This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with an introduction to the main functions of the female and male reproductive systems. This then leads into a task whereby students will firstly watch a video on the structure of the female reproductive system, during which they will need to label a diagram. After this, students will watch a video on the structure of the male reproductive system, again students will need to label a diagram whilst watching this video. Students can then mark their work using the mark scheme provided. Next, students will each be given a card of information which describes the function of one part of either the male/female reproductive system. Students will need to walk around the room and share information with each other to complete their own table to summarise each of these functions. The mark scheme for this task is also included so students can either self assess or peer assess their work. The next activity is a progress check task, students will answer a set of levelled questions based upon what they have learned so far this topic. Once this task has been completed, students can mark and correct their own work. Lastly, students will complete an activity whereby they will be required to match the correct reproductive structure with it’s function, students can self-assess their work once complete, using the answers provided. The plenary task is an anagram challenge - students should try to unscramble the words to reveal 6 key words learned over the last two lessons on adolescence and reproductive systems. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to adolescence and puberty, students will be given a card of information which will read as a class before students answer a set of questions. Once this task is complete, students can self-assess their work using the answers provided. Next, students should discuss with their partner the physical changes that could occur to a boy and girl during puberty, their ideas should be noted down as a mind map in their books. Their work can then be checked and corrected using the mark scheme provided. Students will now be given a set of cards describing physical changes which occur in either boys or girls or both, students will need to cut the cards out and stick them into a table in their books. The mark scheme for this task is included for students to self-assess their work. Lastly, students are introduced to the idea of sex hormones which are what cause the changes that occur in boys and girls during puberty. After this, students will be given a set of levelled questions which they should either complete at the back of their books (higher ability) or use their notes from the lesson (lower/middle ability). The plenary task requires students to summarise what they have learned this lesson in three sentences, using as many key words as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap of the key terms learned over the last few lessons on the topics of the skeleton and joints, students need to match the structure to the correct function. This work can then be self-assessed using the answers provided. Next, students will need to discuss the body muscle groups they already know of with their partner and then create a mind map of their ideas in their books. Students can then check their work against the answers revealed on the PowerPoint. The next activity requires students to correctly label the diagram of the human body with the muscle groups and then identify the function of each muscle group from a list provided. The mark scheme for this task is included for students to mark and correct their work. The next part of the lesson focuses on the antagonistic pairs of muscle. Students are shown a diagram of how biceps and triceps work together to either move the forearm upwards to downwards. After viewing the diagram and the explanation, students are asked to complete a fill-in-the-blank task to summarise this process. Their answers can be self-assessed using the PowerPoint presentation. Lastly, students will complete a progress check in their books - this is a set of questions based upon what they have learned this lesson. This task can be self or peer assessed using the mark scheme provided. The plenary task requires students to write three quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students are firstly given the definition of a joint and are then asked to move around a bit, either in their seats or around the room, and whilst moving they should think about their joints - whether they are all the same, if they move in the same way or not. This leads into an introduction to three types of joint that they need to learn about - ball-and-socket joint, hinge joint and fixed joint. The next part of the lesson will focus on the tissues which comprise a joint - namely tendons, ligaments and cartilage. Students will be given information sheets, either on their table or placed around the room. Using this information they will need to complete a summary table of the three tissues - the location of the tissue (what it is connected to), a description of the tissue and it’s role in the joint. Once students have completed this task they can self-assess their work using the mark scheme provided. Next, students will conduct an investigation into muscle strength. Students will work in pairs, following the method provided on the PowerPoint to measure the strength of their triceps, biceps and forearm using a Newton Scale. Their results should be recorded in a suitable table. Lastly, students are given a worksheet to summarise what they have learned on this topic so far. They will need to complete the sentences with the correct key word, this word can then be found within the word search. The mark scheme for this task is also included so students can mark and correct their work. The plenary provides two choices for students, either unscramble the anagrams of key words from the lesson or using the key word selection provided, write a summary of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a video of a song about bones, students can watch the video a couple of times whilst trying to fill in a worksheet to label the main bones of the body. Once students have tried to do this, they can check their work against the answers included in the PowerPoint. Next, students are introduced to the structure of a bone - living tissue which is comprised of hard and spongy parts, along with bone marrow. Students can take some time to sketch a cross-section of the bone into their books, adding labels of these three main parts. The next part of the lesson focuses on the function of the skeleton, firstly students are asked to ‘Think > Pair > Share’ their ideas about the function of a skeleton. After a short class discussion students can feed their ideas back to class and the answers are revealed for students to mark and correct their work. To summarise the main functions, students should complete the ‘copy and complete’ task, this can be marked using the mark scheme included. Lastly, in pairs students will read some information about vertebrates and how to protect the skeleton. Students will need to answer a set of questions using this information, they can complete the task in their books and talk to their partner for help. The mark scheme for the task is included in the PowerPoint presentation so students can mark their work once it is complete. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an activity whereby students are asked to sit quietly for a few minutes and think about what is happening to their bodies when they breathe in and out. Hopefully students recognise that their chest rises up as muscles contract and relax. This then leads to a video, students should watch the video and whilst watching they will need to complete a fill-in-the-blank task which summarises what is happening inside the lungs during inhalation and exahalation. The answers to this task are included in the PowerPoint so students can self-assess their work once it is complete. Next, students will be given a cartoon strip demonstrating the stages of both inhalation and exhalation, with some information missing. Higher ability students will be given a cartoon strip where they need to create captions for each diagram, lower/middle ability students will be required to fill in the blanks for each caption. The mark scheme for this task is included in the PowerPoint so students can self-assess their work once it is complete. Next, the bell jar model is introduced which demonstrates what happens to the lungs during inhalation and exhalation. The teacher can conduct a demonstration using the bell jar model, students will need to come up with an explanation for what is happening when the teacher either pulls down on the rubber sheet or pushed upwards on the rubber sheet. Students can check their responses to this task using the answers included in the PowerPoint presentation. The last slide shows students the practical apparatus that can be used to measure total lung volume in the lab, students can have a go at using this apparatus if there is time at the end of the lesson. The plenary is a word search activity, students will need to find a list of words which are related to the breathing and gas exchange lessons. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the gases that we breathe in and out of our bodies, via the respiratory system. Students will then be shown a diagram of the main components of the respiratory system, they will have 3 minutes to try to remember the locations of as many structures as possible. The image will then be taken away and they will be give a blank worksheet, without the labels, now they will need to correctly identify as many structures as they can remember. This work is then self-assessed using the mark scheme provided. The next activity requires students to watch a video, whilst watching they will need to answer a set of questions about the structure and function of the respiratory system. Once complete students can self-assess their work using the mark scheme provided. The next part of the lesson focuses on composition of gases in inhaled air vs. exhaled air. Students will be given a worksheet which provides some data on the percentage composition of gases in inhaled vs. exhaled air, students will need to answer questions using this information. The mark scheme for this task is included in the PowerPoint for students to assess their work once it is complete. The plenary task requires students to complete an exit card which will include 3 things learned this lesson, 5 key words and 1 question to test your peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the levels of organisation found within multicellular organisms. Students are then asked to sort the following into the correct order, according to size: cell, organ system, tissue and organ. Students are then shown the definitions for each of the following: cells, tissues and organs before being asked to complete a mind map of organ systems they alread know of. After spending a few minutes on this task, some of the example answers can be revealed for pupils to mark their work. Students are now given a list of organs and are asked to pick the organs which belong to the digestive system, respiratory system and water transport system of plants. Once this task has been completed, students can self-assess their work using the mark scheme provided. The next activity requires students to match the correct organ system name to the correct role of that organ system and then pupils need to complete a fill-in-the-blank task, the answers to both these tasks are included in the PowerPoint for students to self-assess their work. Lastly, students are given a card sort containing organs/cells/tissues - students will need to match the correct cell to the correct tissue and then organ, this can be stuck into a table in their books. This work can then be self-assessed using the mark scheme provided. Students will finally complete a ‘Team Poster Challenge’ to end the lesson. The plenary requires to spend one minute talking to the person next to them about what they have learned this lesson! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to two unicellular organisms - euglena and amoeba. Students can also watch a video to demontrate the motion of an amoeba cell. The main task involves students completing a set of tasks using information sheets on amoeba and euglena cell structure, function and reproduction. Students should work their way through the tasks, once this is complete they can self-assess their work using the mark scheme provided. Next, students should summarise what they have learned during the lesson by completing the fill-in-the-blank task, the answers to this task are included in the PowerPoint so students can self-assess their work once it is complete. Lastly, students will need complete a ‘Key Word Bingo’ activity, they will need to choose 6 words from the list provided. The teacher then reads out a definition, if this definition matches one of the words written down then it can be crossed out. First student to cross all 6 words from their books/grids shouts bingo! The plenary task is a 3-3-1 reduction - students will write down 3 facts, 3 key words and reduce this to 1 key word from the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the substances that move in and out of cells via a process called diffusion. Students are then asked to summarise this information by sketching and labelling a diagram of a cell. The idea of diffusion is further explained using an image of a deodrant bottle spraying smelly particles into the air and showing how they spread from an area of high concentration to an area of low concentration. A definition of this process is shown to students, before they are asked to complete a fill-in-the-blank task to summarise the process, this work can be self-assessed using the mark scheme provided. Next, students will need to sketch diagrams demonstrating the various stages of diffusion, and will need to match the correct statements to the correct diagrams. This work can be then be self or peer assessed using the mark scheme provided. The next part of the lesson looks at factors that affect diffusion, students are firstly asked to ‘Think > Pair > Share’ their ideas on the factors which might affect the rate of diffusion. After students have fed back into class discussion, the answers are revealed for students to note down in their books. They will then look more closely at the effect of temperature on the rate of diffusion by watching a video and then summarising what they have learned by completing a fill-in-the-blank task. Lastly, students are shown diagrams of plant cells of healthy plants vs. wilted planted to demonstrate the effect of having too much/too little water in the vacuole of plant cells. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with an introduction to the definition of ‘specialised’, which follows on to define a ‘specialised cell’ as a cell that has special structures/features to help it carry out its job. Students are then shown some diagrams of specialised cells and are shown a video, whilst watching the video they are asked to note down as many specalised cells as they can. This work can then be checked and corrected using the answers provided on the PowerPoint. Students will now each be given a card of information about a the structural features and functions of certain specialised cells. Students will need to walk around the room, sharing information in order to complete a summary table. Finally, students are asked to complete an ‘Assessment Task’, which is a set of exam-style questions based upon what they have learned the last two lessons. Students can write their answers in their books, the mark scheme for these questions is included so students can assess their work. Lastly, students are asked to complete a ‘Job Advert’ for one of the specialised cells they have learned about this lesson, the advert should include a description of the job itself and the sort of traits required to perform the job. The plenary task requires students to copy and complete a set of sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with a ‘Cells Rap’ - students will be shown a video, during which they need to write down as many cell organelles as they can. Once they have finished watching their work can be self-assessed using the answers provided. Next, students will be shown a diagram of an animal and plant cell with the organelles labelled. Students are asked to note down the similarities and differences between these two cells, the answers to this task can then be revealed using the PowerPoint presentation. This is followed by a comprehension task whereby students will need to read an information sheet on ‘Animal & Plant Cells’, using this information they will need to answer a set of questions. The mark scheme for this task is included so students can self or peer assess their work once it’s complete. Next, students will learn about the functions of each of the organelles. Students will be given a card of information about the function of one of the organelles. They will need to walk around the room, sharing information in order to complete the summary table. Again, this work can be self-assessed once complete. Lastly students will complete a ‘Team Challenge’ in groups, each group will stand behind a poster and every person has one go to fill in part of the poster (either name/function of organelles), the fastest group to complete the poster correctly wins! The plenary requires students to summarise what they have learned in the lesson by completing the sentence starters provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to cells as the building blocks of life and the smallest units found in living organisms, this is demonstrated with diagrams of animal and plant cells. The scientist Robert Hooke is then introduced as someone who firstly coined the phrase ‘cell’ after observing plant tissue down a microscope, this leads into the main part of the lesson which is on microscopes. Students will be shown a diagram of a microscope and are told some details of factors which should be considered when observing a specimen using a microscope. A video is then played which students need to watch in order to complete a ‘fill-in-the-blank’ task which summarises how to use a microscope and the main parts of the structure of a microscope. This task can be self-assessed using the mark scheme provided. Once this task has been completed it can be self-assessed using the mark scheme provided. Next, students are shown how to calculate the total magnification of a microscope using the magnification of the objective lens and the eyepiece lens. Students will then need to work their way through a set of problems using this calculation. The answers to this task is included in the PowerPoint so students can mark and correct their work. The last part of the lesson requires pupils to follow the instructions included in the PowerPoint to prepare an onion slide to then observe plant cells under the microscope. Once students have carefully prepared their slide they should observe the plant cells at a range of magnifications, sketching a diagram of their observations onto the worksheet provided The plenary requires pupils to copy and complete sentences which summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a video displaying the short-term and long-term effects of alcohol on the body. Students can watch the video and whilst watching create a mind map of the different effects, this work can then be self-assessed using the mark scheme provided. Next, the effect of alcohol on the liver and brain are specifically highlighted using the PowerPoint presentation, students will then need to compete a fill-in-the-blank task to highlight these specific risks. Again, the answers to this task are included in the PowerPoint presentation for students to self-assess and correct their work. Students are now shown some data and will need to answer a set of questions based on this data, the mark scheme for this task is included in the PowerPoint for students to mark and correct their work. The last part of the lesson focuses on the effect of alcohol on pregnant women and their unborn child. Students will watch a video, during which they will need to answer a set of questions. This work can then be self-assessed using the mark scheme provided. The plenary task requires students to write a twitter message about what they have learned this lesson, students should include #keywords from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with some facts and figures about the rates of smoking around the world, how many cigarettes are smoked daily and the different chemicals found in cigarette smoke and which of these are linked with disease. Students will now watch a video on the chemicals found in cigarette smoke and the damage these chemicals can do to the body, whilst watching the video students will need to answer a couple of questions. The answers to these questions are then revealed using the PowerPoint, students can self-assess their work. Students will now watch another video on smoking and the effect on your health, students will be given a set of questions that they will need to answer using the video. Once this task is complete, students will self-assess their work using the mark scheme provided. The latter part of the lesson involves an activity whereby students will be given a worksheet of questions, there will be information posters placed around the room which students will need to use to answer questions on their worksheet. The mark scheme for this task is included in the PowerPoint presentation for students to peer-assess their work with their partners. The last task is for partners to complete a ‘feedback quadrant’ of their partners work, this includes a positive comment, something they missed out which should have included and a question to test their understanding of the lesson content. The plenary activity requires students to complete a 3-3-1 reduction - 3 facts, 3 key words and then reduce this to 1 key word from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a recap on background radiation, students need to create a mind map in their books of the different source of background radiation. Once this task is complete students can mark their work against the answers provided. This is followed by a task whereby students will complete a worksheet about background radiation, the mark scheme for this task is included so students can self-assess their own work. Next, pupils will need to recap their knowledge of the dangers of alpha, beta and gamma radiation. Students will need to copy and complete a table which summarises the dangers of these three types of radiation, inside and outside the body. Students can self-assess this task once it has been completed, using the mark scheme provided. The next part of the lesson focuses on radioactive waste, firstly students are given some information about the type of waste that is produced by a nuclear power plant. Students will then watch a video on the topic, during which they will need to answer a set of questions. This work can be marked and corrected using the answers provided. Students are now shown information about Chernobyl and Fukishima, two videos on the topics help to demonstrate the ideas written on the PowerPoint presentation. This is followed by some details of designs for new nuclear reactors which will be built in the next 20 years, students need to understand the advances made in safety and design for third-generation nuclear reactors. Lastly, pupils will complete a set of exam-style questions on radioactivity. This work can be self-assessed using the mark scheme provided. The plenary requires pupils to come up with questions for a set of answers that are provided on the PowerPoint. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson with a ‘Think > Pair > Share’ task where students will consider what they think may be happening during a ‘Nuclear Fusion’ or ‘Nuclear Fission’ reaction. Once students have fed back as a class discussion, the definitions for each process can be revealed using the PowerPoint. Students will now watch a video outlining the basic principles of these two processes, whilst watching the video they will answer a set of questions. Once this work has been completed they can self-assess using the mark scheme provided. Next, students are shown a diagram of a chain reaction, students will need to sketch a cope of this into their books alongside an explanation of this process in context of nuclear fission. The next activity requires students, in pairs, to teach each other about the principles of a nuclear reactor vs. fusion reactor, after being given a set of information on the topic. Students will then need to answer a set of questions into their books about these two types of reactors, the work can be self-assessed using the mark scheme provided. Lastly, students will complete a radioactivity crossword based upon knowledge they have learned throughout the radioactivity topic, the answers to this task is also included so pupils can mark their own work. The plenary requires students to complete a set of sentence starters to summarise what they have learned this lesson, what they already knew about this topic before the lesson and what they would like to learn more about. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)