This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a recap from the previous lesson showing gametes fusing during fertilisation and the changes in chromosome numbers. The first task is for pupils to watch a video and answer a set of questions whilst they are watching, once the video is complete they can assess their work using the mark scheme provided. Pupils will then be given a worksheet with a diagram of meiosis occurring and statements where pupils will need to fill in blanks to complete the correct steps in the process. Pupils can assess their work using the answers provided. Pupils will then be shown the different between diploid and haploid cells and how this can be depicted in a diagram, they will be shown the changes that occur going from two haploid gametes to a diploid zygote. The next activity is for pupils to sort statements into two columns - mitosis or meiosis. Once this activity has been completed pupils can mark their work using the answers available. Pupils will now complete a quick check, pupils will answer questions about the topic of meiosis into their books. For higher tier pupils they can be challenged by completing the questions at the back of their books without using their notes. Once completed the work can either be self-assessed or peer-assessed. The final activity is an exam-style question which higher ability pupils can complete at the back of their books, this can then be assessed usng the mark scheme provided. The plenary activity is for pupils to pick a plenary between summarising the work from the lesson in three sentences or writing a definition for a set of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Homeostasis' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a think > pair > share task asking pupils to consider the different ways in which males, females or both could potentially find difficulty in conceiving a baby. Images are shown in order to prompt students to think about the anatomy of the male and female reproductive system. Answers will then be provided, pupils can check their ideas against those shown on the PowerPoint slide and red-pen their work. The next task is a fill-in-the-blank task on the role of FSH and LH during fertility treatments, pupils will need to consider the job of these two hormones in a healthy woman (covered during the menstrual cycle lesson) and then summarise how these hormones are used in fertility drugs. This work can be assessed using the answers provided once complete. The next part of the lesson focuses on how in vitro fertilisation works, pupils will be shown diagrams and descriptions of the stages involved with this process. Extra challenge questions are provided at the bottom of the worksheet should some students complete their work quickly. Pupils will then need to complete a worksheet o summarise these steps, once completed this work can be assessed using the mark schemes provided. Finally, students will need to consider the advantages and disadvantages of IVF. They will be given some information, one between two, they will need to use this information to summarise the pro's and con's of IVF. For the last task pupils will be given opinion cards in groups, they should read out the opinion cards and discuss which one's they agree with and why. They should then write a conclusion of their own opinions on IVF in their books, using as many valid scientific points as possible. The plenary task is for pupils to write a twitter message about what they have learnt that lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a resource which meets specification points from the NEW AQA GCSE Physics 'Energy' SoW. Other lessons from this SoW can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by pupils considering which of the energy resources are renewable or non-renewable. Pupils will then use the posters, which can be placed around the room or on pupils desks, to complete a table which identifies how the energy resource generates electricity and the advantages and disadvantages of each energy resource. Pupils are then given a list of statements about all power stations which they need to cut and stick (or write) into two columns - advantages or disadvantages. **To challenge higher ability pupils this could be completed at the back of students books, so they cannot use information from the previous task**. Pupils can then peer-assess their work. The plenary activity is a past-paper question which involves analysing some data on the usage of different power stations between two time periods. The mark scheme is included, pupils can use this to either peer-assess or self-assess their answer. All resources are included. Please review, I would appreciate any feedback :). Thanks!

PowerPoint and task cards aimed at a KS3 class (initially planned for Year 9) to complete a poster, written assignment and a model for a specific area of Science to present in a Science Fair. For each of the task cards a detailed list of requirements for each part of the project is included, with ideas for extension work to earn more points and homework ideas as well. I used this resource straight after my students had completed their end of year test as a fun and engaging activity, when complete pupils presented their projects to the class and I awarded certificates for best written assignment, best poster, best model and best overall project.

This resource includes PowerPoint presentations for two lessons and it covers all of the specification points for the NEW AQA Infection and Response unit. The first lesson identifies the difference between health and wellness. Pupils will then be introduced to the idea of communicable and non-communicable diseases, they will then determine whether different diseases are either communicable or non-communicable and consider the similarities/differences of the disease within each category. The last activity of the lesson is to produce a mind map of risk factors which could increase the chance of a non-communicable disease. The second lesson will start with recapping on the risk factors which can increase the likelihood of non-communicable diseases and students will need to think about whether specific risk-factors relate to specific diseases. We will also analyse the most preventable threats to health globally. Pupils then answer then ‘Think, Pair’ Share’ on why governments might run ‘keep healthy’ campaigns, what benefit might that be to the government and to it’s citizens. Pupils discuss and then answer questions on this topic. Plenary - recapping on the key words related to these two lessons.

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by looking an organism - a cat- and asking pupils to think about the types of stimulus the cat might respond to in it’s environment, plus which organs it needs to sense these stimuli. Pupils will brainstorm their ideas and then self-assess their work once the answers are revealed, additionally they will answer an exam question on this topic. Next, pupils focus on the effectors and their role in the nervous system. Pupils will be provided with a description of the role of muscles and glands as effectors and will then need to complete an exam question to assess their knowledge, mark scheme provided for either peer or self-assessment. The next part of the lesson will focus on neurons, firstly a diagram of a neuron cell is shown and pupils need to think about how this cell is similar and different to a normal animal cell. Pupils may discuss this in pairs and try and come up with an answer before the mark scheme is revealed. Sensory and motor neurons are now introduced via an animation, pupils can look at the pathway the electrical impulse travels as it moved around the nervous system. Pupils will use this to then copy and complete a summary to describe this process, when completed this can be self-assessed. The final activity is for pupils to copy and complete a table to sum up the main functions of each part the human nervous system either by using a card sort or by putting the statements on the board. This can then be peer or self-assessed when complete The plenary activity is for pupils to summarise the 5 main key words they have learnt that lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Rates of Reaction’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an introduction to reversible reactions, including the example of thermal decomposition of ammonium chloride. Pupils will then conduct an investigation into the energy changes which occur during a reversible reaction, using the practical sheet provided students will carry out the experiment and record their results in the table provided. The reversible reaction from this investigation is then shown on the board, with an explanation of the energy changes that are taking place as the reaction moves in either the forward or reverse direction. Pupils will now watch a video on energy changes which take place during a reversible reaction, using this they will need to answer a set of questions. This work can be self-assessed using the answers provided on the PowerPoint presentation. Pupils will now need to complete a ‘Quick Check’ task which includes questions within the module of ‘Rates of Reaction’, students can then self-assess or peer-assess their work using the mark scheme provided. Finally, pupils can complete a crossword which summarizes definitions used within the ‘Rates of Reaction’ module, the answers for this are provided for self/peer assessment. The plenary task required pupils to complete an exit card listing 3 things they have learnt today, 5 key words and 1 question to test their peers knowledge of a subject. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a resource for the new AQA GCSE Biology ‘Infection and Response’ module. The lesson begins with an introduction to the structure of fungi and protists and some of the diseases they can cause in plants and animals. Pupils can then stick a piece of information in their books which outlines the rose black spot fungal disease of plants and the protist disease of malaria in humans. Pupils should use this information to work their way through the levelled tasks on the board. You can then go through the answers to these questions and pupils can self-assess or peer-asses their work. The mid-lesson progress check is an activity where pupils match definitions to the correct key words, pupils can self-assess their work. In the next activity pupils can create a pamphlet/poster aimed at patients going abroad to a country where they could be at risk of contracting malaria. Pupils can work through the tasks for each of the parts of the ABCD approach in order to complete this poster. Pupils can then peer-assess their work. Plenary is a quick quiz pupils can complete at the back of their books. Other lessons from the ‘Infection and Response’ unit can be found in my TES shop. Thanks :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Bioenergetics’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will learn about the products made during photosynthesis and how these are used plants. In particular the uses of protein, cellulose, starch and fats & oils. At a higher level pupils will consider the advantages and disadvantages of energy storage molecules such as fats, oils & starch. Pupils will have an opportunity to use information points around the room to complete a levelled worksheet on this topic which will be peer assessed at the end of the lesson. Extension opportunities are available if finished. Once this first activity has been self or peer assessed pupils will then have the opportunity to conduct an experiment to investigate the presence of starch in normal and variegated leaves. The last activity pupils will complete are two exam-style questions on the topic of the lesson, this can then be self-assessed. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a think > pair > share task where pupils will need to discuss the definition of ‘competition’. After revealing the definition for competition within the ecology context, pupils will then need to think about the types of resources that plants and animals compete for. They will be given a set of resources, they will need to sort these resources into two columns – those that animals compete for and those that plants compete for. Once this task is complete pupils can self-assess their work using the answers provided on the PowerPoint slide. In the next activity pupils will need to draw a table in their books and they will watch a video on competition in a variety of organisms. Pupils will fill in their table by identifying the organism and then describing how it competes for the resource/s that it needs. Pupils will then be asked to think about why animals and plants may want to avoid competition, pupils can discuss with their partner and write their answers in their books. The answers can be revealed using the PowerPoint slide. Pupils can mark and check their work. The focus of the next part of the lesson is for pupils to consider how plants might avoid competition with other plants, pupils are asked to look at some pictures showing how plants avoid competition and students can discuss in pairs what they think the pictures are demonstrating. The answers to this task can then be revealed and pupils can check their answers, making any corrections where necessary. The final task is an exam-style question on competition, pupils will answer the question in their books and can then self-assess their work using the mark scheme provided. The plenary task is for pupils to summarise what they have learnt in three sentences, trying to use as many key words from the key word list provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts by pupils discussing what they think might be some differences between primary and secondary sexual characteristics in males and females. Once they have brainstormed their ideas and you have carried out a short classroom discussion you can identify the differences between these two sets of characteristics. The next slide provides students with a long list of statements describing secondary sexual characteristics of both males and females, pupils will need to sort the statements into two columns - male female - some will go into both. Once finished pupils can assess their work using the answers. Now pupils will look at the structures found in both male and female reproductive systems and the roles they play. Pupils will be shown a diagram to demonstrate these parts and then pupils will be given a blank worksheet and a set of jumbled statements, they will need to match the structures to the correct part on their diagram. This work can then be assessed to check they have correctly matched the organs and functions. Pupils will now watch a video introducing the menstrual cycle, using the video pupils will need to try and write a describe the roles each of the female hormones - oestrogen, progesterone, FSH, LH - plays in the menstrual cycle. If pupils weren’t able to get down a detailed answer they can mark and correct their work using answers provided. The final activity is an exam-style question, along with the mark scheme to check their work. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson which meets specification points within the OCR Gateway Science - B1 -Cell-Level Systems SoW. This lesson starts with a description, and diagram, of how DNA is copied via the process of transcription. Students will watch a short animation on the PowerPoint which further outlines this process, they will then need to complete a fill-in-the-blank task. This can be self-assessed using the mark scheme provided. Next, children will look at the structure of DNA and mRNA and compare the two, they will complete a table which outlines the similarities and differences between these two molecules. This can be self-assessed using the answers provided. The latter part of the lesson is on translation, children will be given a description and shown a short animation of the process of translation. After this, a video will be shown and students will need to answer a set of questions whilst watching. The answers to this task are included in the PowerPoint, and children will need to self-assess their work once it is complete. The final activity is an exam-style question on DNA. All resources are included, please review with any feedback :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Biological Molecules’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson begins with a starter discussion to explain the effect temperature has on enzymes. Students should explain why they think many enzymes cannot function at over 60 degrees celcius. Then, go on to teach students the inhibitor classifications and their functions through three slides containing definitions and diagrams. Students then have an opportunity to identify competitive and non-competitive inhibitors as a class through two easy diagrams. Students will then be asked to complete “worksheet 1” independently, in order to practise diagramming competitive and non-competitive inhibition with complete definitions, on their own. The answers are displayed on the following slide so students may self-assess, or you may choose to have them assess each-others’ work in partners. You can find worksheet 1 at the end of the PowerPoint on slide 17. The following slide explains substrate concentration and reaction rate with competitive, and then non-competitive inhibition. Students should use worksheet 2 (slide 18 of the PowerPoint) to take notes and answer the questions independently. When worksheet 2 is complete, define potassium cyanide and encourage a discussion between pairs about the danger of cyanide. Students should then complete the exam style questions from slide 19 and self-assess. If necessary, leave time for questions and discussion. The lesson concludes with a plenary task which asks students to write a tweet demonstrating what they’ve learned, their tweet should be no more than 140 characters and include #keywords. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Molecules & Matter’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to radiation, firstly looking at background radiation. Students are given some time to discuss on their tables, the sources of background radiation. After students have fed into a class discussion the answers can be revealed on the PowerPoint. Next, students are shown some data on the sources of background radiation. Students will be required to answer a set of questions about this data, they can complete the work in their books and the mark scheme is provided on the PowerPoint. Next, students are introduced to Marie Curie and her work towards radioactivity. The students will be given a list of questions and they will need to answer these using the video, the answers to which are then included so students can self-assess their work. Students will then be asked to consider the safety rules when dealing with an radioactive substances before a teacher demonstration is carried out using a Geiger-Muller counter. Student are asked to observe the demo and also record their observations and answer a set of questions. This can then be marked using the mark scheme provided. The last task requires pupils to complete a summary worksheet on radiation, this work can be self-assessed using the mark scheme provided. The plenary activity is an exit card, students will need to write down three things they learned during the lesson, five key words and one questions to test their peers knowledge of the lesson content. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will firstly come up with a mind map of ideas about why water is such an important resource, they can discuss with their partner and write their ideas in their books. Some of the reasons can then be revealed via the PowerPoint presentation and pupils can assess their work - making corrections where necessary. Pupils are then shown a quick recap of the stages involved in the water cycle, before beginning to look at the treatment of fresh water and purification of salt water. Students will be given a worksheet of questions, around the room will be information sheet on how fresh water is turned into potable, drinking water and how sea water is purified. Pupils will need to read the information posters to answer their questions, this work can then be self-assessed using the mark scheme provided. The next part of the lesson will focus on waste water treatment, pupils will watch a video on the steps involved with sewage treatment. Pupils will answer a set of questions whilst watching the video, this work can then be self-assessed using the answers provided. The final task is for pupils to complete an exam-style question on this topic, they can answer in their books and either self or peer assess using the mark scheme provided. Finally, pupils will be given a set of answers, they will need to come up with questions which match these answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes, electrolysis and energy changes’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first task is a recap on the differences between endothermic and exothermic reactions, students will need to complete a fill-in-the blank task which can then be self-assessed using the answers provided. Next, students are introduced to reaction profiles with a diagram to demonstrate what is happening during an exothermic chemical reaction. Students will then be asked to use mini-whiteboards to draw a reaction profile for an endothermic reaction, they can check their ideas using the answer provided in the PowerPoint. The next slide shows the reaction profiles for both an endothermic and exothermic reaction, as well as an explanation of the energy changes which take place during these types of reaction. Pupils can take notes from this slide, including sketching a diagram of the two reaction profiles. The next task is for pupils to complete is a progress check to assess their understanding of what they have learned so far, once complete pupils can self-assess or peer-assess their work using the answers provided. Next, pupils will watch a video on activation energy, they will need to answer a set of questions using the information provided in the video. Pupils can self-assess their work using the mark scheme provided in the PowerPoint. The next part of the lesson focuses on bond breaking/making and bond energies. Firstly, students are shown (using a diagram to demonstrate) what happens, in terms of energy changes, when bonds are broken or when bonds form during a chemical reaction. Students can then summarise what they have learnt so far by completing a fill-in-the-blank task, this task can be self-assessed using the mark scheme provided. Lastly, students are introduced to bond energies and are shown how to calculate the energy change for a chemical reaction using a worked example. Students will then need to complete a worksheet on bond energy calculations. The mark scheme for the worksheet is included in the PowerPoint for pupils to self-assess or peer-assess their work. The plenary task requires pupils to identify a WWW and EBI from the lesson, listing what went well/what they have fully understood and what they could do better next time. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a video on covalent bonding, pupils will need to watch the video and answer a set of questions. When pupils are finished their work can be marked using the answers provided. The next activity is a crossword on covalent bonding, this too can be self-assessed using the answers provided on the PowerPoint. The next part of the lesson focuses on simple covalent molecules, firstly pupils are introduced to the idea that covalent structures are either simple molecules or giant structures. Pupils will be shown dot and cross diagram of a hydrogen molecule and asked to have a go at drawing a dot and cross diagram of a chlorine molecule. Once this work has been checked, pupils are then shown how to draw a dot and cross diagram of a double bond and triple bond (oxygen molecule and nitrogen molecule), it may be beneficial for pupils to draw these diagrams in their books for future reference. The lesson now focuses on some of the properties of simple covalent molecules, then pupils will be asked to draw a dot and cross diagram to show the structure of water, methane and ammonia. Once this task is complete, students can assess their work using the answers provided on the PowerPoint presentation. The final task is a true or false task, pupils are given a set of statements about covalent bonding. They will need to identify if true or false, this can be done as a whole class using white-boards or in their books. The plenary task is for pupils to unscramble anagrams of words relating to the bonding topic. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Organisation’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by pupils given a bit of information about the tissues which make up the lining of the stomach. They will need to read this information in pairs and then answer questions in their book, once completed the pupils can self or peer-assess their work using the answers provided on the next slide. Pupils will then be introduced to the digestive system, it’s role and the organs involved with this system. They should be able to remember some information from previous lessons on organ systems (see ‘Principles of organisation’ in my shop!). Now, pupils must read through another card of information in pairs and complete tasks on the board, these tasks will require pupils to label a diagram of a human body to show the locations of the major organ systems and also describe the function of these organs. The next task is a video which pupils will watch and answer questions, list of questions is provided as a worksheet. Pupils will then self-assess their work using the answers provided after the video has finished. The final activity is an exam-style question, pupils will answer this on the sheet and then mark their work using the mark scheme. The plenary task is a word search challenge, there are 10 words associated with digestion in the word search. Pupils will race to complete against each other to complete the word search. You can award a prize if you have any :) All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)