An informative lesson which guides students through the commonly misunderstood topic of drawing free body diagrams and using them to calculate resultant forces. The lesson begins by ensuring that students understand that force is a vector quantity and therefore arrows in diagrams can be used to show the magnitude and direction. Drawing free body diagrams is poorly understood and therefore time is taken to go through the three key steps in drawing these diagrams. Each of these steps is demonstrated in a number of examples, so students are able to visualise how to construct the diagrams before they are given the opportunity to apply their new-found knowledge. The rest of the lesson focuses on calculating resultant forces when the forces act in the same plane and also when they are at angles to each other. Again, worked examples are shown before students are challenged to apply. Progress checks are written into the lesson at regular intervals so that students can constantly assess their understanding and any misconceptions can be addressed. This lesson has been designed for GCSE students

This engaging lesson presentation (57 slides) and associated worksheets uses exam questions with displayed mark schemes, quick tasks and quiz competitions to enable students to assess their understanding of the topics found within module B6 of the OCR Gateway A GCSE Biology specification. The topics which are specifically tested within the lesson include: Genetic engineering, Health and disease, Spread of communicable diseases and preventing the spread, Non-communicable diseases, Treating CVD, Monoclonal antibodies and Modern advances in medicine Students will enjoy the competitions such as "Is this ENGINEERED correctly" and "From NUMBERS 2 LETTERS" whilst crucially being able to recognise those areas which need their further attention

An informative lesson presentation (38 slides) that looks at a range of non-communicable diseases and also explores how risk factors can increase the chances of an individual having one of these diseases. The lesson begins by looking at CHD so that students can recognise that this is a non-communicable disease and check on their understanding of this key term. Moving forwards, a step by step question and answer format is used to show students how to form a long answer. Key terminology such as thrombosis and atherosclerosis are introduced using quick quiz competitions which act to maintain the engagement. The rest of the lesson focuses on a range of risk factors for cardiovascular diseases and time is taken to deepen knowledge of the human anatomy by challenging students to link the names of arteries to the organs that they supply. Progress checks have been written into the lesson at regular intervals so that students can constantly assess their understanding and any misconceptions can be addressed. This lesson has been written for GCSE students (14 - 16 year olds in the UK)

This is a fully-resourced REVISION lesson that consists of an engaging PowerPoint (154 slides) and associated worksheets that challenge the students on their knowledge of topics B1 - B4 (Cell Biology, Organisation, Infection and response and Bioenergetics) of the AQA GCSE Combined Science Trilogy specification and can be assessed on PAPER 1. A wide range of activities have been written into the lesson to maintain motivation and these tasks include exam questions (with answers), understanding checks, differentiated tasks and quiz competitions. The lesson has been designed to include as much which of the content that can be assessed in paper, but the following sub-topics have been given particular attention: Eukaryotic and prokaryotic cells Structure of a bacterium The functions of the components of blood Specialised cells Active transport Osmosis Structure of DNA Mitosis and the cell cycle Functions of the organelles of animal and plant cells Electron microscopy Calculating size Arteries and veins The risk factors of CHD CHD treatments The structure of the heart Bacterial, fungal and viral diseases The mathematic elements of the Combined Science specification are challenged throughout the resource. Due to the size of this resource, it is likely that teachers will choose to use it over the course of a number of lessons and it is suitable for use in the lead up to the mocks or in the lead up to the actual GCSE exams.

An engaging and informative lesson presentation (49 slides) looks at the differences between contact and non-contact forces and focuses on enabling students to describe and recognise them. This lesson has been written for GCSE students but could be used in higher ability KS3 lessons with students who are looking to progress their knowledge. The lesson begins by introducing the fact that forces can be grouped into these two categories and initial definitions are used to ease the students into the lesson. To follow on from this a competition called “FORCE it together” is used. This engaging game challenges the students to spot the name of a force which is in anagram form and then once it has been identified, they have to determine whether it would be a contact or non-contact force. As each force is met, key details are given and discussed. More time is given to areas which can cause problems for students, such as the use of weight and gravity force and whether they are actually different. Moving forwards, a rugby tackle is used to show the numerous forces that interact in everyday situations, before students are challenged to identify more forces in sports of their choice. Students will recall/learn that force is a vector quantity and therefore is represented in diagrams using arrows. Once again, this lesson focuses on showing them how these arrows can be used differently with the different types of forces. Students are briefly introduced to the idea of a free body diagram and an understanding check is used to see whether they can identify friction, gravity force and normal contact force from the arrows. Progress checks like this are written into the lesson at regular intervals, in a range of formats, so that students are constantly assessing their understanding. The final part of the lesson is one more quick competition where students have to use their knowledge of the forces to form words.

An engaging lesson presentation (95 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within TOPIC 4 (Chemical changes) of the AQA GCSE Chemistry specification (specification point C4.4) The topics that are tested within the lesson include: Reactivity series Extraction of metals and reduction Oxidation and reduction in terms of electrons Reactions of metals with acids Neutralisations Titrations Electrolysis Half equations Students will be engaged through the numerous activities including quiz rounds like “It’s time for ACTION” and “Number CRAZY” whilst crucially being able to recognise those areas which need further attention

This extensive and fully-resourced lesson describes the principles and explains the techniques used in the production of recombinant DNA in genetic engineering. Both the engaging PowerPoint and accompanying resources have been written to cover points 6.1.3 (f) (i & ii) of the OCR A-level Biology A specification. The lesson begins with a definition of genetic engineering and recombinant DNA to allow students to begin to understand how this process involves the transfer of DNA fragments from one species to another. Links are made to the genetic code and transcription and translation mechanisms, which were met in module 2, in order to explain how the transferred gene can be translated in the transgenic organism. Moving forwards, the method involving reverse transcriptase and DNA polymerase is introduced and their knowledge of the structure of the polynucleotides and the roles of enzymes is challenged through questions and discussion points. Restriction enzymes are then introduced and time is taken to look at the structure of a restriction site as well as the production of sticky ends due to the staggered cut on the DNA. A series of exam-style questions with displayed mark schemes are used to allow the students to assess their current understanding. The second half of the lesson looks at the culture of transformed host cells as an in vivo method to amplify DNA fragments. Students will learn that bacterial cells are the most commonly transformed cells so the next task challenges their recall of the structures of these cells so that plasmid DNA can be examined from that point onwards. The following key steps are described and explained: • Remove and prepare the plasmid to act as a vector • Insert the DNA fragment into the vector • Transfer the recombinant plasmid into the host cell • Identify the cells which have taken up the recombinant plasmid • Allow the transformed host cells to replicate and express the novel gene Time is taken to explore the finer details of each step such as the addition of the promoter and terminator regions, use of the same restriction enzyme to cut the plasmid as was used to cut the gene and the different types of marker genes. As well as understanding and prior knowledge checks, quick quiz competitions are used throughout the lesson to introduce key terms such as cDNA and EcoR1 in a memorable way.

This is a highly-detailed revision resource which has been designed to be used over a number of lessons and allows teachers to dip in and out of the material as fits to the requirements of their classes and students. The resource consists of an engaging and detailed powerpoint (132 slides) and worksheets which have been differentiated to allow students of differing abilities to be challenged and access the work. The lesson consists of a wide range of activities which will engage and motivate the students and includes exam questions, quiz competitions and quick tasks. The mathematical element of the course is challenged throughout the lesson The lesson has been designed to cover as many of the sub-topics within topics 5, 6 and 7 of the AQA GCSE Biology specification, and will be covered in paper 2, but the following sub-topics have been given particular attention: Topic B5: Homeostasis and response IVF The central nervous system The structure and functions of the eye Diabetes Control of blood glucose concentration Topic B6: Inheritance, variation and evolution The structure and function of DNA Mutations and their effects on phenotypes Genetic terminology Inherited disorders Classification Topic B7: Ecology Ecological terms The Carbon cycle This revision resource can be used in the lead up to mocks or the actual GCSE exams and due to its size, it could be repeatably used to ensure that students develop a deep understanding of these topics.

An engaging lesson presentation (88 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit B5 of the AQA GCSE Biology specification. The topics that are tested within the lesson include: Homeostasis Structure and function of the nervous system Control of body temperature Human endocrine system Control of blood glucose concentration Maintaining water balance in the body Hormones in human reproduction Contraception The use of hormones to treat infertility Negative feedback Students will be engaged through the numerous activities including quiz rounds like "Have they got the right BALANCE?" and "Take the IVF Hotseat" whilst crucially being able to recognise those areas which need further attention

This engaging lesson presentation (58 slides) and associated worksheets uses exam questions with displayed mark schemes, quick tasks and quiz competitions to enable students to assess their understanding of the topics found within module B4 of the OCR Gateway A GCSE Biology specification. The topics which are specifically tested within the lesson include: Ecosystems, Competition and interdependence, Pyramids of biomass, Efficiency of biomass transfer, The carbon cycle and Decomposers Students will enjoy the competitions such as "Number CRAZY" and "Take the HOTSEAT" whilst crucially being able to recognise those areas which need their further attention

A fully-resourced lesson which uses a step-by-step guide to show students how to write fully balanced symbol equations. The lesson includes an engaging lesson presentation (38 slides) and associated worksheets containing questions which iaredifferentiated. The lesson begins by talking the students through the three steps involved in writing a chemical symbol equation. The first step involves writing in the formula for the elements. Students are introduced to the term, diatomic, and shown the 8 molecules that have to be written as a pair of atoms. Moving forwards, students are shown how to write chemical formulae for ionic compounds. They are reminded of how to use the group of the Periodic Table to work out the ion charge and how this is crucial when writing the formula. They are also shown how to write formulae which include brackets which is necessary when the charged molecules are involved. Finally, students are reminded of the rules of balancing symbol equations. There are progress checks at each stage so that students can assess their understanding and any misconceptions can be be addressed immediately. Time is taken to talk about state symbols, in case the exam question requires these to be included in the equation. The final section of the lesson involves students bringing their new-found skills together to write symbol equations for a range of reactions, including a neutralisation and reversible reaction. This task is differentiated so that students who need a little bit of assistance can still access the work. This lesson has been written for GCSE students (14-16 year olds in the UK)

This detailed lesson describes the pressure changes that occur during the cardiac cycle and explains how ECG traces can be interpreted. The PowerPoint and accompanying resources have been designed to cover points 4.4 (iii) & (v) of the Edexcel A-level Biology B specification and focuses on the importance of the valves in ensuring unidirectional movement of blood during the cycle. The start of the lesson introduces the cardiac cycle as well as the key term systole, so that students can immediately recognise that the three stages of the cycle are atrial and ventricular systole followed by diastole. Students are challenged on their prior knowledge of the structure of the heart as they have to name and state the function of an atrioventricular and semi-lunar valve from an internal diagram. This leads into the key point that pressure changes in the chambers and the major arteries results in the opening and closing of these sets of valves. Students are given a description of the pressure change that results in the opening of the AV valves and shown where this would be found on the graph detailing the pressure changes of the cardiac cycle. They then have to use this as a guide to write descriptions for the closing of the AV valve and the opening and closing of the semi-lunar valves and to locate these on the graph. By providing the students with this graph, the rest of the lesson can focus on explaining how these changes come about. Students have to use their current and prior knowledge of the chambers and blood vessels to write 4 descriptions that cover the cardiac cycle. The final part of the lesson covers the changes in the volume of the ventricle. The remainder of the lesson focuses on the ECG and explains how these traces can be interpreted to diagnose heart problems. A quiz competition is used to introduce the reference points of P, QRS and T on a normal sinus rhythm before time is taken to explain their representation with reference to the cardiac cycle. Moving forwards, a SPOT the DIFFERENCE task is used to challenge the students to recognise differences between sinus rhythm and some abnormal rhythms including tachycardia and atrial fibrillation. Bradycardia is used as a symptom of sinus node disfunction and the students are encouraged to discuss this symptom along with some others to try to diagnose this health problem.

An engaging lesson presentation (88 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within module B3 of the OCR Gateway A GCSE Biology specification. The topics that are tested within the lesson include: Nervous system Reflexes Hormones Negative feedback The menstrual cycle Controlling reproduction Using hormones to treat infertility Controlling body temperature Controlling blood sugar Maintaining water balance Inside the kidney Students will be engaged through the numerous activities including quiz rounds like "Have they got the right BALANCE?" and "Take the IVF Hotseat" whilst crucially being able to recognise those areas which need further attention

This detailed and engaging lesson uses a range of tasks, discussion points and quick competitions to explore how the structure of metals is related to their properties. The lesson begins by providing the melting points for four metals and challenging the students to work out why mercury would be considered to be the odd one out. This task enables students to recognise that most metals are solid at room temperature and then the next part of the lesson guides students through explaining how this is related to the structure. The range of quick competitions are used to maintain engagement but also to introduce new terms such as lattice and delocalised so that students can recognise these in descriptions and use them accurately in their own. Students will recall that metals are good conductors of electricity and heat and now will be able to explain this with reference to the free electrons. Progress checks are written into the lesson at regular intervals so understanding can be checked at critical points and misconceptions addressed. The final part of the lesson makes link to related topics such as alloys and naming compounds. This lesson has been written for GCSE aged students.

This is a detailed lesson resource that covers the content of point 5.1.3 (a) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply their understanding of the roles of mammalian sensory receptors. There is a particular focus on the Pacinian corpuscle to demonstrate how these receptors act as transducers by converting one form of energy into electrical energy which is then conducted as an electrical impulse along the sensory neurone. The lesson begins by looking at the different types of stimuli that can be detected. This leads into a written task where students have to form sentences to detail how thermoreceptors, rods and cones, hair cells in the inner ear and vibration receptors in the cochlea convert different forms of energy into electrical energy. Students will be introduced to the term transducer and will be challenged to work out what these cells carry out by using their sentences. As stated above, students will meet a Pacinian corpuscle and learn that this receptors detects pressure changes in the skin using the concentric rings of connective tissue in its structure. The rest of the lesson focuses on how ions are involved in the maintenance of resting potential and then depolarisation. Time is taken to look into the key details of these two processes so students are confident with this topic when met again during a lesson on the generation of action potentials. All of the tasks are differentiated to allow students of different abilities to access the work. As well as understanding checks to allow the students to assess their progress against the current topic, there are also a number of prior knowledge checks on topics like inorganic ions and methods of movement. This lesson has been designed for students studying the OCR A-level Biology course

This engaging lesson presentation (52 slides) and associated worksheets uses exam questions with displayed mark schemes, quick tasks and quiz competitions to enable students to assess their understanding of the topics found within module B2 of the OCR Gateway A Combined Science specification. The topics which are specifically tested within the lesson include: Diffusion, Osmosis, Active transport, Exchange and transport, Circulatory system, Heart and blood, Plant transport systems, Students will enjoy the competitions such as "Where's Lenny?" and "Take the Hotseat" whilst being able to recognise those areas which need their further attention.

This detailed and fully-resourced lesson describes the relationship between the structure, properties and functions of glycogen, starch and cellulose. The engaging PowerPoint and accompanying resources have been designed to cover specification points 2.1.2 (f) & (g) of the OCR A-level Biology A course and continual links are also made to the previous lessons in this topic where the monosaccharides and disaccharides were introduced. The lesson begins with the CARBOHYDRATE WALL where students have to use their prior knowledge to collect the 9 carbohydrates on show into 3 groups. This results in glycogen, starch and cellulose being grouped together as polysaccharides and the structure, properties and functions of these large carbohydrates are covered over the course of the lesson. Students will learn how key structural features like the 1 - 4 and 1 - 6 glycosidic bonds and the hydrogen bonds dictate whether the polysaccharide chain is branched or unbranched and also dictate whether the chain spirals or not. Following the description of the structure of glycogen, students are challenged to design an exam question in the form of a comparison table so that it can be completed as the lesson progresses and they learn more about starch and cellulose. This includes a split in the starch section of the table so that the differing structures and properties of amylose and amylopectin can be considered. The importance of the compact structure for storage is discussed as well as the branched chains of amylopectin acting as quick source of energy when it is needed. In the final part of the lesson, time is taken to focus on the hydrogen bonds between rotated glucose molecules on the same chain and between different chains and to explain how the formation of cellulose microfibrils and macrofibrils provides plant cells with the additional strength needed to support the whole plant. Due to the detail included in this lesson, it is estimated that it will take in excess of 2 hours of allocated teaching time to complete

This is a fully-resourced lesson which uses exam-style questions, quiz competitions, quick tasks and discussion points to challenge students on their understanding of topics B1 - B5, that will assessed on PAPER 1. It has been specifically designed for students on the Pearson Edexcel GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to take place at the local hospital where the students have to visit numerous wards and clinics and the on-site pharmacy so that the following sub-topics can be covered: Cancer as the result of uncontrolled cell division The production of gametes by meiosis Mitosis and the cell cycle Sex determination The difference between communicable and non-communicable diseases The pathogens that spread communicable diseases Identification of communicable diseases Treating bacterial infections with antibiotics Evolution of antibiotic resistance in bacteria Vaccinations Genetic terminology Genetic diagrams Structures involved in a nervous reaction A Reflex arc Risk factors Chemical and physical defences Osmosis and percentage gain and loss Fossils as evidence for human evolution In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for assistance sheets when they are unable to begin a question. Step-by-step guides have also been written into the lesson to walk students through some of the more difficult concepts such as genetic diagrams and evolution by natural selection. Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3 teaching hours to complete the tasks and therefore this can be used at different points throughout the duration of the course as well as acting as a final revision before the PAPER 1 exam.

This fully-resourced lesson describes how Mycobacterium tuberculosis and Human Immunodeficiency virus infect human cells. The PowerPoint and accompanying resources have been designed to cover point 6.6 of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification and ties in directly with the previous lesson where the structure of bacteria and viruses were compared. The lesson begins by ensuring that students recognise that TB is caused by the infection of a species of bacteria known as Mycobacterium tuberculosis and they will challenged to use their knowledge of scientific classification to recall that this pathogen is found in the mycobacteria genus. At this point, the students are told that the cell walls of this genus contain mycolic acids and later in the lesson they will have to work out that this specialist feature enables this pathogen to survive phagocytosis. A series of exam-style questions will challenge their knowledge of the respiratory and immune systems as they can understand how the bacterium travels to the alveoli where it is engulfed by a macrophage. Key terms like granuloma and necrosis are introduced and the sequence of events that occur following the formation of this aggregate of cells is described. The structure of viruses was covered during the previous lesson, so this next part of the lesson starts by challenging the students to recall the capsid, genetic material in the form of viral RNA and the lipid envelope. At this point, the students are introduced to gp120, the glycoprotein which is exposed on the surface of the lipid envelope, as this structure is critical for the entry of the virus into host cells. Students will annotate a basic diagram of HIV with these four structures which also has gp41 labelled. A quick quiz competition introduces the names of the enzymes found inside the capsid Moving forwards, the main task of this part of the lesson describes how HIV binds to the helper T cells, injects its capsid and integrates its DNA into the host’s genome in order to replicate to form virus particles (virions). Students are guided through the formation of a detailed answer about the mechanism of HIV and have to input key terms and structures where information is missing. Students will learn that the increase in the number of virus particles and a decrease in helper T cells and other immune cells results in infections like TB and by opportunistic pathogens and that this stage is recognised as AIDS

This fully-resourced lesson describes the ultrastructure of eukaryotic cells and the functions of the different cellular components. The engaging and detailed PowerPoint and accompanying resources have been designed to cover points 2.1.1 (g) & (i) of the OCR A-level Biology A specification and therefore also describes the interrelationship between the organelles involved in the production and secretion of proteins. As cells are the building blocks of living organisms, it makes sense that they would be heavily involved in all 6 modules in the OCR course and intricate planning has ensured that links to the lessons earlier in module 2.1.1 are made as well as to the upcoming modules. The lesson uses a wide range of activities, that include exam-style questions, class discussion points and quick quiz competitions, to maintain motivation and engagement whilst describing the relationship between the structure and function of the following organelles: nucleus nucleolus centrioles ribosomes rough endoplasmic reticulum Golgi apparatus lysosomes smooth endoplasmic reticulum mitochondria cell surface membrane vacuole chloroplasts plasmodesmata Details of the cilia and flagella are covered in the lesson on the importance of the cytoskeleton. All of the worksheets have been differentiated to support students of differing abilities whilst maintaining challenge Due to the detail that is included in this lesson, it is estimated that it will take in excess of 3 hours of allocated A-level teaching time to go through all of the tasks