This resource includes PowerPoint presentations for two lessons and it covers all of the specification points for the NEW AQA Infection and Response unit. The first lesson identifies the difference between health and wellness. Pupils will then be introduced to the idea of communicable and non-communicable diseases, they will then determine whether different diseases are either communicable or non-communicable and consider the similarities/differences of the disease within each category. The last activity of the lesson is to produce a mind map of risk factors which could increase the chance of a non-communicable disease. The second lesson will start with recapping on the risk factors which can increase the likelihood of non-communicable diseases and students will need to think about whether specific risk-factors relate to specific diseases. We will also analyse the most preventable threats to health globally. Pupils then answer then ‘Think, Pair’ Share’ on why governments might run ‘keep healthy’ campaigns, what benefit might that be to the government and to it’s citizens. Pupils discuss and then answer questions on this topic. Plenary - recapping on the key words related to these two lessons.

This is a resource which meets specification points for the NEW AQA GCSE Physics 'Energy' module. The lesson begins by introducing the concept of gravitational potential energy stores, pupils will have learnt about this in the first lessons from this module on 'Energy stores' (found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience). Pupils are then given the first calculation needed to calculate the change in gravitational potential energy of an object (weight x height). Pupils can then practise using this calculation by copying and completing the task on the next slide. Pupils will self-assess their work, answers provided on a PowerPoint slide. Pupils are then introduced to the second calculation they can use to calculate the change in gravitational potential energy of an object (mass x gravitational field strength x height). Pupils can then complete questions 1-5 on the worksheet provided and once finished they can self-assess their work. The final activity is for pupils to look at a past-paper question, with their partners they can discuss how to go about answering the question. Following a class discussion pupils can attempt to answer the question and then self-assess their work. **For higher ability pupils they can complete the question without the class discussion**. The plenary is a '30 second conversation', pupils turn to their partners and talk about what they have learnt this lesson for 30 seconds. All resources are included at the end of the PowerPoint.

This is a lesson which meets specification points for the new AQA 'Energy' module (2016). The lesson begins by considering whether a pendulum placed in a vacuum will carry on swinging, pupils can discuss their thoughts and there is a video which shows an experiment taking place with a pendulum placed in different mediums. Pupils can then draw a diagram to show the energy transfers taking place as a pendulum swings. Pupils are the introduced to the principal of the conservation of energy, they can write this definition down in their books. Pupils are then given a blank cartoon strip, pupils will need to complete the captions to describe the energy transfers taking place during a bungee jump and they can draw a diagram to represent what is happening for each caption. **This task could be difficult for lower ability students, you can provide the words that go in the blanks on the board for pupils who may struggle with his task.** The next slide has progress check questions for pupils to complete in their books, pupils can then peer-assess their work. **Slides 6-7, which contain additional tasks on the conservation of energy - a fill-in-the blank task & a word search - could be used as an alternative to the more difficult progress check questions for classes of lower ability, or could be used as an extra activity for higher ability classes** The plenary is a 3-2-1 task, pupils state 3 facts, 2 key words and create 1 question to test peers on the topic of the lesson. All resources for this lesson are found at the end of the PowerPoint.

This is a lesson aimed at the new Physics specification, it meets specification points within the 'Energy' module. Other lessons from the 'Energy' module can be found in my TES shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a word search that pupils can complete to identify key words related to this lesson. Pupils will then watch a video on specific heat capacity where they will need to identify the factors which may affect a materials SHC. Pupils are then introduced to the concept of specific heat capacity and you can work through model questions with students to demonstrate how to approach and answer questions (model questions included on the PowerPoint slides). Pupils then have a go at completing SHC capacity questions on their own, pupils can then self-assess their work. Next activity is a 'Cloze' activity where pupils need to copy and complete sentences, words are provided. Plenary - pupils are provided with a range of answers, they need to write questions which correspond to these answers. All resources are included in the PowerPoint presentation. Enjoy and if you have any feedback please leave a review :)!

This resource is for the NEW AQA GCSE specification on preventing infections, it meets specification points within the 'Infection & Response' module. This resource includes a PowerPoint presentation and all the resources needed for the lesson. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by pupils considering what a communicable disease is, the differences between bacteria and viruses and the mechanisms by which these pathogens spread disease. The next part will be a brief introduction to the work of Ignaz Semmelweis, Joseph Lister and Louis Pasteur and how they have improved our knowledge of pathogens and contributed to the development of methods to stop the spread of infection. Pupils will then focus on the work of Ignaz Semmelweis by writing out some sentence starters, watching a video on his work in hospitals in order to finish the sentences off. Pupils can then assess their work using red pens. The next activity pupils will need to read some information on different disease prevention methods and will need to copy and complete the table shown on the PowerPoint slide. This could be achieved using a circus activity, whereby poster so the information are made and placed around the room for pupils to access. Finally, pupils will then consider some data on the board and use this to explain the difference between a pandemic and an epidemic. All of the resources you need for this lesson are included on the PowerPoint slide, there is also an additional resource of a newspaper article activity on Semmelweis which could be used as a homework activity.

This is a lesson from the NEW AQA specification on defence mechanisms of the body, from the ‘Infection and Response’ module. This lesson is part of a 12 lesson bundle for the NEW ‘Infection & Response’ Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by recapping on what a communicable disease is and what risk factors can increase the likelihood of a communicable disease spreading from person to person. Students are then given an outline of a human body, they will need to label it with the various different ways pathogens can enter the body. Pupils can then mark and check their work against the examples on the PowerPoint slide. Students then discuss how your body may stop pathogens entering via these various different entry routes and you can use the information on the PowerPoint slide to highlight these various defence mechanisms. Pupils can spend time annotating their diagram to display these defences and peer-assess their work - R/A/G. Next, is the introduction of white blood cells, you can explain their different roles using the diagrams on the PowerPoint slide and by use of the video/animation links. Pupils should then fill in a table of information using as many key words as possible, pupils should self-assess their work to check for the correct use of the key terms. Plenary - past-paper question which I get pupils to complete in silence and hand to me as they leave (exit card). I will then mark and grade it for the next lesson, but equally they could complete and mark within the lesson. All resources are included within the PowerPoint presentation. Enjoy :)

This is a lesson for the new AQA GCSE Biology Specification, it particularly meets specification points from the 'Infection & Response' unit. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by pupils thinking about the type of risk-factors that increases someone's chances of developing cancer. The lesson then goes on to introduce the definition of cancer and identifies some of the parts of the body that cancer can most commonly affect. Pupils are then given, in pairs, the definition of malignant and benign tumours, they will need to teach their peer the definition of this word for their peer to write down - not just read it and copy it from the piece of paper! The slide will outline what happens if the cancer metastasises, there is a video demonstrating how cancer can spread from one part of the body to another. The next activity pupils are given a grid with symbols/diagrams on, pupils will need to identify the risk-factors of cancer that these diagrams represent. Some are a little more difficult than others, I have included the names of the more difficult ones on the board but you can it more/less challenging to suit the ability of your class. Once finished pupils can self-assess their work using red pens. For the plenary pupils will answer a past-paper question and then peer-assess their work.

This is a resource aimed at the NEW AQA GCSE Biology specification, developed to meet learning outcomes within the 'Infection & Response' unit. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by describing the process by which a bacteria may become resistant to an antibiotic. Pupils will then watch a storyboard animation which demonstrates this process visually. Pupils can then use this animation to create their own storyboard, including diagrams and captions, to represent the process of natural selection in bacteria which leads to antibiotic resistance. The focus of the lesson is then on MRSA, a few real-life headlines are given as an example of an antibiotic resistant bacteria. Pupils will brainstorm what sorts of methods hospitals employ to reduce the spread of such 'super bugs'. The final activity is for pupils to completed questions on antibiotic resistance and how to prevent the spread of antibiotic resistant bacteria such as MRSA. The mark scheme for the questions are included on the Power Point presentation for students to mark their own work or peer-assess. The plenary is a recap on the learning outcomes, pupils will need to assess whether they are R/A/G.

This is a lesson which meets specification points in the NEW AQA GCSE (2016) 'Cells' SoW. Other lessons from this SoW and other AQA GCSE Trilogy Sow for the new specification can be found in my TES shop. This lesson begins by watching a video about the structure of cells and where to find the genetic information, pupils will watch the video and answer questions (provided in the PowerPoint presentation.) Pupils will then be presented with a labelled diagram of a cell, nucleus, chromosome and gene. Pupils will be required to analyse the diagram for a few minutes (you can include a stop clock on the board). The screen will then be changed and pupils will be given a blank copy of the diagram which they will need to complete from memory - pupils can then peer-assess their work. In the next activity, pupils are shown diagrams of a cell with a nucleus visible, DNA, a gene and a chromosome. Pupils can either create a flow chart by cutting and sticking the diagrams in order from largest to smallest and then labelling them. Alternatively, they could draw their own diagrams and label them. Pupils can then self-assess their work using red pens. The next activity, pupils are given a series of words and definitions, they will need to match the key words up to the correct definition. Pupils then self-assess their work. Their are two option for the plenary activity, for lower ability classes pupils will be required to fill in the blanks in a paragraph describing the structure and function of genetic information and where it is found within the cell. The second plenary is a past-paper question, pupils can answer this in their books and then peer-assess using red pens. All resources are included, please leave a review with feedback :). Thanks!

This is a resource for the NEW AQA GCSE Biology specification, covering specification points within the ‘Infection and Response’ module. For more resources aimed at the NEW AQA GCSE specifications please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This resource contains the PowerPoint for the lesson, the resources are found at the end of the PowerPoint. The lesson begins with considering what is important in a new medicine and what scientists need to think about when developing new medicines. This goes on to define some of the key factors such as safety, efficacy & stability. Next, is an introduction of how a vaccination works, pupils will watch a video and answer questions on a worksheet. Pupils will self-asses their work. Pupils will then complete a cartoon strip of how a vaccination works, trying to use as many key words as possible. Pupils should self-assess their work against correct use of key terminology. The plenary will test the pupils knowledge of their ability to describe how a vaccine works. They will need to turn to the back of their books and describe how a vaccine works, using as many of the key terms as possible. Resources are all found at the end of the PowerPoint. Enjoy :)

This resource was produced for the AQA B2 Cells topic. It highlights the different organelles found in animal, plant, yeast and bacteria cells and the functions of each them. Students will observe posters of information, which I placed around the room, that they can then use to complete a levelled worksheet. Students then peer-assess their work and then complete a past-paper question on the subject.

A PowerPoint presentation and resources tailored for the AQA B2 specification whereby students firstly need to analyse their daily energy intake and expenditure and then complete a levelled worksheet by looking at information cards on the ways in which animals and plants can use energy. Students then complete a past-paper question and peer-asses their work. The worksheet for the lesson is attached and the other resources are at the end of the PowerPoint. I laminated these resources to re-use.

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. The lesson begins with a question for pupils to ‘Think > Pair > Share’ their ideas about what they already know about magnets. This can be discussed in a group, before feeding back to the classroom. Students will now complete a practical investigation: testing magnetic materials, in groups they will be given a selection of materials and a bar magnet, they will need to determine which materials are magnetic. Once complete, students can check their work against the answers provided. Next, students will investigate what happens when the poles of two bar magnets are brought together. Students will be given a set of combinations to try: N + N, S + N, S + S - attract or repel? Their results can be recorded in a table in their books and then be assessed using the mark scheme once complete. The next part of the lesson focuses on magnetic fields; firstly, students are shown the magnetic field of a bar magnet. They will have a go at drawing their own - they will have a worksheet, on it is lots of of circles surrounding a bar magnet, on each of the circles they will place a compass and then draw the direction the arrow is facing. Once complete, students should link up the arrows to show the direction of the magnetic field, they can stick this worksheet into their books. The last part of the lesson focuses on the magnetic field surrounding Earth, students are shown diagrams to demonstrate this idea and then will assess their knowledge of the subject by getting students to complete a fill-in-the-blanks task. This task can be self-assessed using the mark scheme provided in the PowerPoint presentation. The plenary task requires students to summarise what they have learned this lesson in three sentences. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 Module on ‘Particles & Their Behaviour’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to particles, describing the differences between materials which are made up of just one type of particle - a substance - and those that are made up of different particles - a mixture. Students are also introduced to the idea of properties of a substance as a description of the way in which a substance looks like and behaves. Students will then carry out a ‘Copy and Complete’ task where they will fill in the blanks to outline what they have learned about particles so far this lesson. This task can be self-assessed using the mark scheme provided on the PowerPoint presentation. Students are now introduced to the three states of matter - solid, liquid and gas. Students will firstly watch a video, using which they will need answer a set of questions about the arrangement of particles in a solid, liquid and a gas. The answers to this task are included in the PowerPoint for students to self-assess their work once it is complete. Next, students will draw a summary table into their books and will be given a card sort, students will need to sort the statements into the correct part of their table to describe the properties of solids/liquids/gases. The mark scheme for this task is included on the PowerPoint presentation, it can be used for pupils to self-assess their work. Lastly, students are given another set of statements describing the properties of solids/liquids/gases. Students need to draw a Venn diagram into their books and will need to sort the statements into the Venn diagram, this task can be marked and corrected once complete. The plenary task requires students to unscramble a set of anagrams, each anagram is a key word learned from this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be shown a demonstration of magnesium being burnt in air, students are asked to predict whether they think the mass of the product will increase, decrease or stay the same. Students are asked to explain their prediction. The demonstration is then carried out, students should record in their books the mass of the magnesium before burning and then the mass of the magnesium oxide after burning, from this they can deduce the mass of the oxygen needed to burn the magnesium. Students can then check their predictions to see if they were correct or not. Now, students can summarise what they have learned by completing a ‘fill-in-the-blank’ task which is a definition for the ‘conservation of mass’ in chemical reactions. This task can be self-assessed against the mark scheme provided. Students will now also complete a ‘Quick Check’ task where they are asked come questions to test their knowledge of what they have learned so far, this work can also be marked against the mark scheme provided. Students will not complete a match-up task, students are asked to complete the sentences by matching the correct phrases together. This helps students to explore the idea of the law of the conservation of mass, considering how this applies to reactions involving solids, liquids and gases. Again, the mark scheme for this task is included for students to check and correct their work. The latter part of the lesson is on balancing equations, students are firstly introduced to the process by which students should balance an equation, demonstrated by the example of magnesium + oxygen -> magnesium oxide. A few more examples are used to talk students through the process, then students will complete a step-by-step worksheet which introduces them to balancing equations at a basic level. The mark scheme for this task is included in the PowerPoint for students to self-assess their work. The plenary task requires students to complete a 3-2-1 reduction of the lesson, to include 3 facts 2 key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a ‘Think, Pair, Share’ task for students to discuss amongst themselves - ‘Why can’t muscles continiously carry out aerobic respiration?’ After a short class discussion, the answer to this questions can be revealed to the class. Students will then complete a fill-in-the-blank task to summarise what they have learned about anaerobic respiration so far, this work can be self-assessed using the mark scheme provided. Students will now watch a video on anaerobic respiration, whilst students are watching this video they will need to answer a set of questions. This task can then be self-assessed using the mark scheme provided on the PowerPoint presentation. Students will now look at how anaerobic respiration is carried in different organisms, particularly plants and yeast, focusing on the importance of anaerobic respiration in yeast for food production. Next, students knowledge of aerobic and anaerobic respiration is assessed using a true or false activity, this task can be marked and corrected using the answers provided on the PowerPoint. The last activity is a set of exam-style questions, students can use their knowledge from this lesson to answer this set of questions in their books. This work can then be self-assessed using the mark scheme provided. The plenary activity requires students to come up with a list of questions for a list of answers which are provided for them in the plenary. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction into how sound can be ‘seen’ by using an oscilloscope. The PowerPoint then moves on to look at the differences between the ‘intensity’ of a sound and the ‘pitch’ of the sound. Students can copy and complete a set of sentences to summarise what they have learned so far as part of a ‘progress check’ - this work can then be marked using the mark scheme included. Students will then be given two different sound waves, they will need to use what they have learned so far to write a description/comparison of each of the waves, a list of key words will be provided to hep students. A model answer to this question is included in the PowerPoint so students can self-assess their work once it is complete. Students will now be given a worksheet of sound waves, along with a worksheet describing the sounds collected by the ‘Most Haunted’ team of a range of ghost sounds. Students will need to compare the description of the ghosts to the sound waves collected and match them correctly. This work can then be marked and corrected using the answers provided on the PowerPoint. Students will now think about the frequencies that humans can hear compared to other animals. The first activity requires students to watch a video which plays a set of sounds starting with a frequency of 500 Hz to 20,000 Hz. Students can put their hands up in the air until they can no longer hear the sound, you will need to turn the volume right up! Students are then told the audible range of humans compared to other animals like dolphins, hedgehogs and bats. The plenary activity requires students to complete a set of sentences, including outlining what they have learned today, what they already knew and what they would like to know more about. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a ‘Think > Pair > Share’ activity which requires students to consider the definition for the term ‘evolution’. After students have had some time to talk about this, their ideas can be shared with the class and the answer can be revealed for students to check and correct their work. This leads into an introduction to the fossil record as means of evidence for evolution, students will then need watch a video on the formation of fossils - during which they will answer a set of questions. Students can now mark and assess their work using the mark scheme provided. Students will now be introduced to the idea of ‘Natural Selection’, they will be told the mechanism by which this works by using the example of girraffes with longer and shorter necks. Students will now be asked to complete a cartoon strip to summarise this process, once this task has been completed students will be able to mark and assess their work using the answers provided in the PowerPoint presentation. The last part of the lesson students will be shown a video on examples of natural selection in action. Whilst watching this video, students will need to answer a set of questions, once this has been completed students can self-assess their work using the answers provided. The plenary task requires students to write three quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy. The lesson begins with an introduction to the law of the conservation of energy, students are told that energy cannot be created or destroyed but it can be stored and transferred. Next, students are introduced to the five main energy stores, students are asked to match the correct names to the photos displayed. This task can then be self-assessed using the mark scheme provided. Next, students are introduced to the ways in which energy can be transferred - via light waves, sound waves and electricity. They will be shown an energy transfer diagram, depicting the energy transfers which take place within a torch. Once students have seen the complete diagram, they will then have a go at completing it themselves, using the statements provided. This task can the be marked against the mark scheme provided. Students will then complete two further energy diagrams to display the energy transfers taking place within a candle and TV. The answers to this task are also included in the PowerPoint presentation so students can self-assess their work using the mark scheme provided. Lastly, students will complete an investigation into the height a ball bounces back up to after it has been dropped from a height. Students will work in groups of three, following the instructions provided on the PowerPoint to complete the results table provided. Students will then need to answer a set of questions using the data they collected from the investigation. This can be self-assessed using the mark scheme provided. The plenary task requires students to complete one of the sentence starters, to summarise what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the Periodic Table, students will be shown a diagram of the Periodic Table and will be asked to identify whether they think certain elements are metals or non-metals, or even semi-metals (metalloids). This task can the be checked and assessed against the answers provided on the PowerPoint. Next, students will be given part of a table of information on the properties of metals compared to non-metals. They will need to walk around the room and trade information with others in order to successfully complete their own table. Once this task has been completed, students can self-assess their work using the mark scheme provided. Students are now shown a diagram of an iron roof and a copper roof and how this can change over time, students are asked to think about what is happening in these picture & try to identify the chemical reaction. After a short class discussion, the answers to the questions will then be revealed. Students will then be told that non-metals react in a similar way with oxygen, they will then be shown 4 incomplete word equations for the reaction of different non-metals with oxygen. Students will need to complete this equation, this task can the self-assessed using the mark scheme provided. The last activity is a true or false activity, students will need to identify whether the statements about metals/non-metals are true or false. This task can the be marked using the mark scheme provided. The plenary task is an exit card, students will need to write down three key words, one fact and a question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)