Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall that imperfections can lead to cracks forming in a material. Describe how tension is expressed in a material and how cracks can lead to a concentration of stress which eventually leads to brittle fractures. Justify why creep and fatigue are factors that must be accounted for by engineers. The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

A comprehensive lesson which teaches students about Hooke’s law, the spring constant equation, Stress strain graphs and how to calculate Young’s modulus based on this. Lesson is tailored towards the AQA A-level physics specification - Mechanics and Applied Science level 3 Edexcel Unit 5 Physics. By the end of the lesson learners should be able to: LO: Evaluate stress/strain graphs to discern brittle, ductile and malleable objects. Success criteria: SC1: Recall the trends shown during a strain/stress curve. SC2: Compare malleability and ductility. SC3: Explain why malleability and ductility are important in producing, tubes, screw caps and lead sheets. For the a-level content: as a separate document included as pdf. Contains past paper questions that target this topic, some questions require knowledge from prior lessons. There is also a guide attached with written walkthroughs of how to reach the final answer, even for those tricky 1 mark questions. For the BTEC applied science level 3: The resource contains past paper questions and mark scheme answers attached to the slides. Powerpoint contains 27 slides and 9 past paper questions. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

A comprehensive lesson which teaches students about Hooke’s law, the spring constant equation, Stress strain graphs and how to calculate Young’s modulus based on this. Lesson is tailored towards the AQA A-level physics specification - Mechanics and Applied Science level 3 Edexcel Unit 5 Physics. LO: To evaluate stress/strain graphs to determine Young’s modulus and apply this to situations. By the end of the lesson learners should be able to: Success criteria: SC1: Recall Hooke’s law and identify limits of proportionality and plastic deformation on a graph. SC2: Describe how to calculate Young’s Modulus from a tensile stress-strain curve. SC3: Explain why rubber is effective at cushioning shocks. For the a-level content: as a separate document included as pdf. Contains past paper questions that target this topic, some questions require knowledge from prior lessons. There is also a guide attached with written walkthroughs of how to reach the final answer, even for those tricky 1 mark questions. For btec unit 5 applied science: questions are on the slides following the lesson. Powerpoint contains 27 slides and 12 past paper questions.

Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall the equipment needed for moving heat. Describe how altering the set-up of the system can lead to refrigeration or a heat pump being created. Use the coefficient of performance calculations for a heating system. The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall the equations for efficiency. Describe how to calculate efficiency by using heat in and heat out. Explain how the Carnot Revolution equation is derived. The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall the Carnot cycle. Describe how an internal combustion engine works. Explain why latent heat is needed in a steam turbine. The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall the second law of thermodynamics. Describe what is meant by natural processes and entropy. Compare adiabatic and isothermal processes. The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall a system in which work and heat is used. Describe the first law of thermodynamics Calculate specific heat and specific latent heat The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall the ideal gas equation. Describe how scientists calculated absolute zero. Evaluate different thermometers. The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall what is meant by temperature and thermal energy. Describe what is meant by heat flow. Compare sensible and latent heat. The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics. By the end of the lesson learners should be able to: Recall the equations involving work done by movement and work done by pressure expansion. Describe how the area of cylinder heads affect the movement of fluids in hydraulics. Use multiple equations to calculate the work, force and distance moved by hydraulic cylinders. The resource contains past paper questions and mark scheme answers. Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.

A comprehensive collection of materials needed to deliver the entire Pearsons Edexcel Applied Science National Foundation Diploma Level 3. The materials include: A fully written scheme of work. Full lessons for each lesson / concept. A unit grade calculator based on the Edexcel grade calculator online that will easily let you calculate final grades for students. Revision mind maps for end of unit (for examined unit 1) The units covered in this scheme are: Year 12 units are: Principles and application of Science for Biology chemistry and physics. Practical Scientific procedures and techniques. Science Investigation skills Laboratory techniques and their application. Year 13 units are: Physiology of human body systems. Human regulation and reproduction It does not include due to copyright infringements: Assignment briefs, assessment records, IV documents. These are all freely accessible on the Edexcel Website.

A comprehensive collection of materials needed to deliver the entire Pearsons Edexcel Combined Science (9-1) curriculum. Following the Activelearn curriculum. The materials include: A fully written scheme of work. Full lessons for each lesson / concept. Revision mind maps for end of units. Some core practical resources are still in the process of being completed (this resource will be updated as soon as these are updated) It does not include due to copyright infringements: The end of unit tests from Activelearn.

Resource prepared for BTEC Applied science Level 3 - Unit 3. By the end of the lesson learners should be able to: Identify circuit symbols. Describe how energy usage can be calculated. Explain why fuses are used.

Resource prepared for BTEC Applied science Level 3 - Unit 3. By the end of the lesson learners should be able to: Identify factors that influence plant distribution and growth. Describe how to sample plant distribution. Explain the drawbacks of different types of sampling.

By the end of the lesson learners should be able to: Identify independent, dependent and control variables. Describe what makes a good method. Evaluate data from tables.

By the end of the lesson learners should be able to: Recall the equipment needed to carry out electrolysis. Describe the effect of voltage on product. Explain the reasoning for this.

By the end of the lesson learners will be able to: State what is meant by an isotope. Describe how atoms of different elements are different (in terms of numbers of electrons and protons). Explain why all atoms have no overall charge.

By the end of the lesson learners will be able to: Recall when electrons can change orbit. Describe how ionisation occurs. Describe some of the evidence for the Bohr model of the atom.