This is a homeschool pack designed for the KS3 Year 8 Science course, specifically the ‘B2.1 Health & Lifestyle’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains eight pages of information, to meet learning objectives within the Year 8 ‘Health & Lifestyle’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Nutrients & Food Tests Unhealthy diet Digestive system Bacteria & enzymes in digestion Bacteria & enzymes in digestion Drugs Alcohol Smoking Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a description of the new field of nanoscience and the types of industries where this may be important. Pupils are then given a set of questions which they must complete using a video, once the students have answered the questions they can assess their work using the mark scheme provided. Pupils will now focus on the importance of surface are to volume ratio when considering nanoparticles, students will calculate the surface area to volume ratio of a cube that is 100cm x 100cm, 10cm x 10cm and 1cm x 1cm. By doing this they can see that the smaller the particle the higher the surface area to volume ratio, this is an important property in nanoparticles - particularly for their use as catalysts. Students are then asked to prove that the same applies for a cube that is 10m x 10m and 0.1cm x 0.1cm. All work from these tasks can be self or peer assessed using the answers provided in the PowerPoint presentation. The next part of the lesson is a task for pupils to consider the application of nanotechnology, pupils will each be given a card of information describing one application of nanoparticles. They will need to walk around the room and discuss the applications with each other to complete a table in their books. The last task is for pupils to consider the potential risks involved with the uses of nanoparticles in everyday products, students should think > pair > share their ideas about how the industries using nanoparticles might be posing risks to people and the environment. Once the class has discussed these potential risks you can outline some examples using the PowerPoint presentation. The plenary is for pupils to pick a task, either write a twitter message or summarise what they learnt in the lesson in three sentences. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This resource contains 22 whole lessons, along with all additional resources, which meet all learning outcomes within the following Year 8 Biology Units: B2.1 Health & Lifestyle B2.2 Ecosystem Processes B2.3 Adaptation & Inheritance This big bundle contains 8-10 weeks worth of lesson content!! The lessons contain a mix of differentiated activities, videos & animations, progress checks and more than two opportunities, per lesson, for self/peer red-pen assessment of tasks. You can find more lesson bundles aimed at the KS3 and KS4 Science curriculum at: https://www.tes.com/teaching-resources/shop/SWiftScience

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by looking at the percentage of different gases in our atmosphere today compared to 3 billions years ago, this then follows into a task whereby pupils will need to walk around the room to read information posters on the evolution of our atmosphere. Using the information they will need to complete a set of questions, this work can be self-assessed using the mark scheme provided. The next part of the lesson focuses on theories of how life evolved on Earth, to begin with students need to ‘Think > Pair > Share’ their ideas about the conditions needed for life on Earth. Once this has been discussed as a class, some of the factors can be revealed on the PowerPoint presentation and one of the theories of how life evolved is outlined, using an animation. Pupils will now complete a mid-lesson progress check, this task can be self-assessed once complete. The next task requires pupils to construct a time-line of events outlining the history of the evolution of the Earth’s atmosphere and life on on Earth given the information they have learned so far this lesson. Pupils can self/peer assess their work using the mark scheme provided in the PowerPoint. The final task is for pupils to discuss their ideas about how carbon dioxide levels decreased so dramatically from being the majority of the Earth’s atmosphere to now only 0.04%. Pupils can mind map their ideas, before the answers are revealed using the PowerPoint. The plenary task is for pupils to complete a 3-2-1 of what they have learned during the lesson - 3 facts, 2 key words and 1 question. All resources are included within the PowerPoint presentation, if you have any questions please email me at swift.education.uk@gmail.com. Any feedback would be greatly appreciated :) Thanks!

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with an introduction to the main functions of the female and male reproductive systems. This then leads into a task whereby students will firstly watch a video on the structure of the female reproductive system, during which they will need to label a diagram. After this, students will watch a video on the structure of the male reproductive system, again students will need to label a diagram whilst watching this video. Students can then mark their work using the mark scheme provided. Next, students will each be given a card of information which describes the function of one part of either the male/female reproductive system. Students will need to walk around the room and share information with each other to complete their own table to summarise each of these functions. The mark scheme for this task is also included so students can either self assess or peer assess their work. The next activity is a progress check task, students will answer a set of levelled questions based upon what they have learned so far this topic. Once this task has been completed, students can mark and correct their own work. Lastly, students will complete an activity whereby they will be required to match the correct reproductive structure with it’s function, students can self-assess their work once complete, using the answers provided. The plenary task is an anagram challenge - students should try to unscramble the words to reveal 6 key words learned over the last two lessons on adolescence and reproductive systems. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to adolescence and puberty, students will be given a card of information which will read as a class before students answer a set of questions. Once this task is complete, students can self-assess their work using the answers provided. Next, students should discuss with their partner the physical changes that could occur to a boy and girl during puberty, their ideas should be noted down as a mind map in their books. Their work can then be checked and corrected using the mark scheme provided. Students will now be given a set of cards describing physical changes which occur in either boys or girls or both, students will need to cut the cards out and stick them into a table in their books. The mark scheme for this task is included for students to self-assess their work. Lastly, students are introduced to the idea of sex hormones which are what cause the changes that occur in boys and girls during puberty. After this, students will be given a set of levelled questions which they should either complete at the back of their books (higher ability) or use their notes from the lesson (lower/middle ability). The plenary task requires students to summarise what they have learned this lesson in three sentences, using as many key words as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.2 ’Elements, Atoms & Compounds’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students are firstly asked to complete a worksheet which is a recap on what they have learned prior to this lesson on the differences between elements, compounds and mixtures. Once this task is complete students can self-assess their work using the mark scheme provided. Next, students are introduced to some of the basic concepts of naming compounds. Students are shown a particle diagram of a carbon monoxide molecule and a carbon dioxide molecule and are asked to ‘Think > Pair > Share’ their ideas about which is which. The answer is then revealed and students are shown that molecules with an atom of one element alongside an oxygen atom are called ‘oxides’, those with one oxygen atom are called monoxides and those with two oxygen atoms are dioxides. Students are now given a table with some information missing out of it, students will need to identify either the name of a compound or the elements that are found within a named compound. Once complete, the task can self-assessed using the mark scheme provided in the PowerPoint presentation. The next part of the lesson focuses on chemical formulae, students are shown what the chemical formula of a substance tells us about that compound, in terms of the relative number of atoms of each element found in that compound. Students will then need to complete a worksheet to assess their knowledge of what they have learned so far this lesson, first part requires students to name the elements found in a set of compounds given the name or the chemical formula. Second task requires students to identify the number of atoms of each elements in a set of compounds. Once this task has been completed, students can self-assess their work using the mark scheme provided. The plenary requires students to write a five minute account of what they have learned this lesson, including what they know now and what they would like to spend more time on. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a video animation on melting and freezing, along with written definitions that students could use to take notes down in their books. This leads into a task whereby students need to explain what is happening to the particle arrangement of a solid as it melts in a liquid, and of a liquid as it turns back into a solid during freezing. Students will watch a video first, then will have a go at coming up with their written explanations. Their answers can then be checked against the ones included in the PowerPoint presentation, students can mark and correct their work. Next, students are introduced to the idea of pure and impure substances are an explanation of how this affects the melting point of a substance is included. Students can investigate the melting point of stearic acid by carrying out a practical investigation, the equipment list and method for this investigation is included on the PowerPoint for students to follow. Their results should be recorded in a suitable table and can be plotted onto graph paper as an extension task. Next, students are given a diagram of the changes of state and are asked to draw a particle diagram for each of the states of matter, to show the transition between the states. This work can be self-assessed using the answers provided. Lastly, students will be asked to complete a ‘Progress Check’ task to assess what they have learned so far this lesson. The mark scheme for this task is included on the PowerPoint. The plenary is a ‘pick a plenary’ task, students can either summarise what they have learned so far this lesson in three sentences or write definitions for a set of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly watch a video on the changes of state, this outlines processes students have covered in previous lessons as well as new processes such as evaporation, condensation and sublimation. Whilst watching the video, students will need to answer a set of questions, this work can then be self-assessed using the mark scheme provided. Students will now need to copy and complete a diagram to demonstrate the changes of state which occur between solids, liquids and gases. This work can be assessed using the mark scheme provided once it is complete. Students are now given an explanation of evaporation using the particle model, students can take notes on this process - including a particle diagram to depict the process. After this students are given a set of statements which either describe the process of boiling or the process of evaporation, students should sort these statements into the correct columns. The answers for this task are included on the PowerPoint for students to assess their work. Students will now be asked to ‘Think > Pair > Share’ their ideas on the factors which could affect the rate of evaporation. Once students have had a chance to discuss their thoughts, they should feed back to the class before the answers are revealed. Lastly is a ‘true or false’ assessment task, students need to read the statements and decide whether they are true or false. This work can be assessed using the mark scheme provided. The plenary requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the process of diffusion, spraying perfume particles in the air is used as an example. Students are shown, by way of a particle diagram, how particles spread from an area of higher concentration to a lower concentration. Students are now asked to ‘copy and complete’ a paragraph to define the process of diffusion, this task can be assessed using the answers provided. Next, students will need to sketch diagrams demonstrating the various stages of diffusion, and will need to match the correct statements to the correct diagrams. This work can be then be self or peer assessed using the mark scheme provided. The next part of the lesson looks at factors that affect diffusion, students are firstly asked to ‘Think > Pair > Share’ their ideas on the factors which might affect the rate of diffusion. After students have fed back into class discussion, the answers are revealed for students to note down in their books. They will then look more closely at the effect of temperature on the rate of diffusion by watching a video and then summarising what they have learned by completing a fill-in-the-blank task. Two other factors which affect the rate of diffusion are particle size and state of matter. Students are shown a diagram and given an explanation for how particle size affects the rate of diffusion - the heavier the particle the slower it is to diffuse. Students are then asked to consider whether particles will diffuse more quickly in the gaseous state, compared to liquid or solid state. Their answers can be discussed in pairs before feeding back to the class, the answers can then be revealed using the mark scheme provided. Lastly, students will need to explain, in terms of particles, why a solid is unable to undergo diffusion whereas a gas and a liquid are able to. The plenary activity requires students to write down 3 facts and 3 key words from the lesson and pose one question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

his lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with the collapsing can demonstration, students are asked to watch the demonstration (either completed by the class teacher or use the video included) and come with with an explanation of what is happening. This activity leads onto a definition for gas pressure, students are given the definition which is explained using the diagram included. Students can take notes of this process in their books, drawing the diagram would also be helpful. Students are now asked to consider whether the factors which may lead to an increase in pressure, students will need to discuss with their partner and come up with some ideas. This leads onto the next PowerPoint slide which outlines three factors - an increase in the number of particles, an increase in temperature or a decrease in the size of the container. All would lead to an increase in the frequency of collisions the particles have with the sides of the container. Students will now complete a worksheet to assess their knowledge of what they have learned so far this lesson. This work can be self-assessed using the mark scheme provided. Next, students are asked to ‘Think > Pair > Share’ their ideas of why an increase in temperature leads to an increase in pressure. Students should try to explain their answer using the particle. model, students can discuss in pairs before writing their thoughts down and then feeding back to the class as group discussion. The answer to this task can then be revealed, students can check and correct their work. Lastly, students will complete a ‘Teach me, tell me’ task - students will be given a Q&A card, as well as a worksheet of questions. They will need to share the answer to their question with other students in the classroom in order to complete the worksheet of questions on gases & pressure. The plenary task requires students to write a Whatsapp message on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology. Included in this resource is a ‘revision placemat’ for Ecology. Concepts covered include: adaptation, food chains, taxonomy, and decomposition. Pupils will also discuss carbon dioxide in the atmosphere, acid rain, deforestation, and eutrophication. There are 16 revision questions in total. Pupils may use their books if necessary but should test their knowledge by attempting to answer all questions from memory first. The solution for this activity is also included so you can check their answers, or they may self-assess. Thanks for looking, if you have any questions, please let me know in the comments section and any feedback would be appreciated :) For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience

This lesson is designed for the NEW AQA Biology GCSE, particularly for the higher tier for the 'Infection & Response ’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a starter discussion to remind students about communicable disease, and which bacteria are harmful. The next slides introduce and define pathogens, and some harmful and non-harmful bacteria. They will then watch a short video which explains the differences between viruses and bacteria then complete a Venn diagram task. The next task is a true/false activity to complete as a class and asses their understanding thus far. Students are then directed to work in pairs to make a mind map in their books describing how pathogens are spread. Students will then be instructed to work on their own to answer three questions about pathogens spreading. Answers are on the following slide for self-assessment. The plenary task is an exam style question, students can self-assess to the mark scheme on the last slide. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a video displaying the short-term and long-term effects of alcohol on the body. Students can watch the video and whilst watching create a mind map of the different effects, this work can then be self-assessed using the mark scheme provided. Next, the effect of alcohol on the liver and brain are specifically highlighted using the PowerPoint presentation, students will then need to compete a fill-in-the-blank task to highlight these specific risks. Again, the answers to this task are included in the PowerPoint presentation for students to self-assess and correct their work. Students are now shown some data and will need to answer a set of questions based on this data, the mark scheme for this task is included in the PowerPoint for students to mark and correct their work. The last part of the lesson focuses on the effect of alcohol on pregnant women and their unborn child. Students will watch a video, during which they will need to answer a set of questions. This work can then be self-assessed using the mark scheme provided. The plenary task requires students to write a twitter message about what they have learned this lesson, students should include #keywords from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with some facts and figures about the rates of smoking around the world, how many cigarettes are smoked daily and the different chemicals found in cigarette smoke and which of these are linked with disease. Students will now watch a video on the chemicals found in cigarette smoke and the damage these chemicals can do to the body, whilst watching the video students will need to answer a couple of questions. The answers to these questions are then revealed using the PowerPoint, students can self-assess their work. Students will now watch another video on smoking and the effect on your health, students will be given a set of questions that they will need to answer using the video. Once this task is complete, students will self-assess their work using the mark scheme provided. The latter part of the lesson involves an activity whereby students will be given a worksheet of questions, there will be information posters placed around the room which students will need to use to answer questions on their worksheet. The mark scheme for this task is included in the PowerPoint presentation for students to peer-assess their work with their partners. The last task is for partners to complete a ‘feedback quadrant’ of their partners work, this includes a positive comment, something they missed out which should have included and a question to test their understanding of the lesson content. The plenary activity requires students to complete a 3-3-1 reduction - 3 facts, 3 key words and then reduce this to 1 key word from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with students being introduced to a distance-time graph, an example is given along with a description of what a distance-time graphs shows. Students are asked to ‘Think > Pair > Share’ their ideas about what a horizontal line on the graph shows. Students will be given a hand-out of the distance-time graph showing Phil’s route around a race track. Students will be asked to complete a set of questions about using information from this graph, this task can be self-assessed using the mark scheme provided. Students will now be asked to produce their own distance-time graphs by getting into groups of three and measuring the distance one student walks and the time it takes. Students will need to use the graph to work out when his/her partner was walking the fastest, and will need to calculate his/her average speed at this point. Next, students will watch a video on acceleration, whilst watching the video students will complete a set of questions. This work can be self-assessed using the mark scheme provided once it is complete. Lastly, students will use a distance-time graph to complete an exam-style question. This task can be self or peer assessed using the mark scheme provided once students have completed it. The plenary task requires students to write three quiz questions to test peers knowledge of what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with students identifying the speeds of different animals, from a list provided. Students are then asked to think about the measurements needed to calculate speed, they will be then be shown a worked example of how to calculate speed; students can take notes on this in their books. Students will now be shown how to use a formula triangle to calculate either speed, distance or time and will be given the definition for ‘mean/average speed’ - they can also make a note of this in their books. Students will now complete a ‘quick check’ task, a set of questions based upon what the students have learned to far this lesson. This task can then be self-assessed using the mark scheme provided. Next, students will complete an investigation to calculate the walking speed of two students in their group. One student will walk a slow speed and one students will walk a fast speed, over a set distance, whilst the third member of the group records the time. Results can be recorded in table in their books, students can then complete a distance-time graph of their results. Lastly, students are introduced to the idea of relative motion through a ‘Think>Pair>Share’ task. The plenary task requires students to complete a 3-3-1 reduction of what they have learned this lesson, this includes 3 facts, 3 key words reduced to 1 key words. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Motion & Pressure’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a demonstration - the collapsing can. Students should hopefully be able to identify that the can that collapsed had a lower pressure inside the can than outside the can, causing the can to collapse inwards. This leads into a description of gas pressure, including a diagram to help demonstrate the concept. Students will now ‘Think > Pair > Share’ their ideas about what could cause an increase in pressure, after a short discussion the answers will be revealed to students - increasing the number of particles and increasing the temperature or reducing the size of the particles. Students will now complete a task based upon what they have learned so far this lesson, this can be self-assessed using the mark scheme provided. Students will now complete an investigation called ‘What makes a ball bouncy?’. Students will investigate whether a ball becomes more bouncy the more/less pumps of air it has in it. Students will copy the table of results into their books, draw a graph of their results and complete analysis questions. This task can be self-assessed once complete. Lastly, students are introduced to the idea of atmospheric pressure and shown a diagram which represents the density of air particles at the top of the mountain compared to the bottom. The plenary task requires students to complete one of the sentence starters in their books to summarise what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This is a homeschool pack designed for the KS3 Year 7 Science course, specifically the ‘P1.4 Space’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains four pages of information, to meet learning objectives within the Year 7 ‘Space’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: The night sky The Solar System The Earth The Moon Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P1 ’Forces’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a recap on the differences between contact and non-contact forces. Students are given a list of forces and a variety of pictures, they need to match the correct name of the force with the correct picture and decide whether this is a contact or non-contact force. This task can self-assessed using the mark scheme provided. Students are now introduced to the concept of a ‘reaction force’, with examples of a ball hitting the floor and a person walking along the ground. Students are shown a particle diagram to demonstrate what is happening. Next, students are introduced to the idea of an elastic cord or spring being affected by ‘extension’ and ‘tension’ forces. To assess students knowledge of what they have learned so far they will complete a progress check, a set of questions which students can answer in their books. This task can then be self-assessed using the mark scheme provided. The last part of the lesson will look at Hooke’s law, students will conduct an investigation where they will investigate Hooke’s law. This practical involves students adding 1 Newton weights to a hanger which is attached to an elastic band. Every time a new weight is added, the distance between two marked point on the elastic band is measured. Students should carry out the investigation, record their results in a the table and then plot a graph of their results. Hopefully, students will draw a linear graph and be able to identify what Hooke’s law is from their results. Students can check their work against the results provided in the PowerPoint. Finally, students are asked to complete a ‘Sentence Link-Up’ task, this is a literacy task which requires students to link three words in a summary sentence. This work can be self-assessed once it is complete using the answers provided on the PowerPoint. The plenary requires students to write three quiz questions to test their knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)