This fully-resourced revision lesson has been designed to motivate and engage the students whilst they assess their understanding of the content detailed in topics 12 & 13 (Magnetism and the motor effect and electromagnetic induction) of the Pearson Edexcel GCSE Physics specification. These two topics tend to be poorly understood so time has been taken to plan activities that challenge the key details of the specification and provide clear explanations so students can progress. The PowerPoint and accompanying resources were written to cover as much of the content in both topics as possible, but the following points have received particular attention: Attraction and repulsion between unlike and like poles respectively Electromagnetic induction The application of Fleming’s left-hand rule Application of the equation involving magnetic flux density Microphones and loudspeakers and the opposite conversions of a changing current to sound waves The ability of transformers to change the size of alternating voltage The advantage of power transmission in high voltage cables The application of the transformer equations involving potential difference and turns and for transformers with 100% efficiency Due to the heavy mathematical element of the specification, the required skills are tested throughout the lesson and guidance is given to allow differing abilities to access the work

This fully-resourced revision lesson challenges the students on their knowledge of the content which is detailed in topic 14 (Particle model) of the Pearson Edexcel GCSE Physics specification. The wide range of activities, which include exam-style questions with clear explanations, will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the module as possible but the following specification points have been given particular attention: Recall and use the equation to calculate density Explain the differences in density between the different states of matter Describe that mass is conserved during physical changes Explain how heating a system will change the temperature or change a state Define the terms specific heat capacity and specific latent heat and describe the differences between them Use the equations involving specific heat capacity and specific latent heat Explain the qualitative relationship between Kelvin temperature and pressure of a gas Convert between the Kelvin and degrees Celsius scales Explain the effect of changing the volume on the pressure of a fixed mass of gas at a constant temperature Explain why doing work on a gas can increase the temperature Most of the resources are differentiated to allow students of differing abilities to access the work and be challenged and the PowerPoint guides the students through the range of mathematical skills which are tested in this topic

This fully-resourced revision lesson has been designed to engage and motivate the students whilst they assess their understanding of the content in topic 7 (Astronomy) of the Pearson Edexcel GCSE Physics specification. The lesson has been written to include as many of the specification points as possible but the following have been given particular attention: Explain how the value of g differs between the Earth’s surface and the surface of other bodies in space Recall the bodies that are found in our Solar system Recall the names and order of the eight planets Describe evidence supporting the Big Bang theory Describe that there will be a change in the frequency and wavelength of a wave if the source of the wave is moving in relation to the observer Describe why the red-shift of galaxies provides evidence for the expansion of the Universe Describe the evolution of stars of similar mass to our Sun Describe the evolution of stars with a larger mass than our Sun This topic contains a number of principles or theories which can be poorly understood by students so extra time has been taken to guide them in the formation of descriptions and explanations.

This fully-resourced revision lesson challenges the students on their knowledge of the content detailed in topic 1 (Matter) of the OCR GCSE Physics specification. The wide range of activities, which include exam questions with clear explanations, will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the module as possible but the following specification points have been given particular attention: Recall and apply the equation to calculate density Describe how and why the atomic model has changed over time Describe the atom and recall the typical size Explain the difference in density between different states of matter Describe how mass is conserved when physical changes occur Describe how physical changes differ from chemical changes Define the term specific heat capacity and distinguish between that and specific latent heat Applying the equation to calculate the specific heat capacity Understanding that temperature does not change during changes of state Applying the equation to calculate the specific latent heat Explaining the qualitative relationship between the temperature of a gas and its pressure Applying the equation that links pressure, volume and a constant Explain how doing work on a gas can increase its temperature Explain why pressure in a liquid varies with depth Most of the resources are differentiated to allow students of differing abilities to access the work and be challenged and the PowerPoint guides the students through the range of mathematical skills which are tested in this module

This fully-resourced revision lesson challenges the students on their knowledge of the content detailed in topic 3 (Particle model of matter) of the AQA GCSE Physics specification. The wide range of activities which include exam questions with clear explanations will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the topic as possible but the following specification points have been given particular attention: Recall and apply the equation to calculate density Explaining differences in density between states of matter Internal energy and the result of heating the particles in a system Applying the equation to calculate the specific heat capacity Understanding that temperature does not change during changes of state Applying the equation to calculate the specific latent heat Explaining the qualitative relationship between the temperature of a gas and its pressure Applying the equation that links pressure, volume and a constant The engaging PowerPoint guides students on the use of key mathematical skills to aid success with the various calculations

This detailed and engaging lesson has been written to challenge the students on their recall and application of the 30 equations which they have to know for the CIE IGCSE Physics exams. The lesson is designed to not only check that they know these equations but also on their ability to rearrange formulae when required and to convert between units. The main task of the lesson consists of 15 exam-style questions which challenge 17 of these recall equations and then an engaging quiz competition and class discussions are used to identify the other 13. Students are guided throughout the lesson in the use of the mathematical skills and are shown examples to aid their progress. The detail of this lesson means that it can be used at numerous times throughout the duration of the IGCSE course to check on their progress with the equations. This lesson has been designed to tie in with the other 5 uploaded revision lessons which cover the content of the 5 topics on the specification

This detailed and engaging lesson has been written to challenge the students on their recall and application of the 21 equations which they have to know for the Pearson Edexcel IGCSE Physics exams. The lesson is designed to not only check that they know these equations but also on their ability to rearrange formulae when required and to convert between units. The main task of the lesson consists of 12 exam-style questions which challenge 14 of these recall equations and then an engaging quiz competition and class discussions are used to identify the other 7. Students are guided throughout the lesson in the use of the mathematical skills and are shown examples to aid their progress. This lesson has been designed to tie in with the other 8 uploaded revision lessons which cover the content of the 8 topics on the specification.

This is a fully-resourced revision lesson that has been written to include a wide range of activities that challenge the students on their knowledge of astrophysics as detailed in topic 8 of the Pearson Edexcel IGCSE Physics specification. The numerous quiz rounds which include “Shine a LIGHT on any ERRORS” will engage and motivate their students whilst they assess their understanding of the content and recognise any areas that require further attention. The lesson has been designed to include as many of the specification points as possible but the following have been given particular attention: Understanding of the terms Solar system, galaxy and universe Gravitational field strength varies on different planets Gravitational force causes the Moon to orbit the Earth and the planets to orbit the Sun Use the relationship between orbital speed, orbital radius and time period Evolution of stars of a similar mass to our Sun and of stars with larger masses The evidence that supports the Big Bang theory The change in the frequency and wavelength of a wave if the source of the wave is moving in relation to the observer Red-shift as evidence of an expanding universe This topic contains a number of principles or theories which can be poorly understood by students so extra time has been taken to guide them in the formation of descriptions and explanations.

This fully-resourced REVISION lesson has been written to challenge the students on their knowledge of the content of topic 6 (Magnetism and electromagnetism) of the Pearson Edexcel IGCSE Physics specification. The engaging PowerPoint and accompanying resources will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Magnets attract and repel other magnets and attract magnetic materials Magnetism is induced in some materials when they are placed in a magnetic field The construction of an electromagnet Use of the left-hand rule to predict the direction of the resulting force in a motor How the motor effect is applied in a loudspeaker The structure and function of a transformer Know and use the relationship between input and output voltages and the turns ratio Know and use the relationship between input and output power for 100% efficient transformer Explain the use of a step-up transformer in the transmission of electrical energy Quiz rounds such as “THE BIG REVEAL” and “WHAT EXACTLY AM I” are used to test the students on their knowledge of key terms and structures and all of the tasks are differentiated to allow students of differing abilities to access the work

This fully-resourced REVISION lesson has been written to challenge the students on their knowledge of the content of topic 5 Solids, liquids and gases) of the Pearson Edexcel International GCSE Physics specification. The engaging PowerPoint and accompanying resources will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Using the correct units Converting between the Kelvin and degrees Celsius scales Explain the qualitative relationship between pressure and Kelvin temperature Use the relationship between pressure and Kelvin temperature Know and use the equations for density and pressure Design an experiment to investigate density Know the meaning of the specific heat capacity Use the equation for change in thermal energy Quiz rounds such as “SAY WHAT YOU SEE” and “YOU DO THE MATH” are used to test the students on their knowledge of key terms as well as numerical facts

This engaging revision resource has been written with the sole aim of challenging students on their knowledge of both the Core and Supplement sections of TOPIC 2 of the Cambridge IGCSE Physics specification. The resource includes an engaging PowerPoint (68 slides) and accompanying worksheets, some of which are differentiated. The wide range of activities in the lesson which include exam questions with explained answers and quiz competitions will motivate the students whilst they evaluate and assess their knowledge of the content and recognise those areas which will require further attention. The lesson has been designed to cover as many parts of the topic as possible, but the following sub-topics have been given a particular focus: The properties of solids, liquids and gases Conduction, convection and radiation Melting and boiling points Boiling vs evaporation Specific latent heat The structure and action of liquid-in-glass thermometers The use of thermocouples Specific heat capacity The mathematical elements of the topic are covered throughout the lesson and students are given helpful hints to support them in structuring their answers. This resource can be used at the end of the topic or in the lead up to the mocks or the actual IGCSE terminal examinations.

This is fully-resourced REVISION lesson that contains an engaging PowerPoint (98 slides) and associated differentiated worksheets and has been designed to challenge the students on their knowledge of the content in TOPIC 4 (Electricity and magnetism) of the Cambridge IGCSE Physics specification. The lesson includes a wide range of activities which aim to motivate the students whilst they assess their understanding of the content and recognise those areas which need further attention. The lesson was designed to include as many sub-topics as possible but the following have been given a particular focus: Logic gates Series and parallel circuits and circuit calculations Resistors Diodes and their roles as rectifiers Fleming’s left-hand rule and the motor effect Transformers This lesson is suitable for revision purposes at numerous times of the year, whether it be at the end of the topic or in the lead up the mocks or actual IGCSE exams