Powerpoint lecture covering the following in a modern, concise format: Specification Point 2.15 - Know and use the relationship between charge, current and time. Specification Point 2.16 - Know that electric current in solid metallic conductors is a flow of negatively charged electrons. Specification Point 2.17 - Understand why current is conserved at a junction in a circuit. Specification Point 2.18 - Know that the voltage across two components connected in parallel is the same. Specification Point 2.19 - Calculate the currents, voltages and resistances of two resistive components connected in a series circuit. Specification Point 2.20 - Know that voltage is the energy transferred per unit charge passed and that the volt is a joule per coulomb. Specification Point 2.21 - Know and use the relationship between energy transferred, charge and voltage. Complete set of Chapter 2 Lectures are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 1.30P - Know and use the relationship between the moment of a force and its perpendicular distance from the pivot. Specification Point 1.31P - Know that the weight of a body acts through its centre of gravity. Specification Point 1.32P - Use the principle of moments for a simple system of parallel forces acting in one plane. Specification Point 1.33P - Understand how the upward forces on a light beam, supported at its ends, vary with the position of a heavy object placed on the beam. Complete set of Chapter 1 Lessons are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 2.4 - Know and use the relationship between power, current and voltage and apply the relationship to the selection of appropriate fuses. Specification Point 2.5 - Use the relationship between energy transferred, current, voltage and time. Specification Point 2.6 - Know the difference between mains electricity being alternating current (A.C.) and direct current (D.C.) being supplied by a cell or battery. Complete set of Chapter 2 Lessons are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 2.1 - Use the following units: ampere, coulomb, joule , ohm, second, volt and watt. Specification Point 2.2 - Understand how the use of insulation, double insulation, earthing, fuses and circuit breakers protects the device or user in a range of domestic appliances. Specification Point 2.3 - Understand why a current in a resistor results in the electrical transfer of energy and an increase in temperature, and how this can be used in a variety of domestic contexts. Specification Point 2.14 - Know that current is the rate of flow of charge. Complete set of Chapter 2 Lessons are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 2.22P - Identify common materials which are electrical conductors or insulators, including metals and plastics. Specification Point 2.23P - Practical: investigate how insulating materials can be charged by friction. Specification Point 2.24P - Explain how positive and negative electrostatic charges are produced on materials by the loss and gain of electrons. Specification Point 2.25P - Know that there are forces of attraction between unlike charges and forces of repulsion between like charges. Specification Point 2.26P - Explain electrostatic phenomena in terms of the movement of electrons. Specification Point 2.27P - Explain the potential dangers of electrostatic charges. Specification Point 2.28P - Explain some uses of electrostatic charges. Complete set of Chapter 2 Lectures are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 2.15 - Know and use the relationship between charge, current and time. Specification Point 2.16 - Know that electric current in solid metallic conductors is a flow of negatively charged electrons. Specification Point 2.17 - Understand why current is conserved at a junction in a circuit. Specification Point 2.18 - Know that the voltage across two components connected in parallel is the same. Specification Point 2.19 - Calculate the currents, voltages and resistances of two resistive components connected in a series circuit. Specification Point 2.20 - Know that voltage is the energy transferred per unit charge passed and that the volt is a joule per coulomb. Specification Point 2.21 - Know and use the relationship between energy transferred, charge and voltage. Complete set of Chapter 2 Lessons are available.

Companion PDF worksheet for Edexcel IGCSE Physics Lecture 13 - Static Electricity. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 2.22P - Identify common materials which are electrical conductors or insulators, including metals and plastics. Specification Point 2.23P - Practical: investigate how insulating materials can be charged by friction. Specification Point 2.24P - Explain how positive and negative electrostatic charges are produced on materials by the loss and gain of electrons. Specification Point 2.25P - Know that there are forces of attraction between unlike charges and forces of repulsion between like charges. Specification Point 2.26P - Explain electrostatic phenomena in terms of the movement of electrons. Specification Point 2.27P - Explain the potential dangers of electrostatic charges. Specification Point 2.28P - Explain some uses of electrostatic charges. Complete set of Chapter 2 Worksheets are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 2.22P - Identify common materials which are electrical conductors or insulators, including metals and plastics. Specification Point 2.23P - Practical: investigate how insulating materials can be charged by friction. Specification Point 2.24P - Explain how positive and negative electrostatic charges are produced on materials by the loss and gain of electrons. Specification Point 2.25P - Know that there are forces of attraction between unlike charges and forces of repulsion between like charges. Specification Point 2.26P - Explain electrostatic phenomena in terms of the movement of electrons. Specification Point 2.27P - Explain the potential dangers of electrostatic charges. Specification Point 2.28P - Explain some uses of electrostatic charges. Complete set of Chapter 2 Lessons are available.

Companion PDF worksheet for Edexcel IGCSE Physics Lecture 14 - Waves. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 3.1 - Use the following units: degree (°), hertz (Hz), metre (m), metre/second (m/s) and second (s). Specification Point 3.2 - Explain the difference between longitudinal and transverse waves. Specification Point 3.3 - Know the definitions of amplitude, wavefront, frequency, wavelength and period of a waves. Specification Point 3.4 - Know that waves transfer energy and information without transferring matter. Specification Point 3.5 - Know and use the relationship between the speed, frequency and wavelength of a wave. Specification Point 3.6 - Use the relationship between frequency and time period. Complete set of Chapter 3 Worksheets are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 3.1 - Use the following units: degree (°), hertz (Hz), metre (m), metre/second (m/s) and second (s). Specification Point 3.2 - Explain the difference between longitudinal and transverse waves. Specification Point 3.3 - Know the definitions of amplitude, wavefront, frequency, wavelength and period of a waves. Specification Point 3.4 - Know that waves transfer energy and information without transferring matter. Specification Point 3.5 - Know and use the relationship between the speed, frequency and wavelength of a wave. Specification Point 3.6 - Use the relationship between frequency and time period. Complete set of Chapter 3 Lessons are available.

Companion PDF worksheet for Edexcel IGCSE Physics Lecture 19 - Thermal Energy. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 4.6 - Describe how thermal energy transfer may take place by conduction, convection and radiation. Specification Point 4.7 - Explain the role of convection in everyday phenomena. Specification Point 4.8 - Explain how emission and absorption of radiation are related to surface and temperature. Specification Point 4.9 - Practical: investigate thermal energy transfer by conduction, convection and radiation. Specification Point 4.10 - Explain ways of reducing unwanted energy transfer, such as insulation. Complete set of Chapter 4 Worksheets are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 4.6 - Describe how thermal energy transfer may take place by conduction, convection and radiation. Specification Point 4.7 - Explain the role of convection in everyday phenomena. Specification Point 4.8 - Explain how emission and absorption of radiation are related to surface and temperature. Specification Point 4.9 - Practical: investigate thermal energy transfer by conduction, convection and radiation. Specification Point 4.10 - Explain ways of reducing unwanted energy transfer, such as insulation. Complete set of Chapter 4 Lectures are available.

Companion PDF worksheet for Edexcel IGCSE Physics Lecture 23 - Changes of State. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 5.8P - Explain why heating a system will change the energy stored within the system and raise its temperature or produce changes of state. Specification Point 5.9P - Describe the changes that occur when a solid melts to form a liquid, and when a liquid evaporates or boils to form a gas. Specification Point 5.10P - Describe the arrangement and motion of particles in solids, liquids and gases. Specification Point 5.11P - Practical: obtain a temperature–time graph to show the constant temperature during a change of state. Specification Point 5.12P - Know that specific heat capacity is the energy required to change the temperature of an object by one degree celsius per kg of mass. Specification Point 5.13P - Use an equation to derive the change in thermal energy in a system. Specification Point 5.14P - Practical: investigate the specific heat capacity of materials including water and some solids. Complete set of Chapter 5 Worksheets are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 5.8P - Explain why heating a system will change the energy stored within the system and raise its temperature or produce changes of state. Specification Point 5.9P - Describe the changes that occur when a solid melts to form a liquid, and when a liquid evaporates or boils to form a gas. Specification Point 5.10P - Describe the arrangement and motion of particles in solids, liquids and gases. Specification Point 5.11P - Practical: obtain a temperature–time graph to show the constant temperature during a change of state. Specification Point 5.12P - Know that specific heat capacity is the energy required to change the temperature of an object by one degree celsius per kg of mass. Specification Point 5.13P - Use an equation to derive the change in thermal energy in a system. Specification Point 5.14P - Practical: investigate the specific heat capacity of materials including water and some solids. Complete set of Chapter 5 Lessons are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 5.8P - Explain why heating a system will change the energy stored within the system and raise its temperature or produce changes of state. Specification Point 5.9P - Describe the changes that occur when a solid melts to form a liquid, and when a liquid evaporates or boils to form a gas. Specification Point 5.10P - Describe the arrangement and motion of particles in solids, liquids and gases. Specification Point 5.11P - Practical: obtain a temperature–time graph to show the constant temperature during a change of state. Specification Point 5.12P - Know that specific heat capacity is the energy required to change the temperature of an object by one degree celsius per kg of mass. Specification Point 5.13P - Use an equation to derive the change in thermal energy in a system. Specification Point 5.14P - Practical: investigate the specific heat capacity of materials including water and some solids. Complete set of Chapter 5 Lectures are available.

Companion PDF worksheet for Edexcel IGCSE Physics Lecture 22 - Density and Pressure. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Specification Point 5.3 - Know and use the relationship between density, mass and volume. Specification Point 5.4 - Practical: investigate density using direct measurements of mass and volume. Specification Point 5.5 - Know and use the relationship between pressure, force and area. Specification Point 5.6 - Understand how the pressure at a point in a gas or liquid at rest acts equally in all directions. Specification Point 5.7 - Know and use the relationship for pressure difference. Complete set of Chapter 5 Worksheets are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 5.3 - Know and use the relationship between density, mass and volume. Specification Point 5.4 - Practical: investigate density using direct measurements of mass and volume. Specification Point 5.5 - Know and use the relationship between pressure, force and area. Specification Point 5.6 - Understand how the pressure at a point in a gas or liquid at rest acts equally in all directions. Specification Point 5.7 - Know and use the relationship for pressure difference. Complete set of Chapter 5 Lessons are available.

Powerpoint lecture covering the following in a modern, concise format: Specification Point 5.3 - Know and use the relationship between density, mass and volume. Specification Point 5.4 - Practical: investigate density using direct measurements of mass and volume. Specification Point 5.5 - Know and use the relationship between pressure, force and area. Specification Point 5.6 - Understand how the pressure at a point in a gas or liquid at rest acts equally in all directions. Specification Point 5.7 - Know and use the relationship for pressure difference. Complete set of Chapter 5 Lectures are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 4.6 - Describe how thermal energy transfer may take place by conduction, convection and radiation. Specification Point 4.7 - Explain the role of convection in everyday phenomena. Specification Point 4.8 - Explain how emission and absorption of radiation are related to surface and temperature. Specification Point 4.9 - Practical: investigate thermal energy transfer by conduction, convection and radiation. Specification Point 4.10 - Explain ways of reducing unwanted energy transfer, such as insulation. Complete set of Chapter 4 Lessons are available.

Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format: Specification Point 4.11 - Know and use the relationship between work done, force and distance moved in the direction of the force. Specification Point 4.12 - Know that work done is equal to energy transferred. Specification Point 4.13 - Know and use the relationship between gravitational potential energy, mass, gravitational field strength and height. Specification Point 4.14 - Know and use the relationship between kinetic energy, mass and speed. Specification Point 4.15 - Understand how conservation of energy produces a link between gravitational potential energy, kinetic energy and work. Specification Point 4.16 - Describe power as the rate of transfer of energy or the rate of doing work. Specification Point 4.17 - Use the relationship between power, work done and time taken. Complete set of Chapter 4 Lessons are available.