Primary classroom poster explaining what forces are and how they act. Download this single poster or order a full set of posters for free from the IET Education website.

Primary classroom poster summarising the FIRST LEGO League Discovery programme. Download this single poster or order a full set of posters for free from the IET Education website.

Primary classroom poster summarising the FIRST LEGO League Explore programme. Download the single poster or order a full set of posters for free from the IET Education website.

Primary classroom poster giving a closer look at exploded views and how you can draw them for yourself. Download the single poster or order a full set of posters for free form the IET Education website.

Primary classroom poster giving a closer look at some of the applications of engineering in our everyday lives. Download the single poster or order a full set of posters for free from the IET Education website.

Primary classroom poster showing useful rules to observe when using electricity both in and outside the home. Download the single poster or order a full set of posters from the IET Education website.

Primary classroom poster showing useful rules to observe when using electricity in the home. Download the single poster or order a full set of posters for free from the IET Education website.

Primary classroom poster exploring how information technology is used outside school. Download the single poster or order a full set of posters for free form the IET Education website.

Primary classroom poster highlighting the basic components and symbols in a circuit. Download the single poster or order a full set of posters for free from the IET Education website.

A set of printable resources and guidance notes giving teachers and technicians the basic ingredients to run their very own Faraday Challenge Day. This cross-curricular activity day brings science, design and technology, engineering and maths together in an engaging way. The James Webb Space Telescope challenge is based on the Faraday Challenge of the same name from our 2018/19 season of Faraday Challenge Days. Students are given an engineering brief from Tim Peake (found in the student booklet) where he invites the students to assist the engineering mission of the James Webb Space Telescope team. They will need to demonstrate that they have the engineering skills required to engineer and construct a working prototype of their design and pitch their products to the judges. Designed for six teams of six students (36 students in total) aged 12-13 years (year 8 England, and equivalent), the challenge encourages the development of students’ problem solving, team working and communication skills. This activity day can be tailored to the needs of your school and your students by adapting the PowerPoint presentation and the editable student booklet. Can your students help make a difference as a Faraday James Webb Space Telescope engineer?

Understanding levers and forces This STEM activity aims to develop children’s understanding of levers, specifically the seesaw class lever, one of the simplest forms of machine used to change the magnitude or direction of a force. Making a small seesaw model is a fun-filled way to introduce children to the concepts of levers and forces. By making simple levers, learners will grasp how the effort applied to a lever affects the load. This hands-on project not only sparks their curiosity but also encourages active learning. We’ve created this seesaw scale activity to support the teaching of key topics within design and technology (D&T), maths, and science as part of the primary national curriculum at key stage 2 (KS2). You can use it as a one-off activity or link it with a measurement activity in food technology. Activity: Making the lever Learners will make a simple lever assembly from a binder clip, ruler, two paper cups and sticky tape. Children will also be asked to use a lever to work out the force required to move a load. Learners will compare results and explain their findings. Depending on available resources, this activity could be carried out individually or in small teams. Tools/supplies needed: Rulers Large binder clips Paper cups Sticky tape Weights such as steel nuts, small weights from science or marbles The engineering context Engineers use their understanding of how the effort applied to a lever affects the load in designing a wide range of products. From weighing scales to control pedals in cars, nutcrackers, wheelbarrows, bottle openers, and scissors, levers find their application across various industries. By understanding the seesaw lever class, learners will gain a fundamental insight into the principles that govern these everyday objects. Suggested learning outcomes Through this activity, learners will gain the ability to identify the parts of a lever and understand how the effort applied to a lever affects the load. They’ll also understand the principle of balance in a seesaw lever and how distance from the fulcrum impacts the effort needed to move a load. This will equip them with the foundational knowledge about levers, a key component in KS2 science, and provide a practical context for understanding mathematical concepts like multiplication and equality. Download our activity sheet and other teaching resources for free! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so that you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. Please do share your highlights with us @IETeducation

This fun STEM resource focuses on making shadow puppets while nurturing an understanding of the relationship between light and shadow. We’ve created this shadow puppet experiment to support the teaching of key topics within design and technology (D&T) and science as part of the primary national curriculum at key stage 2 (KS2). This resource focuses on making shadow puppets and developing supporting knowledge about the relationship between light and shadow. This could be used as a one-off activity in D&T or science or linked with the IET primary activity ‘How does the light from a torch change with distance?’, which involves measuring how the distribution of light varies with distance from the light source. It could also be used in conjunction with learning in literacy – for example, creating puppets to perform a story being studied. Activity: Making shadow puppets Learners will make a shadow puppet using card, craft sticks and sticky tape. This not only makes learning about shadow puppets fun but also fosters creativity and storytelling skills among learners at the KS2 level. Tools/supplies needed: Card (photocopies of handouts, if used) Masking tape Craft sticks Tracing paper (for screen) Large boxes (for extension activity) Scissors Torches The Engineering Context Engineers often have to consider how light behaves when designing products for practical applications. For instance, the positioning of windows and artificial lighting in buildings, or the power and placement of lights and mirrors in vehicles, are all influenced by an understanding of light and shadow. This activity will give learners an insight into these considerations. Suggested learning outcomes Light is a type of electromagnetic radiation. Visible light is the range of the electromagnetic spectrum that can be seen with a human eye. Light’s brightness, or intensity, is typically measured as the power per unit area. Any object that blocks the path of light causes a shadow. This activity therefore offers a blend of scientific learning, practical skills, and creative expression, making it a comprehensive educational experience. Specifically, children will learn that blocking the path of light causes a shadow, and they’ll be able to use scissors to make a graphic product. Download our activity sheet and other teaching resources All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. Please do share your highlights with us @IETeducation.

Carry out an experiment to measure how the light from a torch changes with the distance from a lamp In this activity learners will carry out an experiment to measure how the light from a torch changes with the distance from the lamp. They will record their results in a table and plot a graph. Activity: How Does the Light from a Torch Change with Distance? This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science, design and technology, and maths (in this case, mainly science). This resource focuses on the investigation of how the light from a torch (flashlight) changes with distance. This activity is designed to be carried out in small groups. It is recommended that the teacher carry out the activity in advance of the lesson, to determine whether the distances suggested give sufficient (or excessive) spread of the light image, as this will be determined by the design of the torch used. It is recommended that new batteries are used in the torch, as the light intensity may be affected by the amount of charge remaining in the batteries. This could be used as a one-off activity in science or linked to maths learning about tables and graphs. This activity will take approximately 40-60 minutes to complete. Tools/resources required Graph paper Masking tape Tape measures Torches/flashlights (with new batteries) Pencils (for extension) laser pointer (for extension) cut-out templates of simple shapes (e.g. square, triangle, circle), mounted on craft sticks The engineering context Engineers need to understand how light behaves when designing products for many practical applications. For example, when designing buildings, they may consider the provision of windows and artificial lighting; and when designing cars, they may consider the power and position of both internal and external lights and the placement of mirrors. Suggested learning outcomes By the end of this activity students will be able to carry out a scientific experiment and they will understand that the distribution of light from a torch changes with distance. Download the activity sheets for free! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Making a device to measure wind speed In this science project, students will construct a Robinson Anemometer using common household materials. Once built, students can use it to measure wind speed either inside with domestic items or outside with the natural environment. This activity can serve as a stand-alone project or as a component of a broader unit on weather or measurement. It is intended for upper Key Stage 2 learners (years 5 and 6). This resource is part of a collection of free STEM resources created to aid in the teaching of the primary national curriculum, especially in the areas of science and design and technology. The purpose of this activity is to aid in teaching key concepts through the construction of a homemade anemometer. Parts and components required: Polystyrene balls, 25 - 40 mm diameter, 1 per anemometer Wood/bamboo skewers, 3 per anemometer Putty (such as Blutack or Whitetak) OR modelling clay (such as clay, Plasticine or Playdough). EITHER 6 paper cups OR 4 paper cups and a plastic water bottle with a sports cap Sticky tape Tools and equipment required: Fans, hair-dryers or other sources of moving air Stop watches Commercial anemometer (for extension activity) The Robinson Anemometer The Robinson Anemometer is a type of cup anemometer, an instrument used for measuring wind speed. It was invented by John Thomas Romney Robinson in 1846 and is named after him. The Robinson Anemometer consists of four hemispherical cups mounted at the end of horizontal arms, which are attached to a vertical shaft. As the cups rotate due to the force of the wind, the speed of the wind can be calculated based on the rate of rotation. The Robinson Anemometer is still widely used today and is considered one of the most accurate and reliable types of anemometers. The engineering context Engineers need to be able to measure the forces that will act on the things they need to design. They need to understand how these measurements are made so that they can be confident that their designs will meet the requirements in practical situations. Suggested learning outcomes By the end of this activity students will have an understanding of what is meant by wind, they will be able to construct a simple mechanical device and they will be able to understand that the linear movement of air can be measured by the rotation of an anemometer. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Learn how to make a homemade single stringed musical instrument in this fun STEM activity for kids This fun STEM activity for kids will show you how to make a homemade musical instrument from card and can be done at home or at school! This is one of a set of free resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on the construction, investigation and testing of a single stringed instrument. In this activity learners will construct a card model of a single stringed instrument. They will test how it works, demonstrating how the tension of the string affects the pitch of the notes produced. This could be used as a one-off activity or as part of a wider unit of work focusing on how sound is produced and heard by the human ear. It could also be used to develop modelling and prototyping skills. Download our activity sheet below for a step-by-step guide on how to construct your homemade instrument. As an optional extension students could evaluate the model they have built and suggest improvements that could be made to it. They could also make a manufactured prototype of a single stringed instrument using woods, metals and/or plastics. Alternatively, they could investigate and research the use of pivots and how these work in mechanical systems. This activity will take approximately 40 – 60 minutes. Tools/resources required Parts and materials: Pieces of card Hollow card boxes Paper fasteners Elastic bands Tools and equipment: Scissors Hole punches The engineering context Engineers need to be able to understand how sound is produced and heard by the human ear. This knowledge could be used when designing musical instruments or products that produce different sounds, such as games for children. Suggested learning outcomes By the end of this activity students will have an understanding of how sound is produced from a stringed instrument. They will also have an understanding of how changing the tightness/tension of a string alters the pitch of the notes produced. Finally, they will be able to construct and test a model of a single stringed instrument. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation https://education.theiet.org/primary/teaching-resources/make-a-homemade-musical-instrument/

How to Draw a Section Drawing This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within design and technology and maths. This resource focusses on creating a section drawing of a product. Different types of drawing are used to communicate different types of information. Section drawings are a type of 2D drawing that show the parts or features inside a product. In effect, a section drawing shows the view as if the product has been cut in half – most typically this is along the longer dimension of the product, such as its length. Section drawings are used to show what the inside of a product looks like and how the parts of a product fit together. Producing a section drawing develops drawing skills, whilst simultaneously allowing concepts such as dimensions, proportion and scale to be introduced in a practical context. In this activity learners will produce a section drawing of a safety helmet worn by cyclists, working in proportion and ideally to scale. This could be used as a one-off activity or linked to other D&T activities, such as product analysis or exploded drawing (especially when using the extension activity, creating a section drawing of a pen). It could also be used in conjunction with the IET Faraday Primary Poster – Section Views. Download the activity sheets for free! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Making a cradle using magnets that repel each other Newton’s cradle uses swinging spheres to show how the conservation of momentum and the conservation of energy works. The device was named after Sir Isaac Newton and designed by French scientist Edme Mariotte. This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on producing a magnetic Newton’s cradle that uses magnets which repel each other instead of the usual metal spheres. This is a great way for students to learn all about magnets and could be used as a one-off activity or as part of a wider unit of work focusing on magnets and magnetism. It can also be used in conjunction with other IET Education resources, developed alongside the School of Engineering at Cardiff University. This activity will take approximately 65-90 minutes. Tools/resources required Circular magnets with holes in the middle (with N and S poles) 150 mm lengths of dowel 75 mm lengths dowel 100 – 120 mm long pieces of string (6 per unit being built) Masking tape Example of a ‘regular’ Newton’s cradle. Scissors Hot glue guns, if appropriate Magnetic forces Magnets are made from materials such as iron and nickel and they have a north pole and a south pole. When the north pole of a magnet is placed near the south pole of another magnet, they will attract each other. When two poles that are the same are placed near each other, they will repel each other. For example, north to north and south to south. The engineering context Engineers need to know the properties of magnets, which materials are magnetic and which materials are non-magnetic. This knowledge could be used when identifying and creating potential solutions to future engineering problems. For example, when developing green transport solutions. Suggested learning outcomes By the end of this activity students will be able to describe magnets as having two poles – north and south, they will understand that magnets either attract or repel each other and they will be able to make and test a ‘magnetic’ Newton’s cradle. Download the free How to make a magnetic Newton’s cradle activity sheet! All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Creating designs for novel products using magnets In this fun STEM activity students will learn about how magnets can be used to attract or repel each other. They will use their knowledge of how they work to identify and sketch design ideas for two novel products that make use of magnets and magnetism. This resource is a great way for KS2 students to learn all about magnets and could be used as a one-off activity or as part of a wider unit of work focusing on magnets and magnetism. It can also be used in conjunction with other IET Education resources, developed alongside the School of Engineering at Cardiff University. This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on identifying and sketching design ideas for innovative products that make use of magnets. This activity could be completed as individuals or in small groups. This activity will take approximately 40-60 minutes to complete. Tools/resources required Bar magnets with N and S poles marked Modelling materials (for extension activity) Pencils, pens and sketching equipment CAD software (for extension activity) Modelling tools and equipment (for extension activity) Magnetic forces Magnets are made from materials such as iron and nickel and they have a north pole and a south pole. When the north pole of a magnet is placed near the south pole of another magnet, they will attract each other. When two poles that are the same are placed near each other, they will repel each other. For example, north to north and south to south. The engineering context Engineers need to know the properties of magnets, which materials are magnetic and which materials are non-magnetic. This knowledge could be used when identifying and creating potential solutions to future engineering problems. For example, when developing green transport solutions. Suggested learning outcomes By the end of this activity students will be able to describe magnets as having two poles, they will understand how magnets attract or repel each other and they will be able to identify and design ideas for products that make use of magnets. Download the free Magnetic forces STEM activity sheet! All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Investigating everyday products to see if they are magnetic In this activity learners will predict whether they think different products are magnetic based on the material that each product is made from. They will then test their theory by using magnets, to see whether or not each product is attracted to a magnet. This resource is a great way for KS2 students to learn all about magnets and could be used as a one-off activity or as part of a wider unit of work focusing on magnets and magnetism. It can also be used in conjunction with the IET Education ‘Magnet Madness’ resource, developed alongside the School of Engineering at Cardiff University. This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on identifying whether everyday products are made from magnetic materials. This activity could be completed as individuals, in pairs or in small groups. Learners could be given all the products at once to test, or the teacher may wish to lead through one product at a time, recapping the key tasks and questions for them to consider as they go through. Discussion topics and key questions for learners can be found on the presentation below and detailed instructions on how to complete the activity can be found on the activity sheet. This activity will take approximately 40-60 minutes to complete. Tools/resources required Magnets Plastic drinks cups 2 pence coins Steel door keys Aluminium drinks cans Steel paper clips Wooden toy cars The engineering context Engineers need to know the properties of magnets, which materials are magnetic and which materials are non-magnetic. This knowledge could be used when identifying and creating potential solutions to future engineering problems. Suggested learning outcomes By the end of this exercise students will know which materials are magnetic and which are not, they will be able to give examples of magnetic and non-magnetic materials and they will be able to test products to see whether they are made from magnetic materials. Download the free How do magnets work? activity sheet! All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Making a maze game from a bottle and a magnet Learners will draw a maze layout on a plastic bottle and use a magnet to guide objects, such as a 1p coin, around the maze. This is a fun STEM challenge that will teach students about how magnets attract certain materials and will show them how to apply this knowledge in an engaging and practical way. This resource could be used as a one-off activity or as part of a wider unit of work focussing on magnets and magnetism. It can also be used in conjunction with other IET Education resources, developed alongside the School of Engineering at Cardiff University. Activity: Magnetic maze STEM challenge This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on developing understanding of magnetic materials by producing a maze game. This activity could be completed as individuals or in small groups depending on the equipment that is available. As an optional extension students could replace the coin with a ball bearing, a paper clip, a plastic coin and a small piece of wood. Which ones work well and which do not? Students could also draw different maze layouts and use different sized bottles to create a range of puzzle products! Alternatively, students could compete with their friends to see who can complete the maze the fastest by timing themselves with stopwatches. Tools/resources required Pre-made exemplar Magnets 1 pence coins (post 1992) Plastic drinks bottles Paper clips (for extension activity) Ball bearings (for extension activity) Plastic coins (for extension activity) Small pieces of wood (for extension activity) Different coloured marker pens Stopwatches (for extension activity) The engineering context Engineers need to know the properties of magnets, which materials are magnetic and which materials are non-magnetic. This knowledge could be used when identifying and creating potential solutions to future engineering problems. Suggested learning outcomes By the end of this exercise students will have an understanding of what makes a material magnetic, they will be able to give examples of magnetic and non-magnetic materials and they will be able to make a maze game using a bottle and a magnet. Download the activity sheets for free! All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation