This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. **For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience ** The lesson begins with students recapping on the factors which may affect the distribution of organisms within an environment. Once pupils have discussed their ideas of abiotic and biotic factors which may affect organisms within their habitat they will need to assess their work using the answers provided. The lesson will then focus on sampling techniques, firstly outlining what a quadrat is and how it is used when sampling an environment. The importance of random sampling is stressed & pupils will need to come up with some ideas as to how random samples could be obtained. Once their ideas have been assessed pupils can then move onto a worksheet which demonstrates how random sampling is conducted and explains how to work out the range, mean, median & mode of a data set. Transect sampling is now introduced, pupils will watch a video and answer a set of questions watching the video. Once this task is complete pupils can answer the question using the answers provided on the PowerPoint presentation. The final task is for pupils to perform their own sampling investigation, a worksheet is provided detailing the equipment needed, a method, a species identification key & a results table. Pupils can work in groups of 3 - 5 and use an area close to school such as the sports field / any large grassy area to complete their investigation. Once this is complete pupils can use their data set to find the range, mean, median & mode for each species. The plenary task is for pupils to write down three facts, three key words and a question based on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Molecules & Matter’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a ‘Think > Pair > Share’ activity which requires pupils to recall the properties of a solid, liquid and gas. Once students have discussed this amongst themselves and as a class, they will then complete a fill-in-the-blank task to summarise the properties and the arrangement of particles of a solids, liquids and gases. Once this task has been completed students can self-assess their work suing the mark scheme included. Students will now be introduced to the idea of potential energy and internal energy, a video will then be shown and students will have to answer a set of questions. This work can then be self-assessed using the answers included in the PowerPoint. This then follows into a mid-lesson plenary, pupils will answer an exam question and then peer-assess their work. Next, students will study the different levels of forces of attraction between particles found in solids, liquids and gases. Their knowledge of what they have learned so far this lesson can then be checked using a summary worksheet, students complete their own worksheet, the answers to this are included in the PowerPoint for students to mark their work once complete. Lastly, students will carry out a ‘True or False’ task. The plenary task requires pupils to complete a 3-3-1 summary: 3 facts, 3 key words and 1 question to test their peers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an introduction to evolutionary trees, pupils will be shown how to interpret evolutionary trees and understand the common ancestry between species of organisms. Pupils will then be shown the difference between convergent and divergent evolution. The next part of the lesson will focus on the work of Woese et al, pupils will watch a video and try to answer questions about Woese and his work, this can be assessed using the answers which can be revealed once the video has been watched. Pupils can then watch a second video, using this video they will then try to complete profile cards for three domains as proposed by Woese – archaea, bacteria and eukaryotes. Pupils can again check their work against the answers provided in the PowerPoint slide. Pupils will then be given some information on Woese and his work, students will need to use this information along with what they have learnt so far in the lesson to complete a newspaper article on his work and infamous discovery. The next part of the lesson looks again at evolutionary trees, pupils are shown how to use an evolutionary tree to compare the relationships between organisms. Pupils will then need to complete an exam-style question on evolutionary trees, which can be self-assessed using the mark scheme provided. The plenary task is for pupils to come up with questions for a set of answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with students completing a think > pair > share on the types of environments in which organisms live around the world. After a short discussion with the class about the sorts of environments they are aware of, you can move the PowerPoint slide on to identify the types of biomes present on Earth. The next activity is a copy and complete activity on survival and reproduction as a recap, after pupils have completed this task they can self-assess their work using the answers provided. Next pupils will be introduced to adaptations, pupils will then watch a video on adaptations and answer questions using the information provided. Once they have completed this task they can mark their work using the answers provided. Pupils will now read information posters around the room (resources provided at the end of the lesson) and will use this to complete adaptation profile cards for animals and plants from arctic and desert conditions. The next part of the lesson will focus on extremophiles, pupils will read an article on extremophiles and will read through and underline the descriptions of particular extremophile adaptations. Once this work has been self-assessed pupils will move on to an exam-style question on adaptations, once this task has been completed pupils can either self-assess or peer-assess their work. The plenary task is for pupils to write three quiz questions on the topic of the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed to meet specification points for the NEW AQA Trilogy GCSE Biology ‘Organisation’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy Biology, Chemistry and Physics specifications please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by pupils observing a diagram of a phloem and a xylem vessel and discussing what the similarities and differences are between the two tissues. This can lead into a class discussion about the two structures. Next is a quick recap task, pupils should have already looked at the overall function of both of these vessels so pupils now need to complete sentences to describe the role of the xylem an phloem vessel in plants. The next activity is a video, pupils will given a set of questions and they will need to answer these questions using the video. Once finished they can self-assess their work using the answers provided on the PowerPoint. Next, pupils will need to draw two columns in their book entitled Xylem and Phloem and sort statements into these two columns, after this is completed they can assess their work. The last thing students will need to consider is why is transport so important in plants, pupils will discuss/brainstorm in their books why sugars, mineral ions and water are important to the plant. The answers can then be revealed to them. The final activity is a past-paper 6 mark question, pupils will need to attempt to answer this on their own, at the back of their books for an extra challenge! Plenary activity is to complete a summary of what the students have learnt that lesson, a list of key words will be provided to help them complete this task. All resources are included in the PowerPoint, any questions please ask me via the comments section. Any feedback of this lesson would be much appreciated :) thank you!

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first part of the lesson focuses on outlining the importance of carbon within the living world, where we might find it in our bodies and the world around us. The first task pupils will be asked to complete is a mind map of the processes they think will add or remove carbon dioxide from our atmosphere. Pupils can discuss in pairs and once complete the answers can be revealed for pupils to assess their work. The next task is for pupils to watch a video about greenhouse gases, there are a set of questions pupils will be given which they need to answer whilst watching the video. Once this task is complete pupils can assess their work using the answers provided. The next task is a fill-in-the-blanks task, pupils are given a paragraph about the role of carbohydrates in animals and plants, they need to complete this using the key words provided. Once completed pupils can assess their work using the answers provided. Pupils will then watch a video about the carbon cycle which details the process involved, once the students have watched the video they will be given a worksheet which they need to complete using the captions provided on the PowerPoint slide. Lower ability students may want to complete this as a group & could perhaps complete whilst the video is playing to assist them. Once they have completed the task pupils can self-assess their work using the answers provided. The next task may be better suited to higher ability pupils, a set of cards images and captions are provided per pupil and they need to use this to construct their own carbon cycle in their books. Higher ability pupils may want to test their knowledge and turn to their back page to complete this without looking at their previous work The last task is for pupils to consider the future and how we may be able to implement strategies to help reduce our carbon emissions in order to combat global warming. Pupils are to discuss possible methods/strategies we could use and mind map their ideas in their books. The plenary task is for pupils to turn to the back of their books and write down a description of as many processes which contribute to the carbon cycle as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by looking an organism - a cat- and asking pupils to think about the types of stimulus the cat might respond to in it’s environment, plus which organs it needs to sense these stimuli. Pupils will brainstorm their ideas and then self-assess their work once the answers are revealed, additionally they will answer an exam question on this topic. Next, pupils focus on the effectors and their role in the nervous system. Pupils will be provided with a description of the role of muscles and glands as effectors and will then need to complete an exam question to assess their knowledge, mark scheme provided for either peer or self-assessment. The next part of the lesson will focus on neurons, firstly a diagram of a neuron cell is shown and pupils need to think about how this cell is similar and different to a normal animal cell. Pupils may discuss this in pairs and try and come up with an answer before the mark scheme is revealed. Sensory and motor neurons are now introduced via an animation, pupils can look at the pathway the electrical impulse travels as it moved around the nervous system. Pupils will use this to then copy and complete a summary to describe this process, when completed this can be self-assessed. The final activity is for pupils to copy and complete a table to sum up the main functions of each part the human nervous system either by using a card sort or by putting the statements on the board. This can then be peer or self-assessed when complete The plenary activity is for pupils to summarise the 5 main key words they have learnt that lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a resource which meets specification points within the NEW AQA GCSE Trilogy 'Cells' Sow. Other lessons designed for the new 'Cells' SoW and other new Trilogy Biology and Physics SoW can be found in my TES shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by identifying the purpose of mitosis - growth and repair. Pupils will then be given a double-sided worksheet, the first side corresponds to the first 5 mins 51 seconds of the video included in the PowerPoint slide. Pupils will need to watch the video and answer the questions on the sheet, they are in order but for lower ability classes you may want to stop the video and guide pupils through the work. Self-assess this work using the answers provided in the PowerPoint before moving on with the video. The next part of the video guides pupils through what happens during Mitosis - Prophase, Metaphase, Anaphase, Telophase. Pupils have diagrams of the the processes on the back of their worksheet, they will need to use the video to name the stages and describe what is happening. Self-assess work using the answers that are provided in the PowerPoint. The next activity, pupils are given real images of a cell going through mitosis and descriptions of the stages, they need to cut and stick the stages and the pictures in the correct order to complete a flow diagram. Pupils peer or self-assess their work using red/green pens. **Past-paper question provided as an extra activity for higher-ability pupils - pupils answer the question in their books and peer-assess using the mark scheme** Plenary - pupils write a text message or a tweet to their friend to tell them what they have learnt about this lesson. All resources are included, as well as mark schemes for when pupils self/peer-assess their work. Please leave a review with feedback :) thanks!

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students are firstly introduced to collision theory, outlining the conditions which need to be in place in order for a chemical reaction to occur. Next students are asked to ‘Think, Pair, Share’ factors which they think may affect the rate of a reaction, once students have had chance to discuss this they are introduced to the four main factors which they study within this topic. Firstly, the lesson will focus on surface area, this factor is explained using apple slices turning brown as an example, students are then introduced to the relationship between surface area to volume ratio and the rate of reaction. Students will then need to complete a worksheet of surface area to volume ration calculations, this can then be self-assessed using the mark scheme available. Students will now work through a set of levelled questions looking at data on the effect of surface area on the rate of reaction, this work can be self-assessed using the mark scheme provided in the PowerPoint presentation. The next part of the lesson will focus on the effect of temperature on the rate of reaction, students will firstly need to answer questions whilst watching a video, this work can then be self-assessed using the mark scheme. Next, students will carry out an investigation into the effect of temperature on the rate of reaction between sodium thisulphate and hydrochloric acid. Students will need to collect data and use this to work out the rate of reaction at different temperatures, a worksheet is provided for this task. The last task is for pupils to complete a ‘Quick Check’ set of questions in order to assess what they have learned this lesson, students can then either peer-assess or self-assess their work using the mark scheme provided. The plenary task is for pupils to write a twitter message about what they have learned this lesson, included a hashtag of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a focus on mutations and how they contribute towards genetic variation within a population. Pupils can tag read some information provided in the board and then answer questions in their books, this work can be self-assessed against the mark scheme provided. The next activity involves pupils watching a video about natural selection, using the video they will need to answer questions which again can be self-assessed using the success criteria provided. Pupils will then be shown a slide which demonstrates, with the example of giraffes, how natural selection can ensue within a population of organisms over time. Pupils will then be given a cartoon strip to show how natural selection occurs, they can draw diagrams of any organism they wish to choose and will need to fill in the blanks for the captions below each stage in the process. This work can be self-assessed one complete. The next task pupils need to complete is a card sort describing the steps involved with how head lice become resistant to head lice shampoos, pupils can discuss in pairs to complete this task. Once complete the answers will be revealed, for higher ability pupils they can draw this as a flow diagram in their books as an extension. The final activity is a past-paper question, pupils can complete this in their books. For higher ability pupils you could demand silence and ask for it to be completed at the back of their books as a revision activity, for lower ability pupils you may allow discussion with a partner. The plenary activity involves pupils being provided with the answers to 5 questions, pupils need to think of 5 questions which may link to these answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Organic Chemistry’ SoW. The lesson begins on a description of hydrocarbons and why crude oil is so useful, this is followed by a video on crude oil. Whilst watching the video students will be required to answer a set of questions, this work can then be self-assessed using the mark scheme provided. The next part of the lesson requires students to watch a teacher demonstration of the distillation of crude oil, students will watch the teacher distill crude oil, removing at least four fractions. The fractions can be passed around the classroom and students will need to complete a results table to assess the smell, viscosity, colour and flammability of each fraction. Pupils will now focus on the structure of different alkanes, they will be introduced to the first four alkanes and be asked to think about why there is a pattern in the formulae of alkanes. Next, students will complete a summary table of the structural formulae, displayed formulae, 3D structure and boiling point of the first four alkanes in the homologous series. Students can self/peer assess their work using the answers provided. Finally, pupils will complete a ‘Quick Check’ task, which involves answering a set of questions about what they have learned this lesson. Those higher ability students may want to turn to the back of their books to avoid looking at notes, lower ability will need extra support. Again, the mark scheme for these questions is included in the PowerPoint. The plenary task requires pupils to write 3 facts, 3 key words and one questions to test their peers knowledge of what they have studied in class today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Rates of Reaction’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a video on catalyts, pupils will need to watch this and use the information provided to answer a set of questions. This work can then be self-assessed using the answers provided on the PowerPoint. This is followed by students sketching a reaction profile diagram into their books to show the effect of a catalyst on the activation energy of a reaction. In the next task pupils will be given some information on catalysts, they will need to read through this and use this to complete a place-mat of questions. Once completed, students can either self-assess or peer-assess their work using the mark scheme provided. Pupils will now work through a set of levelled questions on catalysts using data which is provided, pupils can then self-assess their work using the answers provided on the PowerPoint. The final task is a true or false activity, pupils are given a set of statements which they need to decide are true or false. They can write their answers down on mini white boards so it is easier to assess the whole class. The plenary activity requires pupils to talk to their partner, for a few minutes, about what they have learnt in the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Molecules & Matter’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to radiation, firstly looking at background radiation. Students are given some time to discuss on their tables, the sources of background radiation. After students have fed into a class discussion the answers can be revealed on the PowerPoint. Next, students are shown some data on the sources of background radiation. Students will be required to answer a set of questions about this data, they can complete the work in their books and the mark scheme is provided on the PowerPoint. Next, students are introduced to Marie Curie and her work towards radioactivity. The students will be given a list of questions and they will need to answer these using the video, the answers to which are then included so students can self-assess their work. Students will then be asked to consider the safety rules when dealing with an radioactive substances before a teacher demonstration is carried out using a Geiger-Muller counter. Student are asked to observe the demo and also record their observations and answer a set of questions. This can then be marked using the mark scheme provided. The last task requires pupils to complete a summary worksheet on radiation, this work can be self-assessed using the mark scheme provided. The plenary activity is an exit card, students will need to write down three things they learned during the lesson, five key words and one questions to test their peers knowledge of the lesson content. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Rates of Reaction’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with students introduced to the idea of concentration in terms of no. of particles per cm3. Students will then need to ‘Think > Pair > Share’ their ideas of how an increase in concentration may affect the rate of a reaction. Students can use their ideas from this first task to make a prediction for the investigation into the rate of reaction between sodium thiosulphate and different concentrations of HCl. Students will need to conduct this investigation using the practical sheet provided, record their results, plot a graph of their results and complete a conclusion. Students can assess their explanation of the results they collected using the answer provided in the PowerPoint presentation. The next part of the lesson will focus on the effect of pressure on the rate of a reaction. Students will firstly be introduced to the idea of an increasing pressure leading to an increase in the number of particles per cm3, using this information and the diagrams provided pupils can ‘Think > Pair > Share’ their ideas about how an increase in pressure would affect the rate of a reaction. Their answer to this question can self-assessed using the answers provided. Next, students need to work through a set of levelled questions on the effect of pressure on the rate of a reaction. This work can be self-assessed using the answers provided on the PowerPoint. The last task is for pupils to plot a set of results onto graph paper, using these data they can calculate the initial rate of reactions for two concentrations of HCl. Students can assess their work using the mark scheme provided on the PowerPoint. The plenary task is for pupils to write down three quiz questions (and the answers!) to test their peers knowledge of what they have learned in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Rates of Reaction’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an introduction to reversible reactions, including the example of thermal decomposition of ammonium chloride. Pupils will then conduct an investigation into the energy changes which occur during a reversible reaction, using the practical sheet provided students will carry out the experiment and record their results in the table provided. The reversible reaction from this investigation is then shown on the board, with an explanation of the energy changes that are taking place as the reaction moves in either the forward or reverse direction. Pupils will now watch a video on energy changes which take place during a reversible reaction, using this they will need to answer a set of questions. This work can be self-assessed using the answers provided on the PowerPoint presentation. Pupils will now need to complete a ‘Quick Check’ task which includes questions within the module of ‘Rates of Reaction’, students can then self-assess or peer-assess their work using the mark scheme provided. Finally, pupils can complete a crossword which summarizes definitions used within the ‘Rates of Reaction’ module, the answers for this are provided for self/peer assessment. The plenary task required pupils to complete an exit card listing 3 things they have learnt today, 5 key words and 1 question to test their peers knowledge of a subject. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first part of the lesson asks students to think > pair > share some of their answers to questions about pollution - where does it come from? How may we monitor it? Once pupils have gathered together their ideas as groups, a class discussion can highlight some of the important ideas & the next slide details the answers. The next task focuses on sulfur dioxide pollution and it’s contribution to the formation of acid rain. Pupils will be given some information in pairs about this pollutant and will be required to answer questions about this information in their books. Once completed pupils are able to self-assess their work using the answers provided in the PowerPoint. Pupils will now watch a video on complete vs. incomplete combustion to think about the gases released into the atmosphere via these two processes. They will need to answer a set of questions whilst watching this video, they can then self-assess their work using the answers provided. Two further atmospheric pollutants are now introduced to the class - nitrogen oxides and also solid particulates released by diesel engines. Pupils will now complete a fill-in-the-blank task to summarise what they have learned to far this lesson, this task can then be self-assessed using the answers provided. This is followed by a quick check ‘True or False’ activity, pupils will need to identify whether a list of statements are true or false. The next part of the lesson focuses on how scientists can monitor pollution, pupils are given a set of results from particle collector pads which have been left in certain locations around the UK. Pupils need to record their results in a table, draw a graph to represent the results and write a conclusion about their results. The plenary task is for pupils to either summarise what they have learned today in three sentences or write a definition of a list of key words from today’s lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a quick recap from the previous lesson on the cause and control of diabetes, pupils will need to copy and complete sentences in their books, which can then be self-assessed. Next pupils are given detailed posters of information on the treatments available to patients with type 1 and type 2 diabetes. Pupils will need to read through these posters in pairs/on a table and answer the questions on the PowerPoint slide. Once finished, pupils can self-assess their work using the answers provided. Pupils will now focus on the advantages and disadvantages of different medical cures for type 1 diabetes. In pairs they will be given a set of cards informing them of new advances in treatments available to patients with type 1 diabetes and they will need to create a summary table to weight up the pro’s and con’s of each treatment. The final activity is an exam question on what pupils have learnt so far that lesson, this is accompanied with a mark scheme which pupils can use to mark their work. The plenary activity is an anagram challenge, pupils need to unscramble the letters to spell a key word from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed to meet specification points for the NEW AQA Trilogy Biology specification, particularly the ‘Organisation’ SoW. For more resources designed for the NEW AQA Trilogy Biology, Chemistry and Physics specifications please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a video on breathing and the organs of the respiratory system, pupils are provided with a list of questions which they will need to answer using the information in the video. Once the video is finished they can then self-assess their work using the answers provided. Pupils are then provided with an information on breathing and gas exchange, they are also given a worksheet that they will to complete using the information. For lower ability classes it would be best to read through the information as a class, tag-reading, so that they are more familiar with certain words before starting the worksheet. Once completed the answers provided on the PowerPoint slide mean pupils can either self-assess or peer-assess their work. The next task is a mid-plenary, pupils will need to copy and complete the sentences and then mark their work. The next part of the lesson is on adaptations of alveoli, pupils will copy a table off the board and will each be given a card of information. Either discussing on tables or walking around the room pupils will need to complete their table on the four main features of alveoli which make them efficient gas exchange surfaces. The final activity is an exam-style question worth 6 marks, pupils can close their books and sit in silence to complete this task. Once finished they should mark their work. Plenary task is to write a twitter message about what they have learnt this lesson, including #keywords. All resources are included in the lesson, some are found at the end of the PowerPoint. Please leave a comment if you have any questions, any feedback would be appreciated :)! Thanks!

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW and for higher tier pupils. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an outline of the sorts of stimuli that plants response to - light, moisture & gravity - pupils are asked to think > pair > share why they think that it is important that plants respond to these stimuli. Pupils are then introduced to the term ‘tropism’ and are shown the sort of tropisms plants undergo due to light and gravity. Pupils will then watch a video on this topic and will need to answer questions whilst watching, this work can then be self-assessed once they have finished the video. Pupils will then be provided with posters of information which outlines the role of auxins during phototropism and gravitropism, using this information pupils will need to complete tasks on their worksheet. Once this task has been completed pupils can either self or peer-assess their work using the mark scheme provided. The final activity is an exam-style question which pupils should complete in silence and as an extra challenge they could try and complete it in the back of their books, not using any notes from the lesson. The work can then be self-assessed using the mark scheme provided. The plenary task is for pupils to summarise what they have learnt in three sentences, using the list of key words provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Firstly, students are shown how to ammonia produced in the Haber process is reacted with different acids to form different ammonium compounds before being used in fertilisers. Firstly, students will investigate how to produce ammonium sulphate in the lab - they will be provided with a practical worksheet which they will need to work their way through in pairs. This involves a titration, which they should have carried out before, their results can be recorded in the table provided on the worksheet. Next, pupils will watch a video on the production and use of fertilisers - using the information provided int he video a set of questions needs to be answered. This work can then be self-assessed using the mark scheme provided. Lastly, pupils will be given a set of information about how fertilisers are made in the lab compared to being made by chemical industry. Using this information students will need to complete a comparison table which focuses on starting materials, equipment, safety, yield and running costs. This work can be self-assessed using the mark scheme provided. The plenary task requires pupils to write three quiz questions to test their peers knowledge on what they have learned during the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)