A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
This fully-resourced lesson describes how carbon dioxide, light intensity and temperature limit the rate of photosynthesis. The PowerPoint and accompanying resources have been designed to cover point 5.7 (viii) of the Edexcel A-level Biology B specification
The lesson has been specifically written to tie in with the four previous lessons in this topic which covered the structure of the chloroplast, the light-dependent and light-independent stages and GALP as a raw material. Exam-style questions are included throughout the lesson and these require the students to explain why light intensity is important for both reactions as well as challenging them on their ability to describe how the relative concentrations of GP, GALP and RuBP would change as carbon dioxide concentration decreases. There are also links to previous topics such as enzymes when they are asked to explain why an increase in temperature above the optimum will limit the rate of photosynthesis. Step by step guides are included to support them to form some of the answers and mark schemes are always displayed so that they can quickly assess their understanding and address any misconceptions
This lesson describes how to use the magnification formula to calculate the actual sizes of specimens in a range of units. The PowerPoint and accompanying resources have been designed to cover point 1.1 (e) of the CIE A-level Biology specification but can also be used as a revision tool on the content of the previous two lessons as prior knowledge checks are included along with current understanding checks.
The students are likely to have met the magnification formula at iGCSE so this lesson has been written to build on that knowledge and to support them with more difficult questions when they have to calculate actual size without directly being given the magnification. A step by step guide is used to walk the students through the methodology and useful tips are provided. The final quiz round of the competition that has run over the course of these 3 lessons will challenge them to convert between units so they are confident when challenged to present actual size in millimetres, micrometres or nanometres.
This lesson describes how monosaccharides are joined together during condensation reactions to form maltose, sucrose and lactose. The PowerPoint and accompanying resource have been designed to cover the third part of point 1.2 & 1.4 of the Edexcel International A-level Biology specification but also make links to the previous lesson on monosaccharides when considering the different components of these three disaccharides.
The first section of the lesson focuses on a prefix and a suffix so that the students can recognise that the names of the common disaccharides end in -ose. In line with this, a quick quiz round is used to introduce maltose, sucrose and lactose before students are challenged on their prior knowledge as they have to describe how condensation reactions and the formation of glycosidic bonds were involved in the synthesis of each one. The main task of the lesson again challenges the students to recall details of a previous lesson as they have to identify the monomers of each disaccharide when presented with the displayed formula. Time is taken to show how their knowledge of these simple sugars will be important in later topics such as digestion, translocation in the phloem and the Lac Operon in the control of gene expression. The lesson finishes with two exam-style questions where students have to demonstrate and apply their newly acquired knowledge and the mark schemes are included within the lesson PowerPoint so students can assess their understanding and address any misconceptions if they have arisen.
This lesson describes how an interaction of muscles, tendons, the skeleton and ligaments is needed for movement of the human body. The PowerPoint and accompanying resources have been designed to cover point 7.9 of the Edexcel International A-level Biology specification and also includes descriptions of antagonistic muscle pairs, extensors and flexors.
At the start of the lesson, the prep room skeleton is used as the example to show that bones without muscles are bones that are unable to move (unaided). Moving forwards, the students will learn that skeletal muscles are attached to bones by bundles of collagen fibres known as tendons and as they covered the relationship between the structure and function of collagen in topic 2, a task is used that challenges their recall of these details. This will allow them to recognise that the ability of this fibrous protein to withstand tension is important for the transmission of the force from the muscle to pull on the moveable bone. A series of quick quiz competitions introduce the key terms of flexion and antagonistic and then an exam-style question challenges them to recognise the structures involved in extension at the elbow. The remainder of the lesson focuses on the role of ligaments and one final example of extension at the knee joint will demonstrate how the interaction of all of the structures met over the course of the lesson is needed for movement
This fully-resourced lesson has been written to support students to develop a clear understanding of 16 key genetic terms, including the 8 that are detailed in specification point 8.2 (i) of the Edexcel A-level Biology B specification. The 16 terms are genome, gene, chromosome, gene locus, homologous chromosomes, alleles, dominant, recessive, genotype, codominance, multiple alleles, autosomes, sex chromosomes, phenotype, homozygous and heterozygous.
As some of these terms were met at GCSE, this fully-resourced lesson has been designed to include a wide range of activities that build on this prior knowledge and provide clear explanations as to their meanings as well as numerous examples of their use in both questions and exemplary answers. The main task provides the students with an opportunity to apply their understanding by recognising a dominance hierarchy in a multiple alleles characteristic and then calculating a phenotypic ratio when given a completed genetic diagram. Other tasks include prior knowledge checks, discussion points to encourage students to consider the implementation of the genetic terms and quiz competitions to introduce new terms, maintain engagement and to act as an understanding check.
This engaging lesson describes how the structure and properties of phospholipids relate to their functions in cell membranes. The PowerPoint has been designed to cover point 1.2 (iv) as detailed in the Edexcel A-level Biology B specification and includes regular references to the previous lesson on triglycerides to check on knowledge and understanding
The role of a phospholipid in a cell membrane provides the backbone to the whole lesson. A quick quiz round called family affair, challenges the students to use their knowledge of the structure of a triglyceride to identify the shared features in a phospholipid. This then allows the differences to be introduced, such as the presence of a phosphate group in place of the third fatty acid. Moving forwards, the students will learn that the two fatty acid tails are hydrophobic whilst the phosphate head is hydrophilic which leads into a key discussion point where the class has to consider how it is possible for the phospholipids to be arranged when both the inside and outside of a cell is an aqueous solution. The outcome of the discussion is the introduction of the bilayer which is critical for the lessons in topic 4 on the fluid mosaic model. The final part of the lesson explains how both facilitated diffusion and active transport mean that proteins are found floating in the cell membrane and this also helps to briefly prepare the students for upcoming topic 4 lessons.
A concise, fast-paced lesson that looks at the orbits of both natural and artifical satellites. The lesson has been written to build on the student’s knowledge of space from KS3 and add key details such as the gravitational pull between the different celestial objects. Students will learn how the speed of the orbiting object and the gravitational pull ensure that the object remains in orbit and consider what would happen should the speed change. Students are briefly introduced to a number of orbits of artificial satellites as well as the uses.
This lesson has been designed for GCSE students
This revision resource contains a concise yet informative PowerPoint (25 slides) and a worksheet that will enable the students to assess their understanding of the topic B4 (Enzymes) content of the CIE IGCSE Combined Science specification for examination in June and November 2020 and 2021. The range of exam questions (with explained answers), quick tasks and quiz competitions have been designed to cover as much content as possible but the following topics have received particular attention:
Enzymes as biological catalysts that speed up reactions
The binding of a substrate with the active site of an enzyme
The effect of a changing pH on the activity of an enzyme
The effect of a changing temperature on the activity of an enzyme
Denaturation
This lesson focuses on the nature of the genetic code in terms of being near universal, non-overlapping and degenerate and specifically focuses on this latter term to explain how a mutation may not result in a change to the sequence of amino acids. The PowerPoint has been designed to cover point 2.1.3 (f) of the OCR A-level Biology A specification and there are clear links to gene mutations which students will meet in module 6.
The lesson begins by introducing the terms near universal and non-overlapping in addition to degenerate. A quick quiz competition is used to generate the number 20 so that the students can learn that there are 20 proteinogenic amino acids in the genetic code. This leads into a challenge, where they have to use their prior knowledge of DNA to calculate the number of different DNA triplets (64) and the mismatch in number is then discussed and related back to the lesson topic. Moving forwards, base substitutions and base deletions are briefly introduced so that they can see how although one substitution can change the primary structure, another will change the codon but not the encoded amino acid. The lesson concludes with a brief look at the non-overlapping nature of the code so that the impact of a base deletion (or insertion) can be understood when covered in greater detail in module 6.
This lesson has been designed to cover the content set out in specification point 7.1 (The endocrine system) of topic 7 of the Edexcel GCSE Biology & Combined Science courses. A wide range of activities have been written into the lesson with the aim of engaging and motivating the students whilst ensuring that the content is covered in detail. These activities include a number of quiz competitions which will challenge the students to identify an endocrine organ when presented with three organs as well as introducing them to the names of some of the hormones released by the pituitary gland.
The following content is covered in this lesson:
Hormones as chemicals which have a slow but long lasting effect on target organs
The location of the pituitary, adrenal and thyroid glands in the human body
The location of the pancreas, ovaries and testes in the human body
The hormones which are secreted by the endocrine glands
The effects of the hormones on their target organs
This lesson has been written for GCSE-aged students who are studying on the Edexcel courses but it is suitable for younger students who are looking at the different organ systems
This engaging lesson acts as an introduction to carbohydrates and describes the differences between monosaccharides, disaccharides and polysaccharides. The PowerPoint and accompanying worksheet have been designed to cover the first part of points 1.12 & 1.13 of the Pearson Edexcel A-level Biology A specification and make clear links to the upcoming lessons in this sub-topic on these three main groups of carbohydrates.
The lesson begins with a made-up round of the quiz show POINTLESS, where students have to try to identify four answers to do with carbohydrates. In doing so, they will learn or recall that these molecules are made from carbon, hydrogen and oxygen, that they are a source of energy which can sometimes be rightly or wrongly associated with obesity and that the names of the three main groups is derived from the Greek word sakkharon. A number of quick quiz rounds have been written into the lesson to introduce key terms in a fun and memorable way and the first round allows the students to meet some of common monosaccharides. Moving forwards, students will learn that a disaccharide is formed when two of these monomers are joined together and they are then challenged on their knowledge of condensation reactions which were originally encountered during the lesson on water. Students will understand how multiple reactions and multiple glycosidic bonds will result in the formation of a polysaccharide and glycogen and starch are introduced as well as amylose and amylopectin as components of this latter polymer. The final part of the lesson considers how hydrolysis reactions allow polysaccharides and disaccharides to be broken back down into monosaccharides.
This fully-resourced lesson describes how triglycerides are formed during condensation reactions and compares saturated and unsaturated lipids. The engaging PowerPoint and accompanying worksheets have been designed to cover the points 1.14 (i) & (ii) of the Pearson Edexcel A-level Biology A specification and links are also made to related future topics such as the importance of the myelin sheath for the conduction of an electrical impulse.
The lesson begins with a focus on the basic structure and roles of lipids, including the elements that are found in this biological molecule and some of the places in living organisms where they are found. Moving forwards, the students are challenged to recall the structure of the carbohydrates from topics 1.12 & 1.13 so that the structure of a triglyceride can be introduced. Students will learn that this macromolecule is formed from one glycerol molecule and three fatty acids and have to use their understanding of condensation reactions to draw the final structure. Time is taken to look at the difference in structure and properties of saturated and unsaturated fatty acids and students will be able to identify one from the other when presented with a molecular formula. The final part of the lesson explores how the various properties of a triglyceride mean that it has numerous roles in organisms including that of an energy store and source and as an insulator of heat and electricity.
This concise lesson describes the basic structure of an amino acid and introduces them as the monomers of polypeptides. The engaging PowerPoint has been designed to cover point 2.9 (i) of the Pearson Edexcel A-level Biology A specification and has been specifically written to lead into the next lesson on dipeptides and polypeptides.
The lesson begins with a prior knowledge check, where the students have to use the 1st letters of 4 answers to uncover a key term. This 4-letter key term is gene and the lesson begins with this word because it is important for students to understand that these sequences of bases on DNA determine the specific sequence of amino acids in a polypeptide as detailed in specification point 2.8. Moving forwards, the students are given discussion time to work out that there are 64 different DNA triplets and will learn that these encode for the 20 amino acids that are common to all organisms. The main task of the lesson is an observational one, where students are given time to study the displayed formula of 4 amino acids. They are not allowed to draw anything during this time but will be challenged with 3 multiple choice questions at the end. This task has been designed to allow the students to visualise how the 20 amino acids share common features in an amine and an acid group. A quick quiz round introduces the R group and time is taken to explain how the structure of this side chain is the only structural difference, before cysteine is considered in greater detail due to the presence of sulfur atoms. Students are briefly introduced to disulfide bridges so they will recognise how particular bonds form between the R groups in the tertiary structure which is covered in the next lesson. The lesson concludes with one more quiz round called LINK TO THE FUTURE where the students will see the roles played by amino acids in the later part of the course such as translation and dipeptides.
This fully-resourced lesson describes the relationship between the molecular structure of a triglyceride and its functions in living organisms. The engaging PowerPoint and accompanying worksheets have been designed to cover specification point 2.2 (f) of the CIE International A-level Biology course and links are also made to related future topics such as the importance of the myelin sheath for the conduction of an electrical impulse and the use of lipids as a respiratory substrate.
The lesson begins with a focus on the basic structure and roles of lipids, including the elements that are found in this biological molecule and some of the places in living organisms where they are found. Moving forwards, the students are challenged to recall the structure of the carbohydrates from earlier in topic 2 so that the structure of a triglyceride can be introduced. Students will learn that this macromolecule is formed from one glycerol molecule and three fatty acids and have to use their understanding of condensation reactions to draw the final structure. Time is taken to look at the difference in structure and properties of saturated and unsaturated fatty acids and students will be able to identify one from the other when presented with a molecular formula. The final part of the lesson explores how the various properties of a triglyceride mean that it has numerous roles in organisms including that of an energy store and source and as an insulator of heat and electricity.
This lesson focuses on the use and explanation of key genetic terms which will support students in their understanding of the topic 16 (inherited change) of the CIE International A-level Biology specification. In this topic, students are expected to use genetic diagrams to solve problems and this is only possible with a clear understanding of the genetic terminology that will be used in related exam questions. As some of these terms were met at GCSE, this fully-resourced lesson has been designed to include a wide range of activities that build on this prior knowledge and provide clear explanations as to their meanings as well as numerous examples of their use in both questions and exemplary answers. The main task provides the students with an opportunity to apply their understanding by recognising a dominance hierarchy in a multiple alleles characteristic and then calculating a phenotypic ratio when given a completed genetic diagram. Other tasks include prior knowledge checks, discussion points to encourage students to consider the implementation of the genetic terms and quiz competitions to introduce new terms, maintain engagement and act as an understanding check.
The 16 terms are genome, gene, chromosome, gene locus, homologous chromosomes, alleles, dominant, recessive, genotype, codominance, multiple alleles, autosomes, sex chromosomes, phenotype, homozygous and heterozygous
This concise, engaging revision lesson has been designed to include activities that will motivate the students whilst they assess their understanding of topic B3 (Biological molecules) of the CIE IGCSE Combined Science specification. An understanding of biological molecules is fundamental to the understanding of a lot other Biology topics and this lesson has attempted to make the links between the different areas.
The range of activities which include exam questions, quick tasks and quiz competitions have been written to cover as much of the content as possible but the following topics have received particular attention:
The chemical elements in carbohydrates
The formation of starch and glycogen from glucose
The iodine test for starch
Lipids are formed of fatty acids and glycerol
Investigational skills
The ethanol emulsion test for lipids
This resource includes a PowerPoint (27 slides) and a worksheet with a task about the digestion of milk fat so students can recognise the components of lipids
This lesson focuses on the nature of the genetic code and specifically focuses on the degenerate nature to make a link to gene mutations which is covered later in topic 2. The PowerPoint has been designed to cover point 2.7 of the Pearson Edexcel A-level Biology (Salters Nuffield) specification which states that students should understand how the descriptive terms triplet code, degenerate and non-overlapping relate to the genetic code.
The lesson begins by introducing the terms near universal and non-overlapping in addition to degenerate. A quick quiz competition is used to generate the number 20 so that the students can learn that there are 20 proteinogenic amino acids in the genetic code. This leads into a challenge, where they have to use their prior knowledge of DNA to calculate the number of different DNA triplets (64) and the mismatch in number is then discussed and related back to the lesson topic. Moving forwards, substitutions and deletions are briefly introduced so that they can see how although one substitution can change the primary structure, another will change the codon but not the encoded amino acid. The lesson concludes with a brief look at the non-overlapping nature of the code so that the impact of a base deletion can be understood when covered in greater detail with cystic fibrosis
This fully-resourced lesson covers the meaning of the 9 genetic terms that are detailed in point 2.13 (i) of the Pearson Edexcel A-level Biology (Salters Nuffield) specification as well as four other key terms which will need to be used later in topic 2, 3 and 8.
In the following lessons, students are expected to be able to demonstrate and apply their knowledge and understanding of genetic diagrams and phenotypic ratios to show patterns of inheritance and this is only possible with a clear understanding of the genetic terminology that will be used in related exam questions. As some of these terms were met at GCSE, this lesson has been designed to build on this prior knowledge and provide clear explanations as to their meanings as well as numerous examples of their use in both questions and exemplary answers. The main task provides the students with an opportunity to apply their understanding by recognising a dominance hierarchy in a multiple alleles characteristic and then calculating a phenotypic ratio when given a completed genetic diagram. Other tasks include prior knowledge checks, discussion points to encourage students to consider the implementation of the genetic terms and quiz competitions to introduce new terms, maintain engagement and act as an understanding check.
The 13 terms are genome, gene, chromosome, gene locus, homologous chromosomes, alleles, dominant, recessive, genotype, phenotype, homozygotes and heterozygotes
