This REVISION lesson contains an engaging powerpoint (45 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topics P12 (Magnetism and the motor effect) and P13 (Electromagnetic induction) of the Edexcel GCSE Combined Science specification. Generally, these topics are poorly understood by students but are regularly assessed through questions in the GCSE exams and so time has been taken to design the lesson so that the key points are covered and common misconceptions addressed. The following specification points are covered in this lesson: Recall that unlike magnetic poles attract and like magnetic poles repel Explain the difference between permanent and induced magnets Describe the use of plotting compasses to show the shape and direction of the field of a magnet and the Earth’s magnetic field Explain how the behaviour of a magnetic compass is related to evidence that the core of the Earth must be magnetic Explain that magnetic forces are due to interactions between magnetic fields Recall and use Fleming’s left-hand rule to represent the relative directions of the force, the current and the magnetic field for cases where they are mutually perpendicular Use the equation which connects force on a conductor, magnetic flux density, current and length Recall that a transformer can change the size of an alternating voltage Explain why, in the national grid, electrical energy is transferred at high voltages from power stations, and then transferred at lower voltages in each locality for domestic uses as it improves the efficiency by reducing heat loss in transmission lines Explain where and why step-up and step-down transformers are used in the transmission of electricity in the national grid Use the power equation (for transformers with 100% efficiency) This lesson is suitable for use throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This is a concise REVISION lesson that contains an engaging powerpoint (43 slides) and associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic P8 (Space Physics) of the AQA 9-1 GCSE Physics specification. The following sub-topics in the specification are covered in this lesson: Our Solar System The life cycle of a star Natural satellites Red-shift This lesson can be used throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This is a concise REVISION lesson that contains an engaging powerpoint (28 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic P15 (Forces and matter) of the Edexcel GCSE Combined Science specification. The following sub-topics in the specification are covered in this lesson: Describe the difference between elastic and inelastic distortion Recall and use the equation for linear elastic distortion including calculating the spring constant Use the equation to calculate the work done in stretching a spring Describe the difference between linear and non-linear relationships between force and extension Investigate the extension and work done when applying forces to a spring This lesson can be used throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

This engaging revision resource has been written with the sole aim of challenging students on their knowledge of both the Core and Supplement sections of TOPIC 2 of the Cambridge IGCSE Physics specification. The resource includes an engaging PowerPoint (68 slides) and accompanying worksheets, some of which are differentiated. The wide range of activities in the lesson which include exam questions with explained answers and quiz competitions will motivate the students whilst they evaluate and assess their knowledge of the content and recognise those areas which will require further attention. The lesson has been designed to cover as many parts of the topic as possible, but the following sub-topics have been given a particular focus: The properties of solids, liquids and gases Conduction, convection and radiation Melting and boiling points Boiling vs evaporation Specific latent heat The structure and action of liquid-in-glass thermometers The use of thermocouples Specific heat capacity The mathematical elements of the topic are covered throughout the lesson and students are given helpful hints to support them in structuring their answers. This resource can be used at the end of the topic or in the lead up to the mocks or the actual IGCSE terminal examinations.

This fully-resourced REVISION lesson has been written to challenge the students on their knowledge of the content of topic 6 (Magnetism and electromagnetism) of the Pearson Edexcel IGCSE Physics specification. The engaging PowerPoint and accompanying resources will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Magnets attract and repel other magnets and attract magnetic materials Magnetism is induced in some materials when they are placed in a magnetic field The construction of an electromagnet Use of the left-hand rule to predict the direction of the resulting force in a motor How the motor effect is applied in a loudspeaker The structure and function of a transformer Know and use the relationship between input and output voltages and the turns ratio Know and use the relationship between input and output power for 100% efficient transformer Explain the use of a step-up transformer in the transmission of electrical energy Quiz rounds such as “THE BIG REVEAL” and “WHAT EXACTLY AM I” are used to test the students on their knowledge of key terms and structures and all of the tasks are differentiated to allow students of differing abilities to access the work

This fully-resourced revision lesson challenges the students on their knowledge of the content detailed in topic 3 (Particle model of matter) of the AQA GCSE Physics specification. The wide range of activities which include exam questions with clear explanations will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the topic as possible but the following specification points have been given particular attention: Recall and apply the equation to calculate density Explaining differences in density between states of matter Internal energy and the result of heating the particles in a system Applying the equation to calculate the specific heat capacity Understanding that temperature does not change during changes of state Applying the equation to calculate the specific latent heat Explaining the qualitative relationship between the temperature of a gas and its pressure Applying the equation that links pressure, volume and a constant The engaging PowerPoint guides students on the use of key mathematical skills to aid success with the various calculations

This fully-resourced revision lesson challenges the students on their knowledge of the content detailed in topic 1 (Matter) of the OCR GCSE Physics specification. The wide range of activities, which include exam questions with clear explanations, will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the module as possible but the following specification points have been given particular attention: Recall and apply the equation to calculate density Describe how and why the atomic model has changed over time Describe the atom and recall the typical size Explain the difference in density between different states of matter Describe how mass is conserved when physical changes occur Describe how physical changes differ from chemical changes Define the term specific heat capacity and distinguish between that and specific latent heat Applying the equation to calculate the specific heat capacity Understanding that temperature does not change during changes of state Applying the equation to calculate the specific latent heat Explaining the qualitative relationship between the temperature of a gas and its pressure Applying the equation that links pressure, volume and a constant Explain how doing work on a gas can increase its temperature Explain why pressure in a liquid varies with depth Most of the resources are differentiated to allow students of differing abilities to access the work and be challenged and the PowerPoint guides the students through the range of mathematical skills which are tested in this module

This is a fully-resourced revision lesson that has been written to include a wide range of activities that challenge the students on their knowledge of astrophysics as detailed in topic 8 of the Pearson Edexcel IGCSE Physics specification. The numerous quiz rounds which include “Shine a LIGHT on any ERRORS” will engage and motivate their students whilst they assess their understanding of the content and recognise any areas that require further attention. The lesson has been designed to include as many of the specification points as possible but the following have been given particular attention: Understanding of the terms Solar system, galaxy and universe Gravitational field strength varies on different planets Gravitational force causes the Moon to orbit the Earth and the planets to orbit the Sun Use the relationship between orbital speed, orbital radius and time period Evolution of stars of a similar mass to our Sun and of stars with larger masses The evidence that supports the Big Bang theory The change in the frequency and wavelength of a wave if the source of the wave is moving in relation to the observer Red-shift as evidence of an expanding universe This topic contains a number of principles or theories which can be poorly understood by students so extra time has been taken to guide them in the formation of descriptions and explanations.

This revision lesson has been filled with activities that will challenge the students on their knowledge and understanding of the content detailed in topic 8 (Energy - forces doing work) of the Pearson Edexcel GCSE Physics specification. The wide range of activities in the engaging PowerPoint and accompanying resources will check on the knowledge of this topic and allow the students to recognise those areas which need further attention before the mock or terminal GCSE exams. This resource has been designed to cover as much of topic 8 as possible but the following points have received particular attention: Describe how to measure the work done by a force Understand that work done is equal to energy transferred Recall and use the equation to calculate work done Calculate the changes in energy involved when a system is changed by work done by forces Recall and use the equation to calculate gravitational potential energy Recall and use the equation to calculate kinetic energy Explain how energy is dissipated so that it is stored in less useful ways Define power as the rate at which energy is transferred and that 1 watt is equal to one joule per second Recall and use the equation to calculate power Recall and use the equation to calculate efficiency The mathematical content of this specification and this topic is heavy and in line with this lots of calculated-based tasks are included and all of the answers are explained in steps so students can assess their progress The main task of the lesson which challenges students to use the principle of moments has been differentiated so that differing abilities can access the work

This revision lesson has been filled with activities that will challenge the students on their knowledge and understanding of the content detailed in topic 9 of the Pearson Edexcel GCSE Physics specification. The wide range of activities in the engaging PowerPoint and accompanying resources will check on the knowledge of the forces and their effects topic and allow the students to recognise those areas which need further attention before the mock or terminal GCSE exams. This resource has been designed to cover as much of topic 9 as possible but the following points have received particular attention: What happens when objects can interact at a distance without contact What happens when objects can interact by contact Explain the difference between vector and scalar quantities using examples Draw free body diagrams Recall and use the equation to calculate the moment of a force Recall and use the principle of moments in situations where rotational forces are in equilibrium Explain ways of reducing unwanted energy transfer through lubrication The main task of the lesson which challenges students to use the principle of moments has been differentiated so that differing abilities can access the work

This revision lesson is fully-resourced and the engaging PowerPoint and accompanying resources have been designed to challenge students on their understanding of the content detailed in topics 2.7, 2.8 and 2.9 of the WJEC GCSE Physics specification. It was decided that the close links between the types of radiation, half-life and nuclear energy lent themselves to a combined revision resource. The lesson was written to cover as much of the topics as possible but the following points have been given particular attention: The nucleon and proton number and the numbers of neutrons and protons in an atomic nucleus Recognising and representing isotopes Calculating the half-life when given information about the radioactive count The differing penetrating powers of the three types of radiation Background radiation Sources of background radiation and possible reasons for varying levels of radon gas Nuclear decay equations for alpha and beta decay Nuclear fission and nuclear fusion Representing a nuclear fission reaction in an equation The wide range of activities which include exam-style questions with fully-explained answers, differentiated tasks and quick quiz competitions will engage and motivate the students whilst they recognise the areas of these topics which will require their further attention It is estimated that it will take in excess of 2 hours of GCSE teaching time to complete this lesson

This fully-resourced revision lesson challenges the students on their knowledge of the content which is detailed in topic 14 (Particle model) of the Pearson Edexcel GCSE Physics specification. The wide range of activities, which include exam-style questions with clear explanations, will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the module as possible but the following specification points have been given particular attention: Recall and use the equation to calculate density Explain the differences in density between the different states of matter Describe that mass is conserved during physical changes Explain how heating a system will change the temperature or change a state Define the terms specific heat capacity and specific latent heat and describe the differences between them Use the equations involving specific heat capacity and specific latent heat Explain the qualitative relationship between Kelvin temperature and pressure of a gas Convert between the Kelvin and degrees Celsius scales Explain the effect of changing the volume on the pressure of a fixed mass of gas at a constant temperature Explain why doing work on a gas can increase the temperature Most of the resources are differentiated to allow students of differing abilities to access the work and be challenged and the PowerPoint guides the students through the range of mathematical skills which are tested in this topic