This is a fully-resourced lesson which uses exam-style questions, quiz competitions, quick tasks and discussion points to challenge students on their understanding of topics C1 - C5, that will assessed on PAPER 3. It has been specifically designed for students on the AQA GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to cover as many sub-topics as possible, but the following have been given particular attention: The relative mass and charge of protons, electrons and neutrons Using the Periodic table to calculate numbers of the sub-atomic particles Writing elements and compounds in chemical symbol equations Covalent structures Drawing dot and cross diagrams for covalent and ionic compounds The transfer of electrons during the formation of an ionic bond Properties of metals and non-metals States of matter Conservation of mass and balancing symbol equations Calculating the relative formula mass Electrolysis of molten salts and aqueous solutions Extraction of metals In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been written into the lesson to walk students through some of the more difficult concepts such as drawing dot and cross diagrams and writing chemical formulae. Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3/4 teaching hours to complete the tasks and therefore this can be used at different points throughout the course as well as acting as a final revision before the PAPER 3 exam.

This is a fully-resourced lesson which uses exam-style questions, engaging quiz competitions, quick tasks and discussion points to challenge students on their understanding of the content of topics P1 - P6, that will assessed on PAPER 5. It has been specifically designed for students on the Edexcel GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to cover as many specification points as possible but the following sub-topics have been given particular attention: Factors affecting thinking and braking distance The 7 recall and apply equations tested in PAPER 5 The units associated with the physical factors challenged in PAPER 5 Recognising the motions represented by different motions on velocity-time graphs Using a velocity-time graph to calculate acceleration Resultant forces Sound waves as longitudinal waves The electromagnetic waves Using significant figures and standard form The relative charges and masses of the particles in an atom Recognising isotopes Using the half-life of radioactive isotopes The development of the atomic model In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been incorporated into the lesson to walk through students through some of the more difficult concepts such as half-life calculations. Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3 teaching hours to complete the tasks and therefore this can be used at different points throughout the course as well as acting as a final revision before the PAPER 5 exam.

A fully-resourced lesson, designed for GCSE students which includes an engaging and informative lesson presentation (49 slides) and an image, actual and magnification question worksheet. This lesson looks at the key features of light and electron microscopes and guides students through calculating size and magnification. The lesson begins by challenging students to pick out two key terms about microscopes, magnification and resolution, from a group of Scientific words. The understanding of these two terms is critical if students will be able to compare the two types of microscopes so time is taken to go through the definitions and give examples. A number of quick quiz competitions have been written into the lesson to aid the engagement on a topic that some students may not initially consider to be that motivating. These competitions allow key terms such as micrometer and the two types of electron microscope to be introduced in an engaging way. As a result, students will know the numbers that explain why electron microscopes are more advanced than their light counterparts. The remainder of the lesson looks at the units of size which are used in calculation questions and a step by step guide is used to show the students to calculate the actual size of an object or the magnification. Progress checks have been written into this lesson at regular intervals so that students are constantly assessing their understanding.

This engaging REVISION lesson has been designed to cover the content of topic 3 (Enzymes) of the CIE International A-level Biology specification. A wide range of activities have been written into the lesson to engage the students whilst they assess their understanding of the topic content. All of the exam questions contain detailed answers which students can use to identify missed marks and quiz competitions are used, like FROM NUMBERS 2 LETTERS (shown in the cover image) to recall key concepts and check on the finer details. The lesson has been planned to cover as much of the specification content as possible but the following sub-topics have received particular attention: Enzymes as globular proteins that act as biological catalysts Formation of the enzyme-substrate complex The lock and key theory and induced-fit hypothesis Competitive and non-competitive inhibitors The Michaelis-Menten constant The effect of changes in pH and temperature on the tertiary structure of the enzymes The immobilisation of enzymes using alginate Time has been taken in the design to ensure that links to other topics are made. For example, when checking the knowledge of the denaturation of enzymes due to pH and temperature, the bonds found in the tertiary structure are recalled and considered in depth.

This detailed and engaging REVISION LESSON has been written to cover the content of topic 4 (Cell membranes and transport) of the CIE International A-level Biology specification. The lesson consists of a PowerPoint that contains exam questions, differentiated tasks and quiz competitions and is accompanied by worksheets with further activities. The competitions act to engage the students whilst they assess their understanding of the content and challenges their ability to apply this knowledge to potentially unfamiliar situations. The lesson was designed to cover as much of the specification content as possible but the following sub-topics have received particular attention: Active transport and its applications in animals and plants Facilitated diffusion and the use of channel and carrier proteins The factors that affect diffusion as demonstrated by gas exchange at the alveoli Exocytosis Water potential and the movement of water by osmosis The effect of solutions of different water potentials on animal and plant tissue The fluid mosaic model The plasma cell membrane and the function of its components As well as covering the current topic, the design of this lesson has been conscious to include future topics. For example, a cholinergic synapse was used to challenge the students to spot examples of facilitated diffusion, simple diffusion, active transport and exocytosis. Revision lessons for the other 18 topics are uploaded on TES or are in the process of being uploaded.

This lesson guides students through the use of genetic diagrams to solve problems involving monohybrid and dihybrid crosses. The engaging PowerPoint and accompanying worksheets have been designed to cover the part of topic 16.2 (b) of the CIE A-level Biology specification which involves the inheritance of one or two genes As you can see from the cover image, this lesson uses a step by step guide to go through each important stage of drawing the genetic cross. Extra time is taken over step 2 which involves writing out the different possible gametes that a parent can produce. This is the step where students most commonly make mistakes so it is critical that the method is understood. Helpful hints are also given throughout, such as only writing out the different possible gametes in order to avoid creating unnecessary work. Students are shown how to answer an example question so that they can visualise how to set out their work before they are challenged to try two further questions. This first of these is differentiated so that even those students who find this very difficult are able to access the learning. The final question will enable the students to come up with the ratio 9:3:3:1 and they will be shown how they can recognise when this should be the expected ratio as this links to the chi-squared test which is covered later in the topic.

This fully-resourced lesson looks at the contribution of environmental and genetic factors to phenotypic variation. The engaging PowerPoint and accompanying worksheets have been designed to cover point 6.1.2 (a) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply an understanding of how mutations and meiosis and the lack of availability of ions can cause variation within a species. Students are challenged at the start of the lesson to recognise the terms phenotype and species from their definitions in order to begin a discussion on the causes of the phenotypic variation within a species. Moving forwards, students will recall that mutations are the primary source of genetic variation and time is taken to look at the effect of gene and chromosome mutations. Gene mutations were covered earlier in module 6 so these tasks act as a prior knowledge check as students have to recognise the different types of gene mutations and explain their effects on the primary structure with reference to the genetic code. These prior knowledge checks are found throughout the lesson and challenge the knowledge of other topics that include photosynthesis and meiosis. The karyotype of an individual who has Down syndrome is used to introduce chromosome mutations and students will be introduced to the different types, with a focus on non-disjunction. The key events of meiosis that produce variation (crossing over and independent assortment) are explored and students will be given a mathematical formula to use to calculate the number of chromosome combinations in gametes and in the resulting zygote. The final part of the lesson looks at chlorosis and how an environmental factor can prevent the express of a gene. If you would like a lesson that goes into chromosome mutations in even greater detail, please search for the uploaded lesson on that topic which complements this lesson

This fully-resourced lesson guides students through the use of the Hardy-Weinberg equation to see whether a change in allele frequency is occurring in a population over time. The detailed PowerPoint and differentiated practice questions worksheets have been designed to cover point 4.5 (i) of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification which expects students to be able to use this mathematical equation The lesson begins by looking at the equation and ensuring that students understand the meaning of each of the terms. The recessive condition, cystic fibrosis, is used as an example so that students can start to apply their knowledge and assess whether they understand which genotypes go with which term. Moving forwards, a step-by-step guide is used to show students how to answer a question. Tips are given during the guide so that common misconceptions and mistakes are addressed immediately. The rest of the lesson gives students the opportunity to apply their knowledge to a set of 3 questions, which have been differentiated so that all abilities are able to access the work and be challenged

This fully-resourced lesson looks at how errors in DNA replication can give rise to gene mutations and then links to an earlier topic by exploring how these base changes can affect the primary structure of a polypeptide. The engaging and detailed PowerPoint and accompanying resources have been designed to cover point 2.12 of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification and constantly refers back to points 2.7, 2.8 and 2.9 which detail the genetic code, genes and the structure of proteins. In order to understand how a change in the base sequence can affect the order of the amino acids, students must be confident in their understanding and application of protein synthesis which was taught in 2.6. Therefore, the start of the lesson focuses on transcription and translation and students are guided through the use of the codon table to identify amino acids. Moving forwards, a quick quiz competition is used to introduce the names of three types of gene mutation whilst challenging the students to recognise terms which are associated with the genetic code and were met in the previous lesson. The main focus of the lesson is base substitutions and how these mutations may or may not cause a change to the amino acid sequence. The students are challenged to use their knowledge of the degenerate nature of the genetic code to explain how a silent mutation can result. The rest of the lesson looks at base deletions and base insertions and students are introduced to the idea of a frameshift mutation. One particular task challenges the students to evaluate the statement that base deletions have a bigger impact on primary structure than base substitutions. This is a differentiated task and they have to compare the fact that the reading frame is shifted by a deletion against the change in a single base by a substitution.

This detailed lesson introduces the four stages of aerobic respiration and looks at the relationship between structure and function of the mitochondrion. The engaging PowerPoint and accompanying resource have been designed to cover points 12.2 (a) and (i) of the CIE International A-level Biology specification which states that students should be able to demonstrate and apply an understanding of the inner and outer mitochondrial membranes, cristae, matrix and mitochondrial DNA. The lesson begins with an introduction to glycolysis and students will learn how this first stage of aerobic respiration is also the first stage when oxygen isn’t present. A version of “GUESS WHO” challenges students to use a series of structural clues to whittle the 6 organelles down to just the mitochondrion so that they can learn how the other three stages take place inside this organelle. Moving forwards, the key components of the organelle are identified on a diagram. Students are introduced to the stages of respiration so that they can make a link to the parts of the cell and the mitochondria where each stage occurs. Students will learn that the presence of decarboxylase and dehydrogenase enzymes in the matrix along with coenzymes and oxaloacetate allows the Link reaction and the Krebs cycle to run. Finally, time is taken to introduce the electron transport chain and the enzyme, ATP synthase, so that students can begin to understand how the flow of protons across the inner membrane results in the production of ATP.

This detailed lesson looks at each of the stages of aerobic respiration and explains how this reaction is a multi-stepped process where each step is controlled by an enzyme. The engaging PowerPoint and accompanying resource have been designed to cover points 7.3 (i) and (ii) of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification. The lesson begins with an introduction to glycolysis and students will learn how this first stage of aerobic respiration is also the first stage when oxygen is not present. This stage involves 10 reactions and an opportunity is taken to explain how each of these reactions is catalysed by a different, specific intracellular enzyme. A version of “GUESS WHO” challenges students to use a series of structural clues to whittle the 6 organelles down to just the mitochondrion so that they can learn how the other three stages take place inside this organelle. Moving forwards, the key components of the organelle are identified on a diagram. Students are introduced to the stages of respiration so that they can make a link to the parts of the cell and the mitochondria where each stage occurs. Students will learn that the presence of decarboxylase and dehydrogenase enzymes in the matrix along with coenzymes and oxaloacetate allows the link reaction and the Krebs cycle to run and that these stages produce the waste product of carbon dioxide. Finally, time is taken to introduce the electron transport chain and the enzyme, ATP synthase, so that students can begin to understand how the flow of protons across the inner membrane results in the production of ATP and the atmospheric oxygen being reunited with hydrogen.

This fully-resourced lesson looks at the structure of genes and explores their role as a base sequence on DNA that codes for the amino acid sequence of a polypeptide. Both the PowerPoint and accompanying resource have been designed to cover point 6.2 (a) of the CIE International A-level Biology specification which states that students should understand how a gene codes for a polypeptide. The lesson begins with a prior knowledge check as the students have to recognise the key term chromosome from a description involving DNA and histones. This allows genes, as sections of a chromosome, to be introduced and the first of a number of quiz rounds is then used to get the students to meet the term locus so that they can understand how each gene has a specific location on a chromosome. Whenever possible, opportunities are taken to make links to the other parts of the CIE specification and this is utilised here as students are reminded that alternative versions of a gene (alleles) can be found at the locus. Moving forwards, students will learn that 3 DNA bases is a triplet and that each triplet codes for a specific amino acid. At this point, the genetic code is introduced and students are challenged to explain how the code contains 64 different triplets. By comparing this number against the number of different amino acids in proteins, students will see how each amino acid is encoded for by more than one triplet and how this explains the degenerate nature of the genetic code which forms a link to an upcoming lesson on gene mutations.

This detailed lesson describes the structure of a nucleotide including the structure of the phosphorylated nucleotide, ATP. The engaging PowerPoint has been designed to cover point (a) of topic 6.1 as detailed in the CIE International A-level Biology specification and links are made throughout to earlier topics such as biological molecules as well as to upcoming topics like DNA structure and replication. Students were introduced to the term monomer and nucleotide in topic 2, so the start of the lesson challenges them to recognise this latter term when only the letters U, C and T are shown. This has been designed to initiate conversations about why only these letters were used so that the nitrogenous bases can be discussed later in greater detail. Moving forwards, students will learn that a nucleotide is the monomer to a polynucleotide and that deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) are two examples of this type of polymer. The main part of the lesson has been filled with various tasks that explore the structural similarities and structural differences between DNA and RNA. This begins by describing the structure of a nucleotide as a phosphate group, a pentose sugar and a nitrogenous base. Time is taken to consider the details of each of these three components which includes the role of the phosphate group in the formation of a phosphodiester bond between adjacent nucleotides on the strand. At this point students are challenged on their understanding of condensation reactions and have to identify how the hydroxyl group associated with carbon 3 is involved along with the hydroxyl group of the phosphoric acid molecule. A number of quiz rounds are used during this lesson, as a way to introduce key terms in a fun and memorable way. One of these rounds introduces adenine and guanine as the purine bases and thymine, cytosine and uracil as the pyrimidine bases and the students are shown that their differing ring structures can be used to distinguish between them. The remainder of the lesson focuses on ATP as a phosphorylated nucleotide and links are made to the hydrolysis of this molecule for energy driven reactions in cells such as active transport

This fully-resourced lesson describes how magnification and resolution can be achieved using light and electron microscopy. The engaging PowerPoint and accompanying resources have been designed to cover the content of points 3.7 (i) & (ii) of the Edexcel International A-level Biology specification and also considers how specimens are stained. To promote engagement and focus throughout this lesson, the PowerPoint contains a quiz competition with 7 rounds. The quiz rounds found in this lesson will introduce the objective lens powers, the names of the parts of a light microscope and emphasise some of the other key terms such as resolution. The final round checks on their understanding of the different numbers that were mentioned in the lesson, namely the differing maximum magnifications and resolutions. Time is taken to explain the meaning of both of these microscopic terms so that students can recognise their importance when considering the organelles that were met earlier in topic 3. By the end of the lesson, the students will be able to explain how a light microscope uses light to form an image and will understand how electrons transmitted through a specimen or across the surface will form an image with a TEM or a SEM respectively.

This fully-resourced lesson describes the role of mitosis and the cell cycle in producing genetically identical daughter cells. The detailed PowerPoint and accompanying resources have been designed to cover point 3.14 of the Edexcel International A-level Biology specification and explains the importance of these cells for growth and asexual reproduction. In an earlier lesson covering meiosis (3.10), students were introduced to the different phases and structures involved in the cycle so this lesson builds on that by providing greater detail of the key events in each phase. Beginning with a focus on interphase, the importance of DNA replication is explained so that students can initially recognise that there are pairs of identical sister chromatids and then can understand how they are separated later in the cycle. A quiz competition has been written into the lesson and this runs throughout, challenging the students to identify the quantity of DNA in the cell (in terms of n) at different points of the cycle. The main part of the lesson focuses on prophase, metaphase, anaphase and telophase and describes how the chromosomes behave in these stages. Students will understand how the cytoplasmic division that occurs in cytokinesis results in the production of genetically identical daughter cells. This leads into a series of understanding and application questions where students have to identify the various roles of mitosis in living organisms as well as tackling a Maths in a Biology context question. The lesson concludes with a final round of MITOSIS SNAP where they only shout out this word when a match is seen between the name of a phase, an event and a picture.

This lesson describes and explains how increasing the concentration of inhibitors affects the rate of an enzyme-catalysed reaction. The PowerPoint and accompanying resource are the last in a series of 4 lessons which cover the content detailed in point 3.2 (a) of the CIE A-level Biology specification but this lesson also covers point 3.2 [c] as competitive and non-competitive inhibitors are introduced and their differing effects on enzyme activity described and explained. The lesson begins with a made up round of the quiz show POINTLESS called “Biology opposites” and this allows students to recognise that inhibition is the opposite of stimulation. This introduces inhibitors as substances that reduce the rate of a reaction and students are challenged to use their general knowledge of enzymes to identify that inhibitors prevent the formation of the enzyme-substrate complex. Moving forwards, a quick quiz competition generates the abbreviation EIC (representing enzyme-inhibitor complex) and this introduces competitive inhibitors as substances that occupy the active site. The students are asked to apply their knowledge to a new situation to work out that these inhibitors must have a similar shape to the enzyme’s substrate molecule. A series of exam-style questions are used throughout the lesson and at this point, the students are challenged to work out that an increase in the substrate concentration would reduce the effect of a fixed concentration of a reversible competitive inhibitor. The rest of the lesson focuses on non-competitive inhibitors and time is taken to ensure that key details such as the disruption of the tertiary structure is understood and biological examples are used to increase the relevance. Again, students will learn that increasing the concentration of the inhibitor results in a greater inhibition and a reduced rate of reaction but that increasing the substrate concentration cannot reduce the effect as was observed with competitive inhibitors.

This fully-resourced lesson describes the the overall reaction of photosynthesis that takes place in the grana and stroma of the chloroplast. The detailed PowerPoint and accompanying resources have been designed to cover points 5.1 & 5.5 in unit 4 of the Edexcel International A-level Biology specification and also describes the relationship between the structure and role of the chloroplast Students will have some knowledge of photosynthesis from iGCSE and were introduced to the ultrastructure of eukaryotic cells in topics 3 and 4 so this lesson has been written to test and to build on that knowledge. A version of the quiz show POINTLESS runs throughout the lesson and this maintains engagement whilst challenging the students to recall the parts of the chloroplast based on a description which is related to their function. The following structures are covered in this lesson: double membrane thylakoids (grana) stroma intergranal lamellae starch grains chloroplast DNA and ribosomes Once each structure has been recalled (or introduced) , a range of activities are used to ensure that key details are understood. As the main focus of the lesson is the reaction of photosynthesis, extra time is taken to introduce the details of the light-dependent and light-independent reactions that take place in the grana and stroma respectively. This includes descriptions of the role of the thylakoid membranes in the light-dependent reactions and the importance of ATP and reduced NADP for the reduction of GP to GALP in the Calvin cycle of the light-independent reactions. Links to other related topics are also made throughout and this is exemplified by the final task of the lesson where students are challenged on their recall of the structure, properties and function of starch (as originally covered in topic 1) As described above, this lesson has been specifically planned to prepare students for the upcoming lessons that cover the details of specification points 5.3 & 5.4 (i) and (ii).

This lesson describes the similarities and differences between the structure, position and function of the xylem, phloem and the sclerenchyma fibres. The engaging and detailed PowerPoint and accompanying resources have been designed to cover point 4.5 in unit 2 of the Edexcel International A-level Biology specification. The lessons begins by challenging the students to identify the substances that a plant needs for the cellular reactions, where they are absorbed and where these reactions occur in a plant. The aim of this task is to get the students to recognise that water and mineral ions are absorbed in the roots and needed in the leaves whilst the products of photosynthesis are in the leaves and need to be used all over the plant. Students will be reminded that the xylem and phloem are part of the vascular system responsible for transporting these substances and then the rest of the lesson focuses on linking structure to function. A range of tasks which include discussion points, exam-style questions and quick quiz rounds are used to describe how lignification results in the xylem as a hollow tube of xylem cells to allow water to move as a complete column. They will also learn that the narrow diameter of this vessel allows capillary action to move water molecules up the sides of the vessel. The same process is used to enable students to understand how the structures of the companion cells allows assimilates to be loaded before being moved to the sieve tube elements through the plasmodesmata. The final part of the lesson introduces the sclerenchyma tissue as part of the vascular bundle and along with the structure and function, the students will observe where this tissue is found in the stem in comparison to the xylem and phloem. It is estimated that it will take in excess of 2 hours of A-level teaching time to cover the detail which has been written into this lesson

This fully-resourced lesson provides examples of anatomical, behavioural and physiological adaptations of organisms to their environment. The engaging and detailed PowerPoint and accompanying resources have been designed to cover point 4.19 in unit 2 of the Edexcel International A-level Biology specification and also describes the concept of a niche and makes continual links to related topics such as natural selection A quick quiz competition at the start of the lesson introduces the different types of adaptation and a series of tasks are used to ensure that the students can distinguish between anatomical, behavioural and physiological adaptations. The Marram grass is used to test their understanding further, before a step by step guide describes how the lignified cells prevent a loss of turgidity. Moving forwards, the students are challenged to explain how the other adaptations of this grass help it to survive in its environment. A series of exam-style questions on the Mangrove family will challenge them to make links to other topics such as osmosis and the mark schemes are displayed to allow them to assess their understanding. The final part of the lesson focuses on the adaptations of the anteater but this time links are made to the upcoming topic of taxonomy so that students are prepared for this lesson on species and classification hierarchy.

This fully-resourced lesson describes the meaning of the terms stem cell, pluripotency, totipotency, morula and blastocyst. The PowerPoint and accompanying worksheets have been designed to cover points 3.17 (i) and (ii) of the Edexcel International A-level Biology specification and contains discussions about the decisions that the scientific community have to make about the use of stem cells in medical therapies. The lesson begins with a knowledge recall of the structure of eukaryotic cells and the students have to use the first letters of each of the four answers to reveal the key term, stem cell. Time is then taken to consider the meaning of cellular differentiation, and this leads into the key idea that not all stem cells are equal when it comes to the number of cell types that they have the potential to differentiate into. A quick quiz round introduces the five degrees of potency, and then the students are challenged to use their understanding of terminology to place totipotency, pluripotency, multipotency, oligopotency and unipotency in the correct places on the potency continuum. Although the latter three do not have to be specifically known based on the content of specification point 3.17 (i), an understanding of their meaning was deemed helpful when planning the lesson as it should assist with the retention of knowledge about totipotency and pluripotency. These two highest degrees of potency are the main focus of the lesson, and key details are emphasised such as the ability of totipotent cells to differentiate into any extra-embroyonic cell, which the pluripotent cells are unable to do. The morula, and inner cell mass and trophoblast of the blastocyst are then introduced and used to demonstrate these differences in potency. The final part of the lesson discusses the decisions that the scientific community have to make about the use of embryonic stem cells, adult stem cells and also foetal stem cells which allows for a link to chorionic villus sampling from topic 2. There is also a Maths in a Biology context question included in the lesson (when introducing the morula) to ensure that students continue to be prepared for the numerous calculations that they will have to tackle in the terminal exams. This resource has been differentiated two ways to allow students of differing abilities to access the work