Designing and making a vehicle to transport an egg in a race In this Easter STEM activity students will design and make a car that can safely carry an egg in a racing event and compete against other designs. This challenge is aimed at secondary school students and could be used as a main lesson activity to teach learners about modelling and prototyping, or as part of a wider scheme of learning covering manufacturing processes and techniques. It could also be used as part of an introduction to aerodynamics. This is one of a set of free resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design and Technology, Engineering and Mathematics. This resource focuses on designing and making a vehicle to transport an egg in a racing event. Download our free activity sheet to see an example of how an egg racer could be made. This could be made to assist the development of workable ideas. This could be used to guide lower ability learners or for learners who produce a design idea that would otherwise not be practical to make. The final vehicles need to be placed on a slight slope for the race. For example, this could be a natural slope, or a plank or board rested on the table. As an alternative to a direct race, the evaluation could be based on the time taken to go down the ramp (which could allow the integration of maths, for example to calculate the average velocity) or determining which vehicle continues furthest along the floor after coming down the ramp. Tools/resources required Card Straws Wooden dowels or skewers with sharp points removed Wheels (wood or card) or plastic bottle tops Card tubes Masking tape Glue Glue guns if available Scissors Rules or rulers for measuring The engineering context Engineers make models and prototypes to test ideas and see how they will work. For example, they will put a model of a car in a wind tunnel to see how aerodynamic the design is. This helps to make designs that use the minimum amount of fuel. Suggested learning outcomes By the end of this fun school project students will be able to design and make a vehicle to transport an egg in a race and they will have an understanding of what is mean by ‘aerodynamics’. Download the free Make a Vehicle for an Egg Race activity sheets, including a bonus crossword using the words from the activity to enhance learning. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

A challenge to protect an egg from breaking after it is dropped from height. In this fun STEM egg drop challenge students will use, make, and assemble a protective structure to save an egg from breaking. This activity is aimed at secondary school students and could be used as a main lesson activity, to teach learners about the strength of structural forms. It could also be used as one of several activities within a wider scheme of learning focusing on gravity. The Egg Drop Challenge is a popular and versatile Easter STEM challenge. It is an exciting and engaging way for children to develop their creative thinking and problem-solving skills. This STEM challenge is one of a series of free resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design and Technology and Engineering. This resource focuses on the egg drop challenge. Sheets of paper are used to make a protective structure to prevent an egg being broken when dropped from height. Once the egg protection frame has been built learners will test their structures by dropping the egg first from 0.5m, then 1m. If your egg survives this fall, how high do you think an egg can be dropped from without breaking? How could you improve your design to make it more effective? If using raw eggs, it is recommended that plastic covering is used on the floor and suitable hand washing facilities are available. One option is to use boiled eggs as these will reduce the mess but still crack on impact. This activity will take approximately 60-90 minutes. Tools/resources required Projector/whiteboard Raw eggs/Boiled eggs Scissors Glue sticks Paper Tissue paper Sticky tape String Plastic bags The engineering context Understanding how structures are used to protect products is an important part of the new GCSE courses in Design and Technology and Engineering. Structures are used to protect many products, ranging from eggs to supplies dropped from aircraft during emergencies. Suggested learning outcomes By the end of this exercise students will know that gravity is a pulling force and they will be able to make a structure to protect an egg dropped from a height. Download the free Egg Drop Challenge activity sheets, including a bonus crossword using the words used in the activity to enhance learning. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

A graphics project that makes an Easter box diorama In this Easter engineering activity for secondary school students’, learners will use net templates to make card parts to allow them to assemble an Easter box diorama. This is a lesson plan for an engaging Easter box diorama project. This could be used as a main lesson activity, to teach learners how to use nets to make useable objects. It could also be used as one of several activities within a wider scheme of learning focussing on the use of maths to understand the use of nets. Alternatively, it can be used as a part of a wider group of resources that use the Easter theme to build knowledge and skills in Design and Technology. This graphics project is one of a series of free resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design and Technology and Mathematics. This resources focusses on the making of Easter boxes using folded card. Nets are used for the box and egg designs. Nets are important as they allow 3D objects to be made when folded. Download the free activity sheet for more detailed instructions and for optional extension work. Also included is a fun bonus wordsearch with words used in the activity to enhance learning. This exercise will take approximately 50 – 80 minutes. Tools/resources required Projector/whiteboard Scissors Glue sticks Card Rulers The engineering context Understanding how nets are used is considered in the making of products and is an important part of the new GCSE courses in Design and Technology and Engineering. Engineers are required to use mathematics knowledge and skills regularly as part of their everyday job. It is therefore essential that they are able to use nets to allow them to make scale models of buildings and other structures. Suggested learning outcomes By the end of this fun graphic design project students will know how nets are used to make Easter boxes. They will also be able to fold and glue parts together to make an Easter diorama box. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Develop an understanding of levers and build a popsicle stick catapult from craft sticks with this free STEM lesson plan. This is an exciting and engaging way to learn about physics and engineering. With the right materials, build a simple yet effective catapult capable of launching chocolate eggs up into the air! This lesson plan is perfect for KS3 students and can be used as a fun one-off main activity to introduce levers. This is one of a set of resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design & Technology, Mathematics and Science. This resource involves making a simple catapult which works as a lever to propel a chocolate or mini egg. This activity will take approximately 50 – 70 minutes to complete. Also included is a fun crossword using words from the activity to promote sticking learning. Tools/resources required Craft sticks (at least 7 per learner) Small elastic bands (at least 7 per learner, plus spares) A teaspoon (metal or plastic) Chocolate mini eggs (or similar) For the extension activity: Pencils (or similar, such as dowel rods) Elastic bands The engineering context Levers are one of the simplest machines and are used in many applications. These include pliers, scissors, brake pedals and wheels and axles. The principles of levers are also used in many applications when designing sports equipment, such as cricket bats, golf clubs and hockey sticks. Suggested learning outcomes After completing this Easter themed engineering resource students will be able to describe the three classes of lever and they will be able to make a structure. Download the free Build a popsicle stick catapult activity sheet! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Link words and numbers and learn how to count forwards and backwards using eggs in this fun Easter maths activity for kids In this fun Easter STEM activity for kids, students will cut out eggs with numbers in words and shells with numbers in figures, then link the two ways of representing numbers. Learners will also have the opportunity to count and carry out some simple sums using the cut outs. This practical maths challenge could be used as a main lesson activity, to teach learners about numbers and counting. This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within Mathematics and Design and Technology. This resource is aimed at learners in reception or early Key Stage 1 and focuses on developing knowledge of the words used to represent numbers. The teacher will first print the activity sheet onto thin card. Learners should then match the eggs and shells and put them in the correct sequence, either forwards or backwards. They could also use these to count forwards or backwards in multiples. As an optional extension, students could also use the eggs as number cards to carry out some sums. Cards with mathematical symbols are included at the end of the handout. These should be cut around the dotted line. If time permits, learners could decorate the eggs and shells. This activity should take approximately 40-60 minutes. Tools/resources required Handouts printed on this card Scissors Colouring pens/pencils Suggested learning outcomes By the end of this Easter maths activity learners will know how numbers are represented by words and they will be able to count forwards and backwards in numbers and multiples up to 100. The engineering context An understanding of numbers is vital for engineers who need to solve lots of interesting problems. For example, they need to know the sizes to make products and communicate these to other people. Electronic engineers use countdown timers to let motorists know when a traffic light will change from red to green, so that that motorists can drive off safely. Download the free Count using eggs activity sheet. Also includes a bonus maze activity. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Learn how to make papier mâché Easter eggs with balloons in this fun STEM activity for kids In this fun Easter STEM activity for kids, students will learn how to use papier mâché and a balloon to make and decorate an Easter egg that they can use as part of their celebrations. This activity is aimed at primary school students and could be used as a main lesson activity to teach learners about making techniques, design creativity and the use of colour, or part of a wider scheme of learning covering graphics-based techniques. There are also potential curriculum links with the Art department and STEAM based activities. This is one of a set of resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design and Technology and Mathematics. This resource focuses on making and decorating a papier mâché Easter egg with different coloured paints. Follow this step-by-step guide to make your very own papier mâché Easter egg. Download our free activity sheet for more detailed instructions, teachers notes and optional extension work. Also included is a fun bonus maze activity. Tools/resources required A balloon Newspaper and white paper Wallpaper paste (flour and water or PVA glue can be used instead) A small plastic pot Scissors Different coloured paints and other materials for decorating, such as foam letters and card borders Suggested learning outcomes By the end of this Easter STEM challenge learners will be able to use papier mâché and a balloon to make an Easter egg model. They will also be able to use colour to decorate a papier mâché based egg and they will be able to show creativity when designing and making products. The engineering context Engineers make product models to test ideas and see how they will work. Papier mâché can be used to make 3D models. Its other applications include masks for the theatre, structures for carnival floats and even disposable fuel tanks for aircrafts! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Learn about 3D structures and make a bunny pop up card in this fun Easter STEM activity for kids In this fun STEM activity for kids, students will learn about graphic products and use templates to help them cut out the parts for a homemade Easter card. This activity is aimed at primary school children and could be used as a main lesson activity, to teach learners about the use of templates. This is one of a set of resources designed to allow students to use Easter themes to develop their knowledge and skills in Design and Technology and Mathematics. This resource focuses on making a graphics project, in this case an Easter pop-up bunny card. The teacher will first print the activity sheet, which can be downloaded below, onto thin card and distribute to the learners. Learners can then follow these steps to make their own homemade Easter bunny pop-up card. Once learners have completed each step for themselves, the teacher can explain why templates are used to make objects and how separate parts are used to make a larger structure. Learners will share their completed Easter pop-up cards with the class. What do you think went well? What could be improved? This activity will take approximately 50 – 80 minutes to complete. Tools/resources required Glue sticks Card (various colours) Scissors Coloured paper The engineering context Engineers use nets and card to allow them to make scale 3D models of buildings and other structures, as well as packaging for products. Suggested learning outcomes By the end of this Easter STEM challenge learners will be able to make and assemble an Easter pop-up card from separate parts. Download the free Make an amazing Easter pop up card activity sheet. Also included is a bonus wordsearch to enhance sticky learning. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Making structures from card and assembling these into baskets In this hands-on STEM activity for kids, students will learn about 3D structures within a graphics projects. The project will involve using templates to help them cut out the parts for an Easter bunny basket. This fun exercise is aimed at primary school children and could be used as a main lesson activity, to teach learners about simple structures made from separate parts. This is one of a set of free resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design and Technology and Mathematics. This resource focuses on building an Easter bunny-shaped basket. The teacher will first print the activity sheet, which can be downloaded below, onto thin card and distribute to the learners. Learners can then follow these steps to build their own DIY Easter bunny basket. Once learners have completed each step for themselves, the teacher can explain how nets are used to make objects and how separate parts are used to make a larger structure. Learners will share their completed bunny baskets with the class. What do you think went well? What could be improved? This activity will take approximately 50 – 80 minutes to complete. Tools/resources required Glue sticks Card Scissors Cotton wool (for the bunny tails) The engineering context Engineers use nets and card to allow them to make scale 3D models of buildings and other structures, as well as packaging for products. Suggested learning outcomes By the end of this STEM challenge learners will be able to understand how structures are made using separate parts and they will be able to make and assemble a bunny basket structure from card parts. Download the free Build an Easter Bunny Basket activity sheet below! Also includes a bonus wordsearch to enhance sticky learning. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Making structures from card strips and assembling these into animal forms In this fun Easter themed STEM activity for kids, students will learn about 3D structures within a graphical project. Learners will build a bunny using card strips from a template. This free resource, aimed at primary school children, could be used as a main lesson activity, to teach learners about simple structures made from separate parts. This is one of a set of resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design and Technology and Mathematics. This resource focuses on building a card structure, to make a bunny. The teacher will first print the free activity sheet, which can be found below, onto thin card and distribute to the learners. Learners can then follow this step-by-step guide to build their own DIY Easter bunny. If time allows learners could decorate their Easter bunnies. They will then share their completed bunnies with the class. This activity will take approximately 50 – 80 minutes. Tools/resources required Build a bunny handout Scissors Glue Colouring pencils/pens (optional to colour in your bunny before assembly) The engineering context Engineers use nets and card to allow them to make scaled 3D models of buildings and other structures, as well as packaging for products. Suggested learning outcomes By the end of this STEM challenge learners will be able to understand how structures are made using separate parts and they will be able to make and assemble a bunny structure from card strips. Download the free Build a bunny activity sheet below! Also includes a bonus worksearch to enhance sticky learning. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Making an Easter bunny puppet with moving arms and legs In this activity students will learn about simple mechanisms using linkages made from paper products. Learners will have an opportunity to use a template to help them cut out the parts for a cardboard Easter bouncing bunny. This fun STEM challenge aimed at primary school children could be used as a main lesson activity, to teach learners about linkages. This is one of a set of resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design and Technology and Mathematics. This resource focuses on building a card structure, which uses linkages to make the limbs of a bunny move. Follow this step-by-step guide to make your own Easter bouncing bunny. Learners will complete each step for themselves. Once everyone has made their bouncing bunny, the teacher will discuss the results of the activity with learners. The teacher will also explain how linkages are used to make objects move. Download the free activity sheet for more detailed instructions, teachers notes and for optional extension work. Also includes a fun bonus activity to enhance sticky learning. This exercise will take approximately 50 – 80 minutes. Tools/resources required Glue sticks Card or cardboard Scissors String Brass fasteners Pencils Erasers/sticky tack Elastic bands The engineering context Engineers must have a good understanding of mechanisms. Mechanisms are used in every machine that has moving parts, from trains, cars, and washing machines to a space rocket. Suggested learning outcomes By the end of this activity students should be able to understand how to use a linkage to create movement and they will be able to make and assemble a bouncing bunny with moving arms and legs. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Create your own digital art Technology has helped to change the way we make art today. Learners can use this resource created with Archives of IT to find out how to take a good photo then create their own digital art using photos they have previously taken or that are available in school. Activity info, teachers’ notes and curriculum links In this activity learners will develop an understanding of some terms used in graphics and art, how to capture digital pictures, and how to edit digital images. This activity could be used as a main lesson activity, to introduce the concept of digital art and increase understanding of the creative approaches of different artists. Alternatively, it could be used to introduce or reinforce how to use a digital camera and image processing software. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery. Downloadable content • Digital photography activity • Digital photography presentation Tools/resources required Digital cameras (or tablets with integrated cameras) Computers / laptops / tablets Image manipulation software, such as Paint or Paintz. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales. To view the videos, please visit the IET Education website

Create a digital painting Using IT to create art might seem like a very new idea, but actually it has been happening for many years! Using this resource created with Archives of IT learners can turn some famous artwork into digital art. Activity info, teachers’ notes and curriculum links In this activity learners will develop an understanding of Piet Mondrian’s abstract geometric art then use paint software to create their own art, inspired by Mondrian’s work. This activity could be used as a main lesson activity, to introduce the concept of digital art and increase understanding of the creative approaches of different artists. Alternatively, it could be used to introduce or reinforce how to use software to create images. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery. Downloadable content • Digital painting activity • Digital painting presentation Tools/resources required Computers / laptops / tablets Paint image manipulation software The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales. To view the videos, please visit the IET Education website

Design and make your own computer game Computer coding is the use of computer programming languages to give computers and machines a set of instructions on what actions to perform. It’s how humans communicate with machines. It’s what allows us to create apps (applications). In this resource created with Archives of IT learners can design and create their own computer game in Scratch then swap and play with their friends! Activity info, teachers’ notes and curriculum links In this activity learners will develop their ability to use coding. This activity could be used as a main lesson activity, to introduce the concept of coding. Alternatively it could be used to introduce or reinforce how to use block coding with Scratch. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery. Downloads • Coding games activity • Coding games presentation • Coding games planning sheet Tools/resources required Computers / laptops / tablets with internet access. Sticky notes. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales. To view the videos, please visit the IET Education website

Record and edit your own interview In this engaging resource written with assistance from Archives of IT learners will find out why it is important for us to interview people and what a good interview looks like, before creating an interview script and recording their own interview which can be played back to the class. Once finished, learners can add music and sound effects to the recording or turn it into a podcast. Activity info, teachers’ notes and curriculum links In this activity learners will develop an understanding of the reasons for interviewing and how to carry out, record and edit an interview. This activity could be used as a main lesson activity to support the development of communication skills in English or an understanding of documenting history. It could also be used to introduce the use of recoding and audio editing software in computing. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery. Downloadable content • Audio editing activity • Audio editing presentation Tools/resources required Writing implements Recording facilities (for example, computer, directional microphone) Sound recording (and editing) software Consent forms printed, as applicable The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.

Use technology to create animation Learners can make their own thaumatrope in this engaging resource developed with assistance from Archives of IT. Thaumatropes are one of the earliest forms of animations, first created in Paris in 1824 by John Ayrton. They work by creating an optical illusion of motion, as the drawings appear to blend into one another when spun. Activity info, teachers’ notes and curriculum links In this activity learners will develop an understanding of animation and produce two different forms of animation. This activity could be used as a main lesson activity, to introduce the concept of digital art and increase understanding of methods of animation. Alternatively it could be used to introduce or reinforce graphics skills or, by selecting an appropriate topic to address as a class, to reinforce learning of a science topic. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery. Downloadable content • Animation activity • Animation presentation • Animation storyboard handout • Animation thaumatrope handout Tools/resources required Paper and colouring implements Scissors Straws or craft sticks Glue sticks Laptop / tablet with access to appropriate stop motion software. Modelling clay or plastic construction bricks (optional, for extension activity) Digital cameras or image capture equipment (optional, for extension activity) The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales. MP4 videos can be viewed on the IET education website

Consider smart or modern textile technologies when making a sports kit This resource focusses on designing a modern, stylish kit for a national team that will be playing at the football World Cup. This STEM activity is one of a series of resources designed to allow learners to use the theme of the football World Cup to develop their knowledge and skills in Design and Technology. Students will consider the colours used in different national flags and existing kits. They will then produce their own design for a national team of their choice, which makes use of smart or modern textiles technologies. Please do remember to share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery.

Designing footwear for sports use Trainers are one of the most commonly worn shoes in our culture. They provide comfortable support for our feet as we go about our active lives as students, athletes, educators and engineers. The design of trainers (and all athletic shoes) is based on how they will be used and is an example of bioengineering. This activity introduces the concept of research through product analysis to support the design process. The main activity involves designing a trainer. Activity info, teachers’ notes and curriculum links In this activity, learners will use the theme of the London Marathon to respond to a design context, investigate existing products for inspiration and design a trainer. This activity could be used as a main lesson activity to develop skills in designing. It could also be used to introduce the review of existing products to inspire design solutions. Tools/resources required Pens, pencils and drawing instruments Variety of trainers/shoes for comparison The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation

Design a sports wheelchair for a Marathon race This activity is focused on the design of racing wheelchairs, but also develops understanding about the use of search engines. It considers the use of different search terms when using internet-based research using search engines and how this affects the outcomes of the search. The main activity involves designing a racing wheelchair considering key aspects to enhance its performance. The first London Marathon wheelchair race took place in 1983 in which 19 people took part with 17 completing the race. The winner, Gordon Perry, set a winning time of just over 3 hours and 20 minutes. With the advancements in engineering and technology since that date, wheelchair racing has come a long way, and in 2021, Marcel Hug won the London Marathon’s men’s wheelchair race setting a new course record with a time of just over 1 hour and 26 minutes! Activity info, teachers’ notes and curriculum links In this activity, learners will use the theme of the London Marathon to respond to a design context, investigate the context on the internet and design a wheelchair for sports use. This activity could be used as a main lesson activity to develop skills in designing. It could also be used to teach learners about how to search the internet effectively to gain the information that is most applicable to their requirements. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery. Tools/resources required Pens, pencils and drawing instruments Computer access for internet searching The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.

Make a map of the route with information about the famous landmarks London is not only one of the busiest cities in the world but is also home to some of the most unique and historical buildings and landmarks that many hundreds of thousands of tourists visit every year. This activity introduces the making of route maps, highlighting key landmarks and information within them, in our capital city. Activity info, teachers’ notes and curriculum links In this activity learners will use the theme of the London Marathon and the making of a route map to highlight key London landmarks. This activity could be used as a main lesson activity, to teach learners about the making of route maps with the highlighting of key landmarks at set distances on the London Marathon. This contributes to learning in geography and developing skills making graphic products in Design & Technology. As part of a wider scheme, it may also be used for the purposes of focusing on the use of maps and how more detailed information may be included in them. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery. Tools/resources required Sticky tape Scissors Rulers Glue sticks Backing card The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.

Designing a charity costume to wear on the day The London Marathon takes place every year and is a great opportunity for charities to raise money to support their causes. Can you design an eye-catching costume that runners can wear whilst taking part? Activity info, teachers’ notes and curriculum links In this activity, learners will use the theme of the London Marathon to design a costume for participants who are raising money for charity. They will consider how modern and smart fabrics could be used in their design, such as those that wick moisture. They will then use their knowledge to develop a suitable outcome to match the given design brief. This could be used as a one-off main lesson activity to develop designing skills in Design & Technology and understanding of fabric types in textiles. Alternatively, it could be used as a part of a wider scheme of work to develop designing and graphical skills in Design & Technology. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your learning highlights and final creations with us on social media @IETeducation or send them via email to IETEducation@theiet.org to be featured in our online gallery. Tools/resources required Paper Pens, pencils and coloured pencils/pens The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.