A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A quick and fun lesson which goes through the accurate addition of state symbols to balanced symbol equations. The aim of this lesson is to give students quick and easy ways to recognise the state of matter of a reactant or product whilst being engaged trough the format of the lesson.
A number of quick quiz competitions are used in the lesson, either to introduce a new term of to act as a fun understanding check. First of all, students will use their Chemistry knowledge to come up with the fourth symbol, aq, which is commonly forgotten. Moving forwards, a worked example is used to guide the students through adding the state symbols. A visual of the experiment is shown in a video but could be done as a demonstration to help the students further. Finally, the students are challenged to apply their new-found knowledge and write a fully balanced symbol equation with state symbols. An assistance sheet is available for those who need a little push.
This lesson has been designed for GCSE students
An engaging lesson presentation (39 slides) with associated differentiated worksheets that looks at they key differences between pure and impure substances and briefly explores how a mixture like an alloy can still be very useful.
The lesson begins by challenging the students to recognise 4 diagrams of pure substances from a selection of 5. This will lead students to the definition of pure (in Science) which is likely to be different to what they have encountered in everyday language. The next task gets the students to draw a graph showing the melting and boiling points of pure water. This will enable them to compare the melting point against that of an impure substance and therefore recognise that this difference can be used as point to decide on purity. An example of gritting is used to explain how this change in melting point can be utilised and then the students are challenged to apply this new-found knowledge to the situation of adding salt to boiling water when making pasta. The remainder of the lesson focuses on some famous mixtures. Beginning with air, students will be able to visualise how this mixture is made of a number of gases, each with different boiling points which allows them to be separated by fractional distillation. Alloys are briefly explored so that students know why these mixtures are used for certain functions over pure metals and the summary passage for this task has been differentiated two ways so that all can access the work. Progress checks have been written into the lesson at regular intervals so that students can check their understanding and a range of quick quiz competitions are used to maintain engagement whilst introducing new terms in a fun manner.
If you want to look into alloys in greater detail, then this lesson could be combined with the one named “alloys” which is also uploaded.
A fully-resourced lesson which explores how the composition of different alloys is related to their properties and their uses. The lesson includes an engaging and informative lesson presentation (38 slides) and an associated differentiated worksheet.
The lesson begins by challenging the students to use their Chemistry knowledge of numbers to come up with the letters of the word alloy. Students are introduced to the definition of this key term and then use a wordsearch to find both the names of the alloys but also the metals that are found in these mixtures. The main aim of this lesson is to get students to understand why alloys are chosen for jobs rather than pure metals and there is a focus on atoms and their arrangement. Students are challenged to use the example of copper and brass to complete a summary passage which is differentiated so that those who need more assistance are still able to access the work. The remainder of the lesson focuses on steel and solder, again exploring how their different features are related to how they are used in modern day life. Progress checks have been written into the lesson at regular intervals to allow the students to check their understanding and a range of quick quiz competitions will aid engagement.
This lesson has been designed for GCSE students but could be used with KS3 students who are looking at mixtures within the atoms and elements topic.
A concise lesson presentation (22 slides) that looks at how catalysts affect the rate of a chemical reaction and focuses on the Science behind this topic. The lesson begins with the introduction of the key term and its definition to ensure that students are confident in the use of a catalyst in the correct context. More key terms like “activation energy” are introduced and links made to related Chemistry topics such as endothermic and exothermic reactions. Students are challenged to show how the activation energy will differ in the presence of a catalyst. The rest of the lesson involves a practical and the collection of results so that students can compare their data against the theory which was introduced earlier in the lesson.
This lesson has been designed for GCSE students.
A fully-resourced lesson which looks at the meaning of the rate of reaction and guides students through calculating both the mean and instantaneous rate of reaction. The lesson includes a concise lesson presentation (19 slides) and a question worksheet which is differentiated two ways.
The lesson begins by challenging the students to suggest the missing factor in the rate of reaction equation so they can learn that either the mass of a reactant or a mass of a product could be used. Links are made to practical skills as students will understand that if a product is in the gaseous form, the volume produced within a set time will enable the rate to be calculated. Worked examples are used to show the students how to calculate the mean rate of reaction and then the instantaneous using a tangent. The rest of the lesson involves collecting data from an experiment to calculate the rate of reaction. The questions associated with the practical have been differentiated so students who need assistance can still access the learning.
This lesson has been written for GCSE students
An engaging lesson presentation (31 slides) and associated worksheet that looks at animal and plant cells as eukaryotic cells. The lesson focuses on the organelles which are found inside these two cells and ensures that students understand the difference between the cells as well as briefly looking at the difference to prokaryotic cells at the end of the lesson. There is a lot of key terminology involved in this topic, so a range of tasks including fun quiz competitions are used to introduce these terms in an engaging manner. The lesson is student based, with the emphasis on them to identify the functions of the different organelles as well as recognising which ones are found in both cells or just plant cells. Discussions are encouraged during the lesson with leading questions, such as questioning whether a red blood cell isn’t actually an eukaryotic cell because of the lack of nucleus. Progress checks have been written into the lesson at regular intervals during the lesson so that students can assess their understanding.
This lesson has been written for GCSE students but could be used with KS3 students who are looking to extend their knowledge beyond the basics that they will be taught at this level.
An informative lesson presentation (20 slides) and associated worksheet that looks at how negative feedback loops act as a final control in homeostatic mechanisms. This is a topic which is poorly understood by students at both GCSE and even A-level, so whilst designing this lesson, the focus was on a few key points and applying it to a range of actual examples. Students will see how a negative feedback loop is used in the control of adrenaline release and temperature regulation and they will also be shown what would happen if this loop didn’t exist. Students are then challenged to apply their knowledge by putting the order of the regulation of metabolic rate into the correct order. The final part of the lesson briefly looks at how positive feedback loops also exist by using the example of the release of oxytocin during birth.
This lesson has primarily been designed for GCSE students but is suitable for A-level Biology students too.
An informative lesson presentation (37 slides) and associated question worksheet which looks at the key properties of alpha, beta and gamma radiation. Students are given key pieces of information during the lesson and are then challenged to use their knowledge of related topics such as atomic structure and waves to complete the information table about the types of radiation. By the end of the lesson, students will be able to compare the types of radiation on form, charge, relative mass, penetrating power and equation symbols. Progress checks have been written into the lesson at regular intervals so that students can constantly assess their understanding.
This lesson has been written for GCSE students (14 - 16 year olds in the UK).
A concise lesson presentation (22 slides) and question worksheet, which together focus on the challenge of applying the equations of motion to calculation questions. Students are given this equation on the data sheet in the exam - therefore, this lesson shows them how they will be expected to rearrange in it four ways. For this reason, the start of the lesson revisits the skills involved in rearranging the formula, beginning with simple tasks and building up to those that involve indices as are found in this equation. Once students have practised these skills, they are challenged to answer 4 questions, although 1 is done together with the class to visualise how to set out the working.
This lesson has been designed for GCSE students
An engaging and detailed lesson presentation (31 slides) that looks at how nitrogen is cycled and focuses on the different bacteria who play key roles in this cycle. The lesson begins by exploring why nitrogen is so critical for living organisms for the synthesis of DNA and proteins. Students are introduced to nitrogen-fixing bacteria to start and challenged to use their knowledge of interdependence to state the type of ecological relationship that is formed between them and the leguminous plant that they live on. Each stage of the cycle is complimented by a diagram highlighting that part so students are able to visualise how the cycle comes together. Time is taken to ensure that students recognise that any non-leguminous plants can only absorb nitrogen when it is nitrates form from the soil. Moving forwards, students will meet decomposers and nitrifying bacteria and again be shown where their function fits into the cycle. As the final part of the learning, students are challenged to consider what else is needed in order for this to be a cycle and will meet the denitrifying bacteria as a result. Progress checks, in a range of forms, have been written into this lesson at regular intervals so that students can assess their understanding and any misconceptions can be immediately addressed.
This lesson has been written for GCSE students, but could be used with A-level students who want to have a recap before extending their knowledge further.
A detailed lesson presentation and associated question worksheet which uses a step by step guide and numerous worked examples to show students how to draw genetic crosses to calculate offspring percentages. Before students are able to draw genetic diagrams, they need to understand and be able to use genetic terminology so this is the focus for the start of the lesson. Time is taken to go over the meaning of dominant and recessive alleles, genotypes and phenotypes. Moving forwards, students will be challenged to link genotypes to phenotypes for both dominant and recessive disorders and common misconceptions such as carriers in recessive disorders are explained. Finally, a 5 step guide is used to walk students through drawing genetic diagrams. Students are then given a chance to apply their new-found knowledge to questions about the inheritance of cystic fibrosis and polydactyly. Progress checks have been written into the lesson at regular intervals so that students can assess their understanding.
This lesson has been designed for GCSE students but is perfectly suitable for A-level students who are studying the topic of monogenic inheritance
An informative lesson presentation (38 slides) that looks at a range of non-communicable diseases and also explores how risk factors can increase the chances of an individual having one of these diseases. The lesson begins by looking at CHD so that students can recognise that this is a non-communicable disease and check on their understanding of this key term. Moving forwards, a step by step question and answer format is used to show students how to form a long answer. Key terminology such as thrombosis and atherosclerosis are introduced using quick quiz competitions which act to maintain the engagement. The rest of the lesson focuses on a range of risk factors for cardiovascular diseases and time is taken to deepen knowledge of the human anatomy by challenging students to link the names of arteries to the organs that they supply. Progress checks have been written into the lesson at regular intervals so that students can constantly assess their understanding and any misconceptions can be addressed.
This lesson has been written for GCSE students (14 - 16 year olds in the UK)
A fully-resourced lesson that looks at the reaction of an acid with a metal or a metal carbonate and guides students through writing word and symbol equations to represent these reactions. This lesson includes a lesson presentation (39 slides) and differentiated worksheets.
The lesson begins by challenging the students to spot a pattern when naming the salts that are produced from these reactions. Students are shown how the second word of the salt’s name depends upon the particular acid involved in the reaction and are given opportunities to watch this in worked examples before applying their knowledge to a question. Students will also meet the general formula for the reaction of an acid with a metal carbonate. Moving forwards, a step by step guide is used to show the students how to write fully balanced symbol equations. Time is taken to specifically show them how to write accurate chemical formulae, including those which involve a bracket as is common in this topic. The final task challenges the students to bring all of this information together to write word and symbol equations for three reactions. This worksheet is differentiated two ways so students who require some assistance can still access the work.
This lesson has been written for GCSE students (14 - 16 year olds in the UK)
An engaging and informative lesson presentation (40 slides) that looks at the different steps that have to be taken when trying to identify potential donors for organ transplants. Links are made throughout the lesson to related topics such as the human defence systems and blood groups. The lesson begins by challenging the students to use their knowledge of the body’s defences to explain why closely matching tissues is critical when choosing a donor. Moving forwards, students will see how the four blood groups in the ABO system need to receive certain bloods and can only be given to certain others. There is a brief discussion of the HLA antigens and why this needs to be matched. The remainder of the lesson focuses on immuno-suppressant drugs and the advantages and disadvantages to individuals of taking these drugs. Progress checks have been written into the lesson at regular intervals to allow the students to constantly assess their understanding and any misconceptions to be addressed.
This lesson has been written for GCSE students
A fully-resourced lesson which looks at how auxins are involved in the response to the stimuli and gravity. The lesson includes an engaging lesson presentation (29 slides) and associated worksheets which have been differentiated. The lesson begins by challenging students to consider the different stimuli that a plant will respond to. There is focus throughout the lesson on the use of key terminology and students will start immediately by meeting the different types of tropisms. A quick competition is used to introduce the students to auxins and the key details of these chemicals are discussed. They will see how they are produced in the tips of shoots and roots and cause cell elongation in the shoots. A summary task is used to get the students to explain how a plant grow towards a light source. The next task challenges the students to apply their knowledge as a range of experimental data is shown to them and they have to predict how the plant would respond and explain - this task has been differentiated two ways so those students who need extra assistance can access the learning. The final part of the lesson looks at gravitropism and all of the learning is brought together to explain how the shoots grow away and the roots towards.
This lesson has been written for GCSE students.
An engaging lesson presentation (34), accompanied by a summary worksheet, which together explore the factors which change the rate of transpiration and focuses on the explanation behind each factor. The lesson begins by introducing the term, transpiration, and linking this to the structure of a leaf to ensure that students know that water is lost as water vapour out of the stomata. Students are provided with an analogy of plants being like clothes on a washing line to challenge them to come up with some of the factors involved. Time is taken to look specifically at humidity as this is a factor which is commonly misunderstood. Moving forwards, students are challenged to draw sketch graphs to predict whether increasing each of these factors will increase the rate of transpiration or decrease it. A series of questions to lead to answers is used to show the students how to explain the effect of increasing the light intensity. The remainder of the lesson looks at a potometer and how it can be used to calculate the rate. The mathematical skills of the students are challenged during a range of tasks and then linked back to the Science so they can recognise which features of plants will help to reduce water loss. Progress checks are written into this lesson at regular intervals to allow students to assess their understanding and a number of quick competitions act to maintain engagement.
This lesson has been written for GCSE students but is suitable for A-level students who are studying the plants topic
An informative lesson which guides students through the commonly misunderstood topic of drawing free body diagrams and using them to calculate resultant forces. The lesson begins by ensuring that students understand that force is a vector quantity and therefore arrows in diagrams can be used to show the magnitude and direction. Drawing free body diagrams is poorly understood and therefore time is taken to go through the three key steps in drawing these diagrams. Each of these steps is demonstrated in a number of examples, so students are able to visualise how to construct the diagrams before they are given the opportunity to apply their new-found knowledge. The rest of the lesson focuses on calculating resultant forces when the forces act in the same plane and also when they are at angles to each other. Again, worked examples are shown before students are challenged to apply. Progress checks are written into the lesson at regular intervals so that students can constantly assess their understanding and any misconceptions can be addressed.
This lesson has been designed for GCSE students
A fully-resourced lesson which includes a concise lesson presentation (16 slides) and accompanying worksheet that guides students through the use of the gravitational potential energy equation to calculate energy, mass and height. The lesson begins by challenging students to work out the factors involved in calculating gravitational potential energy having been given a scenario with some balls on shelves. The students will discover that mass and height affect the energy size and that a third factor, gravity constant, is involved. The rest of the lesson focuses on using the equation to calculate energy, mass and height. In terms of the latter, students have to carry out an engaging task to work out the height that three flags have to be hoisted to during a medal ceremony.
This lesson has been written for GCSE students.
A fully-resourced lesson which focuses on using the kinetic energy equation to calculate energy, mass and speed. The lesson includes a lesson presentation (23 slides) which guides students through the range of calculations and accompanying worksheets which are differentiated. The lesson begins with the students being drip fed the equation so they are clear on the different factors involved. They are challenged to predict whether increasing the mass or increasing the speed will have a greater effect on the kinetic energy before testing their mathematical skills to get results to support their prediction. Moving forwards, students are shown how to rearrange the equation to make the mass the subject of the formula so they can use their skills when asked to calculate the speed. The final task of the lesson brings all of the learning together to tackle a set of questions of increasing difficulty. These questions have been differentiated so that students who need extra assistance can still access the learning.
This lesson has been written for GCSE students
This lesson has been designed to explore the range of energy sources which are used on Earth and specifically looks at why an increase in the use of renewable sources is critical for the future. The student’s scientific understanding is challenged at each step of the lesson but there is also a mathematical element running throughout. The lesson begins by challenging the students to predict which energy sources contributed the greatest % when presented with a pie chart. Students cover this topic in other subjects like Geography, so the lesson aims to build on this and consolidate the essential understanding. A range of renewable sources are discussed and key terms such as carbon-neutral taken on further.
This lesson has been designed for GCSE students but parts could be used with younger students who are looking at