A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the sub-topics found within Topic C6 (Groups in the Periodic table) of the Edexcel GCSE Combined Science specification.
The sub-topics and specification points that are tested within the lesson include:
Describe the reactions of lithium, sodium and potassium with water
Describe the pattern of reactivity in the alkali metals and explain this pattern in terms of electronic configurations
Describe the reactions of the halogens to form metal halides
Explain the reactivity of the halogens in terms of electronic configurations
Explain why the noble gases are chemically inert
Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams
This lesson describes how the limiting reactant controls the mass of the product formed and explains how to deduce the stoichiometry. The PowerPoint and accompanying worksheet, which is differentiated, have been designed to cover points 1.52 & 1.53 of the Edexcel GCSE Chemistry specification and also covers those points in the Chemistry section of the Combined Science course. Step by step guides are used to go through worked examples so students are able to visualise how to set out their work.
The lesson begins with a fun analogy involving sausages and potatoes so that students can identify that the potatoes limited the sale of food. Alongside this, students will learn the key term excess. Some time is then taken to ensure that students can spot the limiting reactant and the one in excess in actual chemical reactions and method descriptions. Moving forwards, students will be guided through two calculations that involve limiting reactants - those to calculate the theoretical yield and the other to calculate a balanced symbol equation. Other skills involved in these calculations such as calculating the relative formula mass are recalled and a few examples given to ensure they are confident. The question worksheet has been differentiated two ways so that any students who need extra assistance can still access the learning.
This lesson describes the effects of pH on the rate of an enzyme-catalysed reaction. The PowerPoint and accompanying resources are part of the second lesson in a series of 4 lessons which have been designed to cover the content of point 3.2 (a) of the CIE A-level Biology specification.
The lesson begins with a short discussion, where the students are challenged to identify how the stomach and the small intestine differ in terms of a particular condition and to explain why the conditions in these neighbouring digestive organs are so important. This introduces pepsin and trypsin and these protease enzymes play a key role throughout the lesson as they are good examples of how different extracellular enzymes have different optimum pH values (which are not necessarily 7.0). Moving forwards, students will discuss how the rate of an enzyme-controlled reaction will change if there are small or large changes in pH, and then time is taken to ensure that students can explain these changes with reference to tertiary structure bonds and the shape of the active site. Through the use of a quick quiz competition, the students will be reminded of the key term “buffer” and a series of questions are used to challenge their understanding of how these substances could be used in a practical investigation. They will also learn how buffers are found in blood plasma as well as in red blood cells in the form of haemoglobin. As there is a considerable proportion of marks for Maths in a Biology context questions in the A-level assessments, the remainder of the lesson challenges the students to use a given formula to calculate the pH of blood when given the hydrogen ion concentration and to calculate percentage decrease. These questions have been differentiated to give assistance to those that need the support
This lesson describes the effects of pH on enzyme activity. The PowerPoint and accompanying resources are part of the first lesson in a series of 3 lessons which have been designed to cover the content of point 2.1.4 (d)(i)of the OCR A-level Biology A specification.
The lesson begins with a short discussion, where the students are challenged to identify how the stomach and the small intestine differ in terms of a particular condition and to explain why the conditions in these neighbouring digestive organs are so important. This introduces pepsin and trypsin and these protease enzymes play a key role throughout the lesson as they are good examples of how different extracellular enzymes have different optimum pH values (which are not necessarily 7.0). Moving forwards, students will discuss how the rate of an enzyme-controlled reaction will change if there are small or large changes in pH, and then time is taken to ensure that students can explain these changes with reference to tertiary structure bonds and the shape of the active site. Through the use of a quick quiz competition, the students will be reminded of the key term “buffer” and a series of questions are used to challenge their understanding of how these substances could be used in a practical investigation. They will also learn how buffers are found in blood plasma as well as in red blood cells in the form of haemoglobin. With there being such a considerable proportion of marks for Maths in a Biology context questions in the A-level assessments, the remainder of the lesson challenges the students to use a given formula to calculate the pH of blood when given the hydrogen ion concentration and to calculate percentage decrease. These questions have been differentiated to give assistance to those that need the support
Please note that this is a lesson which describes the effect on enzyme activity, as described in 2.1.4 (d)(i), and not the details of the practical investigation which is covered in a later lesson
This lesson focuses on the nature of the genetic code in terms of being near universal, non-overlapping and degenerate and specifically focuses on this latter term to explain how a mutation may not result in a change to the sequence of amino acids. The PowerPoint has been designed to cover point 2.1.3 (f) of the OCR A-level Biology A specification and there are clear links to gene mutations which students will meet in module 6.
The lesson begins by introducing the terms near universal and non-overlapping in addition to degenerate. A quick quiz competition is used to generate the number 20 so that the students can learn that there are 20 proteinogenic amino acids in the genetic code. This leads into a challenge, where they have to use their prior knowledge of DNA to calculate the number of different DNA triplets (64) and the mismatch in number is then discussed and related back to the lesson topic. Moving forwards, base substitutions and base deletions are briefly introduced so that they can see how although one substitution can change the primary structure, another will change the codon but not the encoded amino acid. The lesson concludes with a brief look at the non-overlapping nature of the code so that the impact of a base deletion (or insertion) can be understood when covered in greater detail in module 6.
This lesson explains how negative feedback control maintains systems within narrow limits and uses biological examples to describe the meaning of positive feedback. The PowerPoint and accompanying resources have been designed to cover points 7.11 (i) and (ii) of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification but have been planned to provide important details for upcoming topics such as the importance of homeostasis during exercise and the depolarisation of a neurone.
The normal ranges for blood glucose concentration, blood pH and body temperature are introduced at the start of the lesson to allow students to recognise that these aspects have to be maintained within narrow limits. A series of exam-style questions then challenge their recall of knowledge from topics 1 - 6 as well as earlier in topic 7 to explain why it’s important that each of these aspects is maintained within these limits. The students were introduced to homeostasis at GCSE, so this process is revisited and discussed, so that students are prepared for an upcoming lesson on exercise, as well as for the next part of the lesson on negative feedback control. Students will learn how this form of control reverses the original change and biological examples are used to emphasise the importance of this system for restoring levels to the limits (and the optimum). The remainder of the lesson explains how positive feedback differs from negative feedback as it increases the original change and the role of oxytocin in birth and the movement of sodium ions into a neurone are used to exemplify the action of this control system.
This fully-resourced lesson describes how to calculate the concentration of solution in grams per decimetres cubed and mol per decimetre cubed. The lesson PowerPoint and accompanying questions which are differentiated have been designed to cover points 1.49 & 5.8 of the Edexcel GCSE Chemistry specification.
The lesson begins by introducing students to volumes in decimetres cubed and time is taken to ensure that students are able to convert to this measurement from volumes in centimetres cubed. Moving forwards, students are shown how to calculate the concentration in both units through the use of worked examples and then they are challenged to apply this to a series of exam-style questions which have been differentiated so students of differing abilities can access the work
This lesson explains the properties of typical covalent simple molecular compounds and introduces diamond and graphite as giant substances. The lesson PowerPoint and accompanying resource have been primarily designed to cover point 1.34 of the Edexcel GCSE Chemistry & Combined Science specifications but also links to points 1.35 - 1.37 where the structure and uses of the giant covalent substances are described.
The lesson begins with a quick recap task where students have to recognise a covalent bond from a description and fill the missing part. Moving forwards, they are introduced to the fact that covalent molecules can be simple or giant. They are then presented with a table showing some properties of covalent molecules and having to group them as simple or giant in the short space of time that the table remains displayed on the board. This task challenges their observational skills, something which will again be tested later in the lesson as they study the structure of graphite and diamond. Time is taken to ensure that key details such as the strong covalent bonds in both sets of molecules is understood and that it is the weak intermolecular forces which are actually responsible for the low melting and boiling points. The last part of the lesson introduces diamond and graphite as allotropes of carbon and students will briefly learn why one of these conducts electricity whilst the other doesn’t. If you want a lesson about these allotropes in more detail, then please look for “Diamond and Graphite”. Progress checks have been written into the lesson at regular intervals so that students are constantly assessing their understanding and so misconceptions are quickly identified.
A concise, fast-paced lesson that looks at the orbits of both natural and artifical satellites. The lesson has been written to build on the student’s knowledge of space from KS3 and add key details such as the gravitational pull between the different celestial objects. Students will learn how the speed of the orbiting object and the gravitational pull ensure that the object remains in orbit and consider what would happen should the speed change. Students are briefly introduced to a number of orbits of artificial satellites as well as the uses.
This lesson has been designed for GCSE students
A fast-paced lesson presentation (20 slides) which focuses on the understanding of the scientific term, specific latent heat, and guides students through use of the related equation in energy calculations. This lesson has been written for GCSE students and along with specific heat capacity, these are topics which students regularly say that they do not understand so the aim here has been to embed the key details. The task at the start of the lesson gets students to plot the changing state line for pure water. They have to annotate the line to show the changes in state and then most crucially recognise that when these changes in state occur, there is no change in temperature. Moving forwards, students will meet the additional terms of fusion and vaporisation and then be introduced to the equation. They are reminded that this isn’t an equation that they have to recall, but are expected to apply it and therefore the next few slides focus on the potential difficulties that could be encountered. These include the conversion between units and a mathematical skills check is included at this point so that their ability to move between grams and kilograms and Joules and kiloJoules is tested. Progress checks like this are written into the lesson at regular intervals so the students can constantly assess their understanding.
This fully-resourced lesson covers the meaning of the 9 genetic terms that are detailed in point 2.13 (i) of the Pearson Edexcel A-level Biology (Salters Nuffield) specification as well as four other key terms which will need to be used later in topic 2, 3 and 8.
In the following lessons, students are expected to be able to demonstrate and apply their knowledge and understanding of genetic diagrams and phenotypic ratios to show patterns of inheritance and this is only possible with a clear understanding of the genetic terminology that will be used in related exam questions. As some of these terms were met at GCSE, this lesson has been designed to build on this prior knowledge and provide clear explanations as to their meanings as well as numerous examples of their use in both questions and exemplary answers. The main task provides the students with an opportunity to apply their understanding by recognising a dominance hierarchy in a multiple alleles characteristic and then calculating a phenotypic ratio when given a completed genetic diagram. Other tasks include prior knowledge checks, discussion points to encourage students to consider the implementation of the genetic terms and quiz competitions to introduce new terms, maintain engagement and act as an understanding check.
The 13 terms are genome, gene, chromosome, gene locus, homologous chromosomes, alleles, dominant, recessive, genotype, phenotype, homozygotes and heterozygotes
This lesson focuses on the nature of the genetic code and specifically focuses on the degenerate nature to make a link to gene mutations which is covered later in topic 2. The PowerPoint has been designed to cover point 2.7 of the Pearson Edexcel A-level Biology (Salters Nuffield) specification which states that students should understand how the descriptive terms triplet code, degenerate and non-overlapping relate to the genetic code.
The lesson begins by introducing the terms near universal and non-overlapping in addition to degenerate. A quick quiz competition is used to generate the number 20 so that the students can learn that there are 20 proteinogenic amino acids in the genetic code. This leads into a challenge, where they have to use their prior knowledge of DNA to calculate the number of different DNA triplets (64) and the mismatch in number is then discussed and related back to the lesson topic. Moving forwards, substitutions and deletions are briefly introduced so that they can see how although one substitution can change the primary structure, another will change the codon but not the encoded amino acid. The lesson concludes with a brief look at the non-overlapping nature of the code so that the impact of a base deletion can be understood when covered in greater detail with cystic fibrosis
This concise lesson describes the basic structure of an amino acid and introduces them as the monomers of polypeptides. The engaging PowerPoint has been designed to cover point 2.9 (i) of the Pearson Edexcel A-level Biology A specification and has been specifically written to lead into the next lesson on dipeptides and polypeptides.
The lesson begins with a prior knowledge check, where the students have to use the 1st letters of 4 answers to uncover a key term. This 4-letter key term is gene and the lesson begins with this word because it is important for students to understand that these sequences of bases on DNA determine the specific sequence of amino acids in a polypeptide as detailed in specification point 2.8. Moving forwards, the students are given discussion time to work out that there are 64 different DNA triplets and will learn that these encode for the 20 amino acids that are common to all organisms. The main task of the lesson is an observational one, where students are given time to study the displayed formula of 4 amino acids. They are not allowed to draw anything during this time but will be challenged with 3 multiple choice questions at the end. This task has been designed to allow the students to visualise how the 20 amino acids share common features in an amine and an acid group. A quick quiz round introduces the R group and time is taken to explain how the structure of this side chain is the only structural difference, before cysteine is considered in greater detail due to the presence of sulfur atoms. Students are briefly introduced to disulfide bridges so they will recognise how particular bonds form between the R groups in the tertiary structure which is covered in the next lesson. The lesson concludes with one more quiz round called LINK TO THE FUTURE where the students will see the roles played by amino acids in the later part of the course such as translation and dipeptides.
This fully-resourced lesson describes how triglycerides are formed during condensation reactions and compares saturated and unsaturated lipids. The engaging PowerPoint and accompanying worksheets have been designed to cover the points 1.14 (i) & (ii) of the Pearson Edexcel A-level Biology A specification and links are also made to related future topics such as the importance of the myelin sheath for the conduction of an electrical impulse.
The lesson begins with a focus on the basic structure and roles of lipids, including the elements that are found in this biological molecule and some of the places in living organisms where they are found. Moving forwards, the students are challenged to recall the structure of the carbohydrates from topics 1.12 & 1.13 so that the structure of a triglyceride can be introduced. Students will learn that this macromolecule is formed from one glycerol molecule and three fatty acids and have to use their understanding of condensation reactions to draw the final structure. Time is taken to look at the difference in structure and properties of saturated and unsaturated fatty acids and students will be able to identify one from the other when presented with a molecular formula. The final part of the lesson explores how the various properties of a triglyceride mean that it has numerous roles in organisms including that of an energy store and source and as an insulator of heat and electricity.
This fully-resourced lesson describes the relationship between the molecular structure of a triglyceride and its functions in living organisms. The engaging PowerPoint and accompanying worksheets have been designed to cover specification point 2.2 (f) of the CIE International A-level Biology course and links are also made to related future topics such as the importance of the myelin sheath for the conduction of an electrical impulse and the use of lipids as a respiratory substrate.
The lesson begins with a focus on the basic structure and roles of lipids, including the elements that are found in this biological molecule and some of the places in living organisms where they are found. Moving forwards, the students are challenged to recall the structure of the carbohydrates from earlier in topic 2 so that the structure of a triglyceride can be introduced. Students will learn that this macromolecule is formed from one glycerol molecule and three fatty acids and have to use their understanding of condensation reactions to draw the final structure. Time is taken to look at the difference in structure and properties of saturated and unsaturated fatty acids and students will be able to identify one from the other when presented with a molecular formula. The final part of the lesson explores how the various properties of a triglyceride mean that it has numerous roles in organisms including that of an energy store and source and as an insulator of heat and electricity.
Simple and facilitated diffusion are forms of passive transport and this lesson describes the factors that increase the rate of this movement across membranes. This fully-resourced lesson is the first in a series of two that have been designed to cover specification point 2.4 of the Pearson Edexcel A-level Biology A and the involvement of channel and carrier proteins is also described and discussed.
In a number of previous lessons that covered specification points 2.1 and 2.2, students were provided with the details of gas exchange surfaces and the structure and properties of cell membranes. This lesson continually refers back to the content of these lessons so that links can be made between the movement across a cell membrane with the concentration gradient, the parts of the membrane involved and any features that may increase the rate at which the molecules move. A series of questions about the alveoli is used to demonstrate how a large surface area, a short diffusion distance and the maintenance of a steep concentration gradient will increase the rate of simple diffusion. One of two quick quiz rounds is then used to introduce temperature and size of molecule as two further factors that can affect simple diffusion. The remainder of the lesson focuses on facilitated diffusion and describes how transmembrane proteins are needed to move small, polar or large molecules from a high concentration to a lower concentration across a partially permeable membrane.
The other lesson included in this series to cover specification point 2.4 describes active transport, endocytosis and exocytosis.
This engaging lesson describes how chromosome mutations result in changes to the number or structure of chromosomes and focuses on Downs and Turner’s syndrome. The PowerPoint and accompanying resources have been designed to cover specification points 2.3 (vi) and (vii) as detailed in the Edexcel A-level Biology B specification.
A human karyotype which has not been altered by a mutation is studied at the start of the lesson to allow students to recall the usual number of chromosomes as well as the sex chromosomes. They are then challenged to identify the differences when presented with the karyotypes of sufferers of Downs, Turner’s and Klinefelter’s syndrome. Students will learn that in the majority of cases, these conditions are the result of non-disjunction and having been assisted in the explanation of the outcome for Downs and Klinefelters, they have to form their own for Turner’s. The remainder of the lesson looks at other types of mutations, including translocation, and students will also see how whole sets of chromosomes can be duplicated in polyploidy.
This revision resource contains a concise yet informative PowerPoint (25 slides) and a worksheet that will enable the students to assess their understanding of the topic B4 (Enzymes) content of the CIE IGCSE Combined Science specification for examination in June and November 2020 and 2021. The range of exam questions (with explained answers), quick tasks and quiz competitions have been designed to cover as much content as possible but the following topics have received particular attention:
Enzymes as biological catalysts that speed up reactions
The binding of a substrate with the active site of an enzyme
The effect of a changing pH on the activity of an enzyme
The effect of a changing temperature on the activity of an enzyme
Denaturation
This concise, engaging revision lesson has been designed to include activities that will motivate the students whilst they assess their understanding of topic B3 (Biological molecules) of the CIE IGCSE Combined Science specification. An understanding of biological molecules is fundamental to the understanding of a lot other Biology topics and this lesson has attempted to make the links between the different areas.
The range of activities which include exam questions, quick tasks and quiz competitions have been written to cover as much of the content as possible but the following topics have received particular attention:
The chemical elements in carbohydrates
The formation of starch and glycogen from glucose
The iodine test for starch
Lipids are formed of fatty acids and glycerol
Investigational skills
The ethanol emulsion test for lipids
This resource includes a PowerPoint (27 slides) and a worksheet with a task about the digestion of milk fat so students can recognise the components of lipids
