An engaging lesson presentation (58 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit B1 of the AQA GCSE Biology specification. The topics that are tested within the lesson include: Eukaryotes and prokaryotes Animal and plant cells Microscopy Chromosomes Diffusion Osmosis Active transport Students will be engaged through the numerous activities including quiz rounds like "A QUESTION of CELLS" and "Take the Hotseat" whilst crucially being able to recognise those areas which need further attention

An engaging lesson presentation (47 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within the Chemistry unit C6 (The rate and extent of chemical change) of the AQA GCSE Combined Science specification (specification point C5.6) The topics that are tested within the lesson include: Calculating rates of reactions Factors that affect the rate of a reaction Collision theory Reversible reactions Equilibrium Changing the equilibrium position Students will be engaged through the numerous activities including quiz rounds like “Don’t get iRATE” and “Under PRESSURE” whilst crucially being able to recognise those areas which need further attention

This revision resource has been designed with the simple aim of motivating the students whilst they assess their understanding of the content found in module 4.2.2 (Classification and evolution) of the OCR A-level Biology A specification. This module is often brushed over by students which leads to misconceptions and therefore time has been taken to explain the important concepts so that key points are recalled and retained. The resource includes a detailed and engaging Powerpoint (85 slides) and associated worksheets, some of which are differentiated to allow students of differing abilities to access the work. The range of activities have been designed to cover as much of the content as possible but the following sub-topics have been given particular attention: The biological classification of a species Classification hierarchy The three-domain and five-kingdom classification The features of the five kingdoms Phylogenetic trees Anatomical, physiological and behavioural adaptations Calculating the standard deviation Continuous and discontinuous variation In addition to these topics, some topics from other modules such as cell division and prokaryotic cells are tested in order to challenge the students on their ability to make links between the modules. The range of activities include exam questions and understanding checks as well as quiz competitions to maintain student engagement.

This lesson describes how to use the Spearman’s rank correlation coefficient to consider the relationship between two sets of data. The PowerPoint and accompanying exam-style question are part of the final lesson in a series of 3 which have been designed to cover point 4.2.2 (f) of the OCR A-level Biology A specification. The previous two lessons described the different types of variation and explained how to calculate the standard deviation and how to use the Student’s t-test to compare two means. As with the previous lesson, a step by step guide is used to walk the students through the use of the formula to generate the rank coefficient and to determine whether there is a positive correlation, no correlation or a negative correlation. The students are also reminded of the null hypothesis and will be shown how to accept or reject this hypothesis and to determine significance. The students will work through an example with the class and then are given the opportunity to apply their newly-acquired knowledge to an exam-style question. The mark scheme is displayed on the PowerPoint so they can assess their understanding

A fully-resourced lesson which guides students through the method involved in calculating the empirical formula and includes a concise, clear lesson presentation (21 slides) and practice questions. Students are given a template to use as they are introduced to the questions and then encouraged to work without it as the lesson progresses. The students are shown how empirical formula questions can be made more difficult and hints are given so that students are able to tackle them and access all of the marks available. This lesson has been designed for GCSE students (14 - 16 year olds in the UK)

A resourced lesson which looks at a range of methods that are used to increase biodiversity. The lesson includes an engaging lesson presentation (31 slides) and an associated worksheet The lesson begins by getting students to recall the term biodiversity and time is taken to ensure that the meaning of this word is fully understood. The lesson takes the form of a bus ride around London, looking at some of the attractions which act to increase or maintain biodiversity. Students will “virtually” visit both London Zoo and Kew Gardens and will learn how methods such as the captive breeding programme and the Millenium Seed Bank are used to influence biodiversity. Along with the bus ride, students will compete in a number of quiz competitions which act to maintain engagement whilst introducing key terms or facts. There are regular progress checks throughout the lesson to allow the students to check their understanding. This lesson has been designed for GCSE students.

An engaging lesson presentation (33 slides) which walks students through the main steps in the extraction of iron from its ore. The lesson begins by challenging the students to recall the reactivity series of metals and specifically the position of iron in relation to carbon so they recognise that it can be extracted by reduction with carbon. Key skills from other Chemistry topics are tested during the lesson such as writing chemical formulae and redox reactions. The rest of the lesson involves a step-by-step guide where students are given a passage and a symbol equation with something missing which they have to complete. This task ensures that students recognise the products, formulae and state symbols at each stage. A number of quiz competitions are used during the lesson to maintain engagement and progress checks have been written into the lesson at regular intervals so that students can assess their understanding. This lesson has been written for GCSE students and fits in nicely with other resources that are uploaded (extracting metals and extracting aluminium).

A fully-resourced lesson, which has been designed for GCSE students, and includes an engaging and informative lesson presentation (37 slides) and differentiated worksheets. This lesson explores the type of cell division known as meiosis and focuses on the use of key terminology so that students can apply their knowledge to any organism that carries out this division, and not just humans. For this reason, time is taken at the start of the lesson to go over the meaning of the terms, diploid and haploid. Students are also taught how to think about the quantity of DNA inside a cell in terms of n, so that they can see and understand how this quantity changes through the cell cycle. They are encouraged to fill in a table at each stage of the cycle to show the quantity of DNA. In this way, students will understand how a diploid parent cell goes through interphase and as a result of DNA replication, the quantity of DNA is 4n as the first meiosis division is about to start. Although this could be viewed as high end knowledge, the format of this lesson should allow all abilities to understand and therefore have more chance of being successful with meiosis questions. Students are encouraged to think for themselves to work out how many daughter cells will result at the end of two divisions and to consider the quantity of DNA found inside those cells. At this stage of the lesson, students have to summarise all they have learnt into two key points (as shown on the cover image). The remainder of the lesson gives them the opportunity to apply their knowledge with a range of questions and it is not until right at the end that they are allowed to finally relate this cell division to humans. Although this lesson has been primarily designed for GCSE students (14 - 16 year olds in the UK), it is highly suitable for A-level lessons, especially if a teacher wants to recap on this cell division before extending knowledge.

A fully-resourced lesson which has been designed for GCSE students and includes an engaging lesson presentation and associated worksheets. This lesson looks at the three limiting factors of photosynthesis, focusing on the graphs that they produce and ensures that students can explain why temperature is a factor. This lesson begins by introducing the students to the definition of a limiting factor. They are challenged to recognise that it would be photosynthesis which is limited by carbon dioxide concentration and light intensity. The third factor, temperature, is not introduced until later in the lesson so that students are given thinking time to consider what it might be. Having been presented with two sets of data, students are asked to draw sketch graphs to represent the trend. The limiting factors on the light intensity graph are taught to the students so they can use this when working out the limiting factors on the carbon dioxide graph. The remainder of the lesson focuses on temperature and more specifically why a change in this factor would cause a change in the rate of photosynthesis because of enzymes. The student’s knowledge of that topic is tested alongside. Progress checks have been written into the lesson at regular intervals so that students can constantly assess their understanding.

A fully-resourced lesson that uses a range of tasks, understanding checks and quick competitions to guide students through calculating the relative formula mass for substances with a range of chemical formulae. The relative formula mass is required in a lot of calculations, such as those that involve moles, so it is an important skill to get right. Worked examples are used throughout the lesson to visualise the metho for the students. Initially, students will learn how to calculate the mass from simple formulae before helpful hints are provided for harder formulae such as those that contain a bracket. Students are given the chance to apply their knowledge by proving that mass is conserved in a reaction. This lesson has been written for GCSE students but could be used with higher ability KS3 students in lessons that are looking to push knowledge forward

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 8 (Fuels and Earth Science) of the Edexcel GCSE Chemistry specification. The specification points that are covered in this revision lesson include: Recall that hydrocarbons are compounds that contain carbon and hydrogen only Describe and explain the separation of crude oil into simpler, more useful mixtures by the process of fractional distillation Recall the names and uses of the fractions Explain how hydrocarbons in different fractions differ from each other Describe the complete combustion of hydrocarbon fuels as a reaction Explain why the incomplete combustion of hydrocarbons can produce carbon and carbon monoxide Explain how carbon monoxide behaves as a toxic gas Explain how impurities in some hydrocarbon fuels result in the production of sulfur dioxide Explain some problems associated with acid rain caused when sulfur dioxide dissolves in rain water Explain why, when fuels are burned in engines, oxygen and nitrogen can react together at high temperatures to produce oxides of nitrogen, which are pollutants Evaluate the advantages and disadvantages of using hydrogen, rather than petrol, as a fuel in cars Explain how cracking involves the breaking down of larger, saturated hydrocarbon molecules (alkanes) into smaller, more useful ones, some of which are unsaturated (alkenes) The students will thoroughly enjoy the range of activities, which includes a quiz competition called “POLLUTE THE AIR…WITH THE ANSWER” where they have to compete to be the 1st to recognise a pollutant gas from a series of clues whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

An engaging lesson presentation (67 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within TOPIC 7 (Organic chemistry) of the AQA GCSE Chemistry specification (specification point C4.7) The topics that are tested within the lesson include: Crude oil, hydrocarbons and alkanes Fractional distillation and petrochemicals Properties of hydrocarbons Cracking and alkenes Alkenes Alcohols Carboxcylic acids Addition polymerisation Condensation polymerisation Students will be engaged through the numerous activities including quiz rounds like “What FRACTION of this is correct” and “Are you on FORM” whilst crucially being able to recognise those areas which need further attention

This is a detailed and engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Waves) of the Pearson Edexcel IGCSE Physics 9-1 specification (4PH1) for first assessment in June 2019. The specification points that are covered in this revision lesson include: Use the following units: degree (°), hertz (Hz), metre (m), metre/second (m/s) and second (s) Explain the difference between longitudinal and transverse waves Know the definitions of amplitude, frequency, wavelength and period of a wave Know and use the relationship between the speed, frequency and wavelength of a wave Use the relationship between frequency and time period Explain that all waves can be reflected and refracted Know that light is part of a continuous electromagnetic spectrum that includes radio, microwave, infrared, visible, ultraviolet, x-ray and gamma ray radiations and that all these waves travel at the same speed in free space Know the order of the electromagnetic spectrum in terms of decreasing wavelength and increasing frequency, including the colours of the visible spectrum Explain some of the uses of electromagnetic radiations Draw ray diagrams to illustrate refraction Know and use the relationship between refractive index, angle of incidence and angle of refraction Describe the role of total internal reflection in transmitting information along optical fibres and in prisms Explain the meaning of critical angle c Know and use the relationship between critical angle and refractive index Know that sound waves are longitudinal waves which can be reflected and refracted Know that the frequency range for human hearing is 20–20 000 Hz Understand how the loudness of a sound relates to the amplitude of vibration of the source The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to decide whether a passage about a sub-topic of waves is completely correct whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual International GCSE exams

This lesson uses the example of the genetic engineering of bacteria to produce insulin to walk students through the steps involved in this process. It has been written for GCSE students and therefore includes the detail required at this level, such as the involvement of restriction enzymes and the sticky ends that their cut produces. The lesson begins by challenging students to recognise that insulin is being described by a series of clues. Some further details of this hormone are recalled to test their previous knowledge of the endocrine system and also to lead into the genetic engineering of bacteria to make this protein. Moving forwards, time is taken to go through the details of plasmids and how they act as vectors as well as the enzymes, restriction and ligase. The main task of the lesson uses a series of descriptions to go through the steps involved in the process. Words or phrases are missing from each description so students have to use the terms they’ve encountered in this lesson as well as their prior knowledge to complete the step. Discussion-provoking questions are added to encourage the students to consider why certain parts of the process occur. The lesson concludes by the consideration of other organisms which have been genetically engineered as well as some of the risks of the process, which students are asked to complete for homework. As detailed above, this lesson has been designed for GCSE students but could be used with students taking A-level Biology, who are struggling to understand the detail found at this level and need to revisit the foundations.

The AQA specification states that a minimum of 10% of the marks across the 3 assessment papers will require the use of mathematical skills. This revision lesson has been designed to include a wide range of activities that challenge the students on these exact skills because success in the maths in biology questions can prove the difference between one grade and the next! Step-by-step guides are used to walk students through the application of a number of the formulae and then exam-style questions with clear mark schemes (which are included in the PowerPoint) will allow them to assess their progress. Other activities include differentiated tasks, group discussions and quick quiz competitions such as “FROM NUMBERS 2 LETTERS” and “YOU DO THE MATH”. The lesson has been written to cover as much of the mathematical requirements section of the specification as possible but the following have been given particular attention: Hardy-Weinberg equation Chi-squared test Calculating size Converting between quantitative units Standard deviation Estimating populations of sessile and motile species Percentages and percentage change Cardiac output Geometry Due to the detail and extensiveness of this lesson, it is estimated that it will take in excess of 2/3 hours of A-level teaching time to work through the activities and it can be used throughout the duration of the course

This revision resource has been written to include a range of activities that motivate the students whilst they assess their understanding of the content found in module 2.1.5 (Biological membranes) of the OCR A-level Biology A specification. The resource includes a detailed and engaging Powerpoint (71 slides) and associated worksheets The range of activities have been designed to cover as much of the content as possible but the following sub-topics have been given particular attention: The movement of molecules by active transport which requires ATP as an immediate source of energy The movement of molecules by passive processes The use of membrane-spanning proteins in facilitated diffusion and active transport Factors that increase the rate of simple diffusion The movement of water across membranes by osmosis The effects that solutions of different water potentials can have on animal and plant cells The fluid mosaic model of membrane structure The roles of the components of the plasma cell membrane In addition to these topics, some topics from other modules such as organelles, synapses and autoimmune diseases are tested in order to challenge the students on their ability to make links between the modules. The range of activities include exam questions and understanding checks as well as quiz competitions to maintain student engagement.

This revision resource contains an engaging and detailed PowerPoint (66 slides) and associated worksheets, all of which are differentiated to allow students of different abilities to access the work. The range of activities that include exam questions with explained answers and quiz competitions covers the content within topic 11 (Air and water) of the CIE IGCSE Chemistry specification for examination in June and November 2020 and 2021. The resource was written to cover as much of the content as possible but the following topics have received particular attention: The fractional distillation of air to separate oxygen and nitrogen The composition of clean air The variety of reactions that form carbon dioxide The changes in the atmospheric levels of carbon dioxide and the link to global warming The common pollutants and their effects on health and buildings The treatment of water to make it safe The chemical tests for water The conditions needed for the Haber Process Efforts have been made during the design of this lesson to make connections between topic 11 and the other topics in order to show students how important it is to make Biological links. In addition, there is a big emphasis on mathematical skills and guidance is given throughout to break down any barriers that students may have with these types of questions.

An engaging lesson presentation (77 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within TOPIC 2 (Bonding, structure and properties of matter) of the AQA GCSE Chemistry specification (specification point C4.2) The topics that are tested within the lesson include: Chemical bonds Ionic bonding Ionic compounds Properties of ionic compounds Covalent bonding Metallic bonding Properties of metals and alloys The three states of matter State symbols Structure and bonding of carbon Size of particles and their properties Students will be engaged through the numerous activities including quiz rounds like “The name’s BOND…” whilst crucially being able to recognise those areas which need further attention

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Module 5.1.3 (Neuronal communication) of the OCR A-level Biology A specification. The sub-topics and specification points that are tested within the lesson include: The structure and function of sensory, motor and relay neurones The generation and transmission of nerve impulses in mammals The structure and roles of synapses in neurotransmission Students will be engaged through the numerous quiz rounds such as “Communicate the word” and “Only CONNECT” whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual A-level terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick differentiated tasks and quiz competitions to enable students to assess their understanding of the content found within Topic 5 (On the wild side) of the Pearson Edexcel A-level Biology A specification. The sub-topics and specification points that are tested within the lesson include: Be able to describe how to carry out a study on the ecology of a habitat Understand the stages of succession Understand the overall reaction of photosynthesis Understand the structure of chloroplasts in relation to their role in photosynthesis Understand the relationship between NPP, GPP and respiration Understand the effect of temperature on enzyme activity and its impact on plants and animals and microorganisms Know how the temperature coefficient Q10 quantifies the rate of an enzyme-catalysed reaction Understand how knowledge of the carbon cycle can be applied to methods to reduce atmopsheric levels of carbon dioxide A number of the tasks have been differentiated to allow all abilities of student to access the work and there is a big emphasis on the mathematical skills that can be tested in this topic. Students will be engaged through the numerous quiz rounds such as “Can you DEPEND on your knowledge” and “From NUMBERS 2 LETTERS” whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual A-level terminal exams