A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
This lesson explains the law of conservation of mass and applies this law to a closed system and a non-enclosed system. The PowerPoint and accompanying resources have been designed to cover point 1.48 of the Edexcel GCSE Chemistry specification and also covers that point in the Chemistry section of the Combined Science course.
The lesson begins by introducing the law of the conservation of mass. Students will learn that they can expect questions which challenge them to prove that mass is conserved through the use of the relative formula mass. Therefore, the next section of the lesson focuses on the skills associated with this calculation and looks at more different formulae such as those with brackets. Students are given an opportunity to check their skills before trying to prove mass is conserved in three chemical reactions. All questions have displayed mark schemes so that students can assess their understanding. The rest of the lesson looks at instances of when the mass of the reactants does not equal the mass of the products. A practical method for the decomposition of copper carbonate is provided if the teacher wants to use it, so that students can collect results which show this difference in mass. Discussions are encouraged in order to get students to offer explanations as to why the mass of the products is lower. Once the gas has been identified, students are further challenged to consider apparatus that could be used to collect and record the results to again prove conservation
This lesson describes how to calculate the relative formula mass from simple chemical formulae and for those that include brackets. The PowerPoint and the accompanying worksheet have been designed to cover point 1.43 of the Edexcel GCSE Chemistry specification and also covers that point in the Chemistry section of the Combined Science course.
The lesson contains a wide range of tasks, understanding checks and quick quiz competitions to guide students through calculating the relative formula mass for substances with a range of chemical formulae. The relative formula mass is required in a lot of calculations, such as those that involve moles, so it is an important skill to get right. Worked examples are used throughout the lesson to visualise the metho for the students. Initially, students will learn how to calculate the mass from simple formulae before helpful hints are provided for harder formulae such as those that contain a bracket. Students are given the chance to apply their knowledge by proving that mass is conserved in a reaction and this prepares them for an upcoming lesson.
This lesson has been written for GCSE students but could be used with higher ability KS3 students in lessons that are looking to push knowledge forward
This lesson describes how the chemical formula of an ionic compound can be deduced using the formulae of the constituent ions. The PowerPoint and accompanying worksheet have been designed to cover point 1.26 of the Edexcel GCSE Chemistry specification and also cover the same point in the Chemistry section of the Combined Science course.
This lesson builds on the knowledge acquired in previous lessons when students learnt how to identify the charge of an ion based on the group of the atom. A step by step guide is used to show them how the transfer method can be used to write the formulae for compounds including halides and oxides. Time is taken to introduce the formulae for sulphate, carbonate, hydroxide and nitrate ions and the students are shown how brackets may be needed when writing formulae for compounds containing these ions. Understanding checks in the form of questions and quiz competitions are used to allow the students to assess their progress
This lesson explains how to use the endings -ide and -ate when naming compounds. The lesson PowerPoint and accomapnying worksheet have been designed to cover point 1.25 of the Edexcel GCSE Chemistry specification and also covers that point in the Chemistry section of the Combined Science course
The lesson begins with some simple multiple choice questions to check that students can spot the chemical symbol and definition of an element, but more importantly pick out the formula for a compound. Time is taken to go through the explanation of why substances are elements or compounds and specific examples given. A quick understanding check, in the form of a competition called “To COM or NOT TO COM”,is used to check that students can identify elements or compounds from a name or given formula. The remainder of the lesson focuses on naming compounds. Students are challenged to spot a pattern when presented with the names of two compounds, which contain 2 elements only. For both compounds that contain 2 elements or 3 or more, the rules to naming are introduced before examples are shown so that students can visualise how to construct their answer. They are then given an opportunity to apply this to a number of questions in the set tasks. The last part of the lesson moves this forward by looking at how these same rules can be applied when the chemical formula of a compound is given and this is related to another topic as they are challenged to write a word equation containing a range of compounds when presented with the symbol equation. Progress checks are written into the lesson at regular intervals so that students can constantly assess their understanding.
Although this is written for Edexcel GCSE students, it is perfectly suitable for use with younger students who are learning about elements, compounds and mixtures and the teacher wants to push them onwards
This lesson describes an ion as an atom with a positive or negative charge, and explains how cations and anions are formed in ionic compounds. The lesson PowerPoint and accompanying worksheet have been designed to cover points 1.22 - 1.24 of the Edexcel GCSE Chemistry specification and also covers the same points on the Combined Science course.
The first part of the lesson focuses on atoms and specifically on getting students to recall that they contain the same number of protons and electrons and this is why they have no overall charge. By ensuring that they are confident with this fact, they will be able to understand why ions have a charge. Students will learn that ions have full outer shells of electrons and this change in the number of this sub-atomic particle leads to the charge. They are shown examples with aluminium and oxide ions and then are challenged to apply this new-found knowledge to a task where they have to explain how group 1, 2, 5 and 7 atoms become ions. The final part of the lesson looks at how ion knowledge can be assessed in a question as they have to recognise the electron configuration of one and describe how many sub-atomic particles are found in different examples. There are regular progress checks throughout the lesson to allow the students to check on their understanding.
This lesson has been written for GCSE students but could be used with higher ability KS3 students who are looking to extend their knowledge past basic atomic structure
This lesson explains how ionic bonds are formed to form ions and describes the structure of an ionic compound. The engaging lesson PowerPoint and accompanying resources have been designed to cover points 1.21 and 1.27 of the Edexcel GCSE Chemistry specification and this also covers those points on the Combined Science specification.
The lesson begins by introducing the name of the type of bond, but does not go into any more detail at this stage. This is because the lesson is designed to allow the students to discover that in order for both of the atoms involved to get a full outer shell, electrons have to be transferred from one to the other. Over the course of the lesson, students will recognise that it is the metal that loses the electrons and becomes a positive ion whilst the non-metal gains the electrons and becomes a negative ion. There are lots of discussion and discovery points like this written into the lesson so that students can take ownership for their learning. Students are guided through drawing dot and cross diagrams to represent these compounds and as a result links are made to the topics of naming compounds, writing chemical formulae, forming ions and electron configurations. There are a number of quick competitions in the lesson which introduce new terms to the students. One such competition introduces the term lattice and the lesson builds from here to understand why ionic compounds have high melting and boiling points. Moving forwards, students will also learn that solid ionic compounds cannot conduct electricity whilst those in molten form or in an aqueous solution are able to. The final task of the lesson challenges the students to bring all of the information together they have seen to draw a dot and cross diagram for aluminium oxide, explain how it was formed and then explain how aluminium is extracted from this compound by electrolysis. This final task has been differentiated so that students who need extra assistance can still access the learning.
This lesson has been written for GCSE aged students but could be used with higher ability younger students who are pushing on with the elements, compounds and mixtures topic
The detailed content, exam-style questions, guided discussion points and quiz competitions that are found in each of the 16 paid lessons that are included in this bundle (as well as the 5 free lessons which are named at the bottom) cover the following specification points in module 4 of the OCR A-level Biology A specification:
Module 4.1.1
The different types of pathogen that can cause communicable diseases in plants and animals
The means of transmission of animal and plant communicable pathogens
The primary non-specific defences against pathogens in animals
The structure and mode of action of phagocytes
The structure, different roles and modes of action of B and T lymphocytes in the specific immune response
The primary and secondary immune responses
The structure and general functions of antibodies
An outline of the action of opsonins, agglutinins and anti-toxins
The differences between active and passive immunity, and between natural and artificial immunity
Autoimmune diseases
The principles of vaccination
Module 4.2.1
How biodiversity can be considered at different levels
The random and non-random sampling strategies that are carried out to measure the biodiversity of a habitat
How to measure species richness and species evenness
The use and interpretation of Simpson’s Index of Diversity
How genetic biodiversity may be assessed
The ecological, economic and aesthetic reasons for maintaining biodiversity
In situ and ex situ methods of maintaining biodiversity
International and local conservation agreements made to protect species and habitats
4.2.2
The biological classification of species
The binomial system of naming species and the advantage of such a system
The features used to classify organisms into the five kingdoms
The evidence that has led to new classification systems
The different types of variation
Using the standard deviation to measure the spread of a set of data
Using the Student’s t-test to compare means of data values of two populations
Using the Spearman’s rank correlation coefficient to consider the relationship of the data
The different types of adaptations to their environment
The mechanism by which natural selection can affect the characteristics of a population over time
How evolution in some species has an impact on human populations
If you would like to get an idea of the quality of the lessons that are included in this bundle, then download the following five OCR A lessons which have been uploaded for free:
Immunity & vaccinations
Reasons for maintaining biodiversity
Taxonomic hierarchy and the binomial naming system
Adaptations and natural selection
Transmission of animal and plant pathogens
This bundle contains 8 detailed and engaging lessons, and together they cover a lot of the key content of topic 17 in the CIE A-level Biology specification. Selection and evolution are key processes in Biology but are not always well understood or well explained by students. With this in mind, these lessons have been designed to support students in making links between the different concepts.
The following specification points are covered by these lessons:
The differences between continuous and discontinuous variation
Using the t-test to compare the variation of two different populations
The importance of genetic variation in selection
Natural selection
Environmental factors can act as stabilising, disruptive and directional forces in natural selection
Selection, the founder effect and genetic drift affect allele frequencies in populations
Using the Hardy-Weinberg principle
The molecular evidence that reveals similarities between closely related organisms
Allopatric and sympatric speciation
If you would like to sample the quality of lessons in this bundle then download the following lessons as these have been shared for free
continuous and discontinuous variation
molecule evidence and evolution
This lesson describes how molecular evidence can be used to reveal similarities between closely-related organisms. The PowerPoint and accompanying resources have been primarily designed to cover point 17.3 (b) of the CIE A-level Biology specification and focus on the comparison of protein structure and mitochondrial DNA but can also be used as a revision of related topics that include protein synthesis and gene mutations.
The lesson begins with the introduction of convergent evolution, a process where organisms independently evolve to have similar features due to theeir habitation of similar environments. This allows the importance of molecular evidence to be considered to ensure that organisms which are closely related (in terms of evolution) are recognised. The comparison of the primary structure of a protein involved in respiration (cytochrome c) is used to demonstrate how protein sequence data can be useful. At this point, a series of exam-style questions are used to challenge the students on their knowledge of protein synthesis and gene mutations from topics 6 and 16. The remainder of the lesson considers the use of mitochondrial DNA and a study of the mtDNA genomes of 51 gibbons demonstrates how this can provide evidence of relationships, even in organisms that show high taxonomic diversity like these lesser apes.
This lesson bundle contains 3 lessons which have been intricately planned to build on the knowledge acquired in the previous lesson and in earlier topics of the course to allow students to gain a deep understanding of classification. The lesson PowerPoints and accompanying resources contain a wide range of tasks which will engage and motivate the students whilst all of the content of topic 18.2 of the CIE A-level Biology specification is covered as detailed below:
Describe the classification of species into the taxonomic hierarchy of domain, kingdom, phylum, class, order, family, genus and species
The characteristic features of the three domains
The characteristic features of the kingdoms
The classification of viruses, separate to the three-domain model of classification of cellular organisms
If you would like to sample the quality of the lessons in this bundle, then download the “features of the kingdoms” lesson as this has been shared for free
This lesson describes the characteristic features of the three domains and explains why viruses are not included in this classification. The PowerPoint and accompanying resources have been primarily designed to cover points 18.2 (b) & 18.2 (d) of the CIE A-level Biology specification but also contains tasks that challenge the students on their knowledge of taxonomic hierarchy from this topic and the features of virus from topic 1.
The lesson begins with an introduction of the microbiologist Carl Woese and goes on to describe how he is most famous for his definition of the Archaea as a new domain of life. Students were introduced to domains and the other classification taxa in the last lesson, so their recall of this knowledge is continually tested and built upon as details are added. Students will discover the key differences between Archaea and Bacteria that led to the splitting of the prokaryotae kingdom and the addition of this higher classification rank and will understand that it wasn’t until 13 years after the discovery that it was adopted. Moving forwards, the rest of the lesson explains why viruses are not included in this classification and outlines how they are classified, according to the ICTV, through the type of nucleic acid they contain and whether this is single-stranded or double-stranded
This lesson explains that biodiversity is considered at three levels and describes how the Simpson’s Index of Diversity is used to calculate the biodiversity within a habitat. The engaging and detailed PowerPoint and accompanying resources have been designed to cover points 18.1 (a, b & f) of the CIE A-level Biology specification and also covers the meaning of ecosystems and niche as well as some other important ecological terms that are related such as abiotic factors and population.
A quiz competition called BIOLOGICAL TERMINOLOGY SNAP runs throughout the lesson and has been included to engage the students whilst challenging them to recognise key terms from their definitions. This quiz will introduce species, ecosystems, biodiversity, endemic, heterozygote, distribution and natural selection and each of these terms is put into context once introduced. A series of exam-style questions to challenge the students to explain how the distribution of fish is affected by abiotic factors in an ecosystem. Once biodiversity is revealed through the quiz competition, the students will learn that they need to consider biodiversity within a habitat, within a species and within different habitats so that they can be compared. The rest of the lesson uses step by step guides, discussion points and selected tasks to demonstrate how to determine species richness and the Simpson’s index of diversity. The heterozygosity index is also introduced as a means to consider genetic variation. Students are challenged with a range of exam-style questions where they have to apply their knowledge and all mark schemes are displayed and clearly explained within the PowerPoint to allow students to assess their understanding and address any misconceptions if they arise
This is a detailed lesson with a lot of tasks (some of which are differentiated), so it is estimated that it will take in excess of 2 hours of allocated A-level teaching time to cover all of the content
All 10 lessons included in this bundle are highly detailed and are fully-resourced. The lesson PowerPoints and their accompanying worksheets contain a wide range of tasks that will engage and motivate the students whilst covering the following specification points as set out in topic 4 of the Edexcel International A-level Biology specification:
The structure and ultrastructure of plant cells
The function of the organelles in plant cells
The structure and function of starch and cellulose
The similarities and differences between the structures, position and functions of sclerenchyma, xylem and phloem
The importance of water and inorganic ions in plants
Understand that classification is a means of organising the variety of life based on relationships between organisms
New taxonomic groupings
The meaning of the terms biodiversity and endemism
Know how biodiversity can be measured within a habitat and within a species
Comparing biodiversity between habitats using the index of diversity
The adaptations of organisms to their environment
Use of the Hardy-Weinberg equation
Changes in allele frequency are the result of mutation and natural selection
Evaluate the methods used by zoos and seed banks in the conservation of endangered species and their genetic diversity
If you would like to sample the quality of lessons in this bundle then download the cellulose & starch and modern-day classification lessons as these have been uploaded for free
This lesson describes the evidence that led to the three-domain model of classification as an alternative to the five-kingdom model. The detailed PowerPoint and accompanying resources have been designed to cover point 3.1 (vii) of the Edexcel A-level Biology B specification and focuses on Carl Woese’s detailed study of the ribosomal RNA gene and the need for this evidence to be validated by the scientific community
The lesson begins with an introduction of Woese and goes on to describe how he is most famous for his definition of the Archaea as a new domain of life. Students were introduced to domains and the other classification taxa in a lesson at the start of this topic, so their recall of this knowledge is continually tested and built upon as details are added. Students will discover the key differences between Archaea and Bacteria that led to the splitting of the prokaryotae kingdom and the addition of this higher classification rank and will understand that it wasn’t until 13 years after the discovery that it was adopted. Moving forwards, the rest of the lesson describes how molecular phylogeny uses other molecules that can be compared between species for classification purposes. One of these is a protein called cytochrome which is involved in respiration and can be compared in terms of primary structure to determine relationships. At this point in the lesson, the students are also tested on their knowledge of the nature of the genetic code (as covered in topic 1) and have to explain how mutations to DNA can also be used for comparative purposes.
This lesson describes how the critical evaluation of new data by the scientific community leads to new taxonomic groupings, like the three domains of life. The detailed PowerPoint and accompanying resources have been designed to cover point 4.14 (ii) of the Edexcel International A-level Biology specification and focuses on the introduction of the three-domain system following Carl Woese’s detailed study of the ribosomal RNA gene.
The lesson begins with an introduction of Woese and goes on to describe how he is most famous for his definition of the Archaea as a new domain of life. Students were introduced to domains and the other classification taxa in a previous lesson, so their recall of this knowledge is continually tested and built upon as details are added. Students will discover the key differences between Archaea and Bacteria that led to the splitting of the prokaryotae kingdom and the addition of this higher classification rank. Moving forwards, the rest of the lesson describes how molecular phylogeny uses other molecules and that these are compared between species for classification purposes. One of these is a protein called cytochrome which is involved in respiration and can be compared in terms of primary structure to determine relationships. At this point in the lesson, the students are also tested on their knowledge of the nature of the genetic code (as covered in topic 2) and have to explain how mutations to DNA can also be used for comparative purposes.
This lesson describes classification as a means of organising the variety of life based on relationships between organisms. The engaging PowerPoint and accompanying resource have been designed to cover point 4.14 (i) of the Edexcel International A-level Biology specification and focuses on the classification hierarchy where species is the lowest taxon but also describes the binomial naming system which uses the genus and species. The lesson also contains links to the next lesson where molecular phylogeny is described and the three-domain system is covered in greater detail with a focus on the results of Carl Woese’s rRNA study
The lesson begins by looking at the meaning of a population in Biology so that the term species can be introduced. A hinny, which is the hybrid offspring of a horse and a donkey, is used to explain how these two organisms must be members of different species because they are unable to produce fertile offspring. Moving forwards, students will learn that classification is a means of organising the variety of life based on relationships between organisms using differences and similarities in phenotypes and in genotypes and is built around the species concept and that in the modern-day classification hierarchy, species is the lowest taxon. A quiz runs throughout the lesson and this particular round will engage the students whilst they learn (or recall) the names of the other 7 taxa and the horse and the donkey from the earlier example are used to complete the hierarchy. Students will understand that the binomial naming system was introduced by Carl Linnaeus to provide a universal name for each species and they will be challenged to apply their knowledge by completing a hierarchy for a modern-day human, by spotting the correct name for an unfamiliar organism and finally by suggesting advantages of this system.
Classification and evolution is a topic that students can find difficult, which may be for a number of reasons that include a lack of engagement during lessons or because these topics are taught quickly as exams approach at the end of year 12. However, a clear understanding is critical, as assessment questions on the content of this module are common and are often worth a significant number of marks. In line with this, the planning of each of the 7 lessons in this bundle has focused on the inclusion of a wide range of tasks that will engage and motivate the students whilst covering the following points as detailed in module 4.2.2 of the OCR A-level Biology A specification:
The biological classification of species
The taxonomic hierarchy
The binomial system of naming species and the advantages of such a system
The features used to classify organisms into the five kingdoms
The evidence that has led to new classification systems, such as the three domains of life
The different types of variation
Using standard deviation to measure the spread of a set of data
Using the Student’s t-test to compare means of data values of two populations
Using the Spearman’s rank correlation coefficient to consider the relationship of the data
The different types of adaptations of organisms to their environment
The mechanism by which natural selection can affect the characteristics of a population over time
How evolution in some species has implications for human populations
If you would like to sample the quality of the lessons included in this bundle, then download the following lessons as these have been uploaded for free:
Taxonomic hierarchy and the binomial naming system
Adaptations & natural selection
This lesson describes how the critical evaluation of new data by the scientific community leads to new taxonomic groupings, like the three domains of life. The detailed PowerPoint and accompanying resources have been designed to cover point 4.6 (ii) of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification and focuses on the introduction of the three-domain system following Carl Woese’s detailed study of the ribosomal RNA gene.
The lesson begins with an introduction of Woese and goes on to describe how he is most famous for his definition of the Archaea as a new domain of life. Students were introduced to domains and the other classification taxa in a previous lesson, so their recall of this knowledge is continually tested and built upon as details are added. Students will discover the key differences between Archaea and Bacteria that led to the splitting of the prokaryotae kingdom and the addition of this higher classification rank. Moving forwards, the rest of the lesson describes how molecular phylogeny uses other molecules and that these are compared between species for classification purposes. One of these is a protein called cytochrome which is involved in respiration and can be compared in terms of primary structure to determine relationships. At this point in the lesson, the students are also tested on their knowledge of the nature of the genetic code (as covered in topic 2) and have to explain how mutations to DNA can also be used for comparative purposes.
This lesson describes the classification system, focusing on the biological classification of a species and the 7 taxa found above this lowest taxon. The engaging PowerPoint and accompanying resource have been designed to cover point 4.6 (i) of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification and also describes the binomial naming system which uses the genus and species. The lesson also contains links to upcoming lessons where molecular phylogeny is described and the three-domain system is covered in greater detail with a focus on the results of Carl Woese’s rRNA study
The lesson begins by looking at the meaning of a population in Biology so that the term species can be introduced. A hinny, which is the hybrid offspring of a horse and a donkey, is used to explain how these two organisms must be members of different species because they are unable to produce fertile offspring. Moving forwards, students will learn that classification is a means of organising the variety of life based on relationships between organisms using differences and similarities in phenotypes and in genotypes and is built around the species concept and that in the modern-day classification hierarchy, species is the lowest taxon. A quiz runs throughout the lesson and this particular round will engage the students whilst they learn (or recall) the names of the other 7 taxa and the horse and the donkey from the earlier example are used to complete the hierarchy. Students will understand that the binomial naming system was introduced by Carl Linnaeus to provide a universal name for each species and they will be challenged to apply their knowledge by completing a hierarchy for a modern-day human, by spotting the correct name for an unfamiliar organism and finally by suggesting advantages of this system.
This lesson describes how the recent use of similarities in biological molecules and other genetic evidence has led to new classification systems. The PowerPoint and accompanying resources have been designed to cover point 4.2.2 [c] (i) of the OCR A-level Biology A specification and focuses on the introduction of the three-domain system following Carl Woese’s detailed study of the ribosomal RNA gene.
The lesson begins with an introduction of Woese and goes on to describe how he is most famous for his definition of the Archaea as a new domain of life. Students were introduced to domains and the other classification taxa in a previous lesson, so their recall of this knowledge is continually tested and built upon as details are added. Students will discover the key differences between Archaea and Bacteria that led to the splitting of the prokaryotae kingdom and the addition of this higher classification rank. Moving forwards, the rest of the lesson considers other molecules that can be compared between species for classification purposes and the primary structure of cytochrome is described and discussed. At this point in the lesson, the students are also tested on their knowledge of the nature of the genetic code and have to explain how mutations to DNA can also be used for comparative purposes.
