Non-communicable diseases lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. There is a strong overlap between this lesson and B5-health to revise what was taught before summer. Includes: slide animations, AQA spec link: 4.2.2.6 Relevant chapter: B7 Non-communicable diseases. AQA Biology combined textbook-Page 100-101 Specification requires students to know the following; Risk factors are linked to an increased rate of a disease. •aspects of a person’s lifestyle •substances in the person’s body or environment. A causal mechanism has been proven for some risk factors, but not in others. •Carcinogens, including ionising radiation, as risk factors in cancer. Many diseases are caused by the interaction of a number of factors.

Osmosis lesson created in accordance to the NEW AQA Specification (9-1). I have also included the required practical lesson I created, it includes pictures of each method, sample data and a graph. Designed for a higher ability separates class, although content can be adjusted to suit any ability. Includes: slide animations, practice questions with answers on slides, worksheet. AQA spec link: 4.1.3.2 Relevant chapter: B1 Cell structure and transport. AQA Biology third edition textbook-Page 16-17 Specification requires students to know the following; Water may move across cell membranes via osmosis. Osmosis is the diffusion of water from a dilute solution to a concentrated solution through a partially permeable membrane. Recognise, draw and interpret diagrams that model osmosis. Students should be able to: •use simple compound measures of rate of water uptake ••use percentages • calculate percentage gain and loss of mass of plant tissue. Required practical activity 3: investigate the effect of a range of concentrations of salt or sugar solutions on the mass of plant tissue. AT skills covered by this practical activity: AT 1, 3 and 5. This practical activity also provides opportunities to develop WS and MS. Details of all skills are given in Students should be able to plot, draw and interpret appropriate graphs

C10-Chemical analysis-Gas test lesson created in accordance to the NEW AQA Specification (9-1). Designed for a low ability year 11 class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides as well as method for each test. I strongly recommend that you allow your students to practice the Hydrogen pop test (if they're good), went down really well with my class and was easy for them to recall the method in the class test they did. The rest of the tests can be demonstrated fairly easily and personally getting each student to do every test would've taken me well over an hour. AQA spec link: 5.8.2.1-4 The test for hydrogen uses a burning splint held at the open end of a test tube of the gas. Hydrogen burns rapidly with a pop sound. The test for oxygen uses a glowing splint inserted into a test tube of the gas. The splint relights in oxygen. The test for carbon dioxide uses an aqueous solution of calcium hydroxide (lime water). When carbon dioxide is shaken with or bubbled through limewater the limewater turns milky (cloudy). The test for chlorine uses litmus paper. When damp litmus paper is put into chlorine gas the litmus paper is bleached and turns white.

C10-Chemical analysis-Chromatography required practical lesson created in accordance to the NEW AQA Specification (9-1). Designed for a low ability year 11 class, although content can be adjusted to suit any ability. Includes: slide animations, and practice questions with answers on slides. *I have not included the theory of chromatography in this lesson* AQA spec link: Students should be able to tell the difference between coloured substances. Students should calculate Rf values. AT skills covered by this practical activity: chemistry AT 1 and 4. This practical activity also provides opportunities to develop WS and MS. Details of all skills are given in Key opportunities for skills development.

C10-Chemical analysis-Pure substances and mixtures lesson created in accordance to the NEW AQA Specification (9-1). Designed for a low ability year 11 class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides as well as a interactive review task. If for any reason the video link does not work, a URL has also been included in the notes. AQA spec link: 5.8.1.1 and 5.8.1.2 In chemistry, a pure substance is a single element or compound, not mixed with any other substance. Pure elements and compounds melt and boil at specific temperatures. Melting point and boiling point data can be used to distinguish pure substances from mixtures. In everyday language, a pure substance can mean a substance that has had nothing added to it, so it is unadulterated and in its natural state, eg pure milk. Students should be able to use melting point and boiling point data to distinguish pure from impure substances. Many products are complex mixtures in which each chemical has a particular purpose. Formulations are made by mixing the components in carefully measured quantities to ensure that the product has the required properties. Formulations include fuels, cleaning agents, paints, medicines, alloys, fertilisers and foods. Students should be able to identify formulations given appropriate information. Students do not need to know the names of components in proprietary products.

Diffusion lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability separates class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides, worksheet. Due to the size of this topic, exchanging materials and surface area will be taught in a separate lesson. AQA spec link: 4.1.3.1 Relevant chapter: B1 Cell structure and transport. AQA Biology third edition textbook-Page 14-15 Specification requires students to know the following; Substances may move into and out of cells across the cell membranes via diffusion. Diffusion is the spreading out of the particles of any substance in solution, or particles of a gas, resulting in a net movement from an area of higher concentration to an area of lower concentration. Some of the substances transported in and out of cells by diffusion are oxygen and carbon dioxide in gas exchange, and of the waste product urea from cells into the blood plasma for excretion in the kidney. Students should be able to explain how different factors affect the rate of diffusion. Factors which affect the rate of diffusion are: •• the difference in concentrations (concentration gradient) •• the temperature •• the surface area of the membrane.

Balancing equations part 1 lesson created in accordance to the Pearsons BTEC national specification for applied science. This topic is covered in unit 1 chemistry-Periodicity and properties of elements. This new specification requires students to sit an externally assessed examination in January. Includes slide animations, worksheets, homework and practice questions with answers on slides. Relevant chapter: Principles and applications of science. Pearson Applied science (Student 1) textbook-Page 14-15

Intermolecular forces/electronegavtivity lesson created in accordance to the Pearsons BTEC national specification for applied science. This topic is covered in unit 1 chemistry-Periodicity and properties of elements. This new specification requires students to sit an externally assessed examination in January. Includes slide animations, worksheets, homework and practice questions with answers on slides. Relevant chapter: Principles and applications of science. Pearson Applied science (Student 1) textbook-Page 11-14 The specification requires students to know the following: Understand the following intermolecular forces van der Waals dipole-dipole hydrogen bonding.

Metallic bonding lesson created in accordance to the Pearsons BTEC national specification for applied science. This topic is covered in unit 1 chemistry-Periodicity and properties of elements. This new specification requires students to sit an externally assessed examination in January. Includes slide animations, worksheets, homework and practice questions with answers on slides. Relevant chapter: Principles and applications of science. Pearson Applied science (Student 1) textbook-Page 10-11 The specification requires students to know the following: Understand metallic bonding de-localised electrons positive metal ions regular layer structure.

Covalent bonding lesson created in accordance to the Pearsons BTEC national specification for applied science. This topic is covered in unit 1 chemistry-Periodicity and properties of elements. This new specification requires students to sit an externally assessed examination in January. Includes slide animations and practice questions with answers on slides. Relevant chapter: Principles and applications of science. Pearson Applied science (Student 1) textbook-Page 9-10 The specification requires students to know the following: Understand covalent bonding strong electrostatic attraction between two nuclei and the shared pair(s) of electrons between them dot and cross diagrams to show electrons in simple covalent molecules, including those with multiple bonds and dative covalent (coordinate) bonds the relationship between bond lengths and bond strengths in covalent bonds tetrahedral basis of organic chemistry

Card sort activity. Great AfL in a starter activity.

Specialisation in plant cells lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides, card sort activity and display slides. AQA spec link: 1.1.3 Relevant chapter: B1 Cell structure and transport. AQA Biology third edition textbook-Page 12-13 Specification requires students to know the following; Students should be able to, when provided with appropriate information, explain how the structure of different types of cell relate to their function in a tissue, an organ or organ system, or the whole organism. Cells may be specialised to carry out a particular function: root hair cells, xylem and phloem cells in plants.

Specialisation in animal cells lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides. AQA spec link: 1.1.3 Relevant chapter: B1 Cell structure and transport. AQA Biology third edition textbook-Page 10-11 Specification requires students to know the following; Students should be able to, when provided with appropriate information, explain how the structure of different types of cell relate to their function in a tissue, an organ or organ system, or the whole organism. Cells may be specialised to carry out a particular function: •• sperm cells, nerve cells and muscle cells in animals

Developing drugs lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos (a url to BBC-drug trials gone wrong-play first 10 minutes) and practice questions with answers on slides and worksheets. AQA spec link: 3.1.9 Relevant chapter: B6 Preventing and treating diseases. AQA Biology combined textbook-Page 96-97 Specification requires students to know the following; New medical drugs have to be tested and trialled before being used to check that they are safe and effective. New drugs are extensively tested for toxicity, efficacy and dose. Preclinical testing is done in a laboratory using cells, tissues and live animals. Clinical trials use healthy volunteers and patients. •• Very low doses of the drug are given at the start of the clinical trial. •• If the drug is found to be safe, further clinical trials are carried out to find the optimum dose for the drug. •• In double blind trials, some patients are given a placebo.

Eukaryotic and prokaryotic cells lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides. AQA spec link: 1.1.1 Relevant chapter: B1 Cell structure and transport. AQA Biology third edition textbook-Page 8-9 Specification requires students to know the following; Plant and animal cells (eukaryotic cells) have a cell membrane, cytoplasm and genetic material enclosed in a nucleus. Bacterial cells (prokaryotic cells) are much smaller in comparison. They have cytoplasm and a cell membrane surrounded by a cell wall. The genetic material is not enclosed in a nucleus. It is a single DNA loop and there may be one or more small rings of DNA called plasmids. Students should be able to demonstrate an understanding of the scale and size of cells and be able to make order of magnitude calculations, including the use of standard form. MS 1b, 2a, 2h WS 4.4 Use prefixes centi, milli, micro and nano.

This ppt has been updated since last review Animal and plant cells lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides. AQA spec link: 1.1.2 Relevant chapter: B1 Cell structure and transport. AQA Biology third edition textbook-Page 6-7 Specification requires students to know the following; Students should be able to explain how the main sub-cellular structures, including the nucleus, cell membranes, mitochondria, chloroplasts in plant cells and plasmids in bacterial cells are related to their functions. Most animal cells have the following parts: • a nucleus • cytoplasm • a cell membrane • mitochondria • ribosomes. In addition to the parts found in animal cells, plant cells often have: • chloroplasts • a permanent vacuole filled with cell sap. Plant and algal cells also have a cell wall made of cellulose, which strengthens the cell.

The world of the microscope lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides. I have also included the required practical ppt as It goes hand in hand with this lesson. I would recommend doing the required practical after the plant and animal cells lesson. AQA spec link: 1.1.5 Relevant chapter: B1 Cell structure and transport. AQA Biology third edition textbook-Page 4-5 Specification requires students to know the following; Students should be able to: • understand how microscopy techniques have developed over time • explain how electron microscopy has increased understanding of sub-cellular structures. Limited to the differences in magnification and resolution. An electron microscope has much higher magnification and resolving power than a light microscope. This means that it can be used to study cells in much finer detail. This has enabled biologists to see and understand many more sub-cellular structures. WS 1.1 Students should be able to carry out calculations involving magnification, real size and image size using the formula: magnification = size of image size of real object Students should be able to express answers in standard form if appropriate. MS 1a, 1b, 2h, 3b WS 4.4 Use prefixes centi, milli, micro and nano.

Discovering drugs lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides. EDITED-PPT has been edited noticed a few spelling mistakes! Included a crossword also. AQA spec link: 3.1.9 Relevant chapter: B6 Preventing and treating diseases. AQA Biology third edition textbook-Page 102-103 Specification requires students to know the following; Students should be able to describe the process of discovery and development of potential new medicines, including preclinical and clinical testing. Traditionally drugs were extracted from plants and microorganisms. • The heart drug digitalis originates from foxgloves. • The painkiller aspirin originates from willow. • Penicillin was discovered by Alexander Fleming from the Penicillium mould. Most new drugs are synthesised by chemists in the pharmaceutical industry. However, the starting point may still be a chemical extracted from a plant.

Antibiotics and Painkillers lesson created in accordance to the NEW AQA Specification (9-1). Designed for a higher ability class, although content can be adjusted to suit any ability. Includes: slide animations, embedded videos and practice questions with answers on slides as well as a quiz. Due to this being a very short topic, I decided to teach this over two lessons and included a role play activity, it was thoroughly enjoyed by all three year 10 classes. Please leave a review at the end of the lesson, let me know how the 'doctor, patient' role play is reciprocated :) AQA spec link: 3.1.8 Relevant chapter: B6 Preventing and treating diseases. AQA Biology third edition textbook-Page 100-101 Specification requires students to know the following; Students should be able to explain the use of antibiotics and other medicines in treating disease. Antibiotics, such as penicillin, are medicines that help to cure bacterial disease by killing infective bacteria inside the body. It is important that specific bacteria should be treated by specific antibiotics. WS 1.4 The use of antibiotics has greatly reduced deaths from infectious bacterial diseases. However, the emergence of strains resistant to antibiotics is of great concern. There are links with this content to Culturing microorganisms (biology only). There are links with this content to Resistant bacteria. Antibiotics cannot kill viral pathogens. Painkillers and other medicines are used to treat the symptoms of disease but do not kill pathogens. It is difficult to develop drugs that kill viruses without also damaging the body’s tissues.