A 19 slide powerpoint, which covers all key information on Design for Maintenance, Repair and Disposal. 6 R’s, Upcycling, strategies for disassembly, design for durability etc. Lesson starts with spaced retrieval (maths this time), and consolidates with 2 exam questions (with mark scheme). Includes video, and practical session disassembling a mouse/keyboard (normally I find a broken one from ICT).

An editable (using powerpoint) or printable template for whole school SWOT analysis. Sheet includes prompts.

A 17 slide powerpoint covering material testing in readiness for NEA. This focusses on testing techniques you can easily do in school (tensile, hardness, toughness, energy (heat) transfer etc. Within the powerpoint are photographs and videos of each test taking place in the workshop (they are made by me - not just a youtube video). The theory works as a standalone presentation, but if you wanted to make your own testing rigs, I have made a few simple contraptions to make testing more controlled which are also shown in the powerpoint photos/videos in use - all 3 would be easy to make in any DT workshop in a few hours. There is an accompanying handout for recording any practical tests that students do. Always one of the favourite lessons of year 10, and they get to complete a piece of NEA in the process too! As with all my lessons, they come with a key question to begin and relevant exam questions (with mark scheme) to conclude.

16 Slide PowerPoint covering the necessary theory for AQA A-Level Design & Technology. Lesson includes group tasks, mini white board Q’s along with a starter task / exam question consolidation/plenary.

A 17 slide powerpoint covering material testing in readiness for NEA. This focusses on testing techniques you can easily do in school (tensile, hardness, toughness, energy (heat) transfer etc. Within the powerpoint are photographs and videos of each test taking place in the workshop (they are made by me - not just a youtube video). The theory works as a standalone presentation, but if you wanted to make your own testing rigs, I have made a few simple contraptions to make testing more controlled which are also shown in the powerpoint photos/videos in use - all 3 would be easy to make in any DT workshop in a few hours. There is an accompanying handout for recording any practical tests that students do. Always one of the favourite lessons of year 12, and they get to complete a piece of NEA in the process too! As with all my lessons, they come with a retrieval exercise to begin and relevant exam questions (with mark scheme) to conclude.

A 17 slide PowerPoint addressing the product life cycle: introduction - growth - maturity - decline. The presentation includes case studies, connect activity and consolidation exam questions with a student facing mark structure.

Powerpoint designed to support the teaching of Inclusive Design 21 slides including starter/consolidation tasks along with a case study summarising exercise.

A silly one off lesson which takes around an hour. Works well for induction sessions. Lesson starts off with a deadpan question about if students saw the news? What follows are some slides to support a highly spurious tale about rockets being fired from the Isle of White into deep space, supported by some faked newspaper articles about aliens. It all comes down to a meeting is needed, and it will be in the O2 arena (The Millenium Dome as it’s visible from space), but what will they sit on? How do you design a chair for a creature you’ve never met? The lesson is designed to encourage interaction within groups of students who don’t know each other, and also raises some questions about user centered design. Pairs / Groups then present their ideas (with good evidence about where the tail goes). It lasts about an hour, brings a smile to the face, and engages students. Included is a powerpoint (and a pdf version too). There is no lesson plan, it somewhat ‘runs itself’ from the powerpoint.

Powerpoint designed to cover the required theory for IP within A-level D&T. Patents Registered Designs Copyright Trademarks Combinations How to apply & examples 13 slides - lesson includes spaced retrieval / starter and consolidation activities.

A 17 slide PowerPoint, running through the needed knowledge for AQA A-level D&T. This covers the types of composites, along with examples of each. Several curated youtube videos are also included to bring the theory to life.

Enclosed is a printable self contained cover lesson based on the Red Bull Air Race. Essentially students sketch a series of primitive forms in isometric, then add an arrow to show the path of the plane. Arrows to show openings, swings, drawers etc. are not used very well by students in product design, so this task was designed to bring on that skill. The sheet is printable in A3, and would has instructions enclosed. It also has a PowerPoint to accompany it, including stage steps, if that facility is available (including a 3 minute video to engage the students on what an air race is like). All files are fully editable (hand out made in PowerPoint too). I have used this for many different age groups successfully, and usually leads to a very quite and engaged cover lesson!

I readiness for this year’s exam season, this is a 3 page countdown calendar made in powerpoint which asks a key question each day in the run up to the exam. Dates are from Easter to the end of June. I usually encourage my children to pin the 3 sheets up in their kitchen, and answer the question whilst making breakfast! The students like it, and it often brings about greater revision as the questions lay bare the gaps in knowledge. Although in powerpoint, the page is set up to be A4, so will print perfectly on a sheet (tip: I usually save as pdf before printing and then print that, as you can get it closer the edges as a pdf!) NB: The template has questions for GCSE D&T within, and the exam date is also for AQA GCSE D&T, but just needs editing to suit your own subject, Key Stage and classes. English / Maths / Science / Geography / History / RE / French / German / Drama / Music / Food / CS / Business Studies / ICT Also enclosed is a few hints for good revision (including a slide you can use when launching this) Hope it helps!

Powerpoint designed to cover the required theory for Major Developments in Technology within A-level D&T. Sir Clive Sinclair Case Study Age of Microelectronics Gordon Moore and Moore’s Law Information Age Impact of ICs Product History Task 2 exam questions are also included. 23 slides - lesson includes spaced retrieval starter, questions for show-me-tell-me boards and consolidation activities.

A lesson which could be used as part of an induction process for KS4 or KS5. Lesson focusses around refelctions on a user profile, followed by the design of a water bottle for the user (handouts include space for itterations). This resource was designed to be used alongside ‘user profile boxes’ which is where you make up 4 boxes, with each box containing 10-15 posessions of a key person e.g. Retired lady - china mug, saga magazine, item of clothing etc. Young boy - plastic dinosaur, lego magazine, etc. Initial ‘investigation’ and user profile would be carried out in groups (one group per box). Students complete profile sheet. NB: you will never answer all questions from the items in a box, so assumptions are needed reflecting on evidence to hand. Students then individually design their bottles, but then present them back to the sub groups afterwards, and a ‘professional argument’ to cross check the design suitability is structured in.

11 Slide powerpoint covering the necessary elements of theory for AQA GCSE Design & Technology. Lesson has a starter question, and further questions as a consolidate.

8 Slide powerpoint covering the necessary elements of theory for AQA GCSE Design & Technology. Lesson has a starter question. The lesson also includes a practical activity investigating some fittings (you can make up some demos if desired - photos enclosed, and a CAD file for 3D printing some feet for an M8 bolt)

Enclosed in this pack are three resources for distribution. Parental/Student focussed help sheet for installing the classroom app, and accessing via the web (you will need to personalise some elements of this to your own school, but will save you hours!) Teacher’s help sheet as to the best ways of accessing and using Google Meets. A teacher’s help sheet for making more efficient use of assessment within Google Classroom (such as rubrics, voice dictation and such). All have been used for a few months, and have had positive feedback.

A one hour theory session covering the elements needed for energy generation and storage. Includes course textbook page links. The powerpoint has been written to aid note taking (i.e. when you move to the next slide the key elements of the previous are still seen) - I have found this very useful for early in year 10.

A set of 14 powerpoint slides, to be used as a ‘landing’ or ‘holding’ page for GCSE D&T lessons, while a group arrives online. Essentially, start your meeting, start the presentation, and leave it full screen while the children enter. Each slide will take around 5 minutes for them to complete individually. They are framed whereby they can compose their answers in the chat function, and are not to hit send until asked. Topics cover a variety of theory from across the subject, and each slide has a moving gif image to engage.

A Microsoft Word template (and an example) of a specific risk assessment. I have included an excel tracking grid of all needed specific risk assessments (for my school, you will need to edit for your own situation), which I used to allocate the writing of them amongst my team.