A fully resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within modules B1, B2 and B3 of the OCR Gateway A GCSE Biology specification as will be covered in Biology paper 1 The topics that are tested within the lesson include: Cell structures What happens in cells Respiration Photosynthesis Supplying the cell The challenge of size The nervous system The endocrine system Maintaining internal environments Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require further attention

This is a fully-resourced revision lesson that could be used over a series of lessons to help students to revise and assess their knowledge of the content in topics P1 (Matter), P2 (Forces) and P3 (Electricity and magnetism) of the OCR Gateway A GCSE Combined Science specifiction which can be assessed in paper 5. This revision lesson uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to cover the following sub-topics and specification points: Describe how and why the atomic model has changed over time Describe the structure of the atom and the charges of the particles Define the term specific latent heat Conversions from non S.I. units to S.I. units Explain the vector-scalar distinction Recall examples in which objects interact Represent forces as vectors by drawing free-body diagrams Know the definition of Newton’s three laws of motion Define momentum and describe examples of momentum in collisions Recall and apply Newton’s third law Describe the relationship between force and the extension of a spring Calculate the spring constant in linear cases Define mass and weight Recall that current depends upon both potential difference and resistance Recall and apply the relationship between I, R and V Show that Fleming’s left hand rule represents the relative orientations of current, magnetic field and force This lesson contains a big emphasis on the mathematical calculations that will be involved in these exams, and as a result students are challenged to recall the equations and to apply them. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams. A lot of the tasks have been differentiated so that students of all abilities can access the work and be challenged appropriately.

This is fully-resourced REVISION lesson that contains an engaging PowerPoint (98 slides) and associated differentiated worksheets and has been designed to challenge the students on their knowledge of the content in TOPIC 4 (Electricity and magnetism) of the Cambridge IGCSE Physics specification. The lesson includes a wide range of activities which aim to motivate the students whilst they assess their understanding of the content and recognise those areas which need further attention. The lesson was designed to include as many sub-topics as possible but the following have been given a particular focus: Logic gates Series and parallel circuits and circuit calculations Resistors Diodes and their roles as rectifiers Fleming’s left-hand rule and the motor effect Transformers This lesson is suitable for revision purposes at numerous times of the year, whether it be at the end of the topic or in the lead up the mocks or actual IGCSE exams

This lesson describes the function of transcription factors in eukaryotes and uses the lac operon to explain the control of protein production in a prokaryote. The detailed PowerPoint and accompanying resources have been designed to cover points 16.3 (b, c & d) as detailed in the CIE A-level Biology specification and also includes a description of how gibberellin breaks down DELLA protein repressors, allowing transcription to be promoted. This is one of the more difficult concepts in this A-level course and therefore key points are reiterated throughout this lesson to increase the likelihood of student understanding and to support them when trying to make links to actual biological examples in living organisms. There is a clear connection to transcription and translation as covered in topic 6, so the lesson begins by reminding students that in addition to the structural gene in a transcription unit, there is the promoter region where RNA polymerase binds. Students are introduced to the idea of transcription factors and will understand how these molecules can activate or repress transcription by enabling or preventing the binding of the enzyme. At this point, students are challenged on their current understanding with a series of questions about DELLA proteins so they can see how these molecules prevent the binding of RNA polymerase. Their understanding is then tested again with another example with oestrogen and the ER receptor. The final and main section of the lesson focuses on the lac operon and immediately an opportunity is taken to challenge their knowledge of biological molecules with a task where they have to spot the errors in a passage describing the formation and breakdown of this disaccharide. Students will be able to visualise the different structures that are found in this operon and time is taken to go through the individual functions. A step by step guide is used to walk students through the sequence of events that occur when lactose is absent and when it is present before they are challenged to apply their understanding to an exam question.

This lesson explains the effects of light intensity, carbon dioxide concentration and temperature (limiting factors) on the rate of photosynthesis. The PowerPoint and accompanying resources have been designed to cover points 13.2 (a, b & c) of the CIE A-level Biology specification and also considers how knowledge of these limiting factors can be used to increase crop yields in the protected environment of a greenhouse. The lesson has been specifically written to tie in with the previous lessons in topic 13.1 which covered the structure of the chloroplast, the light-dependent reactions and the light-independent reactions. Exam-style questions are included throughout the lesson and these require the students to explain why light intensity is important for both reactions as well as challenging them on their ability to describe how the relative concentrations of GP, TP and RuBP would change as carbon dioxide concentration decreases. There are also links to previous topics such as enzymes when they are asked to explain why an increase in temperature above the optimum will limit the rate of photosynthesis. Step by step guides are included to support them to form some of the answers and mark schemes are always displayed so that they can quickly assess their understanding and address any misconceptions. The final part of the lesson provides details of the World’s largest rooftop greenhouse in Montreal and challenges their knowledge of related topics such as cellulose structure, pollination and biological control.

This is a highly-detailed revision resource which has been designed to be used over a number of lessons and allows teachers to dip in and out of the material as fits to the requirements of their classes and students. The resource consists of an engaging and detailed powerpoint (148 slides) and worksheets which have been differentiated to allow students of differing abilities to be challenged whilst accessing the work. The lesson consists of a wide range of activities which will engage and motivate the students and includes exam questions, quiz competitions and quick tasks and mathematical skills are challenged throughout. The lesson has been designed to cover as many of the sub-topics within topics 1, 2 and 3 of the OCR Gateway GCSE Biology A specification but the following sub-topics have been given particular attention: Topic B1: Cell-level systems Eukaryotic and prokaryotic cells Respiration Functions of the organelles of animal and plant cells Microscopy and calculating size Topic B2: Scaling up The functions of the components of blood Specialised cells Osmosis Mitosis and the cell cycle The heart and blood vessels Topic B3: Organism-level systems The nervous system The structures and functions of the eye IVF This revision resource can be used in the lead up to mocks or the actual GCSE exams and due to its size, it could be repeatably used to ensure that students develop a deep understanding of these topics.

This lesson describes the light-dependent stage, focusing on photoactivation of chlorophyll, photolysis of water and the production of ATP and reduced NADP. The detailed PowerPoint and accompanying resources have been designed to cover the details of point 13.1 (f) of the CIE A-level Biology specification and also describes cyclic and non-cyclic photophosphorylation The light-dependent stage of photosynthesis is a process which students can find difficult to understand in the necessary detail so this lesson has been planned to walk them through all of the key details. Time is taken to describe the roles of the major protein complexes that are embedded in the thylakoid membrane and this includes the two photosystems, the cytochrome proton pump and ATP synthase. A series of exam-style questions have been written that link to other biological topics in this course such as eukaryotic cell structures and membrane transport as well as application questions to challenge them to apply their understanding. Some of these resources have been differentiated to allow students of differing abilities to access the work and to be pushed at the same time. Students will learn that there are two pathways that the electron can take from PSI and at the completion of the two tasks which describe each of these pathways, they will understand how ATP is generated in non-cyclic and cyclic photophosphorylation. The final task of the lesson asks them to compare these two forms of photophosphorylation to check that they understand when photolysis is involved and reduced NADP is formed. Due to the detail included in this lesson, it is estimated that it will take up to 3 hours of allocated A-level teaching time to complete.

This detailed and fully-resourced lesson describes the relationship between the structure, properties and functions of glycogen, starch and cellulose. The engaging PowerPoint and accompanying resources have been designed to cover specification point 2.2 (e) of the CIE International A-level Biology course and continual links are also made to the previous lessons in this topic where the monosaccharides and disaccharides were introduced. The lesson begins with the CARBOHYDRATE WALL where students have to use their prior knowledge to collect the 9 carbohydrates on show into 3 groups. This results in glycogen, starch and cellulose being grouped together as polysaccharides and the structure, properties and functions of these large carbohydrates are covered over the course of the lesson. Students will learn how key structural features like the 1 - 4 and 1 - 6 glycosidic bonds and the hydrogen bonds dictate whether the polysaccharide chain is branched or unbranched and also dictate whether the chain spirals or not. Following the description of the structure of glycogen, students are challenged to design an exam question in the form of a comparison table so that it can be completed as the lesson progresses and they learn more about starch and cellulose. This includes a split in the starch section of the table so that the differing structures and properties of amylose and amylopectin can be considered. The importance of the compact structure for storage is discussed as well as the branched chains of amylopectin acting as quick source of energy when it is needed. In the final part of the lesson, time is taken to focus on the hydrogen bonds between rotated glucose molecules on the same chain and between different chains and to explain how the formation of cellulose microfibrils and macrofibrils provides plant cells with the additional strength needed to support the whole plant. Due to the detail included in this lesson, it is estimated that it will take in excess of 2 hours of allocated teaching time to complete

This fully-resourced lesson describes how natural selection leads to behavioural, anatomical and physiological adaptations. The PowerPoint and accompanying resources have been designed to cover specification points 4.3 & 4.4 of the Pearson Edexcel A-level Biology A specification President Trump’s error ridden speech about antibiotics is used at the beginning of the lesson to remind students that this is a treatment for bacterial infections and not viruses as he stated. Moving forwards, 2 quick quiz competitions are used to introduce MRSA and then to get the students to recognise that they can use this abbreviation to remind them to use mutation, reproduce, selection (and survive) and allele in their descriptions of evolution through natural selection. The main task of the lesson challenges the students to form a description that explains how this strain of bacteria developed resistance to methicillin to enable them to see the principles of natural selection. This can then be used when describing how the anatomy of the modern-day giraffe has evolved over time. The concept of convergent evolution is introduced and links are made to the need for modern classification techniques as this is covered later in topic 4. Moving forwards, students will understand how natural selection leads to adaptations and a quick quiz competition introduces the different types of adaptation and a series of tasks are used to ensure that the students can distinguish between anatomical, behavioural and physiological adaptations. The Marram grass is used to test their understanding further, before a step by step guide describes how the lignified cells prevent a loss of turgidity. Moving forwards, the students are challenged to explain how the other adaptations of this grass help it to survive in its environment. A series of exam-style questions on the Mangrove family will challenge them to make links to other topics such as osmosis and the mark schemes are displayed to allow them to assess their understanding. The final part of the lesson focuses on the adaptations of the anteater but this time links are made to the upcoming topic of taxonomy so that students are prepared for this lesson on species and classification hierarchy. Due to the extensiveness of this lesson and the detail contained within the resources, it is estimated that it will take in excess of 2 hours of allocated A-level teaching time to deliver this lesson.

This fully-resourced lesson describes the light-dependent stage, including the production of ATP by cyclic and non-cyclic photophosphorylation. The detailed PowerPoint and accompanying resources have been designed to cover specification points 5.7 (ii) & (iii) of the Edexcel A-level Biology course and has been planned to link with the previous lesson on the structure of the chloroplast and to prepare for the next lesson on the light-independent stage. This is a topic which students tend to find difficult so this lesson has been intricately planned to walk them through each of the key steps of the light-dependent stage. Time is taken to describe the roles of the major protein complexes that are embedded in the thylakoid membrane and this includes the two photosystems, the proton pump and ATP synthase. A series of exam-style questions have been written that link to other biological topics in this course such as cell structure and membrane transport as well as application questions to challenge them to apply their understanding. Some of these resources have been differentiated to allow students of differing abilities to access the work and to be pushed at the same time. Students will learn that there are two pathways that the electron can take from PSI and at the completion of the two tasks which describe each of these pathways, they will understand how ATP is generated in non-cyclic and cyclic fashion. The final task of the lesson asks them to compare these two forms of photophosphorylation to check that they understand when photolysis is involved and reduced NADP is formed. Due to the detail included in this lesson, it is estimated that it will take in excess of 2.5 hours of allocated A-level teaching time to complete.

This lesson describes how the Hardy-Weinberg equation can identify changes in allele frequency that can be the result of mutation and natural selection. The detailed PowerPoint and accompanying resources have been designed to cover points 4.20 (i) & (ii) of the Edexcel International A-level Biology specification The lesson begins with a focus on the equation to ensure that the students understand the meaning of each of the terms. The recessive condition, cystic fibrosis, is used as an example so that students can start to apply their knowledge and assess whether they understand which genotypes go with which term. Moving forwards, a step-by-step guide is used to show students how to answer a question. Tips are given during the guide so that common misconceptions and mistakes are addressed immediately and then students are given the opportunity to apply their knowledge to a set of 3 questions, which have been differentiated so that all abilities are able to access the work and be challenged The rest of the lesson focuses on describing how the mutations which create the variation needed for natural selection to occur can be given as reasons for any change in allele frequency. 2 quick quiz competitions are used to introduce MRSA and then to get the students to recognise that they can use this abbreviation to remind them to use mutation, reproduce, selection (and survive) and allele in their descriptions of evolution through natural selection. The main task of the lesson challenges the students to form a description that explains how this strain of bacteria developed resistance to methicillin to enable them to see the principles of natural selection. This can then be used when describing how the anatomy of the modern-day giraffe has evolved over time.

This lesson outlines the need for energy in living organisms, and describes how ATP is formed by phosphorylation in respiration and photosynthesis. The engaging and detailed PowerPoint and accompanying resources have been primarily designed to cover points 12.1 (a, b, c & e) of the CIE A-level Biology specification but can be used as a revision of topics 1, 4 and 6 as the students knowledge of cell structure, membrane transport and ATP is constantly challenged. As this is the first lesson in topic 12 (respiration), it has been specifically planned to act as an introduction to this cellular reaction and provides important details about glycolysis, the Krebs cycle and oxidative phosphorylation that will support the students to make significant progress when these stages are covered during individual lessons. Photophosphorylation is also introduced so students are prepared for the light-dependent reaction of photosynthesis in topic 13. The main focus of the start of the lesson is the demonstration of the need for energy in a variety of reactions that occur in living organisms. Students met ATP in topics 1 and 6, so a spot the errors task is used to check on their recall of the structure and function of this molecule. This will act to remind them that the release of energy from the hydrolysis of ATP can be coupled to energy-driven reactions in the cell such as active transport and a series of exam-style questions are used to challenge them on their knowledge of this form of membrane transport. They will also see how energy is needed for protein synthesis and DNA replication and the maintenance of resting potential, before more questions challenge them to apply their knowledge of cell structure and transport to explain how it is needed during the events at a synapse. The rest of the lesson focuses on the production of ATP by substrate-level, oxidative and photophosphorylation and the students will learn when ATP is formed by each of these reactions and will see how the electron transport chain in the membranes in the mitochondria and chloroplast is involved

This lesson explains the meaning of biodiversity and describes how it can be assessed in a habitat, in a species level at a genetic level and at a molecular level. The engaging PowerPoint and accompanying resources have been designed to cover points (h-l) in AS unit 2, topic 1 of the WJEC A-level Biology specification but as a lot of genetic content is covered when considering diversity within a species, this lesson can be used as an introduction to the upcoming topics of inheritance A quiz competition called BIOLOGICAL TERMINOLOGY SNAP runs over the course of the lesson and this will engage the students whilst challenging them to recognise key terms from their definitions. This quiz introduces biodiversity, loci, allele and recessive and each of these terms is put into context once introduced. Once biodiversity has been revealed, the students will learn that they are expected to be able to assess the biodiversity within a habitat and within a species and at a molecular level. The variety of alleles in the gene pool of a population increases the genetic diversity so a number of examples are used to demonstrate how the number of phenotypes increases with the number of alleles at a locus. The CFTR gene is used to demonstrate how 2 alleles results in 2 different phenotypes and therefore genetic diversity. Moving forwards, students will discover that more than 2 alleles can be found at a locus and they are challenged to work out genotypes and phenotypes for a loci with 3 alleles (shell colour in snails) and 4 alleles (coat colour in rabbits). Moving forwards, a step by step guide to complete a worked example to calculate a value of D using Simpson’s index of diversity. Students are challenged with a range of exam-style questions where they have to apply their knowledge and all mark schemes are displayed and clearly explained within the PowerPoint to allow students to assess their understanding and address any misconceptions if they arise. The final part of the lesson considers how DNA fingerprinting can be used to assess biodiversity at a molecular level and again a series of exam-style questions are used to challenge the students to apply their newly-acquired knowledge to an unfamiliar situation.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the sub-topics found within Topic C8 (Fuels and Earth Science) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: The separation of crude oil into simpler, more useful mixtures by fractional distillation The differing properties of the fractions The complete and incomplete combustion of hydrocarbons The chemical process of cracking The Earth’s early atmosphere Human activity and climate change The composition of today’s atmosphere Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This lesson describes how the nervous system detects stimuli, focusing on the detection of light by the rods in the the retina of mammals. The PowerPoint has been designed to cover the content of specification point 8.8 of the Edexcel International A-level Biology specification and includes descriptions of the roles of rhodopsin, opsin, retinal, sodium ions, cation channels and hyperpolarisation in the formation of action potentials in the optic neurones. The lesson begins by using a quiz to get the students to recognise the range of stimuli which can be detected by receptors. This leads into a task where the students have to form 4 sentences to detail the stimuli which are detected by certain receptors and the energy conversion that happen as a result. Students will be introduced to the idea of a transducer and learn that receptors always convert to electrical energy which is the generator potential. It is likely that students will be aware that the human retina contains rod and cone cells, so the next part of the lesson builds on that knowledge and adds the detail needed at this level. Students will discover that the optical pigment in rod cells is rhodopsin and that the bleaching of this into retinal and opsin results in a cascade of events that allows an action potential to be initiated along the optic nerve. Time is taken to go through the events that occur in the dark and then the students are challenged to use this as a guide when explaining how the events differ in the light. Key terms like depolarisation and hyperpolarisation, that were met earlier in topic 8, are used to explain the changes in membrane potential and the resulting effect on the connection with the bipolar and ganglion cells is then described. The remainder of the lesson focuses on the Pacinian corpuscle and describes how this responds to pressure on the skin, resulting in the opening of the sodium channels and the flow of sodium ions into the neurone to cause depolarisation

This lesson describes the biuret and emulsion tests for proteins and lipids respectively and then acts as a revision lesson for topics 2.2 and 2.3. The engaging PowerPoint and accompanying resources have been designed to be taught at the end of topic 2 and uses a range of activities to challenge the students on their knowledge of that topic, but also covers the second part of point 2.1 (a) of the CIE A-level Biology specification when the qualitative tests are described. The first section of the lesson describes the steps in the biuret test and challenges the students on their recall of the reducing sugars and starch tests from topic 2.1 to recognise that this is a qualitative test that begins with the sample being in solution. The students will learn that the addition of sodium hydroxide and then copper sulphate will result in a colour change from light blue to lilac if a protein is present. The next part of the lesson uses exam-style questions with displayed mark schemes, understanding checks and quick quiz competitions to engage and motivate the students whilst they assess their understanding of this topic. The following concepts are tested during this lesson: The general structure of an amino acid The formation of dipeptides and polypeptides through condensation reactions The primary, secondary, tertiary and quaternary structure of a protein Biological examples of proteins and their specific actions (e.g. antibodies, enzymes, peptide hormones) Moving forwards, the lesson describes the key steps in the emulsion test for lipids, and states the positive result for this test. There is a focus on the need to mix the sample with ethanol, which is a distinctive difference to the tests for reducing sugars and starch and proteins. The remainder of the lesson uses exam-style questions with mark schemes embedded in the PowerPoint, understanding checks, guided discussion points and quick quiz competitions to challenge the following specification points: The structure of a triglyceride The relationship between triglyceride property and function The hydrophilic and hydrophobic nature of the phospholipid The phospholipid bilayer of the cell membrane Cholesterol is also introduced so that the students are prepared for this molecule when it is met in topic 4 (cell membranes) This is an extensive lesson and it is estimated that it will take in excess of 2 hours of allocated teaching time to cover the detail and the different tasks

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quiz tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Properties of waves, including light and sound) of the Cambridge IGCSE Physics (0625) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: Give the meaning of the terms speed, frequency, wavelength and amplitude Distinguish between longitudinal and transverse waves and be able to give suitable examples of each Recall and use the equation velocity = frequency x wavelength Describe how waves can undergo reflection, refraction and diffraction Describe how wavelength affects diffraction Describe an experimental demonstration of the refraction of light Be able to define refractive index and recall the equation to calculate Give the meaning of the critical angle and recall the equation to calculate Describe total internal reflection and be able to explain the use of optical fibres in medicine The electromagnetic spectrum Describe the longitudinal nature of sound waves State the approximate range of audible frequencies for a healthy human Show an understanding of the term ultrasound Describe an experiment to determine the speed of sound in air The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to decide if a passage is 100% factually correct or not whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams.

This fully-resourced lesson describes how enzymes function intracellularly and extracellularly and explains their mode of action. The engaging PowerPoint and accompanying resources have been designed to cover points 3.1 (a, b & c) and considers the details of Fischer’s lock and key hypothesis and Koshland’s induced-fit model and explains how an enzyme’s specificity is related to their 3D structure and enables them to act as biological catalysts. The lesson has been planned to tie in with topic 2.3, and to challenge the students on their knowledge of protein structure and globular proteins. This prior knowledge is tested through a series of exam-style questions along with current understanding and mark schemes are included in the PowerPoint so that students can assess their answers. Students will learn that enzymes are large globular proteins which contain an active site that consists of a small number of amino acids. Emil Fischer’s lock and key hypothesis is introduced to enable students to recognise that their specificity is the result of an active site that is complementary in shape to a single type of substrate. Time is taken to discuss key details such as the control of the shape of the active site by the tertiary structure of the protein. The induced-fit model is described so students can understand how the enzyme-susbtrate complex is stabilised and then students are challenged to order the sequence of events in an enzyme-controlled reaction. The lesson finishes with a focus on ATP synthase and DNA polymerase so that students are aware of these important intracellular enzymes when learning about the details of respiration and DNA replication before they are challenged on their knowledge of carbohydrates, lipids and proteins from topics 1.2 - 1.4 as they have to recognise some extracellular digestive enzymes from descriptions of their biological molecule substrates.

This is a fully-resourced REVISION lesson that consists of an engaging PowerPoint (129 slides) and associated worksheets that challenge the students on their knowledge of topics 4 - 6 (Community-level systems, Interaction between systems and Global challenges) of the OCR Gateway A GCSE Combined Science specification and can be assessed on PAPER 2. A wide range of activities have been written into the lesson to maintain motivation and these tasks include exam questions (with answers), understanding checks, differentiated tasks and quiz competitions. The lesson has been designed to include as much which of the content from topic 1, but the following sub-topics have been given particular attention: Identifying bacterial, fungal and viral diseases The steps in the process of genetic engineering Evolution by natural selection The development of antibiotic resistance in bacteria The prevention and reduction of the spread of pathogens Vaccinations The risk factors of CHD Genetic terminology Predicting the results of single-gene crosses Sex determination Ecological terms The carbon cycle The mathematic elements of the Combined Science specification are challenged throughout the resource. Due to the size of this resource, it is likely that it’ll be used over the course of a number of lessons and it is suitable for use as an end of topic revision aid, in the lead up to the mocks or in the lead up to the actual GCSE exams.