A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A lot of time and effort has gone into the design of this revision resource as it covers the very important Atoms, elements and compounds topic (C3) of the CIE IGCSE Combined Specification which will be examined in June and November 2020 and 2021. This topic tends to contribute a high volume of the questions in the examination papers as it contains fundamental understanding. The resource contains a detailed and engaging PowerPoint (87 slides) and associated worksheets, which have been differentiated to allow differing abilities the chance to complete the task. The range of activities that include exam questions, quick tasks and quiz competitions aim to cover as much of the content as possible but the following topics have received particular attention:
Metals vs non-metals
Using the proton and nucleon number to calculate the number of sub-atomic particles
Atoms vs ions
Drawing dot and cross diagrams for ionic compounds
The structure of an ionic compound and the relation to its properties
Drawing dot and cross diagrams for simple molecules
Understanding of the terms solution, solvent, solute and soluble
Throughout the lesson, links have been made to other modules (e.g. Electricity and chemistry) so that students can see how they will be expected to make these connections. The detail of this lesson means that it can be used a number of times and is ideal for revision during the learning of C3, at the end of the topic or in the lead up to mocks or terminal exams.
An engaging lesson presentation (72 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C6 (Global Challenges) of the OCR Gateway A GCSE Combined Science specification.
The topics that are tested within the lesson include:
Extracting metals
Extracting iron
Extracting aluminium
Cracking oil fractions
Water for drinking
Students will be engaged through the numerous activities including quiz rounds like “EXTRACT the non-FACT” and “Say what you SEE” whilst crucially being able to recognise those areas which need further attention
This revision lesson has been designed to challenge the students on their use of a range of mathematical skills that could be assessed on the Edexcel GCSE Combined Science papers. The mathematical element of the Edexcel GCSE Combined Science course has increased significantly since the specification change and therefore success in those questions which involve the use of maths can prove to be the difference between one grade and another or possibly even more.
The engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with displayed mark schemes and explanations so that students can assess their progress. Other activities include differentiated tasks, class discussion points and quick quiz competitions such as “It doesn’t HURT to CONVERT”, “YOU DO THE MATH” and “FILL THE VOID”.
The following mathematical skills (in a scientific context) are covered in this lesson:
The use of Avogadro’s constant
Rearranging the formula of an equation
Calculating the amount in moles using mass and relative formula mass
Calculating the relative formula mass for formulae with brackets
Calculating the relative atomic mass using the mass and abundance of isotopes
Using the Periodic Table to calculate the number of sub-atomic particles in atoms
Changes to electrons in ions
Balancing chemical symbol equations
Empirical formula
Converting between units
Calculating concentration in grams per dm cubed and volumes of solutions
Calculating size using the magnification equation
Using the mean to estimate the population of a sessile species
Calculating percentages to prove the importance of biodiversity
Calculating percentage change
The BMI equation
Calculating the acceleration from a velocity-time graph
Recalling and applying the Physics equations
Understanding prefixes that determine size
Leaving answers to significant figures and using standard form
Helpful hints and step-by-step guides are used throughout the lesson to support the students and some of the worksheets are differentiated two ways to provide extra assistance.
Due to the detail of this lesson, it is estimated that it will take in excess of 3 hours of GCSE teaching time to cover the tasks and for this reason it can be used over a number of lessons as well as during different times of the year for revision.
This revision resource contains an engaging PowerPoint (44 slides) and associated worksheets, all of which have been differentiated two ways to allow students of differing abilities to access the work. The range of activities cover the content of Topic C11 (Air and water) of the CIE IGCSE Combined Science specification, for examination in June and November 2020 and 2021. The aim was to cover as much of the content as possible but the following topics have received particular attention:
The composition of clean air
Changes in atmospheric carbon dioxide levels
The formation of carbon dioxide
Common air pollutants and their effects on health and structures
The treatment of water to make it safe
The chemical tests for water
A number of quiz competitions are included in the lesson such as “POLLUTE the air…with the answer” where students compete to be the first to identify a common pollutant from the clues. These competitions act to engage them whilst the exam questions and quick tasks will enable them to assess their understanding of the content.
This lesson explains the law of conservation of mass and applies this law to a closed system and a non-enclosed system. The PowerPoint and accompanying resources have been designed to cover point 1.48 of the Edexcel GCSE Chemistry specification and also covers that point in the Chemistry section of the Combined Science course.
The lesson begins by introducing the law of the conservation of mass. Students will learn that they can expect questions which challenge them to prove that mass is conserved through the use of the relative formula mass. Therefore, the next section of the lesson focuses on the skills associated with this calculation and looks at more different formulae such as those with brackets. Students are given an opportunity to check their skills before trying to prove mass is conserved in three chemical reactions. All questions have displayed mark schemes so that students can assess their understanding. The rest of the lesson looks at instances of when the mass of the reactants does not equal the mass of the products. A practical method for the decomposition of copper carbonate is provided if the teacher wants to use it, so that students can collect results which show this difference in mass. Discussions are encouraged in order to get students to offer explanations as to why the mass of the products is lower. Once the gas has been identified, students are further challenged to consider apparatus that could be used to collect and record the results to again prove conservation
This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the sub-topics found within Topic C4 (Extracting metals and equilibria) of the Edexcel GCSE Combined Science specification.
The sub-topics and specification points that are tested within the lesson include:
Redox reactions
The extraction of metals
Extracting metals by heating with carbon and by electrolysis
Life cycle assessment
Reversible reactions
The formation of ammonia as a reversible reaction
The conditions for the Haber process
Predicting how the position of a dynamic equilibrium is affected by changes in pressure and temperature
Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual assessment
This REVISION resource has been designed to motivate and engage students whilst they are challenged on their knowledge of the content in topics C1-C5 of the AQA Trilogy GCSE Combined Science specification which can be assessed on PAPER 3. This is fully-resourced and contains a detailed PowerPoint (170 slides) and accompanying worksheets, some of which have been differentiated.
The resource was written with the aim of covering as many C1-C5 sub-topics as possible, but the following ones have received particular focus:
The chemical properties of the Group 1, 7 and 0 elements
The structure of atoms and ions
The properties of ionic compounds
Drawing dot and cross diagrams to represent ionic compounds
Extracting metals using carbon
REDOX reactions
Electrolysis of molten salts and solutions
Neutralisation reactions
Writing balanced chemical symbol equations
Simple and giant covalent structures
Diamond and graphite
Moles and Avogadro’s constant
The organisation of the Periodic Table
Due to the extensiveness of this resource, it is likely to be used over the course of a number of lessons with a particular class and this allows the teacher to focus in on any sub-topics which are identified as needing more time.
This detailed revision lesson challenges the students on their understanding of the reactions of acids with metals to produce salts and hydrogen. The PowerPoint and accompanying resources focus on the details of point 4.2.1 in the AQA GCSE chemistry and combined specifications, and time is spent reminding the students that these reactions are redox reactions.
The students are given the general word equation for acids reacting with metals and are challenged to recall how to name the salts according to the metal and acid involved in the reaction. They are reminded that redox reactions involve the loss and gain of electrons and are challenged to identify the substances which are reduced or oxidised in specific examples.
In addition to the reactions of acids with metals, this revision lesson also challenges them to write chemical formulae, balance symbol equations, and to identify the tests for gases.
This lesson describes the relationship between the structure and function of the giant covalent substances, graphite and diamond. The PowerPoint and accompanying resource have been designed to cover points 1.35, 1.36 and 1.37 of the Edexcel GCSE Chemistry specification also covers those same points in the Chemistry section of the Combined Science course
As shown in the picture, the lesson begins with a newspaper story about two prisoners who escaped from Pentonville prison by using a diamond-tipped drill and this immediately introduces the use of this allotrope of carbon in cutting tools. There is a clear focus on the link between the structure, bonding and respective uses. Time is taken to focus on the comparison between graphite and diamond in terms of their ability to conduct electricity. A step by step answer is used to explain why diamond cannot conduct electricity so that students can use this when forming their answer for graphite.
This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 6 (Groups in the Periodic Table) of the Edexcel GCSE Chemistry specification.
The specification points that are covered in this revision lesson include:
Explain why some elements can be classified as alkali metals (group 1), halogens (group 7) or noble gases (group 0), based on their position in the periodic table
Describe the pattern in reactivity of the alkali metals, lithium, sodium and potassium, with water; and use this pattern to predict the reactivity of other alkali metals
Explain this pattern in reactivity in terms of electronic configurations
Recall the colours and physical states of chlorine, bromine and iodine at room temperature
Describe the pattern in the physical properties of the halogens, chlorine, bromine and iodine, and use this pattern to predict the physical properties of other halogens
Describe the reactions of the halogens, chlorine, bromine and iodine, with metals to form metal halides, and use this pattern to predict the reactions of other halogens
Describe the relative reactivity of the halogens chlorine, bromine and iodine, as shown by their displacement reactions with halide ions in aqueous solution, and use this pattern to predict the reactions of astatine
Explain the relative reactivity of the halogens in terms of electronic configurations
Explain why the noble gases are chemically inert, compared with the other elements, in terms of their electronic configurations
The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Make sure you check every passage PERIODICALLY” where they have to scan summary passages about the table and decide if it is 100% correct whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams
This fully-resourced lesson will prepare students for the range of mathematical-based questions that they may face on Paper 2 & 4. It is specificallly designed for students who have studied the Extended subject content (Core & Supplement) as detailed on the CIE IGCSE Chemistry specification. The lesson contains a wide range of activities which includes 8 quiz competition rounds spread across the duration of the lesson to maintain engagement whilst the students assess their understanding.
The mathematical skills covered in this lesson include:
Calculating the number of sub-atomic particles in atoms and ions
Writing chemical formulae for ionic compounds
Identifying isotopes
Using Avogadro’s constant to calculate the number of particles
Calculating the relative formula mass
Calculating amount in moles using the mass and the relative formula mass
Balancing chemical symbol equations
Calculating reacting masses
Gas calculations using molar volume
Calculating concentration of solutions
Titration calculations
Deducing the empirical formula
Calculating energy changes in reactions
Most of the resources have been differentiated two ways to allow students of differing abilities to access the work whilst still being challenged. In addition, step by step guides are used to demonstrate how to carry out some of the more difficult calculations such as the harder mole calculations and calculating masses in reactions.
Due to the extensiveness of this lesson, it is estimated that it will take in excess of 3 teaching hours to complete all of the tasks and questions
An engaging lesson presentation (73 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C5 of the OCR Gateway A GCSE Chemistry specification.
The topics that are tested within the lesson include:
Percentage yield
Concentration of solution
Titrations
Titration calculations
Gas calculations
Rate of reaction
Factors affecting the rate of reaction
Reversible reactions
Equilibrium position
Students will be engaged through the numerous activities including quiz rounds like “Under PRESSURE” and “Number CRAZY” whilst crucially being able to recognise those areas which need further attention
This is an engaging revision lesson which uses a range of exam questions, understanding checks, quiz tasks and quiz competitions to enable students to assess their understanding of the content within topic 9 (The Periodic Table) of the Cambridge IGCSE Chemistry (0620) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers.
The specification points that are covered in this revision lesson include:
CORE
Describe the Periodic Table as a method of classifying elements and its use to predict properties of elements
Describe the change from metallic to nonmetallic character across a period
Describe lithium, sodium and potassium in Group I as a collection of relatively soft metals showing a trend in melting point, density and reaction with water
Describe the halogens, chlorine, bromine and iodine in Group VII, as a collection of diatomic non-metals showing a trend in colour and density and state their reaction with other halide ions
Predict the properties of other elements in Group VII, given data where appropriate
Describe the transition elements as a collection of metals having high densities, high melting points and forming coloured compounds, and which, as elements and compounds, often act as catalysts
Describe the noble gases, in Group VIII or 0, as being unreactive, monoatomic gases and explain this in terms of electronic structure
State the uses of the noble gases in providing an inert atmosphere, i.e. argon in lamps, helium for filling balloons
SUPPLEMENT
Describe and explain the relationship between Group number, number of outer shell electrons and metallic/non-metallic character
Identify trends in Groups, given information about the elements concerned
Know that transition elements have variable oxidation states
The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Make sure you check every passage PERIODICALLY” where they have to scan summary passages about the table and decide if it is 100% correct whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams
This lesson explains how the complete combustion of hydrocarbons produces carbon dioxide and water and explains how write equations to represent these reactions. The PowerPoint and accompanying resources are part of the second lesson in a series of 2 which have been designed to cover the detail in point 7.1.3 of the AQA GCSE Chemistry & Combined Science specifications.
As shown in the cover picture, the lesson starts with a challenge where the students have to recognise the key term combustion from its suffix and a brief definition. Moving forwards, students will discover that the combustion of hydrocarbons releases energy and during this reaction, the carbon and hydrogen are oxidised. Time is taken to emphasise that sufficient oxygen needs to be present for complete combustion to occur and that if the supply is plentiful then carbon dioxide and water will be produced. The main part of the lesson uses a step by step guide to show students how to write word equations and balanced symbol equations for these reactions, before they are challenged to apply their understanding to write their own. All of the exam questions have mark schemes embedded into the PowerPoint to allow the students to self-assess. The final part of the lesson uses an internet article about carbon monoxide poisoning to introduce that this toxic gas can be produced when oxygen is insufficient.
This lesson explains how ionic bonds are formed to form ions and describes the structure of an ionic compound. The engaging lesson PowerPoint and accompanying resources have been designed to cover points 1.21 and 1.27 of the Edexcel GCSE Chemistry specification and this also covers those points on the Combined Science specification.
The lesson begins by introducing the name of the type of bond, but does not go into any more detail at this stage. This is because the lesson is designed to allow the students to discover that in order for both of the atoms involved to get a full outer shell, electrons have to be transferred from one to the other. Over the course of the lesson, students will recognise that it is the metal that loses the electrons and becomes a positive ion whilst the non-metal gains the electrons and becomes a negative ion. There are lots of discussion and discovery points like this written into the lesson so that students can take ownership for their learning. Students are guided through drawing dot and cross diagrams to represent these compounds and as a result links are made to the topics of naming compounds, writing chemical formulae, forming ions and electron configurations. There are a number of quick competitions in the lesson which introduce new terms to the students. One such competition introduces the term lattice and the lesson builds from here to understand why ionic compounds have high melting and boiling points. Moving forwards, students will also learn that solid ionic compounds cannot conduct electricity whilst those in molten form or in an aqueous solution are able to. The final task of the lesson challenges the students to bring all of the information together they have seen to draw a dot and cross diagram for aluminium oxide, explain how it was formed and then explain how aluminium is extracted from this compound by electrolysis. This final task has been differentiated so that students who need extra assistance can still access the learning.
This lesson has been written for GCSE aged students but could be used with higher ability younger students who are pushing on with the elements, compounds and mixtures topic
This lesson describes the meaning of the atomic and mass number and explains how to calculate the number of protons, neutrons and electrons. The PowerPoint has been designed to cover the detail of points 1.4, 1.7, 1.8 and 1.10 of the Edexcel GCSE Chemistry and Combined Science specifications.
The lesson begins by challenging the students to put the chemical symbols for astatine, oxygen, iodine and carbon together to form the word atomic. Time is taken to explain the meaning of the atomic number and to emphasise how the number of protons in the nucleus is unique to atoms of that element. The students will learn that as the number of electrons is always the same as the number of protons in an atom, the atomic number can be used to calculate the numbers of both of these particles. Moving forwards, the mass number is considered and having been given the number of neutrons in a lithium atom, the students are challenged to articulate how the mass number and atomic number were used in this calculation. A series of worked examples are done as a class before the students are given the opportunity to challenge their understanding.
This is a fully-resourced lesson which uses exam-style questions, engaging quiz competitions, quick tasks and discussion points to challenge students on their understanding of topics C1 & C6 - C8, that will assessed on PAPER 4. It has been specifically designed for students on the Edexcel GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the key ideas are known and understood.
The lesson has been written to cover as many specification points as possible but the following sub-topics have been given particular attention:
Hydrocarbons
The homologous series of alkanes
Empirical formula
Covalent dot and cross diagrams
Fractional distillation of crude oil
The properties of the different fractions
The complete combustion of a hydrocarbon
Changes in the carbon dioxide levels in the atmosphere
Deforestation
Changes in the Earth’s atmosphere
Polluting gases
The formation of acid rain
Detecting oxygen and chlorine
The properties of the halogens
Metals vs non-metals
The reaction of alkali metals with water
Explaining the pattern of reactivity of the alkali metals
The collision theory
Endothermic and exothermic reactions
In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been written into the lesson to walk students through some of the more difficult concepts such as the changes in the Earth’s atmosphere and explaining the reactivity of the alkali metals in terms of electronic configurations.
Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3 teaching hours to complete the tasks and therefore this can be used at different points throughout the duration of the course as well as acting as a final revision before the PAPER 4 exam.
This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within Topic C3 (Physical chemistry) of the Edexcel iGCSE Chemistry specification which has its’ first assessment in 2019.
The topics that are tested within the lesson include:
Energetics
Rates of reaction
Reversible reactions and equilibria
Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual assessment.
This lesson describes the size and mass of atoms and describes the relative mass and electrical charge of the subatomic particles. The PowerPoint and accompanying resources are part of the first lesson in a series of 3 that has been designed to cover specification points 1.1.4 - 1.1.6 of the AQA GCSE Chemistry & Combined Science specifications.
The lesson begins by introducing giga as a prefix of size and this leads into a task where the students have to order the other prefixes from largest to smallest. This introduces the nanometre and students will learn the size of the radius of an atom is 0.1nm. Time is taken to compare this size against that of a football and a human egg cell to try to put this atom radius into context. Moving forwards, the term “subatomic particles” is introduced and the students are challenged to recall the names of the three types along with their location within the atom from their lessons on the development of the atomic model earlier in topic 1. They are told that most of atom’s mass is in the nucleus and therefore can work out the protons and neutrons have much higher relative masses than electrons. They will also learn the relative electrical charges of the particles and are challenged to use this to state the overall charge of an atom and the nucleus.
There is a considerable amount of Maths written into this lesson including the use of standard form and conversion between units and step by step guides are used to support the students with this work
This lesson revisits the topic of random and systematic errors and also challenges students on other scientific skills such as identifying variables. Students tend to find this topic confusing, so the PowerPoint and accompanying resources have been designed to support them to identify whether an error is random or systematic and then to understand what to do next.
The lesson guides the students through a series of real life examples and shows them how to spot each type of error. There is a considerable mathematical element to this lesson, including the calculation of means or missing values in a table.
The lesson concludes with a series of exam-style questions where the students have to apply their understanding of identifying errors, variables and calculating means.