This detailed lesson describes how the movement of water molecules by osmosis can affect both plant and animal cells. Both the PowerPoint and accompanying resources have been designed to cover specification point 2.1.5 (e) [i] as detailed in the OCR A-level Biology A specification and there is a particular focus on solutions of different water potentials. It’s likely that students will have used the term concentration in their osmosis definitions at GCSE, so the aim of the starter task is to introduce water potential to allow students to begin to recognise osmosis as the movement of water molecules from a high water potential to a lower potential, with the water potential gradient. Time is taken to describe the finer details of water potential to enable students to understand that 0 is the highest value (pure water) and that this becomes negative once solutes are dissolved. Exam-style questions are used throughout the lesson to check on current understanding as well as prior knowledge checks which make links to previously covered topics such as the lipid bilayer of the cell membrane. The remainder of the lesson focuses on the movement of water when animal and plant cells are suspended in hypotonic, hypertonic or isotonic solutions and the final appearance of these cells is described, including any issues this may cause. This lesson has been specifically written to tie in with the previous two lessons covering 2.1.5 (b) & (d) where the cell membrane, diffusion and active transport were described.

This lesson describes the differences between the primary and secondary responses and describes how the structure of antibodies is related to function. The PowerPoint and accompanying resources have been designed to cover specification points 4.1.1 (g), (h) and (i) as detailed in the OCR A-level Biology A specification and emphasises the importance of memory cells. As memory B cells differentiate into plasma cells that produce antibodies when a specific antigen is re-encountered, it was decided to link the immune responses and antibodies together in one lesson. The lesson begins by checking on the students incoming knowledge to ensure that they recognise that B cells differentiate into plasma cells and memory cells. This was introduced in a previous lesson on the specific immune response and students must be confident in their understanding if the development of immunity is to be understood. A couple of quick quiz competitions are then used to introduce key terms so that the structure of antibodies in terms of polypeptide chains, variable and constant regions and hinge regions are met. Time is taken to focus on the variable region and to explain how the specificity of this for a particular antigen allows neutralisation and agglutination to take place. The remainder of the lesson focuses on the differences between the primary and secondary immune responses and a series of exam-style questions will enable students to understand that the quicker production of a greater concentration of these antibodies in the secondary response is due to the retention of memory cells.

This lesson describes the structure and mode of action of phagocytes and focuses on the neutrophils and macrophages as APCs. The engaging and detailed PowerPoint and accompanying resources have been designed to cover point 4.1.1 (e) [i] of the OCR A-level Biology A specification and also includes an introduction to antigen-presentation so that the students are prepared for the next lesson on the specific immune response At the start of the lesson, the students are challenged to recall that cytosis is a suffix associated with transport mechanisms and this introduces phagocytosis as a form of endocytosis which takes in pathogens and foreign particles. This emphasis on key terminology runs throughout the course of the lesson and students are encouraged to consider how the start or end of a word can be used to determine meaning. The process of phagocytosis is then split into 5 key steps and time is taken to discuss the role of opsonins as well as the fusion of lysosomes and the release of lysozymes. A series of application questions are used to challenge the students on their ability to make links to related topics including an understanding of how the hydrolysis of the peptidoglycan wall of a bacteria results in lysis. Students will be able to distinguish between neutrophils and monocytes from a diagram and at this point, the role of macrophages and dendritic cells as antigen-presenting cells is described so that it can be used in the next lesson. The lesson concludes with a brief introduction to lymphocytes so that initial links between phagocytosis and the specific immune response is made.

This lesson describes the light-dependent stage of photosynthesis and focuses on the mechanisms involved in the production of ATP and reduced NADP. The detailed PowerPoint and accompanying resources have been designed to cover the details of point 5.2.1 (d) of the OCR A-level Biology A specification and has been specifically planned to link with the previous lesson on the structure of the chloroplast and photosynthesis and to prepare the students for the next lesson on the light-independent stage. The light-dependent stage is a process which students can find difficult to understand in the necessary detail so this lesson has been planned to walk them through all of the key details. Time is taken to describe the roles of the major protein complexes that are embedded in the thylakoid membrane and this includes the two photosystems, the cytochrome proton pump and ATP synthase. A series of exam-style questions have been written that link to other biological topics in this course such as eukaryotic cell structures and membrane transport as well as application questions to challenge them to apply their understanding. Some of these resources have been differentiated to allow students of differing abilities to access the work and to be pushed at the same time. Students will learn that there are two pathways that the electron can take from PSI and at the completion of the two tasks which describe each of these pathways, they will understand how ATP is generated in non-cyclic and cyclic photophosphorylation. The final task of the lesson asks them to compare these two forms of photophosphorylation to check that they understand when photolysis is involved and reduced NADP is formed. Due to the detail included in this lesson, it is estimated that it will take in excess of 2.5 hours of allocated A-level teaching time to complete.

This fully-resourced lesson describes the series of reactions in the light- independent stage of photosynthesis. The detailed PowerPoint and accompanying resources have been designed to cover the details of point 5.2.1 (e) of the OCR A-level Biology A specification and detailed planning includes continual links to the previous lesson on the light-dependent stage to ensure that students recognise how the products of that stage, ATP and reduced NADP, are essential for the Calvin cycle The lesson begins with an existing knowledge check where the students are challenged to recall the names of structures, substances and reactions from the light-dependent stage in order to reveal the abbreviations of the main 3 substances in the light-independent stage. This immediately introduces RuBP, GP and TP and students are then shown how these substances fit into the cycle. The main section of the lesson focuses on the three phases of the Calvin cycle and time is taken to explore the key details of each phase and includes: The role of RuBisCO in carbon fixation The role of the products of the light-dependent stage, ATP and reduced NADP, in the reduction of GP to TP The use of the majority of the TP in the regeneration of RuBP A step-by-step guide, with discussion points where the class consider selected questions, is used to show how 6 turns of the cycle are needed to form the TP that will then be used to synthesise 1 molecule of glucose. A series of exam-style questions are included at appropriate points of the lesson and this will introduce limiting factors as well as testing their ability to answer questions about this stage when presented with an unfamiliar scientific investigation. The mark schemes are included in the PowerPoint so students can assess their understanding and any misconceptions are immediately addressed.

This lesson explains the effects of temperature increases on enzyme activity and describes how to calculate the temperature coefficient. The PowerPoint and the accompanying resource are part of the second lesson in a series of 3, which cover the content detailed in point 2.1.4 (d) [i] of the OCR A-level Biology A specification and this lesson has been specifically planned to tie in with an earlier lesson covering 2.1.4 (a, b & c) where the roles and mechanism of action of enzymes were introduced. The lesson begins by challenging the students to recognise optimum as a key term from its 6 synonyms that are shown on the board. Time is taken to ensure that the students understand that the optimum temperature is the temperature at which the most enzyme-product complexes are produced per second and therefore the temperature at which the rate of an enzyme-controlled reaction works at its maximum. The optimum temperatures of DNA polymerase in humans and in a thermophilic bacteria and RUBISCO in a tomato plant are used to demonstrate how different enzymes have different optimum temperatures and the roles of the latter two in the PCR and photosynthesis are briefly described to prepare students for these lessons in modules 6 and 5. Moving forwards, the next part of the lesson focuses on enzyme activity at temperatures below the optimum and at temperatures above the optimum. Students will understand that increasing the temperature increases the kinetic energy of the enzyme and substrate molecules, and this increases the likelihood of successful collisions and the production of enzyme-substrate and enzyme-product complexes. When considering the effect of increasing the temperature above the optimum, continual references are made to the previous lesson and the control of the shape of the active site by the tertiary structure. Students will be able to describe how the hydrogen and ionic bonds in the tertiary structure are broken by the vibrations associated with higher temperatures and are challenged to complete the graph to show how the rate of reaction decreases to 0 when the enzyme has denatured. The final part of the lesson introduces the Q10 temperature coefficient and students are challenged to apply this formula to calculate the value for a chemical reaction and a metabolic reaction to determine that enzyme-catalysed reactions have higher rates of reaction Please note that this lesson has been designed specifically to explain the relationship between the change in temperature and the rate of enzyme activity in a reaction and not the practical skills that is part of a lesson covering specification point 2.1.4 (d) [ii]

This lesson describes how to use and manipulate the magnification formula to calculate the magnification or the actual size in a range of units. The PowerPoint and accompanying resources have been designed to cover point 2.1.1 (e) of the OCR A-level Biology A specification and contains a number of quiz rounds as part of the competition that runs throughout all of the module 2.1.1 lessons The students are likely to have met the magnification formula at GCSE so this lesson has been written to build on that knowledge and to support them with more difficult questions when they have to calculate actual size without directly being given the magnification. A step by step guide is used to walk the students through the methodology and useful tips are provided. Students could be asked to calculate the actual size in millimetres, micrometres, nanometres or picometres so time is taken to ensure that they can convert between one and another.

This fully-resourced lesson describes the ultrastructure of eukaryotic cells and the functions of the different cellular components. The engaging and detailed PowerPoint and accompanying resources have been designed to cover points 2.1.1 (g) & (i) of the OCR A-level Biology A specification and therefore also describes the interrelationship between the organelles involved in the production and secretion of proteins. As cells are the building blocks of living organisms, it makes sense that they would be heavily involved in all 6 modules in the OCR course and intricate planning has ensured that links to the lessons earlier in module 2.1.1 are made as well as to the upcoming modules. The lesson uses a wide range of activities, that include exam-style questions, class discussion points and quick quiz competitions, to maintain motivation and engagement whilst describing the relationship between the structure and function of the following organelles: nucleus nucleolus centrioles ribosomes rough endoplasmic reticulum Golgi apparatus lysosomes smooth endoplasmic reticulum mitochondria cell surface membrane vacuole chloroplasts plasmodesmata Details of the cilia and flagella are covered in the lesson on the importance of the cytoskeleton. All of the worksheets have been differentiated to support students of differing abilities whilst maintaining challenge Due to the detail that is included in this lesson, it is estimated that it will take in excess of 3 hours of allocated A-level teaching time to go through all of the tasks

This fully-resourced lesson uses real-life examples in plants and animals to explain why cellular respiration is so important. The PowerPoint and accompanying resources have been designed to cover point 5.2.2 (a) of the OCR A-level Biology A specification but can also be used as a revision tool to challenge the students on their knowledge of active transport, nervous transmission and muscle contraction. As the first lesson in this module, it has been specifically planned to act as an introduction to this cellular reaction and provides important details about glycolysis, the Krebs cycle and oxidative phosphorylation that will support the students to make significant progress when these stages are covered during individual lessons. Students met phosphorylation in module 5.2.1 when considering the light-dependent reactions of photosynthesis and their knowledge of the production of ATP in this plant cell reaction is called on a lot in this lesson to show the similarities. The students are also tested on their recall of the structure and function of ATP, as covered in module 2.1.3, through a spot the errors task. By the end of the lesson, the students will be able to explain why the ATP produced in cellular respiration is needed by root hair cells, by companion cells and in the selective reabsorption of glucose in the proximal convoluted tubule. They will also be able to name and describe the different types of phosphorylation and will know that ATP is produced by substrate-level phosphorylation in glycolysis and the Krebs cycle and by oxidative phosphorylation in the final stage of aerobic respiration with the same name.

This fully-resourced lesson describes genetic biodiversity as the number of genes in a population and considers how it can be assessed. The engaging PowerPoint and accompanying differentiated resources have been primarily designed to cover point 4.2.1 (e) of the OCR A-level Biology A specification but also introduces inheritance and codominance so that students are prepared for these genetic topics when they are covered in module 6.1.2 In order to understand that 2 or more alleles can be found at a gene loci, students need to be confident with genetic terminology. Therefore the start of the lesson focuses on key terms including gene, locus, allele, recessive, genotype and phenotype. A number of these will have been met at GCSE, as well as during the earlier lessons in module 2.1.3 when considering meiosis, so a quick quiz competition is used to check on their recall of the meanings of these terms. The CFTR gene is then used as an example to demonstrate how 2 alleles results in 2 different phenotypes and therefore genetic diversity. Moving forwards, students will discover that more than 2 alleles can be found at a locus and they are challenged to work out genotypes and phenotypes for a loci with 3 alleles (shell colour in snails) and 4 alleles (coat colour in rabbits). Two calculations are provided to the students that can calculate the % of loci with more than one allele and the proportion of polymorphic gene loci. At this point, the students are introduced to codominance and again they are challenged to apply their understanding to a new situation by working out the number of phenotypes in the inheritance of blood groups. The lesson concludes with a brief consideration of the HLA gene loci, which is the most polymorphic loci in the human genome, and students are challenged to consider how this sheer number of alleles can affect the chances of tissue matches in organ transplantation

This lesson describes the chemical tests for proteins, reducing and non-reducing sugars, starch and lipids and explains how to interpret the results. The PowerPoint and accompanying resource have been designed to cover point 2.1.2 (q) of the OCR A-level Biology A specification. The lesson begins with an explanation of the difference between a qualitative and quantitative test so that the students recognise that the four tests described within this lesson indicate the presence of a substance but not how much. The students are likely to have met these tests at GCSE so this lesson has been planned to build on that knowledge and to add the knowledge needed at this level. A step by step guide walks the students through each stage of the tests for reducing and non-reducing sugars and application of knowledge questions and prior knowledge checks are included at appropriate points to ensure understanding is complete. Time is also taken to ensure that students understand the Science behind the results. The next part of the lesson focuses on the iodine test for starch and the students will learn that the colour change is the result of the movement of an ion into the amylose helix. The rest of the lesson describes the steps in the biuret test for proteins and the emulsion test for lipids. The students will learn that the addition of sodium hydroxide and then copper sulphate will result in a colour change from light blue to lilac if a protein is present and that following the addition of a sample to ethanol and then water, a cloudy emulsion is observed if a lipid is present.

This fully-resourced lesson describes the movement of molecules by active transport, endocytosis and exocytosis, which are all active process that require ATP. The PowerPoint and accompanying worksheets have been designed to cover the second part of point 2.1.5 (d) [i] of the OCR A-level Biology A specification. The first part of this specification point, concerning simple and facilitated diffusion, was covered in the previous lesson. The start of the lesson challenges the students to use their prior knowledge of biological molecules to come up with the abbreviation ATP. Students were introduced to this molecule in module 2.1.3, so a series of prior knowledge questions are used to check on their recall of the structure and properties of ATP. Students are also reminded that the hydrolysis of ATP can be coupled to energy-requiring reactions within the cell and the rest of the lesson focuses on the use of this energy input for active transport, endocytosis and exocytosis. Students are challenged to answer a series of questions which compare active transport against the forms of passive transport and to use data from a bar chart to support this form of transport. In answering these questions they will discover that carrier proteins are specific to certain molecules and time is taken to look at the exact mechanism of these transmembrane proteins. A quick quiz round introduces endocytosis and the students will see how vesicles are involved along with the energy source of ATP to move large substances in or out of the cell. The lesson concludes with a link to a future topic as the students are shown how exocytosis is involved in a synapse.

This fully-resourced lesson describes the structure, different roles and modes of action of the B and T lymphocytes in the specific immune response. The detailed PowerPoint and accompanying resources have been designed to cover point 4.1.1 (f) as detailed in the OCR A-level Biology A specification and the structure of antibodies and the roles of memory cells is also briefly introduced so that students are prepared for an upcoming lesson on the secondary immune response (4.1.1 g) Antigen presentation was introduced at the end of the previous lesson so the task at the start of this lesson challenges students to recognise the name of this process and then they have to spot the errors in the passage that describes the details of this event. This reminds them that contact between the APC and T lymphocytes is necessary to elicit a response which they will come to recognise as the cellular response. A series of quick quiz rounds reveals key terms in a memorable way and one that is introduced is helper T cells. Time is then taken to describe the importance of cell signalling for an effective response and students will learn how the release of chemicals by these cells activates other aspects of the response. The role of the killer T cells and their production of cytotoxins is also described before an exam-style question is used to check on their understanding at this point of the lesson. This leads into the section of the lesson that deals with the humoral response and students will understand how this involves the antibodies that are produced by the plasma cells that are the result of clonal selection and expansion. The T and B memory cells are also introduced so that students can understand how they are retained in the body even after the pathogen has been overcome and will play a critical role in the development of immunity. The remainder of the lesson focuses on the role of the antibodies and the attachment of phagocytes to opsonins

This fully-resourced revision lesson uses a range of activities to challenge the students on their knowledge of proteins from module 2.1.2. The engaging PowerPoint and accompanying resources have been designed to test the intricate details of specification points 2.1.2 (k), (l), (m), (n), (o) & (q) The range of activities include exam-style questions with displayed mark schemes, understanding checks and quick quiz competitions that will engage and motivate the students whilst they assess their understanding of this topic. The following concepts are tested during this lesson: The general structure of an amino acid The formation of dipeptides and polypeptides through condensation reactions The primary, secondary, tertiary and quaternary structure of a protein Biological examples of proteins and their specific actions (e.g. antibodies, enzymes, peptide hormones) The biuret test for proteins Time has been taken in the planning to make links to topics in upcoming modules such as the genetic code (2.1.3) and intracellular enzymes (2.1.4)

This lesson introduces the key inorganic ions that are involved in biological processes and includes cations and anions. The engaging PowerPoint and accompanying resources have been designed to cover point 2.1.2 § of the OCR A-level Biology A specification but also makes links to topics in upcoming modules such as respiration, photosynthesis and neuronal communication. The roles of the following ions are covered in this lesson: phosphate nitrate chloride hydroxide hydrogencarbonate hydrogen ammonium sodium potassium calcium Extra time is taken during the lesson to describe how these ions are involved in the transport of carbon dioxide, the conduction of nervous impulses and blood clotting as well as other processes and a number of quiz competitions have been included to introduce key terms in a fun and memorable way

This fully-resourced lesson describes the regulatory mechanisms that control gene expression at a transcriptional level. The detailed PowerPoint and accompanying resources have been designed to cover the first part of point 6.1.1 (b) as detailed in the OCR A-level Biology A specification which states that the students knowledge should include the lac operon and examples of transcription factors in eukaryotes. . This is one of the more difficult concepts in this A-level course and therefore key points are reiterated throughout this lesson to increase the likelihood of student understanding and to support them when trying to make links to actual biological examples in living organisms. There is a clear connection to transcription and translation as covered in module 2.1.3, so the lesson begins by reminding students that in addition to the structural gene in a transcription unit, there is the promotor region where RNA polymerase binds. Students are introduced to the idea of transcription factors and will understand how these molecules can activate or repress transcription by enabling or preventing the binding of the enzyme. At this point, students are challenged on their current understanding with a series of questions about DELLA proteins so they can see how these molecules prevent the binding of RNA polymerase. Their understanding is then tested again with another example with oestrogen and the ER receptor. The final and main section of the lesson focuses on the lac operon and immediately an opportunity is taken to challenge their knowledge of biological molecules with a task where they have to spot the errors in a passage describing the formation and breakdown of this disaccharide. Students will be able to visualise the different structures that are found in this operon and time is taken to go through the individual functions. A step by step guide is used to walk students through the sequence of events that occur when lactose is absent and when it is present before they are challenged to apply their understanding to an exam question.

This fully-resourced lesson describes the components of the chloroplast, focusing on the grana and stroma as the sites of photosynthesis. The engaging PowerPoint and accompanying resources have been designed to cover point 5.2.1 (b) of the OCR A-level Biology A specification and has been specifically designed to introduce students to the light-dependent and light-independent stages before they are covered in detail in upcoming lessons. Students were introduced to eukaryotic cells and their organelles structures in module 2.1.1 so this lesson has been written to test and to build on that knowledge. A version of the quiz show POINTLESS runs throughout the lesson and this maintains engagement whilst challenging the students to recall the parts of the chloroplast based on a description which is related to their function. The following structures are covered in this lesson: double membrane thylakoids (grana) stroma intergranal lamellae starch grains chloroplast DNA and ribosomes Once each structure has been recalled, a range of activities are used to ensure that key details are understood such as the role of the thylakoid membranes in the light-dependent reactions and the importance of ATP and reduced NADP for the reduction of GP to TP in the Calvin cycle. Links to other topics are made throughout and this is exemplified by the final task of the lesson where students are challenged on their recall of the structure, properties and function of starch (as originally covered in module 2.1.2)

This fully-resourced lesson describes the relationship between the properties and functions of the fibrous proteins, collagen, keratin and elastin. The detailed PowerPoint and accompanying resources have been designed to cover point 2.1.2 (o) of the OCR A-level Biology A specification but also make links to upcoming topics such as blood vessel structure and the immune system as well as constantly challenging students on their knowledge of proteins from earlier in this module. The lesson begins by challenging the students to recognise 7 structures found in animals from their descriptions and once they’ve written feathers, cartilage, bones, arteries, tendons, callus and skin into the right places, they will reveal the term fibrous and learn that these types of protein are found in these structures. Using their knowledge of the properties of globular proteins, they will learn that the insolubility of fibrous proteins allows them to form fibres, which perform structural functions. The rest of the lesson focuses on the functions of collagen, keratin and elastin and time is taken to discuss the key details and to make links to future topics so that students can recognise the importance of cross-modular based answers. A series of exam-style questions are used to challenge their knowledge of protein structure as well as their ability to apply their knowledge to an unfamiliar situation when learning that elastin is found in the walls of the urinary bladder. All of the questions have mark schemes embedded into the PowerPoint to allow them to immediately assess their understanding. This lesson has been specifically planned to tie in with the previous lesson on globular proteins as well as the one preceding that on the structures of proteins