This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with an introduction to the main functions of the female and male reproductive systems. This then leads into a task whereby students will firstly watch a video on the structure of the female reproductive system, during which they will need to label a diagram. After this, students will watch a video on the structure of the male reproductive system, again students will need to label a diagram whilst watching this video. Students can then mark their work using the mark scheme provided. Next, students will each be given a card of information which describes the function of one part of either the male/female reproductive system. Students will need to walk around the room and share information with each other to complete their own table to summarise each of these functions. The mark scheme for this task is also included so students can either self assess or peer assess their work. The next activity is a progress check task, students will answer a set of levelled questions based upon what they have learned so far this topic. Once this task has been completed, students can mark and correct their own work. Lastly, students will complete an activity whereby they will be required to match the correct reproductive structure with it’s function, students can self-assess their work once complete, using the answers provided. The plenary task is an anagram challenge - students should try to unscramble the words to reveal 6 key words learned over the last two lessons on adolescence and reproductive systems. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the stages involved in fertilisation, students will be asked to rearrange a set of sentences into the correct order to correctly describe the process of fertilisation. Seed dispersal is now introduced, firstly students are asked to consider two questions - why the parent plant wants to disperse seeds away from itself and what are the main methods of seed dispersal that we already know of. Students can discuss the answers to these questions in pairs before feeding back into a class discussion, the answers to these questions can then be revealed. Next, students will be given a worksheet of questions and will then watch a video on various methods of seed dispersal. Students will need to answer the questions whilst watching the video, the mark scheme for this task is included in the PowerPoint for students to self-assess their work once it is complete. The last task is a progress check, whereby students will need to copy and complete a paragraph which describes the importance of seed dispersal. Students can either peer-assess or self-assess their work using the answers provided once this is complete. The plenary requires students to create three quiz questions to test their peers knowledge of what they have learned so far this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the different organs of a plant – students should be able to name and correctly label the stem, leaves, flower and roots. Students will also need to correctly identify the function of each of these organs, this task can be self-assessed using the mark scheme provided. Students will then watch a video on leaves and the structure of leaves, students will need to answer a set of questions whilst watching this video. This work can then be self-assessed using the answers provided on the PowerPoint. The next task requires students to complete a worksheet which focuses on the adaptations of the leaves, this work can be self-assessed using the mark scheme provided once complete. The last activity then requires students to complete a worksheet which focuses on labelling structures and functions of a leave, this involves filling in boxes which surround a diagram of a cross-section of a leaf. The plenary task then requires students to ‘pick a plenary’ – students can either summarise what they have learned in three sentences or write a definition of a set of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a list of minerals that plants need to survive - magnesium, phosphates, nitrates and potassium. Students will need to ‘Think > Pair > Share’ their ideas about how plants receive their minerals. After a short class discussion, students will be shown a diagram which demonstrates how mineral ions are taken up by the plant. Students will now watch a video, this video will go through some of the symptoms of different mineral deficiencies. Whilst watching the video, students will need to note down these symptoms. This task can be marked and corrected against the mark scheme provided once complete. The next part of the lesson will focus on farming methods, students will each be given a different bit of information on a method employed by farmers to increase crop yield. Students will need to walk around the room to share information on these methods in order to complete a summary table. This can then be self-assessed using the mark scheme provided on the PowerPoint. Lastly, students will now design and complete a pamphlet of information for farmers to help them decide which type of minerals their plants may be deficient in, this should include images of a healthy plant as well as unhealthy plants depicting various mineral deficiencies. The plenary task requires students to write a Whatsapp message to a friend, explaining what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.1 Health & Lifestyle. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the idea of a ‘food pyramid’, students will be given a selection of different foods and will need to consider how often they should be eaten, and so where on the food pyramid they should be placed. Once students have had chance to discuss and arrange their foods on the food pyramid, the answers can be revealed so students can check their work. Next, students are introduced to the idea of different food/drink groups: carbohydrates, protein, fats, vitamins, minerals, water and fibre. Students will each be given a card of information about one of these groups, they will need to walk around the room to share information with their peers in order to complete the summary table in their books. This task can be self-assessed using the mark scheme provided once it is complete. Next, students will consider how much energy different people require. Firstly, some examples will be talked through as a class - e.g. males generally need more energy than women, older people need less energy than younger people etc. Students will then complete a task to assess their knowledge on this topic, which can be marked and corrected using the answers provided once complete. Lastly, students will be introduced to the idea of a food test, they will be asked to consider which types of nutrients are present in a set of food which include: lemonade, crisps, margarine, bread & meat. After students have made predictions, they can then complete the food test investigation (equipment list and method is included). The plenary task requires students to spend a minute or two talking about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on pollination, students are asked to complete a ‘fill-in-the-blank’ task which outlines the roles of the male and female reproductive parts of the flower. This work can be self-assessed using the mark scheme provided. Next, students will need to watch a video on fertilisation, during which they will answer a set of questions. Once this task has been completed, students should self-assess their work using the mark scheme provided. Students will now study the structure and function of a seed, the first task is a memory test. Students will have a few minutes to study a diagram of a seed with the labels included, the labels will then be taken away and students will have a few minutes to recreate the diagram - including the correct labels. Students can check their work against the answers provided once this is complete. Next, students will be asked to ‘Think > Pair > Share’ their ideas on the conditions required for a seed to germinate. Students can firstly discuss their ideas in pairs, then they will need to note their ideas down on a mind map. The answers will then be revealed on the PowerPoint for students to check their work and make corrections. Lastly, students are given a set of sentences which contain true and false statements about what they have learned so far on pollination and fertilisation. Students will need to mark and correct the work, this task can also be self-assessed using the mark scheme provided. The plenary requires students to write a twitter message demonstrating what they have learned this lesson, making sure to #keywords. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with an introduction to the definition of ‘specialised’, which follows on to define a ‘specialised cell’ as a cell that has special structures/features to help it carry out its job. Students are then shown some diagrams of specialised cells and are shown a video, whilst watching the video they are asked to note down as many specalised cells as they can. This work can then be checked and corrected using the answers provided on the PowerPoint. Students will now each be given a card of information about a the structural features and functions of certain specialised cells. Students will need to walk around the room, sharing information in order to complete a summary table. Finally, students are asked to complete an ‘Assessment Task’, which is a set of exam-style questions based upon what they have learned the last two lessons. Students can write their answers in their books, the mark scheme for these questions is included so students can assess their work. Lastly, students are asked to complete a ‘Job Advert’ for one of the specialised cells they have learned about this lesson, the advert should include a description of the job itself and the sort of traits required to perform the job. The plenary task requires students to copy and complete a set of sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the substances that move in and out of cells via a process called diffusion. Students are then asked to summarise this information by sketching and labelling a diagram of a cell. The idea of diffusion is further explained using an image of a deodrant bottle spraying smelly particles into the air and showing how they spread from an area of high concentration to an area of low concentration. A definition of this process is shown to students, before they are asked to complete a fill-in-the-blank task to summarise the process, this work can be self-assessed using the mark scheme provided. Next, students will need to sketch diagrams demonstrating the various stages of diffusion, and will need to match the correct statements to the correct diagrams. This work can be then be self or peer assessed using the mark scheme provided. The next part of the lesson looks at factors that affect diffusion, students are firstly asked to ‘Think > Pair > Share’ their ideas on the factors which might affect the rate of diffusion. After students have fed back into class discussion, the answers are revealed for students to note down in their books. They will then look more closely at the effect of temperature on the rate of diffusion by watching a video and then summarising what they have learned by completing a fill-in-the-blank task. Lastly, students are shown diagrams of plant cells of healthy plants vs. wilted planted to demonstrate the effect of having too much/too little water in the vacuole of plant cells. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the definition for ‘gestation’ - students are then asked to match the mammal to the correct gestation period length, from the selection provided. This task can be marked once it is complete. Students are then asked to consider the advice that a midwife might give to a pregnant woman, regarding her health and her baby’s health. After a few minutes of partner discussion, students can feed back to a class discussion where hopefully factors such as diet, alcohol consumption and smoking are mentioned. During the next part of the lesson, students will need to walk around the room reading posters of information on the development of a fetus inside the uterus. Students will need to complete a worksheet using this information, the mark scheme for this task is included in the PowerPoint so students can self-assess their work or peer-assess their work once the task is complete. The last activity is a ‘Human Bingo’ task, each student is given the same grid - each box of the grid contains a different question. Students need to walk around the room and get a different student to answer each of the different questions on the grid - once complete they can sit down and shout ‘Bingo!’. The plenary task requires students to come up with five questions for the five answers that are provided on the PowerPoint. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the levels of organisation found within multicellular organisms. Students are then asked to sort the following into the correct order, according to size: cell, organ system, tissue and organ. Students are then shown the definitions for each of the following: cells, tissues and organs before being asked to complete a mind map of organ systems they alread know of. After spending a few minutes on this task, some of the example answers can be revealed for pupils to mark their work. Students are now given a list of organs and are asked to pick the organs which belong to the digestive system, respiratory system and water transport system of plants. Once this task has been completed, students can self-assess their work using the mark scheme provided. The next activity requires students to match the correct organ system name to the correct role of that organ system and then pupils need to complete a fill-in-the-blank task, the answers to both these tasks are included in the PowerPoint for students to self-assess their work. Lastly, students are given a card sort containing organs/cells/tissues - students will need to match the correct cell to the correct tissue and then organ, this can be stuck into a table in their books. This work can then be self-assessed using the mark scheme provided. Students will finally complete a ‘Team Poster Challenge’ to end the lesson. The plenary requires to spend one minute talking to the person next to them about what they have learned this lesson! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with a ‘Cells Rap’ - students will be shown a video, during which they need to write down as many cell organelles as they can. Once they have finished watching their work can be self-assessed using the answers provided. Next, students will be shown a diagram of an animal and plant cell with the organelles labelled. Students are asked to note down the similarities and differences between these two cells, the answers to this task can then be revealed using the PowerPoint presentation. This is followed by a comprehension task whereby students will need to read an information sheet on ‘Animal & Plant Cells’, using this information they will need to answer a set of questions. The mark scheme for this task is included so students can self or peer assess their work once it’s complete. Next, students will learn about the functions of each of the organelles. Students will be given a card of information about the function of one of the organelles. They will need to walk around the room, sharing information in order to complete the summary table. Again, this work can be self-assessed once complete. Lastly students will complete a ‘Team Challenge’ in groups, each group will stand behind a poster and every person has one go to fill in part of the poster (either name/function of organelles), the fastest group to complete the poster correctly wins! The plenary requires students to summarise what they have learned in the lesson by completing the sentence starters provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a video, students will watch the video and they will need to note down the ways in which animals cope with changes in seasons. After students have watched this video, they can then mark and assess their work using the mark scheme provided. Students will now be shown a photo of a snowshoe hare in the winter and in the summer, students should ‘Think>Pair>Share’ their ideas about why the hare changes its coat between the summer and winter, what advantage is this to the hare? After students have had chance to discuss their ideas, the answer can then be revealed so students can check their work. Next, students will be given some information and data about Jack Rabbits and Coyotes. Students will need to use the image of these organisms (on the board) and the data to answer a set of questions. Once students have completed this task, the work can be self-assessed using the mark scheme provided. This leads into the next part of the lesson on predator-prey relationships, students will need to fill in the blanks on a worksheet which describes the changes which occur to predator and prey populations as one increases/decreases. The paragraph summarises the interdependence between predator and prey populations. Lastly, students will watch a video on the types of threats organisms may face in their natural environment and how organisms cope with these. Students will be asked to summarise the ways in which organisms cope with a changing environment whilst they watch the video. Their work can then be marked and corrected using the mark scheme provided on the PowerPoint presentation. The plenary task requires students to write a twitter message about what they have learned today, including #keywords. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a video on extinction, including an extra challenge task for pupils to come up with a definition of extinction. Whilst students are watching the video they will have a set of questions to answer, once this task has been completed students will self-assess their work using the mark scheme provided. Students will now be asked to ‘Think > Pair > Share’ their ideas about what causes extinction to occur within a species. Students will be given a few minutes to talk about this amongst themselves, before feeding back to the class. The answers will then be revealed using the PowerPoint presentation, students can mark and check their work against this mark scheme. Students will now be given cards of information on the 5 main causes of extinction: habitat destruction, introduction of new species, hunting & fishing, environmental changes & new diseases. Students should summarise this information in their books, writing a few sentences for each cause. In groups, students will be given cards of information on different organisms and the reasons why they are being pushed to extinction. Using this information students will need to complete a table of information to include 5 different organisms which are now extinct. Lastly, students will consider ways in which scientists are trying to prevent extinction. Each student will be given some information about the role of a gene bank, examples include: pollen banks, seed banks, cryobank & a tissue bank. They will then need to move around the classroom, sharing information with each to complete a summary table. This task can the be self-assessed using the mark scheme provided in the PowerPoint. The plenary task requires students to pretend you are a conservationist working for a charity that is trying to stop the extinction of one of the organisms you studied earlier in the lesson. Write a twitter message to your followers to raise awareness of the issues that are critically affecting this organism. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to adolescence and puberty, students will be given a card of information which will read as a class before students answer a set of questions. Once this task is complete, students can self-assess their work using the answers provided. Next, students should discuss with their partner the physical changes that could occur to a boy and girl during puberty, their ideas should be noted down as a mind map in their books. Their work can then be checked and corrected using the mark scheme provided. Students will now be given a set of cards describing physical changes which occur in either boys or girls or both, students will need to cut the cards out and stick them into a table in their books. The mark scheme for this task is included for students to self-assess their work. Lastly, students are introduced to the idea of sex hormones which are what cause the changes that occur in boys and girls during puberty. After this, students will be given a set of levelled questions which they should either complete at the back of their books (higher ability) or use their notes from the lesson (lower/middle ability). The plenary task requires students to summarise what they have learned this lesson in three sentences, using as many key words as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to two unicellular organisms - euglena and amoeba. Students can also watch a video to demontrate the motion of an amoeba cell. The main task involves students completing a set of tasks using information sheets on amoeba and euglena cell structure, function and reproduction. Students should work their way through the tasks, once this is complete they can self-assess their work using the mark scheme provided. Next, students should summarise what they have learned during the lesson by completing the fill-in-the-blank task, the answers to this task are included in the PowerPoint so students can self-assess their work once it is complete. Lastly, students will need complete a ‘Key Word Bingo’ activity, they will need to choose 6 words from the list provided. The teacher then reads out a definition, if this definition matches one of the words written down then it can be crossed out. First student to cross all 6 words from their books/grids shouts bingo! The plenary task is a 3-3-1 reduction - students will write down 3 facts, 3 key words and reduce this to 1 key word from the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a video of a song about bones, students can watch the video a couple of times whilst trying to fill in a worksheet to label the main bones of the body. Once students have tried to do this, they can check their work against the answers included in the PowerPoint. Next, students are introduced to the structure of a bone - living tissue which is comprised of hard and spongy parts, along with bone marrow. Students can take some time to sketch a cross-section of the bone into their books, adding labels of these three main parts. The next part of the lesson focuses on the function of the skeleton, firstly students are asked to ‘Think > Pair > Share’ their ideas about the function of a skeleton. After a short class discussion students can feed their ideas back to class and the answers are revealed for students to mark and correct their work. To summarise the main functions, students should complete the ‘copy and complete’ task, this can be marked using the mark scheme included. Lastly, in pairs students will read some information about vertebrates and how to protect the skeleton. Students will need to answer a set of questions using this information, they can complete the task in their books and talk to their partner for help. The mark scheme for the task is included in the PowerPoint presentation so students can mark their work once it is complete. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a homeschool pack designed for the KS3 Year 8 Science course, specifically the ‘B2.1 Health & Lifestyle’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains eight pages of information, to meet learning objectives within the Year 8 ‘Health & Lifestyle’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Nutrients & Food Tests Unhealthy diet Digestive system Bacteria & enzymes in digestion Bacteria & enzymes in digestion Drugs Alcohol Smoking Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This is a homeschool pack designed for the KS3 Year 8 Science course, specifically the ‘B2.3 Adaptation & Inheritance’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains eight pages of information, to meet learning objectives within the Year 8 ‘Adaptation & Inheritance’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Competition & Adaptation Adapting to change Variation Continuous and discontinuous variation Inheritance Natural Selection Extinction Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This is a homeschool pack designed for the KS3 Year 8 Science course, specifically the ‘B2.2 Ecoystem Processes’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains eight pages of information, to meet learning objectives within the Year 8 ‘Ecosystem Processes’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Photosynthesis Leaves Plant Minerals Aerobic Respiration Anaerobic Respiration Food Chains & Webs Disruption to Food Chains & Webs Ecosystems Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This is a homeschool pack designed for the KS3 Year 7 Science course, specifically the B1.1 Cells unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains five pages of information, to meet learning objectives within the Year 7 ‘Cells’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Animal & plant cells Observing cells using a microscope Specialised cells Diffusion - Movement of substances Unicellular organisms Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.