This REVISION lesson contains an engaging and detailed powerpoint (40 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic P8 (Energy - forces doing work) of the Edexcel GCSE Combined Science specification. The following specification points are covered in this lesson: Identify the different ways that the energy of a system can be changed Describe how to measure the work done by a force and understand that energy transferred (joule, J) is equal to work done (joule, J) Recall and use the equation to calculate work done Describe and calculate the changes in energy involved when a system is changed by work done by forces Recall and use the equation to calculate the change in gravitational potential energy Recall and use the equation to calculate the amounts of energy associated with a moving object Explain, using examples, how in all system changes energy is dissipated so that it is stored in less useful ways Explain that mechanical processes become wasteful when they cause a rise in temperature so dissipating energy in heating the surroundings Recall and use the equation to calculate efficiency This lesson is suitable for use throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This is a concise REVISION lesson that contains an engaging powerpoint (28 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic P15 (Forces and matter) of the Edexcel GCSE Combined Science specification. The following sub-topics in the specification are covered in this lesson: Describe the difference between elastic and inelastic distortion Recall and use the equation for linear elastic distortion including calculating the spring constant Use the equation to calculate the work done in stretching a spring Describe the difference between linear and non-linear relationships between force and extension Investigate the extension and work done when applying forces to a spring This lesson can be used throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This REVISION lesson contains an engaging powerpoint (45 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topics P12 (Magnetism and the motor effect) and P13 (Electromagnetic induction) of the Edexcel GCSE Combined Science specification. Generally, these topics are poorly understood by students but are regularly assessed through questions in the GCSE exams and so time has been taken to design the lesson so that the key points are covered and common misconceptions addressed. The following specification points are covered in this lesson: Recall that unlike magnetic poles attract and like magnetic poles repel Explain the difference between permanent and induced magnets Describe the use of plotting compasses to show the shape and direction of the field of a magnet and the Earth’s magnetic field Explain how the behaviour of a magnetic compass is related to evidence that the core of the Earth must be magnetic Explain that magnetic forces are due to interactions between magnetic fields Recall and use Fleming’s left-hand rule to represent the relative directions of the force, the current and the magnetic field for cases where they are mutually perpendicular Use the equation which connects force on a conductor, magnetic flux density, current and length Recall that a transformer can change the size of an alternating voltage Explain why, in the national grid, electrical energy is transferred at high voltages from power stations, and then transferred at lower voltages in each locality for domestic uses as it improves the efficiency by reducing heat loss in transmission lines Explain where and why step-up and step-down transformers are used in the transmission of electricity in the national grid Use the power equation (for transformers with 100% efficiency) This lesson is suitable for use throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This is a detailed REVISION lesson that contains an engaging powerpoint (99 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic 8 (Global challenges) of the OCR GCSE Physics A specification. The following specification points are covered in this lesson: Explain the factors which affect the distance required for road transport vehicles to come to rest in emergencies and the implications for safety Estimate how the distances required for road vehicles to stop in an emergency, varies over a range of typical speeds Estimate the forces involved in typical situations on a public road Describe the main energy sources available for use on Earth, compare the ways in which they are used and distinguish between renewable and non-renewable sources Explain patterns and trends in the use of energy resources Recall that step-up and step-down transformers are used to change the potential difference as power is transferred from power stations Link the potential differences and numbers of turns of a transformer to the power transfer involved; relate this to the advantages of power transmission at high voltages Recall that the domestic supply in the UK is a.c. at 50Hz and about 230 volts Recall the differences in function between the live, neutral and earth mains wires, and the potential differences between these wires Explain the red-shift of light as seen from galaxies which are receding (qualitative only). The change with distance of each galaxy’s speed is evidence of an expanding universe Explain how red shift and other evidence can be linked to the Big-Bang model Recall that our Sun was formed from dust and gas drawn together by gravity and explain how this caused fusion reactions, leading to equilibrium between gravitational collapse and expansion due to the energy released during fusion Recall the main features of our solar system, including the similarities and distinctions between the planets and their moons Due to the size of this revision lesson, it is likely to be used over the course of a number of lessons and can also be used throughout the duration of the GCSE course, as an end of topic revision lesson or as lessons in the lead up to mocks or the actual GCSE exams

This is a concise REVISION lesson that contains an engaging powerpoint (43 slides) and associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic P8 (Space Physics) of the AQA 9-1 GCSE Physics specification. The following sub-topics in the specification are covered in this lesson: Our Solar System The life cycle of a star Natural satellites Red-shift This lesson can be used throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This is a concise REVISION lesson that contains an engaging powerpoint (34 slides) and associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic P7 (Magnetism and electromagnetism) of the AQA Trilogy 9-1 GCSE Combined Science specification. Generally, this is a topic which isn’t particularly well understood by students but is regularly assessed through questions in the GCSE exams and so time has been taken to design the lesson so that the key points are covered and common misconceptions addressed. The following sub-topics in the specification are covered in this lesson: Poles of a magnet Magnetic fields Electromagnetism Fleming’s left hand rule Electric motors This lesson can be used throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This is an engaging REVISION lesson which is fully-resourced and uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 2 (Forces) of the OCR GCSE Physics A 9-1 specification. The specification points that are covered in this revision lesson include: Recall and apply: distance travelled (m) = speed (m/s) x time (s) Recall and apply: acceleration (m/s2) = change in velocity (m/s) / time (s) Apply: (final velocity (m/s))2 - (initial velocity (m/s))2 = 2 x acceleration (m/s2) x distance (m) Recall and apply: kinetic energy (J) = 0.5 x mass (kg) x (speed (m/s))2 Describe how to measure distance and time and use these to calculate speed Explain the vector–scalar distinction as it applies to displacement and distance, velocity and speed Recall and apply: force (N) = mass (kg) x acceleration (m/s2) Recall and apply: momentum (kgm/s) = mass (kg) x velocity (m/s) Recall and apply: work done (J) = force (N) x distance (m) (along the line of action of the force) Recall and apply: power (W) = work done (J) / time (s) Represent such forces as vectors Define momentum and describe examples of momentum in collision Recall and apply Newton’s third law Recall and apply: force exerted by a spring (N) = extension (m) x spring constant (N/m) Recall and apply: gravity force (N) = mass (kg) x gravitational field strength, g (N/kg Recall and apply: (in a gravity field) potential energy (J) = mass (kg) x height (m) x gravitational field strength, g (N/kg) Recall and apply: pressure (Pa) = force normal to a surface (N) / area of that surface (m2) Recall and apply: moment of a force (Nm) = force (N) x distance (m) (normal to direction of the force Calculate a spring constant in linear case Describe that all matter has a gravitational field that causes attraction, and the field strength is much greater for massive objects Define weight, describe how it is measured and describe the relationship between the weight of an object and the gravitational field strength (g Define and calculate the moment of the force in such examples Use the relationship between the force, the pressure and the area in contact There is clearly a huge emphasis on the mathematical aspect of the subject in this topic and the various skills needed for success in the calculations are tested throughout this lesson. Students will enjoy the range of activities which includes quiz competitions such as “FILL THE VOID” where students compete to be the 1st to complete one of the 12 recall equations in this topic. This lesson is suitable to be used as a revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is a fully-resourced REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Electricity) of the OCR GCSE Physics A 9-1 specification. The specification points that are covered in this revision lesson include: Describe the production of static electricity, and sparking, by rubbing surfaces, and evidence that charged objects exert forces of attraction or repulsion on one another when not in contact Explain how transfer of electrons between objects can explain the phenomena of static electricity Recall that current has the same value at any point in a single closed loop Recall and apply: potential difference (V) = current (A) x resistance (Ω) Recall and apply: power (W) = potential difference (V) x current (A) = (current (A))2 x resistance (Ω) Describe the differences between series and parallel circuits Represent d.c. circuits with the conventions of positive and negative terminals, and the symbols that represent common circuit elements Recall that current (I) depends on both resistance ® and potential difference (V) and the units in which these are measured Recall and apply the relationship between I, R and V, and that for some resistors the value of R remains constant but that in others it can change as the current changes Explain that for some resistors the value of R remains constant but that in others it can change as the current changes Use graphs and relate the curves produced to the function and properties of circuit elements Calculate the currents, potential differences and resistances in d.c. series and parallel circuits Apply the equations relating potential difference, current, quantity of charge, resistance, power, energy, and time, and solve problems for circuits which include resistors in series, using the concept of equivalent resistance Students will be thoroughly engaged throughout the lesson due to the range of activities which include quiz competitions such as “GRAFT over these GRAPHS” where they compete to be the 1st to recognise a particular component from its resistance graph. The main two question tasks are differentiated so that students who need extra assistance can still access the work and challenge their knowledge. This lesson is suitable to be used as a revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is a fully-resourced REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 4 (Magnetism and magnetic fields) of the OCR GCSE Physics A 9-1 specification. The specification points that are covered in this revision lesson include: Describe the attraction and repulsion between unlike and like poles for permanent magnets Describe the difference between permanent and induced magnets Explain how the behaviour of a magnetic (dipping) compass is related to evidence that the core of the Earth must be magnetic Apply: force on a conductor (at right angles to a magnetic field) carrying a current = magnetic flux density x current x length Apply: potential difference across primary coil (V)/potential difference across secondary coil (V) = number of turns in primary coil / number of turns in secondary coil Describe how a magnet and a current-carrying conductor exert a force on one another Show that Fleming’s left-hand rule represents the relative orientations of the force, the current and the magnetic field Explain how the force exerted from a magnet and a current-carrying conductor is used to cause rotation in electric motors Explain the action of a loudspeaker and headphones Of all of the Physics topics, this one tends to be one of the least well understood. Therefore, time has been taken to not only make this an engaging revision lesson but to go into detail on some of the topics which are commonly assessed in the exams. LInks have also been made to topic 3 (electricity) as these can often be combined in questions on Paper 1. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is a fully-resourced REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 7 (Magnetism and electromagnetism) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Poles of a magnet Electromagnetism Fleming’s left hand rule Electric motors Loudspeakers Transformers Of all of the Physics topics, this one tends to be one of the least well understood. Therefore, time has been taken to not only make this an engaging revision lesson but to go into detail on some of the topics which are commonly assessed in the exams. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 2 (Electricity) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Standard circuit diagram symbols Current, resistance and potential difference Resistors Series and parallel circuits Direct and alternating potential difference Mains electricity Power Static charge The students will thoroughly enjoy the range of activities, which include quiz competitions such as “GRAFT over these GRAPHS” where they have to compete to be the 1st to recognise one of the graphs associated with the resistors whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging REVISION lesson which is fully-resourced and uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 2 (Electricity) of the Pearson Edexcel IGCSE Physics 9-1 specification (4PH1) for first teaching in 2017 and first assessment in June 2019. The specification points that are covered and challenged in this revision lesson include: Use the following units: ampere (A), coulomb ©, joule (J), ohm (Ω), second (s), volt (V) and watt (W) understand how the use of fuses protects the device or user in a range of domestic appliances Know and use the relationship between power, current and voltage Know the difference between mains electricity being alternating current (a.c.) and direct current (d.c.) being supplied by a cell or battery Understand how the current in a series circuit depends on the applied voltage and the number and nature of other components Know and use the relationship between voltage, current and resistance Know that current is the rate of flow of charge Know that electric current in solid metallic conductors is a flow of negatively charged electrons Know that the voltage across two components connected in parallel is the same Calculate the currents, voltages and resistances of two resistive components connected in a series circuit Explain how positive and negative electrostatic charges are produced on materials by the loss and gain of electrons Know that there are forces of attraction between unlike charges and forces of repulsion between like charges The students will thoroughly enjoy the range of activities, which include quiz competitions such as “COMPLETE ME” where they have to compete to be the 1st to recognise an electrical key term to complete a passage whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual International GCSE exams

This fully-resourced REVISION lesson is detailed and engaging and uses a range of exam questions, understanding checks, quick tasks and quiz competitions to allow students to assess their understanding of the content within topic 7 (Radioactivity and particles) of the Pearson Edexcel IGCSE Physics 9-1 specification (4PH1) for first assessment in June 2019. The specification points that are covered in this revision lesson include: Describe energy transfers involving energy stores Use the principle of conservation of energy Know and use the relationship between efficiency, useful energy output and total energy output Describe how thermal energy transfer may take place by conduction, convection and radiation Explain ways of reducing unwanted energy transfer, such as insulation Know and use the relationship between work done, force and distance moved in the direction of the force Know and use the relationship between gravitational potential energy, mass, gravitational field strength and height Know and use the relationship between kinetic energy, mass and speed Understand how conservation of energy produces a link between gravitational potential energy, kinetic energy and work Use the relationship between power, work done (energy transferred) and time taken Describe the energy transfers involved in generating electricity using water, wind, geothermal resources, solar, fossil fuels and nuclear power The students will thoroughly enjoy the range of activities, which include quiz competitions such as “The TRANSFER MARKET” where they have to compete to be the 1st to identify the type of energy transfer shown whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual International GCSE exams

This is a detailed and engaging REVISION lesson which is fully-resourced and uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 7 (Radioactivity and particles) of the Pearson Edexcel IGCSE Physics 9-1 specification (4PH1) for first assessment in June 2019. The specification points that are covered in this revision lesson include: Use the following units: becquerel (Bq), centimetre (cm), hour (h), minute (min) and second (s) Describe the structure of an atom in terms of protons, neutrons and electrons and use symbols to represent isotopes Know the terms atomic (proton) number, mass (nucleon) number and isotope Know that alpha (α) particles, beta (β−) particles, and gamma (γ) rays are ionising radiations emitted from unstable nuclei in a random process Describe the nature of alpha (α) particles, beta (β−) particles, and gamma (γ) rays, and recall that they may be distinguished in terms of penetrating power and ability to ionise Describe the effects on the atomic and mass numbers of a nucleus of the emission of each types of radiation Understand how to balance nuclear equations in terms of mass and charge Know that the activity of a radioactive source decreases over a period of time and is measured in becquerels Know the definition of the term half-life and understand that it is different for different radioactive isotopes Use the concept of the half-life to carry out simple calculations on activity Know that nuclear reactions, including fission, fusion and radioactive decay, can be a source of energy Understand how a nucleus of U-235 can be split (the process of fission) by collision with a neutron, and that this process releases energy as kinetic energy of the fission products Know that the fission of U-235 produces two radioactive daughter nuclei and a small number of neutrons Describe how a chain reaction can be set up if the neutrons produced by one fission strike other U-235 nuclei Explain the difference between nuclear fusion and nuclear fission Describe nuclear fusion as the creation of larger nuclei resulting in a loss of mass from smaller nuclei, accompanied by a release of energy Know that fusion is the energy source for stars The students will thoroughly enjoy the range of activities, which include quiz competitions such as “It’s as easy as ABG” where they have to compete to be the 1st to form a word by using clues about the different types of radiation whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual International GCSE exams