This lesson describes the chemical tests for proteins, reducing and non-reducing sugars, starch and lipids and explains how to interpret the results. The PowerPoint and accompanying resource have been designed to cover point 2.1.2 (q) of the OCR A-level Biology A specification. The lesson begins with an explanation of the difference between a qualitative and quantitative test so that the students recognise that the four tests described within this lesson indicate the presence of a substance but not how much. The students are likely to have met these tests at GCSE so this lesson has been planned to build on that knowledge and to add the knowledge needed at this level. A step by step guide walks the students through each stage of the tests for reducing and non-reducing sugars and application of knowledge questions and prior knowledge checks are included at appropriate points to ensure understanding is complete. Time is also taken to ensure that students understand the Science behind the results. The next part of the lesson focuses on the iodine test for starch and the students will learn that the colour change is the result of the movement of an ion into the amylose helix. The rest of the lesson describes the steps in the biuret test for proteins and the emulsion test for lipids. The students will learn that the addition of sodium hydroxide and then copper sulphate will result in a colour change from light blue to lilac if a protein is present and that following the addition of a sample to ethanol and then water, a cloudy emulsion is observed if a lipid is present.

This fully-resourced lesson describes genetic biodiversity as the number of genes in a population and considers how it can be assessed. The engaging PowerPoint and accompanying differentiated resources have been primarily designed to cover point 4.2.1 (e) of the OCR A-level Biology A specification but also introduces inheritance and codominance so that students are prepared for these genetic topics when they are covered in module 6.1.2 In order to understand that 2 or more alleles can be found at a gene loci, students need to be confident with genetic terminology. Therefore the start of the lesson focuses on key terms including gene, locus, allele, recessive, genotype and phenotype. A number of these will have been met at GCSE, as well as during the earlier lessons in module 2.1.3 when considering meiosis, so a quick quiz competition is used to check on their recall of the meanings of these terms. The CFTR gene is then used as an example to demonstrate how 2 alleles results in 2 different phenotypes and therefore genetic diversity. Moving forwards, students will discover that more than 2 alleles can be found at a locus and they are challenged to work out genotypes and phenotypes for a loci with 3 alleles (shell colour in snails) and 4 alleles (coat colour in rabbits). Two calculations are provided to the students that can calculate the % of loci with more than one allele and the proportion of polymorphic gene loci. At this point, the students are introduced to codominance and again they are challenged to apply their understanding to a new situation by working out the number of phenotypes in the inheritance of blood groups. The lesson concludes with a brief consideration of the HLA gene loci, which is the most polymorphic loci in the human genome, and students are challenged to consider how this sheer number of alleles can affect the chances of tissue matches in organ transplantation

This lesson describes the steps in the emulsion test for lipids and then uses a range of tasks to challenge the students on their knowledge of topic 1.3. The engaging PowerPoint and accompanying resource are part of the last lesson in a series of 3 lessons which have been designed to cover the content of point 1.3 (lipids) of the AQA A-level Biology specification. The first part of the lesson describes the key steps in the emulsion test for lipids, and states the positive result for this test. There is a focus on the need to mix the sample with ethanol, which is a distinctive difference to the tests for reducing sugars and starch. The remainder of the lesson uses exam-style questions with mark schemes embedded in the PowerPoint, understanding checks, guided discussion points and quick quiz competitions to challenge the following specification points: The structure of a triglyceride The relationship between triglyceride property and function The hydrophilic and hydrophobic nature of the phospholipid The phospholipid bilayer of the cell membrane Cholesterol is also introduced so that students are prepared for this molecule when it is met in topic 2.3 (cell membranes)

A fully resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within TOPIC 9 (Chemistry of the atmosphere) of the AQA GCSE Chemistry specification (specification point C4.9). The topics that are tested within the lesson include: The proportion of different gases in the atmosphere The Earth’s early atmosphere Greenhouse gases Atmospheric pollutants Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require further attention

An engaging, practical-based lesson presentation (34 slides), accompanied by a practical worksheet and differentiated questions worksheet, which together guide students through the different calculation questions which involve the half-life. The lesson begins by introducing the students to the definition of a half-life and then showing them an example with I-131 so they can visualise how the half-life doesn’t change (and that radioactivity is measured in Bq). Moving forwards, the students will follow the given instructions to create the results to plot a decay curve and will be shown how to use this curve to determine the half-life of an isotope. The remainder of the lesson focuses on the different calculation questions that can be found on exam papers and uses a step by step guide to help them to handle the increasing difficulty. Students will be challenged to apply their new found knowledge to a set of 5 questions and this worksheet has been differentiated two ways so that those who need extra assistance, can still access the learning. Progress checks have been written into the lesson at regular intervals so that students can constantly assess their understanding. This lesson has been designed for GCSE students (14 - 16 years old in the UK)

This is an engaging and informative lesson that looks at the wires inside a UK plug and considers their role in terms of the supply of mains electricity. The safety features of the plug, such as the fuse, are also discussed so that students can understand how a particular fuse is chosen. As the cover image shows, the lesson begins by challenging the students to use their knowledge of all three of the Sciences to come up with the three names of the wires. Some students will know that these are the wires in a UK plug but some wont. Key terminology such as three-core cable is used throughout, as well as a running theme with the colours, so that students become accustomed to identifying a particular wire by its plastic insulation. Through a range of tasks which encourage student discovery and educated predictions, the students will learn the functions of each of the wires as well as their potential difference. The fuse is introduced to the students and links are made to the electrical circuits topic by considering the resistance of the wire inside the fuse and challenging them to use the electrical power equation to calculate a current and choose an appropriate fuse for that plug. The aim of the lesson is to get students to absorb information as the lesson progresses in order to eventually label a black and white diagram of the plug. The last part of the lesson looks at two-core cables and then relates this back to the importance of the earth wire in a UK plug. This lesson has been written for GCSE aged students but is suitable for use with younger students who are learning about this topic.

An engaging lesson presentation (43 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P5 (Energy) of the OCR Gateway A GCSE Combined Science specification The topics that are tested within the lesson include: Conservation of energy Efficiency Energy transfer by heating Mechanical energy transfers Students will be engaged through the numerous activities including quiz rounds like “The TRANSFER market” whilst crucially being able to recognise those areas which need further attention

A fully resourced lesson which includes an informative lesson presentation (25 slides) and an associated worksheet that show students how to give answers to a certain number of significant figures. The answers to questions in Science are often required to be given in significant figures and this lesson guides students through this process, including the rules of rounding that must be applied for success to be likely. This lesson has been designed for GCSE students but is suitable for KS3

A fully-resourced lesson that explores how resistance, current and potential difference differ between series and parallel circuits. This knowledge needs to be sound in order for students to be able to carry out circuit calculations. The lesson includes a practical and task-based lesson presentation (24 slides) and an accompanying worksheet. The lesson begins by challenging the students to recognise the key difference between the two circuits, in that in a parallel circuits, the electrons can follow more than one route. Moving forwards, each physical factor is investigated in each type of circuits and students carry out tasks or calculations to back up any theory given. Helpful analogies and hints are provided to guide the students through this topic which is sometimes poorly understood. Students will be challenged to use the V = IR equation on a number of occasions so that they are comfortable to find out any of these three factors. Progress checks have been written into the lesson at regular intervals so that students are constantly assessing their understanding and any misconceptions can be addressed. This has been written for GCSE students, but could be potentially used with higher ability KS3 students.

This is a fully-resourced lesson that looks at the different parts of the National Grid, specifically focusing on the roles of the step-up and step-down transformers. The lesson includes an informative lesson presentation (25 slides) and a calculations worksheet which challenges the students to apply their mathematical skills to work out why the potential difference is increased and decreased by the transformers. Time has been taken to make links to related topics such as electrical circuits as well as the conservation of energy. Students will recognise that a high current would have led to a lot energy being dissipated to a thermal energy store if step-up transformers weren’t involved and also that decreasing the potential difference before it enters the homes as mains electricity is important to reduce the risk of electrocution. A number of quick competitions are used to introduce key terms or to check on understanding such as ORDER, ORDER which is shown on the cover image where students have to recognise when the parts of the National Grid are finally shown in the correct order. This lesson has been designed for GCSE aged students.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the sub-topics found within Topic P10 (Electricity and their circuits) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Draw and use electric circuit diagrams Describe the difference between series and parallel circuits Recall that an ammeter is set up in series and a voltmeter is set up in parallel Explain that the electric current is the rate of flow of charge Recall and use the equation connecting potential difference, current and resistance Calculate the current, potential difference and resistance in series and parallel circuits Describe power as the energy transferred per second and is measured in Watts Describe the differences between alternating and direct current Recall that mains electricity uses alternating current and has a frequency of 50Hz Explain the difference between the function of the neutral and live wires Explain the function of the earth wire and fuses in ensuring safety Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topics P4 and P5 (Waves, Light and the Electromagnetic spectrum) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Define and use the terms frequency, wavelength, amplitude, period and wave velocity as applied to waves Describe the difference between longitudinal and transverse waves by referring to sound and EM waves Recall and use the two equations to calculate wave speed Describe how to measure the velocity of sound in air and ripples on water surfaces Explain how waves will be refracted at a boundary in terms of the change in direction and speed Recall that the EM waves are transverse and travel at the same speed in a vacuum Recall the main groupings of the EM spectrum Recall the potential danger associated with EM waves with increasing frequency Describe some uses of the EM waves Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Chemical changes) of the Edexcel GCSE Chemistry specification. The specification points that are covered in this revision lesson include: Recall that acids in solution are sources of hydrogen ions and alkalis in solution are sources of hydroxide ions Recall that the higher the concentration of hydrogen ions in an acidic solution, the lower the pH; and the higher the concentration of hydroxide ions in an alkaline solution, the higher the pH Recall that as hydrogen ion concentration in a solution increases by a factor of 10, the pH of the solution decreases by 1 Recall that a base is any substance that reacts with an acid to form a salt and water only Recall that alkalis are soluble bases Explain the general reactions of aqueous solutions of acids with metals, metal oxides, metal hydroxides and metal carbonates to produce salts Describe the chemical test for hydrogen and carbon dioxide Describe a neutralisation reaction as a reaction between an acid and a base Explain an acid-alkali neutralisation as a reaction in which hydrogen ions (H+) from the acid react with hydroxide ions (OH–) from the alkali to form water Explain how a soluble salts is prepared from an acid and an insoluble reactant Explain how soluble salts are prepared from an acid and a soluble reactant Recall that electrolytes are ionic compounds in the molten state or dissolved in water Explain the movement of ions during electrolysis Explain the formation of the products in electrolysis Write half equations for reactions occurring at the anode and cathode in electrolysis Explain oxidation and reduction in terms of loss or gain of electrons The students will thoroughly enjoy the range of activities, which includes quiz competitions like “From NUMBERS 2 LETTERS” where they compete to be the 1st to get the abbreviation Oil Rig whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

A detailed lesson which looks at the type of cell division known as mitosis and aims to ensure that students understand that it leads to the production of genetically identical daughter cells. In order to understand this type of cell division and any related topic such as meiosis, students have to be confident with the use of terms like diploid. In addition to this, time is taken to introduce them to a way of considering the quantity of DNA within a cell in terms of n. If they are able to use this correctly, then no matter the organism which is involved in a mitosis exam question, they will be able to answer successfully. Discussion points and progress checks are written into the lesson at regular intervals so their understanding can be assessed. The last part of the lesson provides the students with an opportunity to apply their knowledge of mitosis to a range of exam questions and they can assess against the displayed mark schemes. This lesson has been designed for GCSE students (14 - 16 year olds in the UK) but is also appropriate for older students who want to recap on the key details of the division before extended knowledge is added.

A fully-resourced lesson which guides students through drawing, writing and recognising the electronic configurations of atoms and ions. The lesson includes an engaging lesson presentation (33 slides), an associated worksheet and a competition worksheet. The lesson begins by introducing the students to the number of electrons that can be held on the first three electron shells. They are then shown how to draw an electronic configuration and write this in brackets form. Students are given the opportunity to apply this knowledge by drawing the configuration of first 20 elements of the Periodic Table. Moving forwards, students are guided to enable them to discover how the electron configuration is linked to the position of an atom in the Periodic Table. The remainder of the lesson focuses on ions and how the configuration of these substances can be recognised. Some time is taken to explain how ions are formed from atoms and the lesson finishes with a competition which challenges students to identify atoms or ions from their configurations to form a word. There are regular progress checks throughout the lesson to allow the students to check on their understanding and a range of quiz competitions to maintain engagement. This lesson has been written for GCSE students but could be used with younger students, especially the initial part of the lesson on atoms and the link to the Periodic Table

An engaging and detailed lesson presentation (31 slides) that looks at how nitrogen is cycled and focuses on the different bacteria who play key roles in this cycle. The lesson begins by exploring why nitrogen is so critical for living organisms for the synthesis of DNA and proteins. Students are introduced to nitrogen-fixing bacteria to start and challenged to use their knowledge of interdependence to state the type of ecological relationship that is formed between them and the leguminous plant that they live on. Each stage of the cycle is complimented by a diagram highlighting that part so students are able to visualise how the cycle comes together. Time is taken to ensure that students recognise that any non-leguminous plants can only absorb nitrogen when it is nitrates form from the soil. Moving forwards, students will meet decomposers and nitrifying bacteria and again be shown where their function fits into the cycle. As the final part of the learning, students are challenged to consider what else is needed in order for this to be a cycle and will meet the denitrifying bacteria as a result. Progress checks, in a range of forms, have been written into this lesson at regular intervals so that students can assess their understanding and any misconceptions can be immediately addressed. This lesson has been written for GCSE students, but could be used with A-level students who want to have a recap before extending their knowledge further.

This lesson has been written for GCSE students with a focus on the key processes and reactions involved in the carbon cycle as well as discussions centering around how the levels of carbon dioxide alter during the day and over longer periods of time. A number of quick competitions have been written into the lesson to introduce key terms or to challenge students to recognise key reactions that they will have already met in their Biology lessons. As each stage of the cycle is encountered, time is taken to discuss the potential impacts and the organisms involved. The remainder of the lesson looks at carbon dioxide levels. Initially, students are challenged to explain why the levels would change during the course of a day. Students are already likely to be aware that carbon dioxide levels have increased over the last 100/200 years but not necessarily how much. Time is taken to focus on the mathematical skills which could be challenged on this topic and the percentage change equation is shown to the students so they can quantify their answers. As a class, deforestation and its effect on the carbon cycle and atmospheric levels are discussed so that students can mirror this in a homework task about combustion of fossil fuels. Progress checks are written into the lesson at regular intervals so that students are constantly assessing their understanding.

This fully-resourced lesson describes the relationship between the structure and function of globular proteins, specifically focusing on haemoglobin, insulin and pepsin. The detailed and engaging PowerPoint and accompanying resources have been primarily designed to cover specification point 2.1.2 (n) of the OCR A-level Biology A course but due to the detailed coverage of haemoglobin, the start of this lesson could also be used when teaching lessons that cover specification points 3.1.2 (i) and (j). By the end of the lesson, students will be able to describe that the interactions of the hydrophobic and hydrophilic R groups results in a spherical shape that is soluble in water and be able to explain the importance of this property with reference to the individual functions of these three globular proteins. They will also be able to name key individual details for each protein, such as haemoglobin being a conjugated protein, insulin being linked by numerous disulfide bridges and pepsin’s low number of basic R groups meaning it is stable in the acidic environment of the stomach. Extra time has gone into the planning of this lesson to ensure that links are continuously made to previous topics such as amino acids and the levels of protein structure as well as to upcoming topics like the control of blood glucose concentration that is covered in module 5.1.4.

This fully-resourced lesson describes the components of the chloroplast, focusing on the grana and stroma as the sites of photosynthesis. The engaging PowerPoint and accompanying resources have been designed to cover point 5.2.1 (b) of the OCR A-level Biology A specification and has been specifically designed to introduce students to the light-dependent and light-independent stages before they are covered in detail in upcoming lessons. Students were introduced to eukaryotic cells and their organelles structures in module 2.1.1 so this lesson has been written to test and to build on that knowledge. A version of the quiz show POINTLESS runs throughout the lesson and this maintains engagement whilst challenging the students to recall the parts of the chloroplast based on a description which is related to their function. The following structures are covered in this lesson: double membrane thylakoids (grana) stroma intergranal lamellae starch grains chloroplast DNA and ribosomes Once each structure has been recalled, a range of activities are used to ensure that key details are understood such as the role of the thylakoid membranes in the light-dependent reactions and the importance of ATP and reduced NADP for the reduction of GP to TP in the Calvin cycle. Links to other topics are made throughout and this is exemplified by the final task of the lesson where students are challenged on their recall of the structure, properties and function of starch (as originally covered in module 2.1.2)

This fully-resourced lesson describes the relationship between the properties and functions of the fibrous proteins, collagen, keratin and elastin. The detailed PowerPoint and accompanying resources have been designed to cover point 2.1.2 (o) of the OCR A-level Biology A specification but also make links to upcoming topics such as blood vessel structure and the immune system as well as constantly challenging students on their knowledge of proteins from earlier in this module. The lesson begins by challenging the students to recognise 7 structures found in animals from their descriptions and once they’ve written feathers, cartilage, bones, arteries, tendons, callus and skin into the right places, they will reveal the term fibrous and learn that these types of protein are found in these structures. Using their knowledge of the properties of globular proteins, they will learn that the insolubility of fibrous proteins allows them to form fibres, which perform structural functions. The rest of the lesson focuses on the functions of collagen, keratin and elastin and time is taken to discuss the key details and to make links to future topics so that students can recognise the importance of cross-modular based answers. A series of exam-style questions are used to challenge their knowledge of protein structure as well as their ability to apply their knowledge to an unfamiliar situation when learning that elastin is found in the walls of the urinary bladder. All of the questions have mark schemes embedded into the PowerPoint to allow them to immediately assess their understanding. This lesson has been specifically planned to tie in with the previous lesson on globular proteins as well as the one preceding that on the structures of proteins