A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
This fully-resourced lesson describes the three main stages of the Calvin cycle as fixation, reduction and regeneration. The detailed PowerPoint and accompanying resources have been designed to cover the content of point 13.1 (g) of the CIE A-level Biology specification and detailed planning ensures that continual links are made to the previous lesson on the light-dependent stage so that students understand how the products of that stage, ATP and reduced NADP, are essential for the Calvin cycle
The lesson begins with an existing knowledge check where the students are challenged to recall the names of structures, substances and reactions from the light-dependent stage in order to reveal the abbreviations of the main 3 substances in the Calvin cycle. This immediately introduces RuBP, GP and TP and students are then shown how these substances fit into the cycle. The main section of the lesson focuses on the three phases of the Calvin cycle and time is taken to explore the key details of each phase and includes:
The role of RuBisCO in carbon fixation
The role of the products of the light-dependent stage, ATP and reduced NADP, in the reduction of GP to TP
The use of the majority of the TP in the regeneration of RuBP
A step-by-step guide, with discussion points where the class are given time to discuss the answer to selected questions, is used to show how 6 turns of the cycle are needed to form the TP that will then be used to synthesise 1 molecule of glucose. A series of exam-style questions are included at appropriate points of the lesson and this will introduce limiting factors as well as testing their ability to answer questions about this stage when presented with an unfamiliar scientific investigation. The mark schemes are included in the PowerPoint so students can assess their understanding and any misconceptions are immediately addressed.
This lesson describes the light-dependent stage, focusing on photoactivation of chlorophyll, photolysis of water and the production of ATP and reduced NADP. The detailed PowerPoint and accompanying resources have been designed to cover the details of point 13.1 (f) of the CIE A-level Biology specification and also describes cyclic and non-cyclic photophosphorylation
The light-dependent stage of photosynthesis is a process which students can find difficult to understand in the necessary detail so this lesson has been planned to walk them through all of the key details. Time is taken to describe the roles of the major protein complexes that are embedded in the thylakoid membrane and this includes the two photosystems, the cytochrome proton pump and ATP synthase. A series of exam-style questions have been written that link to other biological topics in this course such as eukaryotic cell structures and membrane transport as well as application questions to challenge them to apply their understanding. Some of these resources have been differentiated to allow students of differing abilities to access the work and to be pushed at the same time. Students will learn that there are two pathways that the electron can take from PSI and at the completion of the two tasks which describe each of these pathways, they will understand how ATP is generated in non-cyclic and cyclic photophosphorylation. The final task of the lesson asks them to compare these two forms of photophosphorylation to check that they understand when photolysis is involved and reduced NADP is formed.
Due to the detail included in this lesson, it is estimated that it will take up to 3 hours of allocated A-level teaching time to complete.
This lesson describes the structure of the chloroplast, focusing on the sites of the light-dependent and light-independent stages of photosynthesis. This fully-resourced lesson, which consists of an engaging PowerPoint and accompanying resources, has been designed to cover points 13.1 (a) & (b) of the CIE A-level Biology specification and has been specifically designed to introduce students to the grana and stroma as the site of the light-dependent and light-independent stages respectively before they are covered in greater detail in the lessons that are taught later in topic 13.1.
Students were introduced to eukaryotic cells and their organelles in topic 1 so this lesson has been written to test and to build on that knowledge. A version of the quiz show POINTLESS runs throughout the lesson and this maintains engagement whilst challenging the students to recall the parts of the chloroplast based on a description which is related to their function. The following structures are covered in this lesson:
double membrane
thylakoids (grana)
stroma
intergranal lamellae
starch grains
chloroplast DNA and ribosomes
Once each structure has been recalled, a range of activities are used to ensure that key details are understood such as the role of the thylakoid membranes in the light-dependent reactions and the importance of ATP and reduced NADP for the reduction of GP to TP in the Calvin cycle. Links to other topics are made throughout and this is exemplified by the final task of the lesson where students are challenged on their recall of the structure, properties and function of starch, as originally covered in topic 2.2
It’s no coincidence that cell structure and biological molecules find themselves as topics 1 and 2 of the CIE A-level Biology course, because a clear understanding of their content is absolutely critical to promote success with the 17 topics that follow.
Hours and hours of intricate planning has gone into the 18 lessons included in this bundle to ensure that the detailed content is relevant and can be understood and that links are made to related sections of topics 3 - 19. The lesson PowerPoints and accompanying resources contain a wide range of activities that include:
differentiated exam-style questions with clear mark schemes
directed discussion points
quiz competitions to introduce key terms and values
current understanding and prior knowledge checks
Due to the detail included in these lessons, it is estimated that it will take in excess of 2 months of allocated teaching time to cover the content of the resources
A number of the resources have been shared for free so these can be downloaded in order to sample the quality of the lessons
This lesson bundle contains 6 fully-resourced lessons which have been designed to engage and motivate the students whilst covering the detailed content of topic 3 (Enzymes) in the CIE A-level Biology specification. These globular proteins catalyse biological reactions throughout living organisms so a deep understanding of this topic is important for all of the other 18 topics in this course.
The wide range of activities that are included within the lesson PowerPoints and accompanying resources will cover the following specification points:
Enzymes are globular proteins that catalyse reactions
The mode of action of enzymes
The lock and key hypothesis and the induced-fit model
The effect of temperature on the rate of an enzyme-catalysed reaction
The effect of pH on the rate of an enzyme-catalysed reaction
The effect of enzyme and substrate concentration on the rate of an enzyme-catalysed reaction
The effect of inhibitor concentration on the rate of an enzyme-catalysed reaction
The effect of competitive and non-competitive inhibitors on enzyme activity
Immobilising an enzyme in alginate
This lesson describes how enzymes can be immobilised in calcium alginate and compares their activity against enzymes that are free in solution. The PowerPoint and the accompanying resources have been designed to cover point 3.2 (d) of the CIE A-level Biology specification.
The lesson has been planned to challenge the students on their ability to apply knowledge to a potentially unfamiliar situation. A series of exam-style questions which include “suggest” and “describe and explain” questions are used throughout the lesson and these will allow the students to recognise the advantages and disadvantages of a particular method. Although the alginate method is the only one referenced in this specification point, the adsorption and covalent bonding methods are introduced and then briefly analysed to allow students to understand that a matrix doesn’t involve these bonds which could disrupt the active site. The remainder of the lesson introduces some actual examples of the use of immobilised enzymes with the aim of increasing the relevance.
Please note that this lesson has been written to explain the effect of immobilisation on enzyme activity. The practical element of carrying out the investigation is described in a separate lesson.
This lesson describes and explains how increasing the concentration of inhibitors affects the rate of an enzyme-catalysed reaction. The PowerPoint and accompanying resource are the last in a series of 4 lessons which cover the content detailed in point 3.2 (a) of the CIE A-level Biology specification but this lesson also covers point 3.2 [c] as competitive and non-competitive inhibitors are introduced and their differing effects on enzyme activity described and explained.
The lesson begins with a made up round of the quiz show POINTLESS called “Biology opposites” and this allows students to recognise that inhibition is the opposite of stimulation. This introduces inhibitors as substances that reduce the rate of a reaction and students are challenged to use their general knowledge of enzymes to identify that inhibitors prevent the formation of the enzyme-substrate complex. Moving forwards, a quick quiz competition generates the abbreviation EIC (representing enzyme-inhibitor complex) and this introduces competitive inhibitors as substances that occupy the active site. The students are asked to apply their knowledge to a new situation to work out that these inhibitors must have a similar shape to the enzyme’s substrate molecule. A series of exam-style questions are used throughout the lesson and at this point, the students are challenged to work out that an increase in the substrate concentration would reduce the effect of a fixed concentration of a reversible competitive inhibitor. The rest of the lesson focuses on non-competitive inhibitors and time is taken to ensure that key details such as the disruption of the tertiary structure is understood and biological examples are used to increase the relevance. Again, students will learn that increasing the concentration of the inhibitor results in a greater inhibition and a reduced rate of reaction but that increasing the substrate concentration cannot reduce the effect as was observed with competitive inhibitors.
This lesson describes and explains the effect of an increasing temperature on the rate of an enzyme-catalysed reaction. The PowerPoint and the accompanying resource are part of the 1st lesson in a series of 4 which cover the content detailed in point 3.2 (a) of the CIE A-level Biology specification and this lesson has been specifically planned to tie in with the lesson in 3.1 where the properties of enzymes and their mechanism of action were introduced.
The lesson begins by challenging the students to recognise optimum as a key term from its 6 synonyms that are shown on the board. Time is taken to ensure that the students understand that the optimum temperature is the temperature at which the most enzyme-product complexes are produced per second and therefore the temperature at which the rate of an enzyme-controlled reaction works at its maximum. The optimum temperatures of DNA polymerase in humans and in a thermophilic bacteria and RUBISCO in a tomato plant are used to demonstrate how different enzymes have different optimum temperatures and the roles of the latter two in the PCR and photosynthesis are briefly described to prepare students for these lessons in topics 19 and 13.
Moving forwards, the rest of the lesson focuses on enzyme activity at temperatures below the optimum and at temperatures above the optimum. Students will understand that increasing the temperature increases the kinetic energy of the enzyme and substrate molecules, and this increases the likelihood of successful collisions and the production of enzyme-substrate and enzyme-product complexes. When considering the effect of increasing the temperature above the optimum, continual references are made to the previous lesson and the control of the shape of the active site by the tertiary structure. Students will be able to describe how the hydrogen and ionic bonds in the tertiary structure are broken by the vibrations associated with higher temperatures and are challenged to complete the graph to show how the rate of reaction decreases to 0 when the enzyme has denatured.
Please note that this lesson has been designed specifically to explain the relationship between the change in temperature and the rate of reaction and not the practical skills that would be covered in a core practical lesson
This fully-resourced lesson describes how enzymes function intracellularly and extracellularly and explains their mode of action. The engaging PowerPoint and accompanying resources have been designed to cover points 3.1 (a, b & c) and considers the details of Fischer’s lock and key hypothesis and Koshland’s induced-fit model and explains how an enzyme’s specificity is related to their 3D structure and enables them to act as biological catalysts.
The lesson has been planned to tie in with topic 2.3, and to challenge the students on their knowledge of protein structure and globular proteins. This prior knowledge is tested through a series of exam-style questions along with current understanding and mark schemes are included in the PowerPoint so that students can assess their answers.
Students will learn that enzymes are large globular proteins which contain an active site that consists of a small number of amino acids. Emil Fischer’s lock and key hypothesis is introduced to enable students to recognise that their specificity is the result of an active site that is complementary in shape to a single type of substrate. Time is taken to discuss key details such as the control of the shape of the active site by the tertiary structure of the protein. The induced-fit model is described so students can understand how the enzyme-susbtrate complex is stabilised and then students are challenged to order the sequence of events in an enzyme-controlled reaction.
The lesson finishes with a focus on ATP synthase and DNA polymerase so that students are aware of these important intracellular enzymes when learning about the details of respiration and DNA replication before they are challenged on their knowledge of carbohydrates, lipids and proteins from topics 1.2 - 1.4 as they have to recognise some extracellular digestive enzymes from descriptions of their biological molecule substrates.
This lesson describes and explains how increasing the concentration of inhibitors affects the rate of an enzyme-controlled reaction. The PowerPoint and accompanying resource are the last in a series of 5 lessons which cover the content detailed in point 1.4.2 of the AQA A-level Biology specification and describes the effect of both competitive and non-competitive inhibitors.
The lesson begins with a made up round of the quiz show POINTLESS called “Biology opposites” and this will get the students to recognise that inhibition is the opposite of stimulation. This introduces inhibitors as substances that reduce the rate of a reaction and students are challenged to use their general knowledge of enzymes to identify that inhibitors prevent the formation of the enzyme-substrate complex. Moving forwards, a quick quiz competition generates the abbreviation EIC (representing enzyme-inhibitor complex) and this introduces competitive inhibitors as substances that occupy the active site. The students are asked to apply their knowledge to a new situation to work out that these inhibitors have a similar shape to the enzyme’s substrate molecule. A series of exam-style questions are used throughout the lesson and at this point, the students are challenged to work out that an increase in the substrate concentration would reduce the effect of a fixed concentration of a reversible competitive inhibitor. The rest of the lesson focuses on non-competitive inhibitors and time is taken to ensure that key details such as the disruption of the tertiary structure is understood and biological examples are used to increase the relevance. Again, students will learn that increasing the concentration of the inhibitor results in a greater inhibition and a reduced rate of reaction but that increasing the substrate concentration cannot reduce the effect as was observed with competitive inhibitors.
This lesson describes and explains how increasing the temperature affects the rate of an enzyme-controlled reaction. The PowerPoint and the accompanying resource have been designed to cover the second part of point 1.4.2 of the AQA A-level Biology specification and ties in directly with the previous lesson on the properties of enzymes and their mechanism of action.
The lesson begins by challenging the students to recognise optimum as a key term from its 6 synonyms that are shown on the board. Time is taken to ensure that the students understand that the optimum temperature is the temperature at which the most enzyme-product complexes are produced per second and therefore the temperature at which the rate of an enzyme-controlled reaction works at its maximum. The optimum temperatures of DNA polymerase in humans and in a thermophilic bacteria and RUBISCO in a tomato plant are used to demonstrate how different enzymes have different optimum temperatures and the roles of the latter two in the PCR and photosynthesis are briefly described to prepare students for these future lessons.
Moving forwards, the rest of the lesson focuses on enzyme activity at temperatures below the optimum and at temperatures above the optimum. Students will understand that increasing the temperature increases the kinetic energy of the enzyme and substrate molecules, and this increases the likelihood of successful collisions and the production of enzyme-substrate and enzyme-product complexes. When considering the effect of increasing the temperature above the optimum, continual references are made to the previous lesson and the control of the shape of the active site by the tertiary structure. Students will be able to describe how the hydrogen and ionic bonds in the tertiary structure are broken by the vibrations associated with higher temperatures and result in an active site that is no longer complementary to the substrate. Key terminology such as denaturation is used throughout.
Please note that this lesson has been designed specifically to explain the relationship between the change in temperature and the rate of reaction and not the practical skills that would be covered in a core practical lesson
This fully-resourced lesson explains how an enzyme’s specificity is related to their 3D structure and enables them to act as biological catalysts. The engaging PowerPoint and accompanying resources have been designed to cover the first parts of specification point 1.4.2 and considers the details of Fischer’s lock and key hypothesis and Koshland’s induced-fit model to deepen student understanding of the mechanism of enzyme action
The lesson has been specifically planned to tie in with related topics that were previously covered such as protein structure and globular proteins. This prior knowledge is tested through a series of exam-style questions along with current understanding and mark schemes are included in the PowerPoint so that students can assess their answers.
Students will learn that enzymes are large globular proteins which contain an active site that consists of a small number of amino acids. Emil Fischer’s lock and key hypothesis is introduced to enable students to recognise that their specificity is the result of an active site that is complementary in shape to a single type of substrate. Time is taken to discuss key details such as the control of the shape of the active site by the tertiary structure of the protein. The induced-fit model is described so students can understand how the enzyme-susbtrate complex is stabilised and then students are challenged to order the sequence of events in an enzyme-controlled reaction.
The lesson finishes with a focus on ATP synthase and DNA polymerase so that students are aware of these important intracellular enzymes when learning about the details of respiration and DNA replication before they are challenged on their knowledge of carbohydrates, lipids and proteins from topics 1.2 - 1.4 as they have to recognise some extracellular digestive enzymes.
This engaging lesson describes how the structure of the mammalian lung is adapted for rapid gaseous exchange. The PowerPoint has been designed to cover point 2.1 (iii) of the Pearson Edexcel A-level Biology A specification and focuses on the essential features of the alveolar epithelium as well as the mechanism of ventilation to maintain a steep concentration gradient for the simple diffusion of oxygen and carbon dioxide.
Gas exchange at the alveoli is a topic that was covered at GCSE and considered during the previous lessons in topic 2.1 so this lesson has been written to challenge the recall of that knowledge and then to build on it. The main focus of the first half of the lesson is the type of epithelium found lining the alveoli and students will discover that a single layer of flattened cells known as simple, squamous epithelium acts to reduce the diffusion distance.
The following features of the alveolar epithelium are also covered:
Surface area
Moist lining
Production of surfactant
The maintenance of a steep concentration gradient is the role of the respiratory system and the next part of the lesson focuses on the diaphragm and intercostal muscles. As the mechanism of inhalation is a cascade of events, the details of this process are covered in a step by step format using bullet points. At each step, time is taken to discuss the key details which includes an introduction to Boyle’s law that reveals the inverse relationship between volume and pressure. It is crucial that students are able to describe how the actions of the diaphragm, external intercostal muscles and ribcage result in an increased volume of the thoracic cavity and a subsequent decrease in the pressure, which is below the pressure outside of the body. At this point, their recall of the structures of the mammalian gas exchange system is tested, to ensure that they can describe the pathway taken by air when moving into the lungs.
This fully-resourced lesson describes the action of enzymes as biological catalysts and explains how their specificity is related to their 3D structure. The engaging PowerPoint and accompanying resources have been designed to cover points 2.10 (i) and (ii) of the Pearson Edexcel A-level Biology A specification but also introduces some examples of intracellular and extracellular enzymes to prepare students for the next lesson which covers 2.10 (iii).
The lesson has been specifically planned to tie in with related topics that were previously covered such as protein structure, globular proteins and intracellular enzymes. This prior knowledge is tested through a series of exam-style questions along with current understanding and mark schemes are included in the PowerPoint so that students can assess their answers.
Students will learn that enzymes are large globular proteins which contain an active site that consists of a small number of amino acids. Emil Fischer’s lock and key hypothesis is introduced to enable students to recognise that their specificity is the result of an active site that is complementary in shape to a single type of substrate. Time is taken to discuss key details such as the control of the shape of the active site by the tertiary structure of the protein. The induced-fit model is described so students can understand how the enzyme-susbtrate complex is stabilised and then students are challenged to order the sequence of events in an enzyme-controlled reaction.
The lesson finishes with a focus on ATP synthase and DNA polymerase so that students are aware of these important intracellular enzymes when learning about the details of respiration and DNA replication.
The 5 lesson PowerPoints and multiple accompanying resources that are included in this bundle are highly-detailed and engaging. A wide variety of tasks, which include exam-style questions, differentiated tasks, discussion points and quiz competitions will check on the student understanding of the following specification points in topic 4.4 of the Edexcel A-level Biology B specification:
The structure of the heart, arteries, veins and capillaries
The advantages of a double circulatory system
The sequence of events of the cardiac cycle
The roles of the SAN, AVN and the bundle of His in the myogenic stimulation of the heart
Interpreting ECG traces and pressure changes in the cardiac cycle
The role of platelets and plasma proteins in the sequence of events leading to blood clotting
The heart & blood vessels and the double circulatory system lesson have been uploaded for free so you can sample the quality of this bundle by downloading those
This bundle of 4 fully-resourced lessons have been planned to include a wide variety of tasks which will engage and motivate the students whilst covering the following points as detailed in topic 4.2 of the Edexcel A-level Biology B specification:
The structure of the cell surface membrane, with reference to the fluid mosaic model
Passive transport is brought about by diffusion and facilitated diffusion
Passive transport is brought about by osmosis
The relationship between the properties of molecules and the method by which they are transported
Large molecules can be transported in and out of cells by endocytosis and exocytosis
The process of active transport and the role of ATP
The phosphorylation of ADP and the hydrolysis of ATP
If you would like to sample the quality of the lessons in this bundle, then download the ATP & active transport lesson as this has been shared for free
The wide variety of tasks that are written into the 18 lesson PowerPoints and accompanying resources that are included in this lesson bundle will engage and motivate the students whilst covering the detailed content of topic 4 of the Edexcel A-level Biology B specification (Exchange and transport).
The following specification points are covered by these lessons:
Understand how the surface area to volume ratio affects the transport of molecules in living organisms
Understand why organisms need a mass transport system and specialised gas exchange surfaces as they increase in size
The structure of the cell surface membrane
Passive transport is brought about by diffusion and facilitated diffusion
Passive transport is brought about by osmosis
Understand how the properties of molecules affects how they are transported
Large molecules are transported in and out of cells by endocytosis and exocytosis
The process of active transport
The phosphorylation and hydrolysis of ATP
Understand how insects, fish and mammals are adapted for gas exchange
The structure of the heart, arteries, veins and capillaries
The advantages of the double circulatory system
The sequence of events of the cardiac cycle
The myogenic stimulation of the heart
Interpreting ECG traces
The role of platelets and plasma proteins in the sequence of events leading to blood clotting
The structure of haemoglobin in relation to its role in the transport of respiratory gases
The Bohr effect
The dissociation curve of haemoglobin
The significance of the oxygen affinity of foetal haemoglobin
The similarities and differences between the structure and function of haemoglobin and myoglobin
The formation and reabsorption of tissue fluid
Know that tissue fluid that is not reabsorbed is returned to the blood via the lymph
The structure of the xylem and phloem in relation to their role in transport
The movement of water by the apoplastic and symplastic pathways
The cohesion-tension model
Hours and hours has gone into the intricate planning of all of these lessons and the quality can be sampled by downloading the following lessons which have been uploaded for free:
Surface area to volume ratio
ATP, active transport, endocytosis and exocytosis
Structure of the heart, arteries, veins and capillaries
Double circulatory system
Apoplastic and symplastic pathways
This fully-resourced lesson describes how the cohesion-tension model explains the transport of water from the roots to the shoots. The detailed PowerPoint and accompanying resources have been designed to cover point 4.7 (iii) of the Edexcel A-level Biology B specification
This lesson has been written to follow on from the end of the previous lesson, which finished with the description of the transport of the water and mineral ions from the endodermis to the xylem. Students are immediately challenged to use this knowledge to understand root pressure and the movement by mass flow down the pressure gradient. Moving forwards, time is taken to study the details of transpiration pull and then the main focus is the interaction between cohesion and tension. The role of adhesive forces in capillary action is also explained. Understanding is constantly checked through a range of tasks and prior knowledge checks are also written into the lesson to challenge the students to make links to previously covered topics such as the structure of the transport tissues.
This detailed lesson describes how water can be moved through plant cells by the apoplastic and symplastic pathways. The engaging PowerPoint and accompanying resource have been designed to cover point 4.7 (ii) of the Edexcel A-level Biology B specification and includes a description of the movement from the endodermis to the xylem to tie in with the following lesson on the cohesion-tension model.
The lesson begins by looking at the specialised features of the root hair cell to allow students to understand how these epidermal cells absorb water and mineral ions from the soil. Moving forwards, students are introduced to key terminology such as epidermis and root cortex before time is taken to look at the different pathways that water and minerals use to transverse across the cortex. Discussion points are included throughout the lesson to encourage the students to think about each topic in depth and challenges them to think about important questions such as why the apoplastic pathway is needed for the water carrying the ions. Students will be introduced to the Casparian strip and will learn how this layer of cells blocks the apoplastic pathway. A step by step method using class questions and considered answers is used to guide them through the different steps and to support them when writing the detailed description.
This lesson describes the relationship between the structure and function of the xylem and phloem in transport. The engaging and detailed PowerPoint and accompanying resources have been designed to cover point 4.7 (i) of the Edexcel A-level Biology B specification.
The lessons begins by challenging the students to identify the substances that a plant needs for the cellular reactions, where they are absorbed and where these reactions occur in a plant. The aim of this task is to get the students to recognise that water and mineral ions are absorbed in the roots and needed in the leaves whilst the products of photosynthesis are in the leaves and need to be used all over the plant. Students will be reminded that the xylem and phloem are part of the vascular system responsible for transporting these substances and then the rest of the lesson focuses on linking structure to function. A range of tasks which include discussion points, exam-style questions and quick quiz rounds are used to describe how lignification results in the xylem as a hollow tube of xylem cells to allow water to move as a complete column. They will also learn that the narrow diameter of this vessel allows capillary action to move water molecules up the sides of the vessel. The same process is used to enable students to understand how the structures of the companion cells allows assimilates to be loaded before being moved to the sieve tube elements through the plasmodesmata.
