This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be shown a demonstration of magnesium being burnt in air, students are asked to predict whether they think the mass of the product will increase, decrease or stay the same. Students are asked to explain their prediction. The demonstration is then carried out, students should record in their books the mass of the magnesium before burning and then the mass of the magnesium oxide after burning, from this they can deduce the mass of the oxygen needed to burn the magnesium. Students can then check their predictions to see if they were correct or not. Now, students can summarise what they have learned by completing a ‘fill-in-the-blank’ task which is a definition for the ‘conservation of mass’ in chemical reactions. This task can be self-assessed against the mark scheme provided. Students will now also complete a ‘Quick Check’ task where they are asked come questions to test their knowledge of what they have learned so far, this work can also be marked against the mark scheme provided. Students will not complete a match-up task, students are asked to complete the sentences by matching the correct phrases together. This helps students to explore the idea of the law of the conservation of mass, considering how this applies to reactions involving solids, liquids and gases. Again, the mark scheme for this task is included for students to check and correct their work. The latter part of the lesson is on balancing equations, students are firstly introduced to the process by which students should balance an equation, demonstrated by the example of magnesium + oxygen -> magnesium oxide. A few more examples are used to talk students through the process, then students will complete a step-by-step worksheet which introduces them to balancing equations at a basic level. The mark scheme for this task is included in the PowerPoint for students to self-assess their work. The plenary task requires students to complete a 3-2-1 reduction of the lesson, to include 3 facts 2 key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the Periodic Table, students will be shown a diagram of the Periodic Table and will be asked to identify whether they think certain elements are metals or non-metals, or even semi-metals (metalloids). This task can the be checked and assessed against the answers provided on the PowerPoint. Next, students will be given part of a table of information on the properties of metals compared to non-metals. They will need to walk around the room and trade information with others in order to successfully complete their own table. Once this task has been completed, students can self-assess their work using the mark scheme provided. Students are now shown a diagram of an iron roof and a copper roof and how this can change over time, students are asked to think about what is happening in these picture & try to identify the chemical reaction. After a short class discussion, the answers to the questions will then be revealed. Students will then be told that non-metals react in a similar way with oxygen, they will then be shown 4 incomplete word equations for the reaction of different non-metals with oxygen. Students will need to complete this equation, this task can the self-assessed using the mark scheme provided. The last activity is a true or false activity, students will need to identify whether the statements about metals/non-metals are true or false. This task can the be marked using the mark scheme provided. The plenary task is an exit card, students will need to write down three key words, one fact and a question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be introduced to carbon as being one of the main constituents of life, as it is present within many molecules inside the human body - DNA, carbohydrates, fats & proteins. Students will also be introduced to the idea of ‘carbon sinks’. Students will now watch a video on the carbon cycle, students will need to answer a set of questions whilst watching this video. This task can then be self-assessed using the mark scheme provided. Next, students will be given a ‘fill-in-the-blank’ task to complete using the key words provided on the PowerPoint presenation. Students can self-assess their work using the mark scheme provided once this task is complete. Next, students will watch another video on the processes involved in the Carbon Cycle. Whilst watching this video they will be given a number of captions, which they will need to use in oder to fill in blanks on a worksheet. This task can be self-assessed using the mark scheme provided, once it is complete. Lastly, students will be given a series of pictures and words/descriptions which they need to use in order to construct their own poster of the carbon cycle, they will need to add arrows to demonstrate where the carbon is moving from and to. This task can be self-assessed using the mark scheme provided on the PowerPoint presentation. The final task requires students to read of piece of information, using this they should discuss and write down some changes that we could implement at home, and on a national scale, to help reduce our carbon emissions. The plenary is a ‘pick a plenary’ task, students will either choose to write down a summary of what they have learned this lesson in three sentences, or they may choose to write definitions for a set of key words that are provided. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the process of diffusion, spraying perfume particles in the air is used as an example. Students are shown, by way of a particle diagram, how particles spread from an area of higher concentration to a lower concentration. Students are now asked to ‘copy and complete’ a paragraph to define the process of diffusion, this task can be assessed using the answers provided. Next, students will need to sketch diagrams demonstrating the various stages of diffusion, and will need to match the correct statements to the correct diagrams. This work can be then be self or peer assessed using the mark scheme provided. The next part of the lesson looks at factors that affect diffusion, students are firstly asked to ‘Think > Pair > Share’ their ideas on the factors which might affect the rate of diffusion. After students have fed back into class discussion, the answers are revealed for students to note down in their books. They will then look more closely at the effect of temperature on the rate of diffusion by watching a video and then summarising what they have learned by completing a fill-in-the-blank task. Two other factors which affect the rate of diffusion are particle size and state of matter. Students are shown a diagram and given an explanation for how particle size affects the rate of diffusion - the heavier the particle the slower it is to diffuse. Students are then asked to consider whether particles will diffuse more quickly in the gaseous state, compared to liquid or solid state. Their answers can be discussed in pairs before feeding back to the class, the answers can then be revealed using the mark scheme provided. Lastly, students will need to explain, in terms of particles, why a solid is unable to undergo diffusion whereas a gas and a liquid are able to. The plenary activity requires students to write down 3 facts and 3 key words from the lesson and pose one question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the structure of the Earth and a description of each of the layers found within the centre of the Earth. Students will now complete a ‘Memory Test’, students will need to memorise the information shown about the structure of the Earth. They will then be given a blank worksheet to copy down as much information as they can remember, this will the be self-assessed using the mark scheme provided. The next part of the lesson focuses on the composition of elements found in the Earth’s crust, students will firstly be shown a table which shows % composition of different elements found in the Earth’s crust. Students will then watch a video demonstrating the steps involved with drawing a pie chart. Students will then need to use the skills acquired to carry out the necessary calculations and draw a pie chart, using the data provided. Once complete, students can then self-assess their work using the mark scheme provided. Lastly, students will learn about the gases which are found within the Earth’s atmosphere and how these have changed over time. Students will compare the composition of the Earth’s atmosphere today to the Earth’s atmosphere 3 billion years ago. Firstly, they are asked to describe the changes which have occurred over the 3 billion years and secondly they will need to draw a pie chart to represent the composition of the Earth’s atmosphere today. The plenary task is an anagram challenge, students are given five anagrams of key words learned this lesson. They will need to unscramble them to figure them out, the answers to this task is included in the PowerPoint. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.2 ’Elements, Atoms & Compounds’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a definition of the term ‘element’, giving gold as an example. Students are then asked to name as many elements as they can in pairs, and then feed back to the class. This work can be marked using the answers, and other examples, provided on the PowerPoint. Students will now watch a video on atoms and elements, whilst watching the video students will answer a set of questions. Once this task has been completed, students can self-assess their work using the mark scheme provided. Next, students are introduced to the definition of an ‘atom’, students are provided with a particle diagram to help depict the definition. Next, students are introduced to the Periodic Table, students can stick their own Periodic Table into their books Next, they will use the Periodic Table to complete a worksheet, once this task has been completed the work can be self-assessed using the mark scheme provided. The last task is a ‘progress’ check, students will copy and complete a set of questions in their books, this work can be marked and corrected using the mark scheme provided. The plenary activity requires students to write three sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to different examples of exothermic reactions, this includes video links to more exciting exothermic reactions like the thermite reaction and the screaming jelly baby. Students are also told the definition for an exothermic reaction. Students are now asked to consider what an endothermic reaction is, now that they know the definition for an exothermic reaction. Students are asked to ‘think > pair > share’ their ideas, eventually feeding back into a class discussion and the definition can then be revealed, as well as two two examples. Students will now watch a video on exothermic and endothermic reactions, whilst watching the video they will answer a set of questions. Once this task has been completed, students can self-assess their work against the mark scheme provided on the PowerPoint. Students will now complete an investigation to identify whether a set of three chemical reactions are exothermic or endothermic. They will start the reaction and then measure the temperature over a set period of time, finally working out the change in temperature to determine which type of reaction has occurred. Students can follow instructions on the practical worksheet and record their results in a table drawn into their books. Finally, students will complete a ‘quick check’ task - whereby they will need to answer a question on the topic of the lesson, this can then be checked against the answer provided on the PowerPoint. The plenary task is an anagram challenge, students need to unscramble a set of anagrams which then spell out a set of key words from the last few lessons on reactions. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a mind map task, students are given a definition for recycling and are asked to come up with a mind map of different materials which are able to be recycled. Students can discuss this in pairs and complete the mind map in their books, this work can then be self-assessed using the mark scheme provided. The next part of the lesson focuses on how aluminum is recycled, students will watch a video on the steps involved in the recycling of aluminum. They will then be given a set of jumbled statements, students will need to place the statements in the correct order to describe the method of aluminum recycling. This task can then be marked and corrected using the mark scheme provided. The next learning objective students will achieve is the ability to discuss the advantages and disadvantages of recycling. Students will need be given a card sort of statements, students will be requires to sort these statements into the correct columns - advantages/disadvantages. This task can the be self or peer assessed. Lastly, students will consider the limits to recycling, they will be shown a short video and will be required to answer a set of questions whilst watching. The mark scheme for this task is included in the PowerPoint so students can self-assess their work using the mark scheme provided. The plenary task requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the elements found within Group 7 of the Periodic Table - the Halogens. Students will learn about some of the properties of these elements before each being given some information on the physical properties of one particular halogen. Students will then need to walk around the room and share information with each other in order to complete a summary table. This work can be self-assessed using the mark scheme provided. Students will now need to focus on identifying trends with the halogen group, students will be given the melting points and boiling points of the halogen elements. Using this data they will need to answer a set of questions, this task can then be self-assessed using the mark scheme provided. The next part of the lesson will focus on displacement reactions which occur amongst halogens, students will be shown a diagram which demonstrates how a more reactive halogen will displace a less reactive halogen. Students will now assess their knowledge of this topic by completing a set of word equations, this work can the be self-assessed using the mark scheme provided. The plenary activity requires students to ‘Pick a Plenary’ - either summarise what they have learned in three sentences or write a definition for a set of key words which were learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The first task is for pupils to research, either using their phones or using laptops, the dates at which different metals were discovered. Once they have found the dates and filled in their table, they should consider the link between the reactivity of the metal and when it was discovered. After a class discussion of their ideas, students are introduced the idea of a metal ore. The next task is for pupils to watch a video and answer questions on metal extraction, the answers to which are included in the PowerPoint presentation so students are able to self-assess their work. The next part of the lesson focuses on how metals can be extracted from their ores, firstly students will be shown the position of carbon within the reactivity series. They will then be told that any metal below carbon in the reactivity series is able to be extracted from its oxide by a reaction with carbon. The general word equation for this reaction is shown to students, they can make a note of this in their books. They will then be asked to write down the complete word equations for the reactions of copper, iron and zinc with carbon. The mark scheme for this is provided on the PowerPoint presentation for students to mark and correct their work once complete. Lastly, students need to be able to work out the amount of metal present in an ore. A worked example of this calculation is shown to students, they can make a note of the steps when approaching a question of this sort in their books. They will be then given a worksheet of questions to answer which requires students to calculate the masses of useful metal found in metal ores, as well as the waste. The mark scheme for this task is included in the PowerPoint so students can self or peer assess their work once it is complete. The plenary requires students to write a Whatsapp message to friends, explaining what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a video animation on melting and freezing, along with written definitions that students could use to take notes down in their books. This leads into a task whereby students need to explain what is happening to the particle arrangement of a solid as it melts in a liquid, and of a liquid as it turns back into a solid during freezing. Students will watch a video first, then will have a go at coming up with their written explanations. Their answers can then be checked against the ones included in the PowerPoint presentation, students can mark and correct their work. Next, students are introduced to the idea of pure and impure substances are an explanation of how this affects the melting point of a substance is included. Students can investigate the melting point of stearic acid by carrying out a practical investigation, the equipment list and method for this investigation is included on the PowerPoint for students to follow. Their results should be recorded in a suitable table and can be plotted onto graph paper as an extension task. Next, students are given a diagram of the changes of state and are asked to draw a particle diagram for each of the states of matter, to show the transition between the states. This work can be self-assessed using the answers provided. Lastly, students will be asked to complete a ‘Progress Check’ task to assess what they have learned so far this lesson. The mark scheme for this task is included on the PowerPoint. The plenary is a ‘pick a plenary’ task, students can either summarise what they have learned so far this lesson in three sentences or write definitions for a set of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’ module. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to chemical reactions, students will read a paragraph of information on chemical reactions. Using the information students will answer a set of questions, this task can then be self-assessed using the mark scheme provided once complete. Students will now watch a video about chemical reactions, they will need to write down as many things you might see/hear/feel during a chemical reaction. This work can the be self-assessed using the mark scheme provided on the PowerPoint presentation. Students will now summarise what they have learned so far by completing a ‘fill-in-the-blank’ task, this work can also be marked and corrected using the anwers provided Students will now consider whether chemical reactions are useful or now, they will be given a list of different chemical reactions and they will need to sort these into two columns - useful or not useful. Students can then self-assess this task when it is complete. Next, students will watch a video on the differences between chemical and physical changes. Whilst watching the video students will need to answer a set of questions, this work can self-assessed using the mark scheme provided. The last task requires students to determine whether a set of examples are demonstrating a chemical or a physical change. They could complete this task as a class, using mini whiteboards. The plenary task requires students to write three sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts off with an introduction to the Periodic Table and Dmitri Mendeleev, this then follows into a video which students will watch and will also answer questions on a worksheet. Once this task has been completed, students can self-assess their answers using the mark scheme provided. Next, students are introduced to the idea of groups and periods of the Periodic Table. Students can take notes on the definition of these two terms, before leading into a task whereby students will be given some data on the melting points and boiling points of Group 1 metals. Using this data students will be asked to answer a set of questions, this work can then be marked and assessed using the mark scheme provided. The next task focuses on periods of the Periodic Table, students will need to use the data provided in the PowerPoint presentation to answer a set of questions on the pattern of melting points across Period 2 and Period 3. This task can then be self-assessed using the mark scheme provided. The last task is a copy and correct task, students will need to copy the paragraph out into their books, correcting any mistakes. This work can the be marked and assessed using the mark scheme provided in the PowerPoint. The plenary task requires students to write down three quiz questions to test their peers knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.2 ’Elements, Atoms & Compounds’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students are firstly asked to complete a worksheet which is a recap on what they have learned prior to this lesson on the differences between elements, compounds and mixtures. Once this task is complete students can self-assess their work using the mark scheme provided. Next, students are introduced to some of the basic concepts of naming compounds. Students are shown a particle diagram of a carbon monoxide molecule and a carbon dioxide molecule and are asked to ‘Think > Pair > Share’ their ideas about which is which. The answer is then revealed and students are shown that molecules with an atom of one element alongside an oxygen atom are called ‘oxides’, those with one oxygen atom are called monoxides and those with two oxygen atoms are dioxides. Students are now given a table with some information missing out of it, students will need to identify either the name of a compound or the elements that are found within a named compound. Once complete, the task can self-assessed using the mark scheme provided in the PowerPoint presentation. The next part of the lesson focuses on chemical formulae, students are shown what the chemical formula of a substance tells us about that compound, in terms of the relative number of atoms of each element found in that compound. Students will then need to complete a worksheet to assess their knowledge of what they have learned so far this lesson, first part requires students to name the elements found in a set of compounds given the name or the chemical formula. Second task requires students to identify the number of atoms of each elements in a set of compounds. Once this task has been completed, students can self-assess their work using the mark scheme provided. The plenary requires students to write a five minute account of what they have learned this lesson, including what they know now and what they would like to spend more time on. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the differences between elements, compounds and mixtures. Students will be given a set of diagrams and will need to decide which is which, they could write their answers down in their books or use mini white boards and complete as a class. The answers can then be revealed using the mark scheme provided and students can check their answers. Students are then given an explanation of what happens to substances during a chemical reaction, atoms rearrange and new bonds form new substances with different properties. The example of iron sulphide is used, a demonstration could also be carried out to show that iron (in a mixture of iron and sulphur) is magnetic before it is heated. Once iron and sulphur are heated to form iron sulphide, the magnetic properties are now lost. Students are now shown the basis of a word equation and the difference between reactants and products. They will then be given two word equations and will need to determine which are the reactants and which are the products, the answers will then be revealed. They will then be given four more reactions, students will need to identify the reactants and products of these reactions. Students can then self-assess their work using the mark scheme provided. Students will now try writing their own word equations using a description provided, students will need to complete a worksheet of these tasks. The answers to these questions are included in the PowerPoint for students to self-assess their work. Lastly, students will complete an investigation to observe what happens during three chemical reactions. Students will be given the practical worksheet, they can complete the investigation as a group and note down their observations from the reactions. Once the investigation is complete, students will then need to match the reactants from the reactions they carried out with the correct products. This work can then be marked and corrected using the answers provided. The plenary task requires students to write a twitter message summarising what they have learned today, students should #keywords! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

his lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with the collapsing can demonstration, students are asked to watch the demonstration (either completed by the class teacher or use the video included) and come with with an explanation of what is happening. This activity leads onto a definition for gas pressure, students are given the definition which is explained using the diagram included. Students can take notes of this process in their books, drawing the diagram would also be helpful. Students are now asked to consider whether the factors which may lead to an increase in pressure, students will need to discuss with their partner and come up with some ideas. This leads onto the next PowerPoint slide which outlines three factors - an increase in the number of particles, an increase in temperature or a decrease in the size of the container. All would lead to an increase in the frequency of collisions the particles have with the sides of the container. Students will now complete a worksheet to assess their knowledge of what they have learned so far this lesson. This work can be self-assessed using the mark scheme provided. Next, students are asked to ‘Think > Pair > Share’ their ideas of why an increase in temperature leads to an increase in pressure. Students should try to explain their answer using the particle. model, students can discuss in pairs before writing their thoughts down and then feeding back to the class as group discussion. The answer to this task can then be revealed, students can check and correct their work. Lastly, students will complete a ‘Teach me, tell me’ task - students will be given a Q&A card, as well as a worksheet of questions. They will need to share the answer to their question with other students in the classroom in order to complete the worksheet of questions on gases & pressure. The plenary task requires students to write a Whatsapp message on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the elements found within Group 1 of the Periodic Table - The Alkali Metals. Students will also learn some of the properties of the Alkali Metals which make them similar to other metals. Students will now focus on the reaction of alkali metals with water, students will learn what happens with lithium is placed in water - including the word equation for this reactions. After learning this, students will then need to copy and complete the word equations of other alkali metal reactions with water. This task can then self-assessed using the mark scheme provided. Students will now draw a table in their books before watching a video on the different reactions of Group 1 metals with water. Students will need to note down observations whilst watching the video. After completing this task, students are asked to ‘Think > Pair > Share’ their ideas about how they think rubidium and caesium will react with water. After this task, students can assess their work and also watch a another video to find out if their predictions about rubidium and caesium were correct. The next activity requires students to read a paragraph of information about the alkali metals, students will then need to answer a set of questions using this information. Once complete students can self-assess their work using the answers provided on the PowerPoint. The last activity is a ‘True or False’ activity, students will need to decide whether the statements are correct or not. The answers are provided for this task so students can check their work. The plenary activity requires students to write down three facts, three key words and one question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a video on decomposition reactions, students will be given a set of questions which they will need to answer whilst watching the video. The mark scheme to this task is included in the PowerPoint, so students can self-assess their work once it is complete. Students now know what a decomposition reaction is, they are now asked to consider what they think a thermal decomposition reaction might be. Students ‘Think > Pair > Share’ their ideas, eventually feeding their ideas back to a class discussion and the answer can be revealed using the PowerPoint so students can check their answers. Next, students will complete an investigation to determine which metal carbonate will decompose the quickest. Students will be given a practical worksheet, they can work their way through the steps and write their results in the results table provided. Once students have collected their results, they are asked which type of graph would be most suitable to present their results. Students can discuss their ideas before feeding back into a class discussion, the answer is then revealed as a bar chart as we are dealing with discrete data. Students can then plot their results onto a graph. The plenary task is a ‘pick a plenary’ activity - students will either summarise what they have learned in three sentences or they can write a definition for a list of key words from the last few lessons. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.2 ’Elements, Atoms & Compounds’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a video on elements & compounds, students will answer a set of questions whilst watching the video. This work can then be self-assessed using the mark scheme provided. Next, students are given a set of diagrams which depict either elements or compounds. Students need to identify whether the picture is of an element or compound, then write an explanation for their choice. This task can then be self-assessed using the mark scheme provided. Next, students are given a set of two diagrams - one is of a mixture and the other is of a compound. Students are asked to ‘Think > Pair > Share’ their ideas on which is a mixture and which is a compound, giving an explanation for their answer. Students can feed their ideas back to a class discussion, before the definition for a mixture vs. a compound is revealed using the PowerPoint presentation. Students are then asked to copy and complete a set of sentences to summarise the differences between elements, mixtures and compounds. This work can be marked and corrected using the answers provided on the PowerPoint. Next, students are asked to complete an investigation looking at the properties of a mixture of iron and sulphur before and after it is heated. Before it is hated, students should identify that iron and sulphur is a mixture, with iron showing magnetic properties. Then, the mixture is heated and students are asked to decide whether it is now a mixture or a compound, they will also need to test the magnetic properties of this substance to see whether it has changed. The plenary task is an exit card, students are asked to write down three things they have learned this lesson, five key words and one question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly watch a video on the changes of state, this outlines processes students have covered in previous lessons as well as new processes such as evaporation, condensation and sublimation. Whilst watching the video, students will need to answer a set of questions, this work can then be self-assessed using the mark scheme provided. Students will now need to copy and complete a diagram to demonstrate the changes of state which occur between solids, liquids and gases. This work can be assessed using the mark scheme provided once it is complete. Students are now given an explanation of evaporation using the particle model, students can take notes on this process - including a particle diagram to depict the process. After this students are given a set of statements which either describe the process of boiling or the process of evaporation, students should sort these statements into the correct columns. The answers for this task are included on the PowerPoint for students to assess their work. Students will now be asked to ‘Think > Pair > Share’ their ideas on the factors which could affect the rate of evaporation. Once students have had a chance to discuss their thoughts, they should feed back to the class before the answers are revealed. Lastly is a ‘true or false’ assessment task, students need to read the statements and decide whether they are true or false. This work can be assessed using the mark scheme provided. The plenary requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)