleotides and their prior knowledge and understanding of condensation reactions is tested through a series of questions. Students are then introduced to the purine and pyrimidine bases and this leads into the description of the double-helical structure of DNA and the hydrogen bonds between complementary bases. The final section of the lesson describes the structure of mRNA, tRNA and rRNA and students are challenged to explain why this single stranded polynucleotide is shorter than DNA In addition to the current understanding and prior knowledge checks, a number of quiz rounds have been written into the lesson to introduce key terms in a fun and memorable way and the final round acts as a final check on the structures of DNA and RNA.

This fully-resourced lesson describes how Mycobacterium tuberculosis and human immunodeficiency virus infect human cells and cause symptoms. The PowerPoint and accompanying resources have been designed to cover point 6.6 in unit 4 of the Edexcel International A-level Biology specification and ties in closely with the previous lesson where the structure of bacteria and viruses were compared. The lesson begins by ensuring that students recognise that TB is caused by the infection of a species of bacteria known as Mycobacterium tuberculosis and they will challenged to use their knowledge of scientific classification to recall that this pathogen is found in the mycobacteria genus. At this point, the students are told that the cell walls of this genus contain mycolic acids and later in the lesson they will have to work out that this specialist feature enables this pathogen to survive phagocytosis. A series of exam-style questions will challenge their knowledge of the respiratory and immune systems as they can understand how the bacterium travels to the alveoli where it is engulfed by a macrophage. Key terms like granuloma and necrosis are introduced and the sequence of events that occur following the formation of this aggregate of cells is described. The structure of viruses was covered during the previous lesson, so this next part of the lesson starts by challenging the students to recall the capsid, genetic material in the form of viral RNA and the lipid envelope. At this point, the students are introduced to gp120, the glycoprotein which is exposed on the surface of the lipid envelope, as this structure is critical for the entry of the virus into host cells. Students will annotate a basic diagram of HIV with these four structures which also has gp41 labelled. A quick quiz competition introduces the names of the enzymes found inside the capsid Moving forwards, the main task of this part of the lesson describes how HIV binds to the helper T cells, injects its capsid and integrates its DNA into the host’s genome in order to replicate to form virus particles (virions). Students are guided through the formation of a detailed answer about the mechanism of HIV and have to input key terms and structures where information is missing. Students will learn that the increase in the number of virus particles and a decrease in helper T cells and other immune cells results in infections like TB and by opportunistic pathogens and that this stage is recognised as AIDS

This fully-resourced lesson describes the role of memory cells in the secondary immune response. The PowerPoint and accompanying resources have been designed to cover specification point 6.7 (iv) of the Edexcel A-level Biology B specification but also contains a detailed description of the structure and function of antibodies and therefore covers this part of 6.7 (ii) As memory B cells differentiate into plasma cells that produce antibodies when a specific antigen is re-encountered, it was decided to link the immune responses and antibodies together in one lesson. The lesson begins by checking on the students incoming knowledge to ensure that they recognise that B cells differentiate into plasma cells and memory cells. This was introduced in a previous lesson on the specific immune response and students must be confident in their understanding if the development of immunity is to be understood. A couple of quick quiz competitions are then used to introduce key terms so that the structure of antibodies in terms of polypeptide chains, variable and constant regions and hinge regions are met. Time is taken to focus on the variable region and to explain how the specificity of this for a particular antigen allows neutralisation and agglutination to take place. The remainder of the lesson focuses on the differences between the primary and secondary immune responses and a series of exam-style questions will enable students to understand that the quicker production of a greater concentration of these antibodies in the secondary response is due to the retention of memory cells.

This fully-resourced lesson describes how rod cells in the mammalian retina detect stimuli to allow vision in low light intensity. The detailed PowerPoint and accompanying resources have been designed to cover the second part of point 8.5 of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification and includes reference to the roles of rhodopsin, opsin, retinal, sodium ions, cation channels and hyperpolarisation in the formation of action potentials in the optic neurones. It is likely that students will be aware that the human retina contains rod and cone cells, so this lesson builds on that knowledge and adds the detail needed at this level. Students will discover that the optical pigment in rod cells is rhodopsin and that the bleaching of this into retinal and opsin results in a cascade of events that allows an action potential to be initiated along the optic nerve. Time is taken to go through the events that occur in the dark and then the students are challenged to use this as a guide when explaining how the events differ in the light. Key terms like depolarisation and hyperpolarisation, that were met earlier in topic 8, are used to explain the changes in membrane potential and the resulting effect on the connection with the bipolar and ganglion cells is then described.

This fully-resourced lesson describes the process of contraction of skeletal muscle in terms of the sliding filament theory. The PowerPoint and accompanying resources have been designed to cover point 7.11 of the Edexcel International A-level Biology specification and includes descriptions of the role of actin, myosin, troponin, tropomyosin, calcium ions, ATP and ATPase. The lesson begins with a study of the structure of the thick and thin filaments. Students will recognise that the protruding heads of the myosin molecule are mobile and this enables this protein to bind to the binding sites when they are exposed on actin. This leads into the introduction of troponin and tropomyosin and key details about the binding of calcium to this complex is explained. Moving forwards, students are encouraged to discuss possible reasons that can explain how the sarcomere narrows during contraction when the filaments remain the same length. This main part of the lesson goes through the main steps of the sliding filament model of muscle contraction and the critical roles of the calcium ions and ATP are discussed. The final task of the lesson challenges the students to apply their knowledge by describing the immediate effect on muscle contraction when one of the elements doesn’t function correctly. This lesson has been written to tie in with the previous lesson on the structure of skeletal muscle fibre (point 7.10)

This lesson describes the transport mechanism of osmosis as the movement of water molecules from a high water potential to a lower water potential. The PowerPoint and accompanying resources are part of the second lesson in a series of 4 lessons which have been designed to cover point [c] as detailed in AS unit 1, topic 3 of the WJEC A-level Biology specification and also describes how cells are affected by this movement of water It’s likely that students will have used the term concentration in their osmosis definitions at GCSE, so the aim of the starter task is to introduce water potential to allow students to begin to recognise osmosis as the movement of water molecules from a high water potential to a lower potential, with the water potential gradient. Time is taken to describe the finer details of water potential to enable students to understand that 0 is the highest value (pure water) and that this becomes negative once solutes are dissolved. Exam-style questions are used throughout the lesson to check on current understanding as well as prior knowledge checks which make links to previously covered topics such as the lipid bilayer of the cell membrane. The remainder of the lesson focuses on the movement of water when animal and plant cells are suspended in hypotonic, hypertonic or isotonic solutions and the final appearance of these cells is described, including any issues this may cause.

This lesson describes the levels of organisation, including the aggregation of cells into tissues, tissues into organs and organs into organ systems. The detailed and engaging PowerPoint and accompanying resources have been designed to cover point (d) of AS unit 1, topic 2 of the WJEC A-level Biology specification and focuses on the levels of organisation in humans and plants. Please note that the lesson does not contain prepared slides of tissue as this is covered in a later lesson. The lesson begins by using the process of haematopoiesis from haematopoietic stem cells to demonstrate how the red blood cell and neutrophil differ significantly in structure despite arising from the same cell along the same cell lineage. A series of exam-style questions will not only challenge their knowledge of structure but also their ability to apply this knowledge to unfamiliar situations. These differences in cell structure is further exemplified by the epithelial cells of the respiratory tract and students are challenged to remember how the shape and arrangement of these cells differ in the trachea and alveoli in relation to their function. The link between specialised cells and tissues is made at this point of the lesson so students are reminded that a tissue is a group of cells that work together to perform a specific function or set of functions. Moving forwards, a quick quiz competition will challenge the students to recognise the liver, kidney, spinal cord and pancreas from a brief functional description and this leads into a series of questions that links back to topics 1 and earlier in topic 2 where proteins, organelles and carbohydrates were originally covered. These prior knowledge checks are found throughout the lesson, along with current understanding checks, and all of the mark schemes are embedded into the PowerPoint to allow students to assess their progress. In terms of organ systems, a quick task challenges them to recognise 8 of the 11 that are found in humans from descriptions and this leaves them to identify the gaseous exchange, digestive and reproductive systems as the remaining 3. The remainder of the lesson focuses on specialised plant cells and the differing shapes and features of the palisade and spongy cells in the mesophyll layer and the guard cells are covered at length and in detail. The cells found in the xylem and phloem tissue are also discussed.

This lesson explains how a nerve impulse (action potential) is conducted along an axon and focuses on the role of the sodium and potassium ions. The PowerPoint and accompanying resources have been designed to cover point 8.4 of the Edexcel International A-level Biology specification and contains detailed descriptions of resting potential, depolarisation, repolarisation, hyperpolarisation and the refractory period. This topic is commonly assessed in the terminal exams so extensive planning ensures that this resource includes a wide range of activities to motivate and engage the students whilst ensuring that the content is covered in the depth of detail that will allow them to have a real understanding. Interspersed within the activities are understanding checks and prior knowledge checks to enable the students to not only assess their progress against the current topic but also to challenge themselves on the links to earlier topics such as methods of movements across cell membranes. There are also a number of quiz competitions which are used to introduce key terms and values in a fun and memorable way and discussion points to encourage the students to consider why a particular process or mechanism occurs. Over the course of the lesson, the students will learn and discover how the movement of ions across the membrane causes the membrane potential to change. They will see how the resting potential is maintained through the use of the sodium/potassium pump and potassium ion leakage. There is a real focus on depolarisation to allow students to understand how generator potentials can combine and if the resulting depolarisation then exceeds the threshold potential, a full depolarisation will occur. At this point in the lesson students will discover how the all or nothing response explains that action potentials have the same magnitude and that instead a stronger stimulus is linked to an increase in the frequency of the transmission. The rest of the lesson challenges the students to apply their knowledge to explain how repolarisation and hyperpolarisation result and to suggest advantages of the refractory period for nerve cells.

This lesson describes the roles of the SAN and Purkyne fibres in the coordination of the three stages of the cardiac cycle. The PowerPoint and accompanying resources are part of the first lesson in a series of 2 lessons that have been designed to cover point [c] in topic 3 of AS unit 2 of the WJEC A-level Biology specification and has a specific focus on the pressure changes that occur in each stage of the cycle The start of the lesson introduces the cardiac cycle as well as the key term systole, so that students can immediately recognise that the three stages of the cycle are atrial and ventricular systole followed by diastole. Students are challenged on their prior knowledge of the structure of the heart as they have to name and state the function of an atrioventricular and semi-lunar valve from an internal diagram. This leads into the key point that pressure changes in the chambers and the major arteries results in the opening and closing of these sets of valves. Students are given a description of the pressure change that results in the opening of the AV valves and shown where this would be found on the graph detailing the pressure changes of the cardiac cycle. They then have to use this as a guide to write descriptions for the closing of the AV valve and the opening and closing of the semi-lunar valves and to locate these on the graph. By providing the students with this graph, the next part of the lesson can focus on explaining how these changes come about. Students have to use their current and prior knowledge of the chambers and blood vessels to write 4 descriptions that cover the cardiac cycle. This rest of the lesson focuses on the roles of the SAN and Purkyne fibres as well as the AVN and the bundle of His in the coordination of the heartbeat, continually linking back to the work on the cycle. The SAN is introduced as the natural pacemaker and then time is given to study each step of the conduction of the impulse as it spreads away from the myogenic tissue in a wave of excitation. Moving forwards, students are encouraged to consider why a delay would occur at the AVN and then they will learn that the impulse is conducted along the Bundle of His to the apex so that the contraction of the ventricles can happen from the bottom upwards. The structure of the cardiac muscle cells is discussed and the final task of the lesson challenges the students to describe the conducting tissue, with an emphasis on the use of key terminology.

This lesson describes the reactants and products of the Haber Process and then explores and explains why the specific conditions are chosen for this reaction. The PowerPoint and accompanying worksheets have been designed to cover specification point 10.4.1 of the AQA GCSE Chemistry specification. The summary passage which is completed at the end of the lesson has been differentiated two ways. The lesson begins by challenging the students to use a description of the reaction to complete the balanced symbol equation. A quiz competition involving both Chemistry and Maths skills is used to reveal the temperature and pressure which are chosen for this reaction. Students will learn that this only produces a yield of 30% and therefore are encouraged to question why these conditions are chosen. In doing so, they are made to wear two “hats”, so that they consider it from both a Science angle but also a business angle. Their knowledge of reversible reactions and the effect of changing either the temperature or the pressure on the position of the equilibrium are constantly challenged and then checked through a range of progress check questions. As a result of this lesson, students will understand that these conditions are a compromise and be able to explain why.

This fully-resourced lesson describes the range of potential treatments for kidney failure. The PowerPoint and accompanying resources have been designed to cover specification point (h) in topic 7 of A2 unit 3 of the WJEC A-level Biology specification. This lesson involves the diagnosis of a number of different kidney-related conditions and the potential treatments for kidney failure. This lesson is designed to get the students to take on the numerous roles of a doctor who works in the renal ward which include testing, diagnosis and treatment. Having obtained measurements by GFR and results by taking urine samples, hey are challenged to use their knowledge of the function of the kidney to study urine samples (and the accompanying GP’s notes) to diagnose one of four conditions. They then have to write a letter to the patient to explain how they made this diagnosis, again focusing on their knowledge of the structure and functions of the Bowman’s capsule and PCT. The rest of the lesson focuses on haemodialysis, peritoneal dialysis and kidney transplant. There are regular progress checks throughout the lesson so that students can assess their understanding and there are a number of homework activities included in the lesson.

This lesson describes the inheritance of two genes and guides students through the calculation of phenotypic ratios, before considering linkage. The PowerPoint and the accompanying resources have been designed to cover point [c] in topic 3 of A2 unit 4 of the WJEC A-level Biology specification. As the previous lesson described the construction of genetic crosses and pedigree diagrams, students are aware of the methods involved in writing genotypes and gametes for the inheritance of a single gene. Therefore, the start of this lesson builds on this understanding to ensure that students recognise that genotypes contain 4 alleles and gametes contain 2 alleles when two genes are inherited. The students are taken through the steps of a worked example to demonstrate the key steps in the calculation of a phenotypic ratio before 2 exam-style questions challenge them to apply their newly-acquired knowledge. Mark schemes are displayed within the PowerPoint to allow students to assess their progress. The phenotypic ratio generated as the answer to the next question is 9:3:3:1 and time is taken to explain that this is the expected ratio when two heterozygotes for two unlinked genes are crossed which they may be expected to use when meeting the chi squared test in an upcoming lesson The remainder of the lesson considers how linkage, where two genes have loci on the same chromosome, affects the outcome of dihybrid inheritance. This is a difficult topic which can be poorly understood by students so extra time was taken during the planning to split the concept into small chunks. There is a clear focus on using the number of parent phenotypes and recombinants in the offspring as a way to determine linkage and suggest how the loci of the two genes compare. Important links to other topics such as crossing over in meiosis are made to enable students to understand how the random formation of the point of contact (chiasma) determines whether new phenotypes will be seen in the offspring or not. Linkage is an important cause of variation and the difference between observed and expected results and this is emphasised on a number of occasions and a link to the chi squared test which is covered in an upcoming lesson is also made. The main task of the lesson act as understanding check where students are challenged to analyse the results of genetic crosses involving the inheritance of the ABO blood group gene and the nail-patella syndrome gene n humans and also the inheritance of body colour and wing length in Drosophila.

This lesson guides students through the use of a chi-squared test to determine the significance of the difference between observed and expected results. It is fully-resourced with a detailed PowerPoint and differentiated worksheets that have been designed to cover point (d) in topic 3 of A2 unit 4 of the WJEC A-level Biology specification The lesson includes a step-by-step guide to demonstrates how to carry out the test in small chunks. At each step, time is taken to explain any parts which could cause confusion and helpful hints are provided to increase the likelihood of success in exam questions on this topic. Students will understand how to use the phenotypic ratio to calculate the expected numbers and then how to find the critical value in order to compare it against the chi-squared value. A worked example is used to show the working which will be required to access the marks and then the main task challenges the students to apply their knowledge to a series of questions of increasing difficulty. This lesson has been specifically designed to tie in with the previous lessons in this topic as there are regular references to dihybrid inheritance as well as to topics in the AS units like meiosis

This lesson describes the structure of DNA as a double-stranded polymer coiled into a double helix and focuses on nucleotides as the monomers. The PowerPoint and accompanying resources have been designed to cover the detail of point 3.4 of the Edexcel GCSE Biology & Combined Science specifications. The lesson begins with a reveal of the acronym DNA and students will learn that this stands for deoxyribonucleic acid. There is a focus on the use and understanding of key terminology throughout the lesson so time is taken to look at the meanings of the prefixes poly and mono as well as the suffix -mer. This leads into the description of DNA as a polymer which is made up of many monomers known as nucleotides. Students will be introduced to the three components of a DNA nucleotide and will learn that four different bases can be attached to the sugar. An observational task is used to get them to recognise that DNA consists of two strands and that complementary bases are joined by hydrogen bonds. Understanding checks are interspersed throughout the lesson along with mark schemes so that students can assess their progress

This is a fully-resourced lesson that looks at how pressure can be calculated using force and area and then explores how hydraulics are used to transmit a force through a fluid and challenges the students to apply the given equation to calculate the force or area. The lesson includes a lesson presentation (18 slides) and a question worksheet which has been differentiated two ways. The lesson begins by challenging the students to use an answer to a calculation question to work out the equation that links pressure, force and area. A range of mathematical skills are tested throughout the lesson, such as converting between units and rearranging formula, and then the answers are fully explained so any student who was unable to move through the question can visualise the method. Moving forwards, students will be introduced to a hydraulics system and the equation which they will be given on the sheet in the exam. Students will use the equation to calculate the force or area at the second point of the system. This task has been differentiated so that students who find it difficult are still able to access the learning. This lesson has been written for GCSE aged students

This fully-resourced lesson describes the differences between the roles of the B cells and T cells in the body’s immune response. The PowerPoint and accompanying resources have been designed to cover points 6.9 & 6.10 in unit 4 of the Edexcel International A-level Biology specification and includes descriptions of the role of the antigens and the production of antibodies by plasma (effector) cells In the previous lesson on the non-specific responses, the students were introduced to macrophages and dendritic cells as antigen-presenting cells and the start of this lesson challenges their recall and understanding of this process. Time is taken to discuss how the contact between these cells and lymphocytes is critical for the initiation of the body’s (specific) immune response. Moving forwards, a quick quiz competition is used to introduce the names of the different T cells that result from differentiation. Their specific roles are described including an emphasis on the importance of the release of cytokines in cell signalling to activate other immune system cells. T memory cells are also introduced so that students can understand their role in immunological memory and active immunity as described in an upcoming lesson. The next part of the lesson focuses on the B cells and describes how clonal selection and clonal expansion results in the formation of memory B cells and effector cells. A series of understanding and application questions are then used to introduce the structure of antibodies and to explain how the complementary shape of the variable region allows the antigen-antibody complex to be formed. The lesson concludes by emphasising that the pathogen will be overcome as a result of the combination of the actions of phagocytes, T killer cells and the antibodies released by the effector cells

This fully-resourced lesson describes the action of enzymes as biological catalysts and explains how their specificity is related to their 3D structure. The engaging PowerPoint and accompanying resources have been designed to cover points 2.10 (i) and (ii) of the Pearson Edexcel A-level Biology A specification but also introduces some examples of intracellular and extracellular enzymes to prepare students for the next lesson which covers 2.10 (iii). The lesson has been specifically planned to tie in with related topics that were previously covered such as protein structure, globular proteins and intracellular enzymes. This prior knowledge is tested through a series of exam-style questions along with current understanding and mark schemes are included in the PowerPoint so that students can assess their answers. Students will learn that enzymes are large globular proteins which contain an active site that consists of a small number of amino acids. Emil Fischer’s lock and key hypothesis is introduced to enable students to recognise that their specificity is the result of an active site that is complementary in shape to a single type of substrate. Time is taken to discuss key details such as the control of the shape of the active site by the tertiary structure of the protein. The induced-fit model is described so students can understand how the enzyme-susbtrate complex is stabilised and then students are challenged to order the sequence of events in an enzyme-controlled reaction. The lesson finishes with a focus on ATP synthase and DNA polymerase so that students are aware of these important intracellular enzymes when learning about the details of respiration and DNA replication.

This fully-resourced lesson has been designed to cover the specification point 3.21B (understanding the term co-dominance) as detailed in topic 3 (Reproduction and inheritance) of the Pearson Edexcel IGCSE Biology specification. The lesson uses the inheritance of the ABO blood group system to demonstrate co-dominance. A potentially difficult topic, time has been taken to include guidance sections where students are walked through the interpretation of the different genotypes to find out the phenotypes as well as supporting them through the construction of genetic diagrams and working out the blood groups from pedigree trees. There is a real focus on genetic terminology such as allele, locus, genotype and phenotype so that the understanding is deep and students can use this if they choose to further their studies at A-level. This lesson has been designed for GCSE-aged students studying the Pearson Edexcel IGCSE Biology course but is also suitable for older students who are learning about codominance (and multiple alleles) at A-level

This fully-resourced lesson has been written to prepare students for the range of mathematical-based questions that they may face on the two OCR GCSE Chemistry papers. The lesson has been designed to contain a wide range of activities which includes 8 quiz competition rounds spread across the duration of the lesson to maintain engagement whilst the students assess their understanding. The mathematical skills covered in this lesson include: Calculating the number of sub-atomic particles in atoms and ions Writing chemical formulae for ionic compounds Identifying isotopes Using Avogadro’s constant to calculate the number of particles Calculating the relative formula mass Calculating amount in moles using the mass and the relative formula mass Balancing chemical symbol equations Calculating reacting masses Gas calculations using molar volume Calculating concentration of solutions Titration calculations Deducing the empirical formula Calculating energy changes in reactions Most of the resources have been differentiated two ways to allow students of differing abilities to access the work whilst still being challenged. In addition, step by step guides are used to demonstrate how to carry out some of the more difficult calculations such as the harder mole calculations and calculating masses in reactions This lesson could be used with higher ability students on the OCR GCSE Combined Science course by taking out the sections which are not applicable.