Please rate this resource and leave feedback

This is a chemistry lesson designed for the 2016 specification for the exam board AQA. The updated specification specifically makes reference to chlorine and iodine and so the results of alkene tests with these halogens has been included. There is a practical that is based on a RSC practical. Instructions and safety advice for the practical are included in the lesson. Please only carry out the practical in a room with windows that is well ventilated. The lesson starts with a recap of cracking - this is taught previously in my scheme of work. It then moves on to alkene formulae. The students then carry out the alkenes and bromine water practical. They then write word and symbol equation for the tests. More able students can identify the functional groups in the molecules. The lesson finishes with a fun plenary using whiteboards. Please rate this resource and leave feedback.

This is a thoroughly differentiated chemistry lesson that has been designed for the new 2016 specification for AQA. This specification does not require students to know biodiesel but does require students to know hydrogen and combustion. The lesson starts with a hydrogen balloon demo. Please take when doing this. Students can ignite the balloon if they use a lit split on the end of a metre ruler and stand back. They put the lit splint underneath the balloon which explodes. There is an alternative settler wordsearch for hyperactive classes that need to calm down at the start of the lesson. Students then write a disadvantage and advantage of using hydrogen as an alternative to petrol on post it notes and stick these on the whiteboard (one student per bench can do this - collecting the others from their bench). Students then write down the advantages and disadvantages of different fuels and write an answer to a 6 mark exam question where they compare the fuels and justify which one is best. They peer mark their answers using a student friendly marking grid. Finally students balance combustion symbol equations. Please rate this resource and leave feedback.

This lesson forms the second lesson in the AQA 2016 specification 4.7 organic chemistry scheme of work and comes after lesson 1 crude oil. The lesson is designed to develop independent practical skills - something that is often developed at Key Stage 3 when there is more curriculum time but is missed out at GCSE in order to cover all of the subject content needed for the exams. The lesson begins with considering the properties that a good fuel should have. It is worth pointing out to students that these are the main properties of hydrocarbons. Alkanes and alkenes are covered later in this scheme of work so reference is not made to them in this lesson. Students then read two sources and choose one of them to write a summary on their method sheet. They then carry out a risk assessment of the method that they have chosen. The practical that they do is using a pipette with a small hole in the side - these need to be prepared in advance by the technicians. Students put the pipette in the oil and then cover the hole as they lift up the pipette. They then open the hole (move the finger of the way) and time how long it takes for the oil to move from 3m to 1ml. The lesson finishes with an exam plenary question (markscheme is provided). It is suggested that water baths are used to heat the jars or beakers of vegetable oil. Please rate this resource and leave feedback.

This GCSE chemistry lesson forms the first lesson in 4.7 organic chemistry in the updated 2016 specification for the exam board AQA. It can also be used with other GCSE exam boards. The lesson starts with students considering whether they agree or disagree with 3 statements about the future use of petrol. The students are then introduced to how crude oil is made and evaluate the advantages and disadvantages of using crude oil. The students could cut the statements out and sort them or colour code them. The final task is where students calculate the temperature increase of water when it is heated by different fuels using data that is provided. More able students are given a formula that is used to calculate the energy increase in Joules then divide by the number of grams of fuel used to calculate the energy increase in Joules per gram. Please rate this resource and leave feedback.

This is a set of blank and completed glossaries for the higher and foundation papers. They are designed to cover the 2016 specification. Please rate this resource and leave feedback.

This is a giant crossword with answers for the AQA GCSE 2016 chemistry specification (topic 4.1 atomic structure). There are 14 questions that cover subatomic particles, ions and the periodic table. This complements my lesson resources on atomic structure. Please rate this resource and leave feedback.

This is a lesson written for the AQA 2016 chemistry specification that covers the following: the three types of bonding, the reaction of sodium chlorine demo, how to work out the charge on an ion by comparing the number of protons and electrons, why ions form (stable octet) and how to work out the formula on an ionic compound using a method that I have created called 'WiSC'. The lesson concludes with a differentiated plenary. Please take the time to carefully look through this presentation before the lesson as there a lot of animations that carefully sequence different concepts. Please rate this resource and leave feedback.

This GCSE chemistry lesson on transitions metals has been designed to meet the AQA 2016 specification and is part of the 4.1 atomic structure scheme of work. The lesson starts with a recap of the order of the reactivity series and asks students to put lithium and rubidium in this series using prior knowledge from reactions of the alkali metals (required prior learning). Students are then introduced to the key question for the lesson - this is revisited at the end. Students then watch a 4 minute video about the SR71 Blackbird (YouTube link is on the slide). This is the worlds fastest jet powered plane that is no longer used by the American military and flew at speeds of up to mach 3.2. Students then write on post it notes three properties that metals used to make this plane should have. If they struggle they could choose 3 properties from the data sheet. These are put on the whiteboard with their names on the notes and one student comes to the front to read out 3 post it notes. The teacher could compare the reactivity of iron filings and potassium with water (RSC practical link is included and can also be found online). Students then answer a few questions that require analysis of the data sheet. This is an important exam skill. They then use these answers to write an extended 6 mark question and then peer mark this using the student friendly marking grid. There is an optional 4 person role play task included in a separate PowerPoint for longer lessons or classes that are good with group work. The lesson menu can be printed and used with weaker students. Please rate this resource and leave feedback.

This lesson has been designed for the 2016 GCSE AQA specification for the 4.1 atomic structure scheme of work. The lesson is thoroughly differentiated for higher and lower ability and includes a fun sodium reacting with chlorine demo. It is recommended that the Royal Society of Chemistry practical guidelines are followed - a link to these are included in the PowerPoint. The demo MUST be carried out in a fume cupboard as chlorine gas is extremely toxic. It is suggested that the sodium is heated on a brick rather than a deflagrating spoon then an inverted bell jar of chlorine gas is placed on top. This is because the chlorine gas reacts with the iron from the deflagrating spoon. The lesson starts with a recap of atomic structure (required prior learning) then moves on to the demo and then a discussion of how atoms react to form ions. Students then consider the properties of the halogens and carry out a task where they predict the properties of astatine using line graphs that they draw then present their work. A student friendly assessment grid is provided for students to peer mark their work. Please rate this resource and leave feedback.

This is a lesson for the new 2016 AQA GCSE specification that forms part of the atomic structure scheme of work. Included in the lesson are links to RSC practical advice. Answers to the worksheet are provided. Please rate this resource and leave feedback.

This lesson forms part of the chemistry GCSE atomic structure scheme of work for the new 2016 AQA specification. The starter is a fun kinsthetic activity where students put element cards into groups. These cards are available to buy from Royal Society for Chemistry. A link is included on the slide. Alternatively students could make a pack of element fact cards for homework and bring them to lesson for the starter activity. Students are then introduced to Dobereiner and Newlands. They watch a 3 minute YouTube video about Mendeleev and answer the questions provided. Students then consider that Mendeleev missed group 8/0 elements and swapped iodine / tellurium so that the group 7 elements are all non-metals (i.e. why de not always put elements in order of increasing atomic weight). There is an activity where students consider the good and bad things about each scientists methodology and write an explanation for why we now use Mendeleevs table. Finally there is an exam question plenary. Please rate this resource and leave feedback.

This forms part of the chemistry scheme of work for the new 2016 specification. The homework task is set in advance so that students can mark their homework as a starter activity. There is an optional starter activity to show students as they walk in which is a recap of what atoms and elements are. The video is the worlds smallest video created by IBM. It shows atoms of an element moving around - the key point being that atoms of a particular element are identical. The first activity looks at understanding how to work out the number of subatomic particles. Students are then introduced to the concept of isotopes. The next activity looks at electron shells the more able students are introduced to ions. The lesson finishes with an exam question plenary. Please rate this resource and leave feedback.

This lesson is the third in the atomic structure scheme of work for the 2016 AQA specification. The two previous lessons are on elements, compounds and mixtures and balancing equations. The theme of the lesson is separating cannabis chemicals in order to extract TetraHydroCannabinol (THC). This is part of a group of chemicals called 'cannabinoids' and is used as an oral spray called Sativex that treats multiple sclerosis. The lesson starts with students listing 3 reasons for and 3 reasons against legalising cannabis. There is a YouTube video showing a 3 minute BBC News report that is embedded. The link is included in the PowerPoint. Students then use the separating mixtures trump cards to state what method they would use for each stage of extracting THC. They carry out a RSC practical to extract 'THC' (it is in fact a combination of chemicals) using a pestle and mortar and the solvent propanone. Though not included in the RSC practical they could filter the solvent to remove any solids. They then use paper chromatography to see whether their sample has a pure chemical. If the chemical is pure there will be a single spot visible on the chromatogram. Students could then dry their chromatograms and calculate the Rf value of their spot. Finally a higher level question is included at the end where students consider the effect of using different solvents. Please rate these resources and leave feedback.

This covers balancing equations skills for GCSE. This is lesson 2 in the atomic structure scheme of work for the AQA 2016 specification. The lesson starts with a recap of elements, compounds and formulae (lesson 1 in the AQA atomic structure scheme of work). The lesson then has a demo of the sodium and chlorine reaction. Students are then introduced to the rules for balancing equations. They can balance equations using the particle diagrams method that is included in the main lesson. Alternatively students could use the column method or use boiled sweets that are included separately. The challenge is to balance equations that use brackets and to balance half equations. Please rate this resource and leave feedback.

This covers naming of compounds (e.g. iron chloride) and some challenge questions such as where the heavier elements are made (supernova). Please rate this resource and leave feedback.

This is is a lesson for GCSE chemistry that matches the AQA new 2016 specification section 4.1 - atomic structure and the periodic table. The lesson begins with a fun film characters starter. There is then a discussion on how elements are made in supernovae. Students then consider rules for naming compounds and how to write formulae. They then then write the formulae for 12 substances. The challenge is to write empirical formulae. The lesson concludes with a consideration of how some of the chemicals are harmful to fish such as Nemo. Titanium dioxide in suntan cream causes water and oxygen in seawater to react to form hydrogen peroxide that is toixc to fish. Answers are included. Please rate this resource and leave feedback.