Powerpoint designed to cover the required theory for new methods of manufacture. 3 exam questions are also included. 15 slides - lesson includes maths starter, questions for show-me-tell-me boards and consolidation activity.

Double sided A4 which works in conjunction with ANY of the Richard Hammond Engineering Connections video (they are all on YouTube and last around 45 minutes). This handout encourages note making (mind map style) during the video, then guides students through first some concept designs and then a final design whereby they must apply the engineering principles covered in the film. Great for a longer cover lesson with a non specialist.

A worksheet based on a Lego Mini Build of a D&T Workshop. Children are tasked with drawing up the photographed model in isometric. At the top of the page I have modeled this task in simple steps. To draw, use thick/thin lines, and then render the models should take around an hour per sheet. File enclosed is a printable PDF and accompanying jpeg. I have other sheets available in this series, or a compilation package too.

Every year I make a countdown calendar for year 11, which commences the day after Easter holidays (when the NEA is complete - or hopefully is!). It’s 3 sheets of A4 that I encourage them to pin up at home in the kitchen. Then I request that they answer one question every day whilst they are making their breakfast. It often inspires them to look deeper into the keywords which invariably brings about deeper revision elsewhere in their week. It’s always a success with the students. A printable PDF along with the original Powerpoint are included, so you can edit the questions. There is a theory slide in there too, (linked to the EEF research) that goes through the best revision methods in a D&T context. The questions are set up for the AQA exam, but the questions would work with any exam board! Tes paid lice

Double sided A4 self directed cover lesson. Children design a new mobile phone and associated operating system, then design a quick start guide instruction leaflet for new users. The focus is on UCD, and instructional graphics.

Can be printed double sided on A4, and will fill around 1.5 hours to 2 hours. Children go through a cut down design cycle in designing a hand / head torch. Hand out guides them through consideration such as buttons etc.

A couple of worksheets based on Lego Mini Vehicles (simple Lego models). Children are tasked with drawing up the photographed model in isometric. At the top of the page I have modeled this task in simple steps. To draw, use thick/thin lines, and then render the models should take around an hour per sheet. File enclosed is a printable PDF and accompanying jpeg. I have other sheets available in this series, or a compilation package too.

A couple of worksheets based on Lego Mini Vehicles (simple Lego models). Children are tasked with drawing up the photographed model in isometric. At the top of the page I have modeled this task in simple steps. To draw, use thick/thin lines, and then render the models should take around an hour per sheet. File enclosed is a printable PDF and accompanying jpeg. I have other sheets available in this series, or a compilation package too.

A worksheet based on Lego Mini Vehicles (simple Lego models). Children are tasked with drawing up the photographed model in isometric. At the top of the page I have modeled this task in simple steps. To draw, use thick/thin lines, and then render the models should take around an hour per sheet. File enclosed is a printable PDF and accompanying jpeg. I have other sheets available in this series, or a compilation package too.

A couple of worksheets based on Lego Mini Vehicles (simple Lego models). Children are tasked with drawing up the photographed model in isometric. At the top of the page I have modeled this task in simple steps. To draw, use thick/thin lines, and then render the models should take around an hour per sheet. File enclosed is a printable PDF and accompanying jpeg. I have other sheets available in this series, or a compilation package too.

Imagine that you have had a power cut at home and in your local area. Imagine that the power cut has lasted a number of days and you don’t know when the electricity is going to be reconnected. Imagine that cells (batteries) had not yet been invented. What would life be like? Work sheet can be printed double sided on A4, and will fill around an hour and a half to two hours.

A4 guide sheet (blank A3 also needed), which guides children through a mindmap, specification ahead of designing their own seating (and then drawing up in orthographic) Great cover for any KS3 class.

A 17 slide powerpoint, which covers all key information on 3D printing (and also as a tag on, EPOS/PPC) Lesson starts with spaced retrieval (mechanisms this time), and consolidates with definitions.

A 30 slide PowerPoint covering all necessary designers for AQA A-level Design & Technology. Lesson begins with spaced retrieval questions, and a connect activity. It concludes with two exam questions with mark scheme. Each designer has a potted history, examples of their iconic products and key notes as to their styles.

A great cover lesson which can easily be set to cover around 2 hours with a non specialist (but could easily be reduced in challenge to an hour). Two single sheets of A4 are required to be copied in advance, but otherwise only scissors (and rulers if desired) are needed. The work is self contained and comes with explanation. There is an accompanying powerpoint with bigger instruction pictures if desired, but isn’t necessary. There is an extension task too. Works well with Y7/8/9, and gains pleasing results with interest throughout.

An editable (using powerpoint) or printable template for whole school SWOT analysis. Sheet includes prompts.

A 19 slide powerpoint, which covers all key information on Design for Maintenance, Repair and Disposal. 6 R’s, Upcycling, strategies for disassembly, design for durability etc. Lesson starts with spaced retrieval (maths this time), and consolidates with 2 exam questions (with mark scheme). Includes video, and practical session disassembling a mouse/keyboard (normally I find a broken one from ICT).

18 slide Powerpoint, including opening maths question (retrieval) and a connection question. Powerpoint then goes through the various tests (Tensile, Toughness, Hardness and then non destructive options - Ultrasound and Radiographic / X-rays). Each process covers key words, definitions, diagrams and videos of the tests in process. The lesson concludes with 2 exam questions (with mark scheme). This lesson is designed as a complimentary lesson to the one with identical name but “(in school)” at the end.

A 17 slide powerpoint covering material testing in readiness for NEA. This focusses on testing techniques you can easily do in school (tensile, hardness, toughness, energy (heat) transfer etc. Within the powerpoint are photographs and videos of each test taking place in the workshop (they are made by me - not just a youtube video). The theory works as a standalone presentation, but if you wanted to make your own testing rigs, I have made a few simple contraptions to make testing more controlled which are also shown in the powerpoint photos/videos in use - all 3 would be easy to make in any DT workshop in a few hours. There is an accompanying handout for recording any practical tests that students do. Always one of the favourite lessons of year 10, and they get to complete a piece of NEA in the process too! As with all my lessons, they come with a key question to begin and relevant exam questions (with mark scheme) to conclude.

A 17 slide powerpoint covering material testing in readiness for NEA. This focusses on testing techniques you can easily do in school (tensile, hardness, toughness, energy (heat) transfer etc. Within the powerpoint are photographs and videos of each test taking place in the workshop (they are made by me - not just a youtube video). The theory works as a standalone presentation, but if you wanted to make your own testing rigs, I have made a few simple contraptions to make testing more controlled which are also shown in the powerpoint photos/videos in use - all 3 would be easy to make in any DT workshop in a few hours. There is an accompanying handout for recording any practical tests that students do. Always one of the favourite lessons of year 12, and they get to complete a piece of NEA in the process too! As with all my lessons, they come with a retrieval exercise to begin and relevant exam questions (with mark scheme) to conclude.