![Hero image](https://d2w4qhtqw2dbsq.cloudfront.net/store_live/1968648/imageHero.jpg?_=1494796680215)
240Uploads
87k+Views
53k+Downloads
All resources
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science Trilogy Physics Paper 2 Revision and 2019 Exam Support
All spec codes must be examined through a three-year period with AQA exams. This is a spec code frequency analysis of the 2018 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in last year’s exams or very infrequently, leading to a very high probability of most of them appearing in summer 2019. (Some spec point could be assessed in 2020 and still meet the three-year rule.)
This tool has analysed 2018 foundation and higher exam papers and completed a frequency count of each spec code. This summarises into a combined table to prepare for the 2019 exams.
It highlights spec codes that have not been assessed by showing as green. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups.
Each analysis is shown graphically leading to easy displays for pupils to review key areas to focus.
On the following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers.
Exam questions have been made into a F and H assessment/revision document from AQA past papers and has been made specifically themed on these areas to help support and lead revision up to the summer exams. All markschemes and examiner reports are included.
Hopefully this will lead to a more productive approach, in terms of revision topics and time management, for both pupils and teachers.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science Trilogy: 4.3 Infection and Response
A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 4.3.1.1-4.3.1.9
A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle.
All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science Trilogy Chemistry Paper 2 Revision and 2019 Exam Support
All spec codes must be examined through a three-year period with AQA exams. This is a spec code frequency analysis of the 2018 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in last year’s exams or very infrequently, leading to a very high probability of most of them appearing in summer 2019. (Some spec point could be assessed in 2020 and still meet the three-year rule.)
This tool has analysed 2018 foundation and higher exam papers and completed a frequency count of each spec code. This summarises into a combined table to prepare for the 2019 exams.
It highlights spec codes that have not been assessed by showing as green. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups.
Each analysis is shown graphically leading to easy displays for pupils to review key areas to focus.
On the following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers.
Exam questions have been made into a F and H assessment/revision document from AQA past papers and has been made specifically themed on these areas to help support and lead revision up to the summer exams. All markschemes and examiner reports are included.
Hopefully this will lead to a more productive approach, in terms of revision topics and time management, for both pupils and teachers.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
B2: AQA Additional Biology Revision and 2017 Exam Support.
All spec codes must be examined through a three year period with AQA exams. This is a spec code frequency analysis of 2015-16 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in the last two years leading to a very high probability of them appearing in summer 2017.
This tool has analysed 2016 and 2015 exam papers and completed a frequency count of each lettered spec code. This summarises into a combined table to prepare for the 2017 exams.
It highlights lettered spec codes that have not been assessed in the last two years by showing as green. Being the last year of AQA Additional exams before the 1-9 exams there is a very high probability of possible topics that will appear in the summer exams. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared in the last two years relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups.
Each analyse is shown graphically leading to easy displays for pupils to review key areas to focus.
On following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers.
A F and H revision pack is then included with past exam question specifically themed on these areas to help support and lead revision up to the summer exams. Mark schemes and examiners reports are included for these questions.
The aim of the support pack is to help prepare for the summer exams of 2017. This is a very unique situation where we can have a good chance of using this analyse to target revision and focus the pupils.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
C2: AQA Additional Chemistry Revision and 2017 Exam Support.
All spec codes must be examined through a three year period with AQA exams. This is a spec code frequency analysis of 2015-16 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in the last two years leading to a very high probability of them appearing in summer 2017.
This tool has analysed 2016 and 2015 exam papers and completed a frequency count of each lettered spec code. This summarises into a combined table to prepare for the 2017 exams.
It highlights lettered spec codes that have not been assessed in the last two years by showing as green. Being the last year of AQA Core exams before the 1-9 exams there is a very high probability of possible topics that will appear in the summer exams. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared in the last two years relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups.
Each analyse is shown graphically leading to easy displays for pupils to review key areas to focus.
On following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers.
A F and H revision pack is then included with past exam question specifically themed on these areas to help support and lead revision up to the summer exams. Mark schemes and examiners reports are included for these questions.
The aim of the support pack is to help prepare for the summer exams of 2017. This is a very unique situation where we can have a good chance of using this analyse to target revision and focus the pupils.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science Trilogy: 6.5.4.1 Describing Motion Along a Line
A set of resources mapping to spec codes from the new AQA Combined Science Trilogy 6.5.4.1.1-6.5.4.1.5
A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle.
All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science Trilogy: 6.6.2 Electromagnetic Waves
A set of resources mapping to spec codes from the new AQA Combined Science Trilogy 6.6.2.1-6.6.2.4
A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle.
All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Foundation Physics Paper 1
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Higher Physics Paper 1
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Foundation Chemistry Paper 2
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Higher Chemistry Paper 2
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Higher Chemistry Paper 1
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Foundation Chemistry Paper 1
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Higher Biology Paper 1
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Foundation Biology Paper 2
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Higher Biology Paper 2
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Higher Physics Paper 2
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
AQA Combined Science All Specification Review: Foundation Physics Paper 2
If you’ve ever wanted to be able to guarantee that your pupils are reviewing all areas of the course, then this resource should help. The “All Spec Review”
(I have a free resource for Foundation Biology Paper 1 that will enable you to see what this pack contains)
Before a full paper is completed by your pupils you will likely revise the different chapters within the assessment paper. But how do you check they understand or how do they?
This questions pack contains past exam questions that meet every specification point for the tier and paper being reviewed.
I have analysed every question from every past paper to collate which question meets which specification points. From this analyse I have put together a question pack that the pupil can work through that is guaranteed to cover every specification point at least once, if not a few times. Using AQA exam timings these booklets contain at least a couple of hours of work. Broken down with revision, or completed open book, this could be many hours of work in class or at home.
This resource contains a PowerPoint slide to put up that has the breakdown of question versus spec point. It then has a teacher version with questions, markscheme and examiner report and a pupil version with just questions. At the start of the pack there is a review table for the pupils to keep track of questions and specification points they are strong or weak in.
Hope this helps and builds to a full review of everything needing to be covered.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
P1: AQA Core Physics Revision and 2017 Exam Support.
All spec codes must be examined through a three year period with AQA exams. This is a spec code frequency analysis of 2015-16 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in the last two years leading to a very high probability of them appearing in summer 2017.
This tool has analysed 2016 and 2015 exam papers and completed a frequency count of each lettered spec code. This summarises into a combined table to prepare for the 2017 exams.
It highlights lettered spec codes that have not been assessed in the last two years by showing as green. Being the last year of AQA Core exams before the 1-9 exams there is a very high probability of possible topics that will appear in the summer exams. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared in the last two years relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups.
Each analyse is shown graphically leading to easy displays for pupils to review key areas to focus.
On following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers.
A F and H revision pack is then included with past exam question specifically themed on these areas to help support and lead revision up to the summer exams. Mark schemes and examiners reports are included for these questions.
The aim of the support pack is to help prepare for the summer exams of 2017. This is a very unique situation where we can have a good chance of using this analyse to target revision and focus the pupils.
![WHAM_Education](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/1968648/small.jpg)
C1: AQA Core Chemistry Revision and 2017 Exam Support.
All spec codes must be examined through a three year period with AQA exams. This is a spec code frequency analysis of 2015-16 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in the last two years leading to a very high probability of them appearing in summer 2017.
This tool has analysed 2016 and 2015 exam papers and completed a frequency count of each lettered spec code. This summarises into a combined table to prepare for the 2017 exams.
It highlights lettered spec codes that have not been assessed in the last two years by showing as green. Being the last year of AQA Core exams before the 1-9 exams there is a very high probability of possible topics that will appear in the summer exams. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared in the last two years relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups.
Each analyse is shown graphically leading to easy displays for pupils to review key areas to focus.
On following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers.
A F and H revision pack is then included with past exam question specifically themed on these areas to help support and lead revision up to the summer exams. Mark schemes and examiners reports are included for these questions.
The aim of the support pack is to help prepare for the summer exams of 2017. This is a very unique situation where we can have a good chance of using this analyse to target revision and focus the pupils.